Electrical and Electronics Commons^™

Cal Poly Wind Power Research Center Power Regulator, Ricardo Rodriguez, Steven Bounchareune

Electrical Engineering

Through funding from the California Central Coast Research Partnership (C3RP) the

CPWRC, led by Dr. Patrick Lemieux, has erected a horizontal axis wind turbine (HAWT) at the

Cal Poly Escuela Ranch site EL04. With the help of Dr. John Ridgely and Dr. Art MacCarley, the team has implemented a controller that delivers the power being generated by the turbine to a resistor bank which maintains a safe working speed for the turbine. The authors objectives for this project are to (1) become familiar with the operation of the turbine, (2) develop an AC-DC converter that regulates the output of the …

The Visual Representation Of Sound For The Hearing Impaired, Jonathan Brophy

Electrical Engineering

There are many difficulties that arise when one is faced with a hearing disability. New applications of advancing technology have the potential to enable designs capable of assisting the hearing impaired with the ability to see sound. This project seeks to provide a user with a visual representation of loud noises detected using small directional microphones. The microphones determine the location of the sound above a set decibel level and a microprocessor determines the approximate location of the sound source and displays a vertical colored bar on a video image in the direction of the noise using virtual reality glasses. …

Pscad Modeling Of One-Cycle Control Var, Andre Keir Azares

Electrical Engineering

Voltage support has been a common problem utilities have faced for many years and although there exists many solutions, the advent of renewable energy devices and electric vehicles make the problem of voltage support an even greater challenge today. The increasing use of electronic devices by consumers also increases the magnitude of dealing with voltage support. A promising new solution to voltage support is seen in One Cycle Control, a new control method that uses a nonlinear feedback technique on power electronics to produce high quality sine waves with fast dynamic response. This control paradigm is seen in its application …

Multiple Input Single Output (Miso) Tablet/ Phone Charger, Kevin Wong

Master's Theses

This thesis entails the design and implementation of a multiple input single output (MISO) DC-DC converter using the flyback topology to charge tablets/ smartphones or any USB powered portable device. The MISO converter will enable the use of various renewable energy sources such as a solar panel/ rechargeable battery combination, bicycle dynamo, hydroelectric power, and wind turbine. This paper will cover the design, simulations, and test results of the MISO converter. The flyback topology was chosen due to its low part count and its efficiency at low power. The proposed converter has a nominal 12V input to output USB 2.0 …

Cal Poly Brocade Challenge 2013, Chandler Morehardt, Alexa Coburn, Juan Silva, Kerry Sun, Greg Wang, Raul Chagoya, Jd Torres

Architectural Engineering

No abstract provided.

Design, Fabrication, And Testing Of An Emr Based Orbital Debris Impact Testing Platform, Jeffrey J. Maniglia Jr.

Master's Theses

This paper describes the changes made from Cal Poly’s initial railgun system, the Mk. 1 railgun, to the Mk. 1.1 system, as well as the design, fabrication, and testing of a newer and larger Mk. 2 railgun system. The Mk. 1.1 system is developed as a more efficient alteration of the original Mk. 1 system, but is found to be defective due to hardware deficiencies and failure, as well as unforeseen efficiency losses. A Mk. 2 system is developed and built around donated hardware from the Naval Postgraduate School. The Mk. 2 system strove to implement an efficient, augmented, electromagnetic …

The Bicycle-Powered Smartphone Charger, Chris Arntzen

Master's Theses

This thesis entails the design and fabrication of a smartphone charger that is powered by a bicycle dynamo hub. In addition to the design and validation of the charger prototype, this thesis involves the testing and characterization of the dynamo hub power source, the design and construction of specialized test equipment, and the design and prototyping of a handlebar-mounted case for the smartphone and charging electronics. With the intention of making the device a commercial product, price, aesthetics, and marketability are of importance to the design. An appropriate description of the charger circuit is a microcontroller-based energy management system, tailored …

Bi-Directional Flyback Dc-Dc Converter For Battery System Of The Dc House Project, Austin J. Luan

Master's Theses

The DC House project strongly relies on renewable energy sources to provide power to the house for various loads. However, when these sources are unable to provide power at a certain time, a back-up energy source from a battery must be readily available to fulfill the house’s power needs. This thesis proposes a bi-directional flyback power converter to allow a single-stage power path to charge the battery from and to discharge the battery to the DC House 48 V system bus. The design, simulation, and hardware prototype of the proposed flyback bi-directional converter will be conducted to demonstrate its feasibility. …

Eye "R" Glasses: Development Of An Infrared Sensor System For Detecting The Human Body, Rick Wong

Master's Theses

Throughout the years, sensors have been an integral part of automation, alert, and medical systems. Many of these systems measure physiological characteristics of the human body to alert themselves of their current conditions. Drowsy driver systems, for instance, measure the eyes and facial movements with a camera to determine if the driver is falling asleep at the wheel. Electroencephalography (EEG), electrooculography (EOG), and electromyography (EMG) employ electrodes on the human body to measure electrical activity of a patient’s REM sleep cycle patterns. Pulse oximeters use optical light through a process called photoplethysmography (PPG) to measure heart rate.

As diverse as …

A Novel Unit Cell Antenna For Highly Integrated Phased Arrays In The Shf Band, Timothy Bryan Ogilvie

Master's Theses

Phased arrays are electromagnetic antenna systems comprised of many radiating elements and processing electronics. Radiating elements are typically positioned in an orderly grid within the antenna aperture. In the receive mode of operation, radiating elements capture some of the signal energy from incoming radiation and guide these signals to processing electronics. Signals are filtered and amplified to maintain the desired sensitivity and complexly weighted using circuits with reconfigurable amplification gain and phase delay. Finally, all signals are combined. The summation of these complexly weighted spatial samples forms a spatial filter in the same way complexly weighted temporal samples establish a …

Multiplicative Feedback Audio Distortion Circuit, Colton Parsons

Electrical Engineering

This circuit aims to distort an audio signal input in a novel and aesthetically pleasing manner. When it comes to the timbre of a note, even harmonics generally sound better than odd harmonics. Most forms of audio signal distortion (usually for electric guitar) primarily add odd harmonics to a signal, as this is easily accomplished by clipping the waveform. This project instead utilizes a signal multiplier in a feedback loop, with one multiplier input coming from the circuit’s input, and the other from the multiplier’s own output. This process creates even harmonics. A delay line is placed in the loop, …

Adaptive Data Acquisition For Communication Networks, Behzad Ahmadi

Dissertations

In an increasing number of communication systems, such as sensor networks or local area networks within medical, financial or military institutions, nodes communicate information sources (e.g., video, audio) over multiple hops. Moreover, nodes have, or can acquire, correlated information sources from the environment, e.g., from data bases or from measurements. Among the new design problems raised by the outlined scenarios, two key issues are addressed in this dissertation: 1) How to preserve the consistency of sensitive information across multiple hops; 2) How to incorporate the design of actuation in the form of data acquisition and network probing in the optimization …

Enabling Sustainable Power Distribution Networks By Using Smart Grid Communications, Chun-Hao Lo

Dissertations

Smart grid modernization enables integration of computing, information and communications capabilities into the legacy electric power grid system, especially the low voltage distribution networks where various consumers are located. The evolutionary paradigm has initiated worldwide deployment of an enormous number of smart meters as well as renewable energy sources at end-user levels. The future distribution networks as part of advanced metering infrastructure (AMI) will involve decentralized power control operations under associated smart grid communications networks. This dissertation addresses three potential problems anticipated in the future distribution networks of smart grid: 1) local power congestion due to power surpluses produced by …

High Performance Digital Signal Processing: Theory, Design, And Applications In Finance, Mustafa Ugur Torun

Dissertations

The way scientific research and business is conducted has drastically changed over the last decade. Big data and data-intensive scientific discovery are two terms that have been coined recently. They describe the tremendous amounts of noisy data, created extremely rapidly by various sensing devices and methods that need to be explored for information inference. Researchers and practitioners who can obtain meaningful information out of big data in the shortest time gain a competitive advantage. Hence, there is more need than ever for a variety of high performance computational tools for scientific and business analytics. Interest in developing efficient data processing …

End-To-End Network Measurement For Wired And Wireless Networks, Khondaker Musfakus Salehin

Dissertations

A number of Internet applications require accurate characterization of different network parameters. There is, therefore, a need to determine whether the networks that carry packets for those applications comply with the requirements. Network measurement provides the means to perform this determination. This work focuses on schemes for measuring several parameters both in wired and wireless environments.

The need of measuring packet processing time (PPT) of the end hosts (i.e., workstations) in a wired network is unveiled. PPT is defined as the time elapsed between the arrival of a packet at the data-link layer and the time when the packet is …

Research On Mppt Methods For Photovoltaic System Based On Microgrid, Jingchu Ji

Theses

This thesis introduces some basic concepts about a microgrid. Then it discusses the structure of photovoltaic system (PVS) which contains a solar panel and simplified PV models. Next, it discusses and compares different methods for Maximum Power Point Tracking (MPPT) with PVS. It presents three types of DC-DC converters -- Buck, Boost and Buck-Boost converter. This work proposes to apply a DC-DC converter of Buck-Boost type to make PVS controllable because this type of converter has the largest range for operational region so that it can get the best result on MPPT. Finally, this thesis presents a kind of new …

Detection Of Video Frame Insertion Based On Constraint Of Human Visual Perception, Lu Zheng

Theses

Recently, due to availability of inexpensive and easily-operable multimedia tools, digital multimedia technology has experienced drastic advancements. At the same time, video forgery becomes much easier and makes more difficult to validate the video content. Consequently, the origin and integrity of video can no longer be taken for granted. A methodology is developed that is capable of detecting the video frame insertion based on the constraint of human visual perception. The main idea is based on the so-called differential sensitivity. That is, that the variation of brightness of neighboring video frames has some constraint. First, the video sequence is partitioned …

Model Predictive Control For Building Temperature Regulation, Weiqiang Dong

Theses

With the rapid increase in human consumption of energy, global warming is becoming an urgent problem. According to the past research, a significant part of greenhouse gas release and electricity consumption has been connected to buildings. Heating systems are the major contributor to high energy consumption of buildings. Better methods for decreasing energy consumption of buildings should be proposed and applied.

Model predictive control is widely used in building temperature regulation. Each model predictive control has its advantage. Through the comparison of several methods, this thesis discusses their respective features. The combination of a Matlab-based modeling system CVX and model …

Spice Netlist Generation For Electrical Parasitic Modeling Of Multi-Chip Power Module Designs, Peter Tucker

Electrical Engineering Undergraduate Honors Theses

Multi-Chip Power Module (MCPM) designs are widely used in the area of power electronics to control multiple power semiconductor devices in a single package. The work described in this thesis is part of a larger ongoing project aimed at designing and implementing a computer aided drafting tool to assist in analysis and optimization of MCPM designs. This thesis work adds to the software tool the ability to export an electrical parasitic model of a power module layout into a SPICE format that can be run through an external SPICE circuit simulator. The code was implemented in python using NetworkX graphs …

Synthesis Of Rhenium And Manganese Pyridazoal Complexes, Jesse Evans

Masters Theses & Specialist Projects

Pyridazines are a heterocyclic aromatic compound containing a characteristic N-N bond that are utilized in many fields, including medicine and electronics. It is this latter field that Dr. Snyder's research group is focused upon. Organometallic compounds are a better conducting material than the current inorganic compounds used in electronics due to better conductance of electricity, lower production cost, and the ability to be formed into thin films. With this in mind, Dr. Snyder's research group has set out to synthesize organometallic compounds for this purpose. Following procedures set forth by Snyder etc, and altered to form an off-metal route, we …

Secure Localization Topology And Methodology For A Dedicated Automated Highway System, Bhaswati Deka

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In today’s fast-paced world, mobility is a very important factor in improving the quality of living. The purpose of an automated transportation system (ATS) is to provide mobility to one and all, irrespective of their capabilities. An ATS requires a lot of planning to be efficient and safe for public use. One of the main aspects of safety is to determine the location of the individual vehicles within the system and ensure that their location is not posing any hazard to other vehicles in the system or any other entity outside the system. The process of determining or verifying the …

Synthesis And Characterization Of Iron Pyrite Nanocrystals For Photovoltaic Devices, Scott Curtis Mangham

Graduate Theses and Dissertations

Iron pyrite nanocrystals have been synthesized using a hot-injection method with a variety of amines and characterized with properties necessary for photovoltaic devices. The iron pyrite nanocrystals were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, optical absorption, micro-Raman, and micro-Photoluminescence. The optical absorbance spectra showed the large absorption in the visible and near infrared spectral range for the nanocrystals as well as to show the band gap. The face-centered cubic crystal structure of the iron pyrite nanocrystals was shown by matching the measured X-ray diffraction pattern to a face-centered cubic iron pyrite reference pattern. Using Bragg's law …

Design And Implementation Of Wireless Point-Of-Care Health Monitoring Systems: Diagnosis For Sleep Disorders And Cardiovascular Diseases, Se Chang Oh

Graduate Theses and Dissertations

Chronic sleep disorders are present in 40 million people in the United States. More than 25 million people remain undiagnosed and untreated, which accounts for over $22 billion in unnecessary healthcare costs. In addition, another major chronic disease is the heart diseases which cause 23.8% of the deaths in the United States. Thus, there is a need for a low cost, reliable, and ubiquitous patient monitoring system. A remote point-of-care system can satisfy this need by providing real time monitoring of the patient's health condition at remote places. However, the currently available POC systems have some drawbacks; the fixed number …

Modeling And Analysis Of A Dynamic Voltage Regulator, Timothy David Haskell

Master's Theses

Increased government funding and incentives in recent years has led to an increase in the number of grid-tied renewable energy sources as their economic benefits become more renowned. Unfortunately, the outputs of these renewable resources are often highly variable, resulting in undesirable voltage disruptions that are harmful to sensitive loads. In addition to the energy variability of renewable energy sources, random voltage sags, swells and disruptions are already a major issue in power systems. Recent advances in power electronic devices have provided a platform for new solutions to the voltage support problem in power systems. One promising solution is the …

Intermediate Band Solar Cells Based On Inas Quantum Dots Embedded In Ingaas Quantum Well, Ramesh Vasan

Graduate Theses and Dissertations

Intermediate band solar cells based on quantum dots and quantum wells with anti-reflection coating are investigated in this thesis. The demand for high efficient solar cells as an alternate source of energy is the main motivation for this research project. Intermediate band solar cells based on quantum dots were the subject of intensive research in recent years. High power conversion efficiency was predicted from InAs/GaAs intermediate band solar cells as the presence of InAs quantum dots increased the absorption below the band gap of the host material.

In this thesis, an attempt has been made to further increase the absorption …

Synthesis Of Optimized Inp/Zns Core/Shell Nanocrystals And Tio2 Nanotubes For Quantum Dot Sensitized Solar Cells, Seungyong Lee

Graduate Theses and Dissertations

Synthesis of InP/ZnS core/shell nanocrystals and TiO₂ nanotubes and the optimization study to couple them together were explored for quantum dot sensitized solar cells. Its intrinsic nontoxicity makes the direct band gap InP/ZnS core/shell be one of the most promising semiconductor nanocrystals for optoelectric applications, with the advantage of tuning the optical absorption range in the desired solar spectrum region. Highly luminescent and monodisperse InP/ZnS nanocrystals were synthesized in a non-coordinating solvent. By varying the synthesis scheme, different size InP/ZnS nanocrystals with emission peaks ranging from 520 nm to 620 nm were grown. For the purpose of ensuring air …

Industrial Wireless Communication System For Notification, Jolica Dias, Devin Semrau, Jumana Abukabbos

Honors Theses

An industrial wireless communication system for short structured messages was needed to support lean manufacturing environments. While first generation prototypes of end devices were previously constructed for the network, it lacked the range, robustness and battery operation desired. The advances made in the new system incorporate multiple small rechargeable user modules that communicate with and through one or more higher powered fixed location message router stations. This configuration ensures that wireless signal integrity is maintained throughout an industrial facility, and that the messages are successfully sent and received. XBee wireless transceivers were imbedded onto the router to enable communication between …

Plug-In Hybrid Vehicle (Phev) Component Pre-Heater, Ria Pereira

Honors Theses

In plug-in hybrid electric vehicles, the optimum temperatures of the cabin and various fluids are achieved through the dissipating heat of the internal combustion engine. In colder climates the initial warm-up of components requires the internal combustion engine to run causing unnecessary consumption of fuel. This project improved the pre-heating system formerly in place. It uses a variety of electric heaters along with the positive temperature coefficient (PTC) heater and blower motor already installed on the vehicle. A system utilizing a microcontroller turns the heaters on and off based on the inputs from the temperature sensors installed on the vehicle. …

Comparative Study Of Artificial Lighting Systems With Different Fixtures Considering Daylight Availability, Leticia Niero Moraes, Anderson Claro

CIBSE & SLL International Lighting Conference, Dublin, 2013

The use of daylight is indicated as a primary factor in energy savings of buildings, since it can reduce the use of electric lighting through control systems. However, the efficiency of systems is also associated with technical characteristics and performance of various elements. The positioning of fixtures, as well as its specifications can contribute for environmental comfort and energy conservation. Such concerns, however, are not part of the currently established practice of lighting design professionals. Considering this gap, this paper seeks to develop a study that addresses the integration of natural and electric light. The methodology is based on evaluating …

Helping To Explain Lighting Quality & Energy Efficiency To Non-Experts, Anna Whittaker, Julie Gore, Stuart Mucklejohn

CIBSE & SLL International Lighting Conference, Dublin, 2013

CIBSE & SLL International lighting Conference