Electrical and Electronics Commons^™

Isolation And Molecular Weight Characterization Of Tetragonula Laeviceps Honey Protein, Muhamad Sahlan, Nurul Azizah, Kazuaki Hakamada, Keiichi Noguchi, Masafumi Yohda

Makara Journal of Technology

The concentration of protein in honey is lower than polysaccharide. However, recently the honey’s protein is intensively studied and it showed that protein also have several biological activities such as antibacterial activity. The purpose of this research is to isolate and characterize Tetragonula laeviceps honey protein by determining the molecular weight. Honey protein of Trigona laeviceps was isolated using ultra-filtration with the membrane’s size of 30 kDa, then concentrated using tube membrane size 10 kDa. Molecular weight was analyzed by SDS PAGE. From the analysis, there was major protein band in honey produced by Tetragona laeviceps identified. The produced molecular …

Prerequisites For Public Acceptance Of Waste-To-Energy Plants: Evidence From Germany And Indonesia, Uwe Lahl, Barbara Zeschmar-Lahl

Makara Journal of Technology

Construction of waste incinerators often encounters resistance from the public. The minimum requirements for the ac- ceptance of these installations include modern air pollution control (APC) technology and safe disposal of residues. Confidence in the statements of government and government agencies as well as on those who support is an important point of acceptance. Independent scientific bodies such as universities can help to make this happen. In the case of the installation of waste into energy (WtE), such scientific support can be the measurement of emissions and their evalua- tion. Many products that enter the waste stream contain heavy metals, …

Hybrid Brain-Computer Interface: A Novel Method On The Integration Of Eeg And Semg Signal For Active Prosthetic Control, Reza Darmakusuma, Ary Setijadi Prihatmanto, Adi Indrayanto, Tati Latifah Mengko

Makara Journal of Technology

This paper describes a novel method for controlling active prosthetics by integrating surface electromyography (sEMG) and electroencephalograph signals to improve its intuitiveness. This paper also compares the new method (RTA-2) with other existing methods (AND and OR) for controlling active prosthetics. Based on analysis, RTA-2 features higher true positive rate (TPR) and balanced accuracy (BA) than AND method. On the other hand, the new method (RTA-2) yields lower false detection rate (FPR) than OR method. Analysis also shows that RTA-2 possesses equal TPR, FPR, and BA with the detection of movement intention using sEMG-based system. Although the RTA-2 method shows …

Study Of Mm-Wave Microstrip Patch Array On Curved Substrate, Zeeshan Ahmed, Kansheng Yang, Patrick Mcevoy, Max Ammann

Conference papers

A millimetre wave rectangular microstrip patch antenna array for fifth generation communications (5G) applications is presented. With the increase in demand for high data rates and capacity, there is a need to include mm-Wave frequencies for 5G. The 4×2 patch array is simulated and fabricated on a Rogers RT/Duroid 5880 substrate with a thickness of 0.25 mm. The effects of bending the substrate on the antenna performance are also presented. The experimental results show a fractional bandwidth and gain of more than 3% and 16.1 dBi, respectively.

Fusion Of Audio And Visual Information For Implementing Improved Speech Recognition System, Vikrant Satish Acharya

Masters Theses

Speech recognition is a very useful technology because of its potential to develop applications, which are suitable for various needs of users. This research is an attempt to enhance the performance of a speech recognition system by combining the visual features (lip movement) with audio features. The results were calculated using utterances of numerals collected from participants inclusive of both male and female genders. Discrete Cosine Transform (DCT) coefficients were used for computing visual features and Mel Frequency Cepstral Coefficients (MFCC) were used for computing audio features. The classification was then carried out using Support Vector Machine (SVM). The results …

Structural And Photoluminescence Properties Of Zno Thin Films Deposited By Ultrasonic Spray Pyrolysis, Iwan Sugihartono, Erfan Handoko, Vivi Fauzia, Artoto Arkundato, Lara Permata Sari

Makara Journal of Technology

Zinc oxide (ZnO) thin films on a silicon (Si) (111) substrate were grown herein using ultrasonic spray pyrolysis at 450 °C with different Zn concentrations. The ZnO thin films had X-ray diffraction patterns of a polycrystalline hexagonal wurtzite structure. The (002) and (101) peak intensities changed under different Zn concentrations. Furthermore, according to Scherer's and Stokes–Wilson equations, the crystallite size and the internal strain of the ZnO thin films in the (002) and (101) peaks changed with the Zn concentration. Optically, the photoluminescence spectra indicated that the ratio of the UV/GB emission of the ZnO thin films was the highest …

Real-Time Audio-Midi Controller, Brian Shino Balberchak

Computer Engineering

Most MIDI controllers used in music production use a regular keyboard to generate the MIDI notes that are sent to the synthesizer. This project aims to provide the user with a different way of generating MIDI data: by playing an instrument of their choice with a passive electronic pickup to generate MIDI notes that correspond with the fundamental frequency of the musical pitch being played. The pitch-detecting algorithm used in this application utilizes a modified form of auto-correlation.

As an embedded systems project that uses signal-processing techniques, the knowledge of topics from the following courses was essential:

EE 211: Op-Amp …

An Exploratory Study Of Sukuk Utilisation For Transportation Infrastructure Development In Indonesia, Fiona Lamari, Ayomi Dita Rarasati, Meilia Evita

Makara Journal of Technology

Investment in infrastructure is one of the principal drivers of the growth of the economy. For that reason, the Indonesian government has proposed an investment budget in the railway and sea and air transport sectors over the next 10 years. In order to overcome the burden of direct outflows and for the future, a study was conducted to lay down the framework of Shariah-compliant payments for the development of infrastructure in Indonesia in the transport sector. This paper aims to explore the opportunity and implementation of sukuk utilisation to develop transportation infrastructure. Secondary data study and interviews were selected for …

Seismic Response Analysis Along The Coastal Area Of Bengkulu During The September 2007 Earthquake, Lindung Zalbuin Mase

Makara Journal of Technology

A strong earthquake of 8.4 Mw occurred at the Sumatra Subduction Zone in September 12, 2007. The area that underwent the impact of the earthquake was located along the coastal area of the Bengkulu Province. A seismic ground response study was then performed with reference to the event. Several site investigations, including standard penetration test and shear wave velocity tests, were conducted to understand the subsoil condition. The data were used to analyze a ground response during the earthquake. The amplification factor of each site was obtained, and a comparison of the spectral accelerations was performed. The results showed that …

Coax-Fed Dipole-Type Applicator For Hepatic Cancer Rf Ablation, Basari Basari, Aditya Rakhmadi, Kazuyuki Saito

Makara Journal of Technology

Cancer is the third leading cause of mortality in the world and is one of the most difficult diseases to detect and cure. This fact motivates us to investigate a treatment method by using radiofrequency (RF) ablation. RF ablation therapy kills cancer cells by electromagnetically heating them up. The treatment uses an applicator that is inserted into the body to heat the cells. The cancer cells are exposed to a temperature of more than 60 °C in short duration (a few seconds to a few minutes), thereby causing cell destruction locally. To ensure effective treatment, a minimally invasive method is …

Segmented Control Of Electrostatically Actuated Bimorph Micromirrors, Kullen W. Waggoner

Theses and Dissertations

Electrostatic actuating bimorph beams are a MEMS device that can be used to control arrays of small micromirrors for optical beam scanning. Previous research has demonstrated that creating high-angle deflection using long repeating arms of bimorph beams is possible. The current devices lack precise control and measurement of the mirror deflection. A solution to improve control and measurement is by using segmented bias channels to control separate portions of the actuation arm. The amount of mirror deflection will vary depending on which segments of the arm are actuated. This thesis discusses the results of FEA modeling and testing.

Scheduling Based On Interruption Analysis And Pso For Strictly Periodic And Preemptive Partitions In Integrated Modular Avionics, Hui Lu, Qianlin Zhou, Zongming Fei, Rongrong Zhou

Computer Science Faculty Publications

Integrated modular avionics introduces the concept of partition and has been widely used in avionics industry. Partitions share the computing resources together. Partition scheduling plays a key role in guaranteeing correct execution of partitions. In this paper, a strictly periodic and preemptive partition scheduling strategy is investigated. First, we propose a partition scheduling model that allows a partition to be interrupted by other partitions, but minimizes the number of interruptions. The model not only retains the execution reliability of the simple partition sets that can be scheduled without interruptions, but also enhances the schedulability of the complex partition sets that …

From A Locally Competitive Algorithm To Sensory Relevance Models, Walter Woods

Electrical and Computer Engineering PhD Day

This poster addresses the development of a new Machine Learning (ML) mechanism, the Sensory Relevance Model (SRM), as a means of splitting information processing tasks into two sub-tasks with more intuitive properties. Specifically, SRMs are a front-end for other ML techniques, re-mapping the input data to a similar space with significantly more sparsity, achieved through the transformation and suppression of inputs irrelevant to the task. Prior work has attempted to reveal this information for Neural Networks (NNs) either as a post-processing step via saliency maps or through a simple masking of the input achieved with a dot product (so-called ``attention'' …

Coaxial Magnetic Gearbox With A Flux Concentration Halbach Rotor And Consequent Pole Rotor Typology, Ho Yin Wong

Electrical and Computer Engineering PhD Day

This paper presents the performance comparison between a flux concentration and triple permanent magnet consequent pole magnetic gear rotor typology with the same 7.5:1 gear ratio. The triple permanent magnet consequent pole magnetic gear is unique in that it can create torque change through two field heterodyning pole combinations. The performance with respect to volumetric and mass torque density is considered. It is shown that the flux concentration typology can operate with a higher mass and volumetric higher torque density, even when using a low flux concentration ratio rotor.

Drafting In Self-Timed Circuits, Christopher Cowan

Electrical and Computer Engineering PhD Day

Intervals between data items propagating in self-timed circuits are controlled by handshake signals rather than by a clock. The sequence of handshakes can be abstracted as the movement of “tokens”. In many self-timed designs, a trailing token will catch up with a leading token, even when it trails by thousands of gate delays. Simulations in SPICE of a simple GasP circular FIFO reveal this effect. Contrary to earlier work, we find the cause of drafting to be charge stored on an isolated node between two series transistors. This mechanism occurs in many decision gates that implement a logical AND. The …

Magnetically Geared Lead Screw, Mojtaba Bahrami Kouhshahi

Electrical and Computer Engineering PhD Day

New magnetically geared lead screw (MGLS) is proposed in this work, which relies only on magnetic loading. Therefore it can provide speed and force conversion like its mechanical counterparts, but unlike the mechanical gears, a MGLS contact-less operation enables it to operate without lubrication and it can operate with low noise, and higher efficiency. Its reliance on magnetic loading also provides overload protection. MGLS combines the concepts of two previously proposed actuators named linear magnetic gear (LMG) and magnetic lead screw (MLS). However, unlike the LMG and MLS the translator on a MGLS does not contain magnets and therefore for …

Space-Angle Signal Processing Using A Modulated Scatter Array, Nasr Alkhafaji

Electrical and Computer Engineering PhD Day

A UHF signal processing technique is described in the Fourier Space-Angle domain that uses an array of scattering elements with reflection coefficients modulated at baseband. The illumination arrival angle distributes a UHF phase across the array, and the baseband modulator phase at each of the array elements determines the radiation angle of the desired scattered product. Undesired products are re-radiated in different directions. Example 1, 2 and 4 element arrays operate at 432 MHz array with 700 Hz modulation. 2 element arrays cancel one sideband, and the 4 element array cancels both the undesired sideband and 2nd order products. Reflection …

Standalone Wireless Humming Music Synthesizer (Humsynth), Anna Shabrova, Chad Carlson

Electrical Engineering

The HumSynth is a voice controlled music synthesizer. Unlike the commonly found voice modulators on the market, this product uses a vocal input in place of the traditional keyboard interface. This allows the instrument to serve as an intuitive learning tool for those not proficient in music theory. By using their voice, the consumer is able to get a feel for different scales and keys additionally bypassing the physical learning curve of learning a traditional instrument. By the date of submission this project performs basic functions in recreating the pitch input but does not meet the full specs. The enclosure …

Design Improvements And Construction Of An Electric Fish Finder, Jeffrey C. Lambert

The Pegasus Review: UCF Undergraduate Research Journal

We provide notes on the design and construction of an 'Electric Fish Finder – a self contained, portable bioamplifier for the detection and monitoring of the electric organ discharges generated by electric fish. Here we describe several improvements on a previous design, including: improved performance in waters of extremely low conductivity, extended battery life, and better waterproofing.

Employing A User-Centered Design Process For Cybersecurity Awareness In The Power Grid, Jean C. Scholtz, Lyndsey Franklin, Aditya Ashok, Katya Leblanc, Christopher Bonebrake, Eric Andersen, Michael Cassiadoro

Journal of Human Performance in Extreme Environments

In this paper, we discuss the process we are using in the design and implementation of a tool to improve the situation awareness of cyberattacks in the power grid. We provide details of the steps we have taken to date and describe the steps that still need to be accomplished. The focus of this work is to provide situation awareness of the power grid to staff from different, non-overlapping roles in an electrical transmission organization in order to facilitate an understanding of a possible occurrence of a cyberattack. Our approach follows a user-centered design process and includes determining the types …

Accurate Location Of Evolving Faults On Transmission Lines Using Sparse Wide Area Measurements, Xiangqing Jiao, Yuan Liao

Electrical and Computer Engineering Faculty Publications

In electric power systems, not all fault conditions remain unchanged during faults. An evolving fault has one characteristic initially and changes to a different condition subsequently. Locating evolving faults is challenging due to the change in fault type shortly after the fault initiation. This paper presents a new approach for estimating the locations of evolving faults on transmission lines. By using sparse wide area voltage measurements, this method is able to accurately locate evolving faults without requiring measurements from either end of the faulted line. There is no need to detect whether a fault is an evolving fault or not. …

Optimal Operation Of Integrated Microgrids, Abdullah Albaker

Electronic Theses and Dissertations

Microgrids' deployments are increasing and projected to increase even more in future due to the significant advantages that are provided by this technology for end-use customers. However, microgrids can be connected to each other to create integrated microgrids system, which can further promote the anticipated and desired benefits. An integrated operation of microgrids can potentially improve the local power system reliability and resilience, increase the individual microgrids' economic benefits, and promote further utilization of renewable energy resources. Integrating microgrids, to achieve a microgrid network or cluster, is expected be an essential application towards smarter power grids and a key operational …

A Lightweight Classification Algorithm For Human Activity Recognition In Outdoor Spaces, Graham Mccalmont, Huiru Zheng, Haiying Wang, S. I. Mcclean, Matteo Zallio, Damon Berry

Conference Papers

The aim of this paper is to discuss the development of a lightweight classification algorithm for human activity recognition in a defined setting. Current techniques to analyse data such as machine learning are often very resource intensive meaning they can only be implemented on machines or devices that have large amounts of storage or processing power. The lightweight algorithm uses Euclidean distance to measure the difference between two points and predict the class of new records.

The results of the algorithm are largely positive achieving accuracy of 100% when classifying records taken from the same sensor position and accuracy of …

Different Facial Recognition Techniques In Transform Domains, Taif Al Obaidi

Electronic Theses and Dissertations

The human face is frequently used as the biometric signal presented to a machine for identification purposes. Several challenges are encountered while designing face identification systems. The challenges are either caused by the process of capturing the face image itself, or occur while processing the face poses. Since the face image not only contains the face, this adds to the data dimensionality, and thus degrades the performance of the recognition system. Face Recognition (FR) has been a major signal processing topic of interest in the last few decades. Most common applications of the FR include, forensics, access authorization to facilities, …

Capacity Enhancement And Flexible Operation Of Unified Power Quality Conditioner In Smart And Microgrid Network, Shafiuzzaman Khan Khadem, Malabika Basu, Michael Conlon

Reports

This paper presents a new approach to design Unified Power Quality Conditioner (UPQC), termed as distributed UPQC (D-UPQC), for smart or microgrid network where capacity enhancement and flexible operation of UPQC are the important issues. This paper shows the possibility of capacity enhancement and operational flexibility of UPQC through a coordinated control of existing resources. This UPQC consists of a single unit series active power filter (APFse) and multiple shunt APF (APFsh) units in a distributed (parallel) mode. These units can be connected with a common/separate dc linked capacitor(s). The requirement of capacity enhancement arises from the flexibility to cope …

Design Of Low-Capacitance Electrostatic Discharge (Esd) Protection Devices In Advanced Silicon Technologies., Aihua Dong

Electronic Theses and Dissertations

Electrostatic discharge (ESD) related failure is a major IC reliability concern and this is particularly true as technology continues shrink to nano-metric dimensions. ESD design window research shows that ESD robustness of victim devices keep decreasing from 350nm bulk technology to 7nm FinFET technologies. In the meantime, parasitic capacitance of ESD diode with same It2 in FinFET technologies is approximately 3X compared with that in planar technologies. Thus transition from planar to FinFET technology requires more robust ESD protection however the large parasitic capacitance of ESD protection cell is problematic in high-speed interface design. To reduce the parasitic capacitance, a …

Control Of Gas Metal Arc Welding Using Process Sensing And Laser Arc Stabilization For Additive Manufacturing, Dale Brush

Graduate Theses & Non-Theses

The goal of the present research was to bridge the gap between powder-based and wire-based additive manufacturing (AM) processes using gas metal arc welding (GMAW). Powder-based AM processes typically can produce components with high geometric resolution (small features), but at low deposition rates. Wire-based AM processes typically can produce components with low geometric resolution, but at high deposition rates. AM with GMAW is a wire-based AM process in the wire arc additive manufacturing (WAAM) category of AM. To bridge the gap between powder-based and wire-based AM processes, GMAW’s deposition rate has to be reduced, allowing small features to be built. …

Parallelization And Scalability Analysis Of The \\[1pc] 3d Spatially Variant Lattice Algorithm, Henry Roger Moncada Lopez

Open Access Theses & Dissertations

The purpose of this research is to design a faster implementation of an algorithm to generate 3D spatially variant lattices (SVL) and improve its performance when it is running on a parallel computer system. The algorithm is used to synthesize a SVL for a periodic structure. The algorithm has the ability to spatially vary the unit cell, the orientation of the unit cells, lattice spacing, fill fraction, material composition, and lattice symmetry. The algorithm produces a lattice that is smooth, continuous and free of defects. The lattice spacing remains strikingly uniform even when the lattice is spatially varied. This is …

Superpixel-Based Unsupervised Hyperspectral Unmixing, Jiarui Yi

Open Access Theses & Dissertations

Recently, superpixel-based approaches have been proposed for hyperspectral unmixing. The basic assumption of this approach is that the superpixel over-segmentation segments the image into small homogeneous areas. A low-dimensional (LD) image representation is obtained by using the average of the superpixels, which are then used in other image processing tasks up the processing chain. Due to superpixel-segmentation algorithm limitations, the region inside a superpixel may not be homogeneous. Therefore, the average may not be an adequate representation for the superpixel, leading to inaccuracies in the low dimensional representation resulting in errors in the image processing tasks or analysis. Here we …

Datanet: Deep Learning Based Encrypted Network Traffic Classification In Sdn Home Gateway, Pan Wang, Feng Ye, Xuejiao Chen, And Yi Qian

Electrical and Computer Engineering Faculty Publications

A smart home network will support various smart devices and applications, e.g., home automation devices, E-health devices, regular computing devices, and so on. Most devices in a smart home access the Internet through a home gateway (HGW). In this paper, we propose a software-defined- network (SDN)-HGW framework to better manage distributed smart home networks and support the SDN controller of the core network. The SDN controller enables efficient network quality-of-service management based on real-time traffic monitoring and resource allocation of the core network. However, it cannot provide network management in distributed smart homes. Our proposed SDN-HGW extends the control to …