Electrical and Electronics Commons^™

Integration Of Antenna Array With Multicrystalline Silicon Solar Cell, Oisin O'Conchubhair, Patrick Mcevoy, Max Ammann

Articles

The integration of a low-profile antenna array with a multicrystalline silicon solar cell capable of powering a low-power wireless sensor at 2.45 GHz is reported. Lattice bus bars on the cell are exploited to minimize antenna shadows from low-profile antennas and transmission lines for a higher output power. The dual inverted-F array improves gain, and beam switching enables the array to sweep a wider coverage angle with larger beamwidths compared to other solar integrated antennas.

A Low-Cost Loop Measurement Tool For Dc-Dc Converters, Shouee B. Lin

Master's Theses

Loop measurements are very important in evaluating dynamic performance of DC-DC converters. In this thesis, a small loop measurement tool as a low-cost alternative to a network analyzer is proposed. The tool is particularly useful when a network analyzer is not always available for use, for example when engineers are working on-site with customers or when a network analyzer is not affordable due to their relatively high cost. The design, simulation, and hardware implementation of the inexpensive loop measurement tool will be presented in this thesis. Results from computer simulation and hardware prototype demonstrate the ability of the proposed tool …

Secure Transmission Of Static And Dynamic Images Via Chaotic Encryption In Acousto-Optic Hybrid Feedback With Profiled Light Beams, Monish Ranjan Chatterjee, Fares S. Almehmadi

Electrical and Computer Engineering Faculty Publications

Secure information encryption via acousto-optic (AO) chaos with profiled optical beams indicates substantially better performance in terms of system robustness. This paper examines encryption of static and time-varying (video) images onto AO chaotic carriers using Gaussian-profile beams with diffracted data numerically generated using transfer functions. The use of profiled beams leads to considerable improvement in the encrypted signal.

While static image encryption exhibits parameter tolerances within about ±10% for uniform optical beams, profiled beams reduce the tolerance to less than 1%, thereby vastly improving both the overall security of the transmitted information as well as the quality of the image …

Digitally Controlled Zero-Voltage-Switching Quasi-Resonant Buck Converter, Brian R. Luc

Master's Theses

ABSTRACT

Digitally-Controlled Two-Phase Zero-Voltage-Switching Quasi-Resonant Buck Converter

Brian Luc

This thesis entails the design, construction, and performance analysis of a digitally-controlled two-phase Zero-Voltage Switching Quasi-Resonant (ZVS-QR) buck converter. The converter is aimed to address the issues associated with powering CPUs operating at lower voltage and high current. To evaluate its performance, the Two-Phase ZVS-QR buck converter is compared against a traditional Two-Phase buck converter. The design procedure required to implement both converters through utilizing the characterization curve and formulas derived from their circuit configurations will be presented. Computer simulation of the Two-Phase ZVS-QR buck converter is provided to exhibit its …

Optical Properties Of Strain-Engineered Multilayer Si/Sige Nanostructures, Selina Akter Mala

Dissertations

The long carrier radiative lifetimes in indirect band gap semiconductors such as crystalline Si (c-Si) and Ge impede the development of efficient light-emitting devices and lasers. Multilayer Si/SiGe nanostructures are considered to be the strong candidates for efficient and high-speed optoelectronic devices integrated into CMOS platforms. Since c-Si and Ge have a considerable lattice mismatch of ~ 4.2%, Si/Si_1-xGe_x(x < 0.5) nanostructures in the form of nano-layers (NLs) or cluster multilayers (CMs) modify the band structure and create non-uniform strain distribution. Engineering of Si/Si_1-xGe_xnanostructures with the predicted composition and interface abruptness, which controls spatial separation between electrons and holes and carrier radiative recombination rate, is critical in producing the desired fast and efficient photoluminescence …

Petri Net Models Of Microgrids With Distributed Generators, Xiaoyu Lu

Theses

This thesis introduces some basic concepts and control methods about a microgrid. Then, two hot issues are investigated. One is how to control multiple distributed generators; and another is how to model both discrete event and continuous behaviors of a microgrid. To address these two issues, this thesis work applies Petri nets to both modeling and control of a microgrid. Ordinary Petri nets, hybrid Petri nets, and finite capacity Petri nets, are introduced with their examples targeted at modeling the behavior of a microgrid. Coordination control of multiple distributed generators based on a Petri net model is proposed. Compared with …

Computer Aided Analysis Of Skin Lesions, Sukanya Panja

Theses

Effective screening to detect the skin cancer accurately in the early stage is essential for reducing the mortality of skin cancer. Surface features, such as texture and pigmentation area from the surface, epi-illumination images of the skin lesions have been well correlated to detect skin cancer. An increase in the lesion's subsurface blood volume has been correlated to early diagnosis of malignant melanoma. A method for estimating the optimal features is obtained. The optimal features help in accurately classify the skin lesion in various grades. To make the process faster these optimal features are clustered. The optimal clusters are obtained …

An Embedded System Supporting Dynamic Partial Reconfiguration Of Hardware Resources For Morphological Image Processing, Gyana Ranjan Sahu

Theses

Processors for high-performance computing applications are generally designed with a focus on high clock rates, parallelism of operations and high communication bandwidth, often at the expense of large power consumption. However, the emphasis of many embedded systems and untethered devices is on minimal hardware requirements and reduced power consumption. With the incessant growth of computational needs for embedded applications, which contradict chip power and area needs, the burden is put on the hardware designers to come up with designs that optimize power and area requirements.

This thesis investigates the efficient design of an embedded system for morphological image processing applications …

Reliability Study Of Zr And Al Incorporated Hf Based High-K Dielectric Deposited By Advanced Processing, Md Nasir Uddin Bhuyian

Dissertations

Hafnium-based high-x dielectric materials have been successfully used in the industry as a key replacement for SiO₂ based gate dielectrics in order to continue CMOS device scaling to the 22-nm technology node. Further scaling according to the device roadmap requires the development of oxides with higher x values in order to scale the equivalent oxide thickness (EOT) to 0.7 nm or below while achieving low defect densities. In addition, next generation devices need to meet challenges like improved channel mobility, reduced gate leakage current, good control on threshold voltage, lower interface state density, and good reliability. In order to …

Electron-Beam Patterning Of Teflon Af For Surface Plasmon Resonance Sensing, Mansoor A. Sultan

Theses and Dissertations--Electrical and Computer Engineering

Variable pressure electron beam etching and lithography for Teflon AF has been demonstrated. The relation between dose and etching depth is tested under high vacuum and water vapor. High resolution structures as small as 75 nm half-pitch have been resolved. Several simulation tools were tested for surface plasmon excitation. Grating based dual mode surface plasmon excitation has been shown numerically and experimentally.

Resource Allocation And Load-Shedding Policies Based On Markov Decision Processes For Renewable Energy Generation And Storage, Edwards Jimenez

Electronic Theses and Dissertations

In modern power systems, renewable energy has become an increasingly popular form of energy generation as a result of all the rules and regulations that are being implemented towards achieving clean energy worldwide. However, clean energy can have drawbacks in several forms. Wind energy, for example can introduce intermittency. In this thesis, we discuss a method to deal with this intermittency. In particular, by shedding some specific amount of load we can avoid a total system breakdown of the entire power plant. The load shedding method discussed in this thesis utilizes a Markov Decision Process with backward policy iteration. This …

Design Of Novel Devices And Circuits For Electrostatic Discharge Protection Applications In Advanced Semiconductor Technologies, Zhixin Wang

Electronic Theses and Dissertations

Electrostatic Discharge (ESD), as a subset of Electrical Overstress (EOS), was reported to be in charge of more than 35% of failure in integrated circuits (ICs). Especially in the manufacturing process, the silicon wafer turns out to be a functional ICs after numerous physical, chemical and mechanical processes, each of which expose the sensitive and fragile ICs to ESD environment. In normal end-user applications, ESD from human and machine handling, surge and spike signals in the power supply, and wrong supplying signals, will probably cause severe damage to the ICs and even the whole systems. Generally, ESD protections are evaluated …

A Collaborative Adaptive Wiener Filter For Image Restoration Using A Spatial-Domain Multi-Patch Correlation Model, Khaled M. Mohamed, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

We present a new patch-based image restoration algorithm using an adaptive Wiener filter (AWF) with a novel spatial-domain multi-patch correlation model. The new filter structure is referred to as a collaborative adaptive Wiener filter (CAWF). The CAWF employs a finite size moving window. At each position, the current observation window represents the reference patch. We identify the most similar patches in the image within a given search window about the reference patch. A single-stage weighted sum of all of the pixels in the similar patches is used to estimate the center pixel in the reference patch. The weights are based …

Proactive Conversation, 3d Printing, And An Old Nintendo, Tesha C. Ellis

UROP Posters

Abstract

One hundred years from now, it would be a true historical treat to be able to showcase 20th and 21st century digital entertainment by presenting video game consoles in mint condition for interactive, educational, play. Arguably, it would be more enlightening and informative for future audiences to be able to physically engage with the electronic artifacts instead of simply observing them behind glass. With the use of 3D technology, components of video game systems can be preserved, and then printed as needed for repairs. It will help keep them functional for future researchers, educators, and enthusiasts.

Boost Battery, Samuel Rauch, Alvin Ng, Lacy Sigman

Electrical Engineering

In modern times, the problem of a depleted battery confronts us too often. Whether it appears with a smartphone or with any other electronic device, the situation frustrates all consumers. This project designs and constructs a compact portable battery charger that charges through kinetic energy. Thus, one can perform everyday activities, such as walking or running, and charge up a backup battery with no extra effort or time. Additionally, an attachable band harvests thermal energy to maximize the amount of clean power generated. Energy harvesting from kinetic motion and thermal differences provide users with power when no actual power suppliers …

Vehicle Tracking And Classification Via 3d Geometries For Intelligent Transportation Systems, William Mcdowell

Electronic Theses and Dissertations

In this dissertation, we present generalized techniques which allow for the tracking and classification of vehicles by tracking various Point(s) of Interest (PoI) on a vehicle. Tracking the various PoI allows for the composition of those points into 3D geometries which are unique to a given vehicle type. We demonstrate this technique using passive, simulated image based sensor measurements and three separate inertial track formulations. We demonstrate the capability to classify the 3D geometries in multiple transform domains (PCA & LDA) using Minimum Euclidean Distance, Maximum Likelihood and Artificial Neural Networks. Additionally, we demonstrate the ability to fuse separate classifiers …

Characterization Of A Spiking Neuron Model Via A Linear Approach, Amirhossein Jabalameli

Electronic Theses and Dissertations

In the past decade, characterizing spiking neuron models has been extensively researched as an essential issue in computational neuroscience. In this thesis, we examine the estimation problem of two different neuron models. In Chapter 2, We propose a modified Izhikevich model with an adaptive threshold. In our two-stage estimation approach, a linear least squares method and a linear model of the threshold are derived to predict the location of neuronal spikes. However, desired results are not obtained and the predicted model is unsuccessful in duplicating the spike locations. Chapter 3 is focused on the parameter estimation problem of a multi-timescale …

Design, Characterization And Analysis Of Component Level Electrostatic Discharge (Esd) Protection Solutions, Sirui Luo

Electronic Theses and Dissertations

Electrostatic Discharges (ESD) is a significant hazard to electronic components and systems. Based on a specific process technology, a given circuit application requires a customized ESD consideration that meets all the requirements such as the core circuit's operating condition, maximum accepted leakage current, breakdown conditions for the process and overall device sizes. In every several years, there will be a new process technology becomes mature, and most of those new technology requires custom design of effective ESD protection solution. And usually the design window will shrinks due to the evolving of the technology becomes smaller and smaller. The ESD related …

Design Of High-Efficiency Rare-Earth Permanent Magnet Synchronous Motor And Drive System, Hanzhou Liu

Electronic Theses and Dissertations

Utilization of renewable energy has become the future trend in the trucking industry. Electrical power generated from renewable energy can replace part of the fuel usage. There is usually limited space for storing on-board battery. Thus, to better utilize the battery power, it becomes critical to have an efficient energy conversion device that can transfer energy from battery to amenities such as air conditioner, microwave, TV, mini refrigerator, etc. In this dissertation, a designed permanent magnet synchronous motor (PMSM) can be such energy conversion device for an electric Auxiliary Power Unit (APU) application, which will have a desired output power …

Optical Fiber Sensors For Smart Composite Materials And Structures, Manjusha Ramakrishnan, Yuliya Semenova, Gerald Farrell, Ginu Rajan

Books/Book chapters

Composite material structures are widely used in the aerospace, marine, aviation, transport, sport/leisure and civil engineering industries. Such composite material structures are frequently subjected to external perturbations and varying environmental conditions, which may cause the structures to suffer from fatique damage and/or failure, and thus require real-time structural health monitoring (SHM). Of necessity, the diagnosis process and condition monitoring of composite structures are usually carried out during their working life. The goal of such diagnosis is to detect, identify, locate, and assess the defects that my affect the safety or performance of a structure.

Arc Flash Hazards Analysis, Zhenyuan Zhang

Electrical Engineering Dissertations - Archive

Annually more than 2000 workers are admitted to hospital burn centers for extensive injuries caused by arc flash accidents. Arc flash incidents occur when unintended electric current flows through air, superheating the air and causes an explosion. Recognizing the significant threat posed by arc flash hazards, IEEE and NFPA have joined forces on an initiative to support research and additional testing to increase the understanding of the arc flash phenomena. Accurately represent all the real applications for arc flash events are very difficult, not only because of their random complex nature, but also because a large number of uncertain variables …

Control System Development And Response Analysis Of An Electronically Actuated Variable-Orifice Nozzle For Agricultural Pesticide Applications, Joe D. Luck, Scott A. Shearer, Michael P. Sama, Santosh K. Pitla

Biosystems and Agricultural Engineering Faculty Publications

The goal of this research project was to further the development of an electromechanically controlled variable-orifice nozzle by creating an electronic control system and then evaluating that system based on step and ramp inputs. The control system was developed in a programming environment that combined an electronic data acquisition system and actuator with pressure and flow sensors. A proportional, variable-gain (based on system pressure) control system was developed to adjust nozzle flow rates to meet target application rates. The constraints were to achieve settling time of less than 1.0 s, overshoot of less than 10% of maximum flow (or minimum …

Skin Detection In Hyperspectral Images, Stephanie Sanchez

Open Access Theses & Dissertations

Hyperspectral imagers collect information of the scene being imaged at close contiguous bands in the electromagnetic spectrum at high spectral resolutions. Hyperspectral images are organized in a data cube where the x and y axes contain spatial information and the z-axis contains spectral information. The number of applications for these imagers has grown over the years as they are now used in various fields (i.e. agriculture, surveillance, chemical imaging, environmental, medical, etc.). Many algorithms are described in the literature for skin detection in color imagery. However increased detection accuracy, in particularly over cluttered backgrounds, and of small targets and in …

Low Power Design Techniques For Data Acquisition, Praveen Kumar Palakurthi

Open Access Theses & Dissertations

Semiconductor technology advancement continues to lead to smaller device geometries. Digital circuits have benefited from the technology scaling whereas analog circuits often suffer in terms of performance and noise immunity. As functionality continues to be integrated onto systems-on-chips, analog circuits consume increasingly more power than digital circuits and the objective of this Dissertation is to explore low power techniques in the context of both digital and analog circuits residing on the same silicon real estate.

As natural signals are in analog form, a necessity exists to convert these into digital form and then back again in order to exploit the …

Synchronization Of Bistatic Radar Using Chaotic Amplitude And Frequency Modulated Signals, Chandra Sekhar Pappu

Open Access Theses & Dissertations

The purpose of this work is to develop a synchronization scheme for bistatic radar that uses a 3-D chaotic system to generate and process wideband AM and FM signals, which allows for the extraction of high range-resolution information from targets. For AM bistatic radar, the setup includes a drive oscillator at the transmitter and a response oscillator at the receiver. The challenge is synchronizing the response oscillator to the drive oscillator with a scaled version of the transmitted signal sr(t, x) = αs t(t, x), where x is a chaotic state variable and α is a scaling factor. Here, α …

Microwave Radiometer (Mwr) Evaluation Of Multi-Beam Satellite Antenna Boresight Pointing Using Land-Water Crossings, For The Aquarius/Sac-D Mission, Bradley Clymer

Electronic Theses and Dissertations

This research concerns the CONAE Microwave Radiometer (MWR), on board the Aquarius/SAC-D platform. MWR's main purpose is to provide measurements that are simultaneous and spatially collocated with those of NASA's Aquarius radiometer/scatterometer. For this reason, knowledge of the MWR antenna beam footprint geolocation is crucial to mission success. In particular, this thesis addresses an on-orbit validation of the MWR antenna beam pointing, using calculated MWR instantaneous field of view (IFOV) centers, provided in the CONAE L-1B science data product. This procedure compares L-1B MWR IFOV centers at land/water crossings against high-resolution coastline maps. MWR IFOV locations versus time are computed …

Electroporation Of Mammalian Cells By Nanosecond Electric Field Oscillations And It's Inhibition By The Electric Field Reversal, Elena C. Gianulis, Jimo Lee, Chunqi Jiang, Shu Xiao, Bennet L. Ibey, Andrei G. Pakhomov

Bioelectrics Publications

The present study compared electroporation efficiency of bipolar and unipolar nanosecond electric field oscillations (NEFO). Bipolar NEFO was a damped sine wave with 140 ns first phase duration at 50% height; the peak amplitude of phases 2-4 decreased to 35%, 12%, and 7% of the first phase. This waveform was rectified to produce unipolar NEFO by cutting off phases 2 and 4. Membrane permeabilization was quantified in CHO and GH₃ cells by uptake of a membrane integrity marker dye YO-PRO-1 (YP) and by the membrane conductance increase measured by patch clamp. For treatments with 1-20 unipolar NEFO, at 9.6-24 …

Integrating Emerging Cryptographic Engineering Research And Security Education, Mehran Mozaffari Kermani, Reza Azarderakhsh

Articles

Unlike traditional embedded systems such as secure smart cards, emerging secure deeply embedded systems, e.g., implantable and wearable medical devices, have larger “attack surface”. A security breach in such systems which are embedded deeply in human bodies or objects would be life-threatening, for which adopting traditional solutions might not be practical due to tight constraints of these often-battery-powered systems. Unfortunately, although emerging cryptographic engineering research mechanisms have started solving this critical problem, university education (at both graduate and undergraduate level) lags comparably. One of the pivotal reasons for such a lag is the multi-disciplinary nature of the emerging security bottlenecks …

Extraction Of Carrier Mobility And Interface Trap Density In Ingaas Metal Oxide Semiconductor Structures Using Gated Hall Method, Thenappan Chidambaram

Legacy Theses & Dissertations (2009 - 2024)

III-V semiconductors are potential candidates to replace Si as a channel material in next generation CMOS integrated circuits owing to their superior carrier mobilities. Low density of states (DOS) and typically high interface and border trap densities (Dit) in high mobility group III-V semiconductors provide difficulties in quantification of Dit near the conduction band edge. The trap response above the threshold voltage of a MOSFET can be very fast, and conventional Dit extraction methods, based on capacitance/conductance response (CV methods) of MOS capacitors at frequencies <1MHz, cannot distinguish conducting and trapped carriers. In addition, the CV methods have to deal with high dispersion in the accumulation region that makes it a difficult task to measure the true oxide capacitance, Cox value. Another implication of these properties of III-V interfaces is an ambiguity of determination of electron density in the MOSFET channel. Traditional evaluation of carrier density by integration of the C-V curve, gives incorrect values for Dit and mobility. Here we employ gated Hall method to quantify the Dit spectrum at the high-κ oxide/III-V semiconductor interface for buried and surface channel devices using Hall measurement and capacitance-voltage data. Determination of electron density directly from Hall measurements allows for obtaining true mobility values

3d Integration With Coaxial Through Silicon Vias, Stephen Adamshick

Legacy Theses & Dissertations (2009 - 2024)

3D integration using through-silicon-vias (TSVs) is gaining considerable attention due to its superior packaging efficiency resulting in higher functionality, improved performance and a reduction in power consumption. In order to implement 3D chip designs with TSV technology, robust TSV electrical models are required. Specifically, due to the increase of signal speeds into the gigahertz (GHz) spectrum, a high frequency electrical characterization best describes TSV behavior.