Biomedical Commons^™

Hardware-In-The-Loop Evaluation Of Sensor-Source Selection For Prosthetic Locomotion Intent Recognition, Victoria Asencio-Clemens

Master's Theses

Active lower-limb prostheses use intent-recognition systems to identify a user’s locomotion mode and select an appropriate control strategy, but sensor configurations that perform well offline may be unsuitable for resource-constrained embedded hardware. Existing sensor-selection methods generally prioritize classification accuracy without directly accounting for processing latency, memory usage, or other hardware-dependent requirements. To address this limitation, this thesis develops a hardware-in-the-loop source-selection framework for embedded classification of level walking, ramp ascent, ramp descent, stair ascent, and stair descent using multimodal biomechanical data from transtibial amputee participants. Subject-specific linear support vector machine classifiers were evaluated using trial-held-out validation, and candidate configurations from …

Explainable Machine Learning For Biomedical Diagnostics: Optical Imaging And Eeg Signal Analysis, Fozia Rajbdad

LSU Doctoral Dissertations

The growing convenience of complex biomedical data begins new roads for better disease detection and functional identification via artificial intelligence (AI). Nevertheless, conventional analysis methods often rely on basic metrics that drop sensitive biotic differences, and various AI systems are difficult to infer, limiting their clinical reliability and practical use. There is a growing need for explainable, physiologically relevant computational models that can extract key biomarkers from diverse biomedical data sources. This dissertation addresses this problem by obtaining explainable machine learning and deep learning procedures for studying biomedical signals and optical imaging data.

This dissertation is divided into two parts; …

The Neuropsychological Analysis Of The Effect Of Shame And Traumatic Memories In Paranoia: A Network Analysis, Anwesha Maitra

Clinical Psychology Dissertations

Paranoia is increasingly recognized as a multidimensional psychological phenomenon influenced by trauma-related distress, shame, maladaptive interpersonal experiences, and emotional functioning. Although these factors have been extensively associated with paranoia, their relationships with neurocognitive functioning, social cognition, and global functioning remain less well understood. The present study examined these relationships using traditional statistical analyses, network analysis, and machine-learning approaches in a non-clinical sample of 42 adults.

Participants completed self-report measures assessing trauma-related distress, childhood interpersonal experiences, shame, paranoia, depressive symptoms, fear of negative evaluation, self-esteem, and hostile attribution bias, in addition to a comprehensive neurocognitive battery, an emotion recognition task, and …

Practical Multimodal Wearable Sensing For Functional Upper Extremity Primitive Classification With Application To Stroke Rehabilitation, Nicholas Weiss

Master's Theses

Stroke often causes long-term weakness and impaired motor control in the upper extremity (UE), making everyday tasks such as reaching, grasping, and moving objects more difficult. Restoring functional arm use is therefore a central goal of post-stroke rehabilitation. Measuring affected arm use continuously and objectively is important because isolated clinical assessments may not fully capture how the affected arm is used during therapy or daily life. Wearable sensors offer a promising approach for monitoring, but raw sensor signals are difficult to interpret directly. Functional movement primitives address this issue by describing UE behavior as smaller, task-agnostic movement units.

This thesis …

Design And Parametric Testing Of A Transimpedance Amplifier For Low-Power Biomedical Applications, Stanlon Tan, William Chung, Brandon Wu

Electrical Engineering

This project developed and evaluated an optical sensing system for detecting changes associated with glucose concentration. The system combined a laser-diode, cuvette sample holder, photodiode, resistive-feedback transimpedance amplifier, high-resolution analog-to-digital converter, and microcontroller. Parametric testing evaluated the effects of input current and feedback resistance on transimpedance gain, output range, and linearity. Firmware was developed to configure the ADC, average repeated conversions, monitor measurement variation, convert raw digital counts into voltage using a source-meter calibration equation, and compare sample measurements with a water reference. A cuvette enclosure maintained alignment between the laser-diode, sample, and photodiode while reducing external optical interference. Testing …

Dot Product Engine Based Neuromorphic Hardware For Continuous-Time Biomedical Signal Classification, Sanjeev Srinivasan

Master's Theses

Accurate diagnosis of pathological conditions from biomedical signals, such as electrocardiograms (ECGs) is often performed offline, making it time-consuming, costly, and inefficient, especially when abnormal patterns are rare and long-term monitoring generates large amounts of data. To address this, this work proposes a compact, scalable, and programmable neuromorphic system designed for real-time preliminary arrhythmia detection and classification using ECG signals, that can be extended to other biomedical signals. The proposed design processes ECG signals using a delta modulation-based spike encoder, followed by classification with a dot-product engine (DPE) based spiking neural network (SNN) processor and winner-take-all (WTA) circuit. The architecture …

Visualization And Marker-Less Tracking Of User-Defined Pre-Processed Mri Articulator Data Using Deep Learning, Michael De George

Student Theses

This thesis presents a comprehensive framework for the automated tracking and visualization of articulatory movements based on magnetic resonance imaging (MRI) data. A well-known data analysis tool for markerless pose estimation, known as DeepLabCut, is investigated for this purpose. The performance of this tool is enhanced through the design and implementation of a pre-processor. DeepLabCut is a markerless pose estimation toolbox based on deep learning, which overcomes the issue of making manual annotations frame-by-frame. Limitations from manually marking the MRI images are addressed by implementing transfer learning with convolutional neural networks to achieve accurate, user-defined articulator tracking without markers. Current …

Familybloom: Examining Ecologies Of Collaboration In Family-Centered Health Tracking, Lucas M. Silva, Aehong Min, Evropi Stefanidi, Franceli L. Cibrian, Jesus A. Beltran, Cassie Zeiler, Sabrina E. B. Schuck, Kimberley D. Lakes, Gillian R. Hayes, Daniel A. Epstein

Engineering Faculty Articles and Research

Family health informatics tools can help support well-being with shared data tracking. Prior work typically focused on shared data review, but often in specific moments, like bedtime, or centered on caregiving of children or elderly members. To investigate how tracking can support mutual health collaboration between family members pervasively across daily contexts, we designed and deployed FamilyBloom, a glanceable smartwatch and home display system for mood and goal tracking. Twelve families with both neurotypical and ADHD members used FamilyBloom for three months on average. Our findings reveal how family-centered tracking created collaboration opportunities and tensions across multiple ecological systems: individual …

Polymer Microstructures For Advanced Biomanufacturing, Tongyao Wu

LSU Doctoral Dissertations

With the continued growth of the biopharmaceutical industry, the demand for scalable, robust, and resource-efficient platforms for large-scale mammalian cell culture is amplified. Recent developments in microfluidic technology, such as precise control of the microenvironment, showed the potential to improve the performance of cell culture systems. However, constrained by scalability and operational efficiency, applying such approaches to large-scale cell culture and biopharmaceutical production presents challenges. This dissertation addresses these challenges through three independent but conceptually related technological developments. First, a roll-to-roll (R2R) fabrication process was developed for the scalable production of hollow microcarriers (HMCs). HMCs provide three-dimensional microenvironments suitable for …

Optimized Resnet-18 Architecture For Multi-Class Oral Diseases Classification, Ahmed Ahmed

Karbala International Journal of Modern Science

In recent years, the classification of oral diseases has gained significant attention due to its influence on public health and the necessity for early and accurate diagnosis. Traditional diagnosis depends on manual clinical assessment, which can be slow and subjective. An optimized and subsequently quantized model is required to provide a faster and more consistent diagnostic support tool. This paper proposes an optimized ResNet-18 architecture for the classification of six oral diseases. The optimization process is based on removing the Rectified Linear Unit (ReLU), Batch Normalization (BN), and convolutional layers from the base ResNet-18 blocks that contain 128 filters. This …

Healthcare Digital Twins: A Methodological Literature Review On Integrating Iot And Ai For Personalized Medicine And Predictive Care, Sara Shahnazinia, Mahsa Tavasoli, Abdolhossein Sarrafzadeh, Ali Karimoddini

Electrical & Computer Engineering Faculty Publications

Digital Twin (DT) technology has the potential to revolutionize healthcare delivery and enhance patient outcomes through personalized and precision medicine, simulation models for operations and interventions, and drug discovery. However, successful implementation of DTs in Internet of Things (IoT) and artificial intelligence (AI) healthcare is contingent upon addressing key challenges such as privacy, ethics, and robust data security. This paper presents a methodological literature review of DT applications in healthcare, systematically analyzing the current state of research, key enabling technologies, and implementation challenges. The review summarizes DT categorization approaches (application-based, technology-based, and real-time function-based); delineates core DT components such as …

Beyond The Square Pulse: Waveform Shape, Eeg Correlates, And The Pursuit Of Natural Sensation In Tens, Jason Whitson

Honors Undergraduate Theses

This study investigates the relationship between electrical stimulus characteristics of shape and charge on evoked sensations and electroencephalogram (EEG) data during multi-waveform transcutaneous electrical nerve stimulation (TENS) of the median nerve. Neuromodulation methods have traditionally had little control over the location and quality of their associated evoked sensation (e.g., electric, vibration, touch). This experiment utilized five unique stimulus waveforms during TENS stimulation. EEG data were collected concurrently to provide an introductory objective measure of the neural responses underlying these sensory changes. Eleven participants completed three tasks (thresholding, super-threshold stimulation, two-alternative forced choice) using a two-electrode TENS approach. Stimulus waveforms were …

C. Difficile Detection Method For First Responder Glove Application, Alli N. Senedak

Williams Honors College, Honors Research Projects

Clostridioides Difficile (C. diff) is a Anaerobic Gram-positive bacillus that is capable of spore formation, making it difficult to control its spread and duration in clinical environments. This phenomenon can provide danger to first responders, healthcare workers, and patients. The goal of this project is to create a biosensor capable of detecting C. diff in a clinical setting that can be applied to a glove apparatus. The project will involve the use of C. diff aptamers activated on the surface of an electrode. Once surface activation has been verified via surface analysis, the electrodes will be exposed to C. diff …

Consensus And Controversies Of International Guidelines For The Diagnosis, Surveillance, And Management Of Fetal Growth Restriction: An Updated Comparison, Daniele Diane Mascio, Suneet P. Chauhan, Tullio Ghi, Asma Khalil, Juliana G. Martins, Sara Sorrenti, Tamara Stampalija, Fabrizio Zullo, Francesc Figueras

Department of Obstetrics & Gynecology Faculty Publications

OBJECTIVE: To compare areas of consensus and disagreements across contemporary international and national guidelines on the diagnosis, surveillance, and management of fetal growth restriction (FGR).

DATA SOURCES: Electronic searches of MEDLINE from database inception up to March 2026 using MeSH terms and keywords related to FGR and guidelines. STUDY ELIGIBILITY CRITERIA: Critical, structured comparison of national or international guidelines on FGR published since 2010. Final inclusion required unanimous agreement from all authors.

STUDY APPRAISAL AND SYNTHESIS METHODS: Pre-specified extraction across domains: definition; prediction/prevention; surveillance tools and frequency; delivery timing and mode; and labor induction methods. Dual data …

Design And Development Of Biomimetic Hydrogel Interfaces For Enhanced Bioelectrical Signal Acquisition, Daniela Nikoloska

UNLV Theses, Dissertations, Professional Papers, and Capstones

Every second, human skin processes over one million sensory signals while maintaining properties such as electrical conductivity, mechanical adaptability, and regenerative capability that surpass all synthetic materials. Contemporary bioelectronic devices prove inadequate when contacting skin surfaces due to poor adhesion and electrical contact issues that prevent effective sensing. Despite advancements in wearable and bioelectronic technologies, current devices face major drawbacks when interfacing with human skin, particularly in maintaining firm adhesion, conformability, and low-noise electrical signal acquisition.

This research focuses on the development of a biomimetic hydrogel-based interface for bioelectronic sensing. Specifically, a hybrid hydrogel system composed of polydopamine (PDA)- doped …

Rapid Prototyping Of Low-Cost Sensor Systems Towards A Platform For Upper Limb Posture Estimation, Russell Rathbun

Electrical Engineering and Computer Science Undergraduate Honors Theses

Physical therapy requires patients to perform repeated actions to achieve meaningful results in rehabilitation. This thesis explores production methods and various sensor systems by utilizing rapid prototyping, inertial measurement units (IMUs), and capacitive sensor arrays (CSAs). CSAs can be made from a wide ar- ray of materials and techniques including 3d printing and laser ablation–to rapidly create CSAs that can be custom fit to enable proximity, force, and touch detection. IMU and CSA systems individually are able to track upper limb movements, ges- tures, and positions. This combination of sensors enables accurate upper limb pos- ture estimation of patients. This …

Unmixing In Very High Spatial Resolution Hyperspectral Images, Ana C. Chavez Lopez

Open Access Theses & Dissertations

Hyperspectral Imaging (HSI) captures hundreds of contiguous narrow wavelength bands across the optical region of the electromagnetic spectrum collecting the spectral signature of materials in the field of view of the sensor enabling detailed analysis of each pixel's spectral signature. Satellite or airborne remote sensing systems often capture imagery with low to moderate spatial resolution (LMSR). At these resolutions, the measured spectral signature is a mixture of the signatures of the materials within a single pixel. This mixing of spectral information makes analysis and material identification difficult. Hyperspectral unmixing is an analysis technique that decomposes a pixel's spectrum into constituent …

Capacity, Allocation And Update Dynamics Of Human Memory Systems, Shaoying Wang

Electronic Theses and Dissertations

Information is encoded and stored in three types of memory: sensory memory (SM), short-term memory (STM), and long-term memory (LTM). SM has a large capacity but retains information for only a brief period. When information transfers to STM, only a limited amount can be stored. Information in STM can then be transferred to LTM, which has a much larger capacity and longer retention time. STM is often conceptualized as working memory (WM) to highlight its role in active information processing. Due to the limited capacity of STM, it is commonly believed that STM serves as the bottleneck for information processing. …

Abdominal Ultrasound Image Dataset For Organ Classification And Disease Detection, Sifat Zina Karim

Research Data

This is a dataset of Ultrasound (US) images of abdominal organs. US imaging is widely accessible and a very common diagnostic tool, as it is non-invasive and does not involve radiation risk. This dataset was curated solely for research in deep learning, with potential applications in supervised, semi-supervised, and unsupervised learning to support disease detection in resource-constrained settings.

The dataset comprises 5,468 unique images of different abdominal organs, namely: Abdominal Aorta (0), Gallbladder (1), Hepatic Vein (2), Kidneys (3), Liver (4), Ovaries (5), Pancreas (6), Portal Vein (7), Spleen (8), and the Urinary System (9), which includes the Urinary Bladder, …

Non-Invasive Way For Detection Of Neonatal Jaundice Using Gbr, Priti V. Bhagat, Mukesh Raghuwanshi, Ashutosh D. Bagde

Chulalongkorn Medical Journal

Background: Neonatal jaundice is a common condition in newborns due to excess levels of bilirubin. The traditional method for bilirubin testing is invasive, i.e., through blood tests only, which is painful to infants. Therefore, this study uses machine learning algorithms to develop a non-invasive way to detect neonatal jaundice.

Objectives: Design a computer-aided support system to detect neonatal jaundice using machine learning algorithm.

Methods: The gradient-boosting regression model is used to predict the bilirubin level. Gradient Boosting is a robust boosting algorithm that combines several weak learners into strong learners, in which each new model is trained to minimize the …

Predicting The Response Of Tendon-Driven Prosthetic Finger With Hyperelastic Joints, Lucas Gallup, Mohamed Trabia, Brendan O'Toole

Mechanical Engineering Faculty Research

Properly designed prosthetics hands can enhance the quality of life for those suffering from limb loss. Recently, 3D-printed prosthetic hands are becoming common. In these prostheses, fingers flex through the tendons that are activated by motion of the wrist. To provide spring action, thermoplastic polyurethane (TPU) hyperelastic joints are used to connect digits to each other as well as to the wrist. While these designs are common, no model for the relationship between tendon tension and joint flexion is available. This work has developed a quasi-static virtual work-based model to predict the relationship between tendon forces and the flexion of …

Continuous Versus Discrete-Time Sigma-Delta Analog To Digital Converters For Biomedical Applications: A Comparison, Haya H. Binsalim, Batool Alaidroos, Basma Shigdar, Salma Badaam, Aziza I. Hussein

Effat Undergraduate Research Journal

Continuous-time (CT) and discrete-time (DT) sigma-delta (ΔΣ) converters are two commonly used techniques for analog-to-digital conversion. While both methods operate based on the principles of oversampling and noise shaping, they differ in their implementation and performance characteristics. CT ΔΣ converters use analog circuits to sample and process signals continuously, while DT ΔΣ utilizes digital circuits to sample and process signals at discrete intervals. This paper presents a comprehensive comparison between CT and DT ΔΣ converters, highlighting their advantages and limitations. The comparison is made in terms of design complexity, power consumption, signal-to-noise ratio (SNR), and other essential parameters in medical …

Exploring Longitudinal Stability Of Spatiotemporal Sequential Patterns By Means Of Autoencoder Schemes For Eeg Based Personal Identification, Muhammed E. Oztemel

LSU Doctoral Dissertations

Robust personal identification remains a critical and challenging task in the digital era. Electroencephalography (EEG) offers a unique biometric modality that captures individual brain dynamics through complex neural signals. This dissertation proposes autoencoder (AE) based feature extraction and subject identification through these features. EEG recordings are first transformed into topographic maps to represent spatial brain activity. Consecutive topomaps are then concatenated to capture temporal transitions across frames. Convolutional autoencoders (CAEs) are used to learn spatial and temporal patterns, while domain-adaptive AEs are designed to model evoked potential based responses. Additionally, self-attention mechanism is incorporated to enhance feature representation. To analyze …

Functional Biopolymers Applied To Sustainable Technologies In The Environment And Healthcare, Fengjie He

UNLV Theses, Dissertations, Professional Papers, and Capstones

Biodegradable polymeric materials (biopolymers) are naturally derived materials known for their excellent biocompatibility, biodegradability, sustainability, and versatile chemical functionality. They have attracted increasing attention in various applications as alternative to synthetic materials ranging from food packaging to tissue engineering. Meanwhile, with intrinsic advantages, biopolymers have also emerged as promising materials in addressing contemporary challenges in both biomedical and environmental fields. Motivated by the significant potential of biopolymers and the growing need for sustainable materials, my research focuses on the design and engineering of biodegradable polymers with novel modification methods and application directions. In this work, two representative biopolymers are selected: …

Study Of Ai Applications In Biomedical Data Acquisition, Communication, And Analysis: Cest Mri Acceleration And Ecg Transmissions, Adarsha Bhattarai

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This dissertation investigates the application of artificial intelligence in biomedical data acquisition, communication, and analysis to advance neurological research and to enable the early detection of cardiovascular conditions. Despite significant advances in imaging and physiological modalities, challenges persist. Imaging modalities, such as the chemical exchange saturation transfer magnetic resonance imaging (CEST MRI) technique are challenged by a prolonged data acquisition time and high operational costs. In addition, physiological modalities such as electrocardiogram (ECG) sensors face constraints in providing uninterrupted signal monitoring which is crucial for the timely detection of premature cardiac abnormalities. The primary goal of this work is to …

Thermal Inkjet Bioprinting Of Human Fibroblasts Into Stem Cell Environment Leads To Stem-Like Gene And Protein Expression And Changes In Hippo Pathway Effectors Yap/Taz, Patricia Ablanedo Morales

Open Access Theses & Dissertations

Thermal inkjet bioprinting (TIB) has emerged as a powerful tool with many potential applications, such as organ regeneration, drug testing, and cell differentiation, among others. Despite the forces and stress that cells are subjected to during the printing process, there is little research that investigates in detail the combined effects of the TIB process and the surrounding environment on cells. Furthermore, a cell's biological environment greatly influences its behavior. Therefore, understanding the effects of bioprinting on cells in a particular environment at a genetic level can provide clues regarding changes in cell characteristics. Bioprinting could potentially be used as a …

Effects Of Environmental Stressors On Human Tissue-On-A-Chip Platforms, Andie Padilla

Open Access Theses & Dissertations

As space exploration begins to extend beyond low earth orbit, it has become increasingly critical to understand the interaction of the extreme environment of space flight with human systems. While it is known that space-travel induces a vast array of complications to cardiac, neural, musculoskeletal, and immune systems, the mechanisms by which these complications occur are poorly understood. Current research to study the effects of microgravity and radiation are limited to ground simulations, which rarely account for the multifactorial stressors experienced during spaceflight, or long duration studies aboard the International Space Station. Similarly, traditional two-dimensional (2D) models lack the ability …

A Deep Learning Approach For Semantic Segmentation And Its Application On Ctc., Samir Farag Harb

Electronic Theses and Dissertations

This dissertation explores the modeling and analysis of medical images, focusing on the intricate task of colon segmentation and subsequent 3D reconstruction, which are critical steps in Computed Tomography Colonography (CTC) systems. The primary objective of this research is to develop precise segmentation approaches to enhance the accuracy of colon identification and reconstruction from abdominal CT scans. Three distinct segmentation approaches are proposed and evaluated: a Markov Random Field (MRF)-based approach, a convolutional neural network (CNN)-based deep learning (DL) approach, and a sequential episodic training with dual contrastive learning Approach (G-SET-DCL) that has a flavor of few-shot learning (FSL). To …

Ac Electric Fields Manipulate And Concentrate Dna Molecules On Electrodes, Akila Wijesinghe, Dharmakeerthi Nawarathna

Graduate Student Government Association Research Conference

Point-of-care (POC) electric field-based biosensors have emerged as a promising tool to detect early cancer biomarkers such as circulating tumor DNA (ctDNA), microRNA (miRNA), and proteins. To be effective in screening in clinical settings, these biosensors must be simple and easy to use. In this study, we have studied the manipulation of short DNA molecules suspended in a sessile drop to achieve this goal. Alternative current (AC) electric fields were used to polarize DNA molecules and produce dielectrophoretic (DEP) force on DNA molecules. DEP force is used to manipulate polarized DNA molecules towards the higher electric field gradients (toward the …

A Parallel Fuzzy Logic Framework For Surgical Skill Evaluation Via Instance Segmentation And Deepsort Tracking, Mohsen M. Mohaidat

Dissertations

Manual evaluation of suturing skills during laparoscopic training is often subjective and labor-intensive, resulting in the lack of scalable and consistent feedback for trainees. This study proposes an automated framework that not only significantly reduces the need for in-person assessment by experts but also ensures scalability, thereby addressing the objectivity and cost-effectiveness limitations. While low-cost laparoscopic box trainers have become increasingly popular for residency training, performance assessment still depends on expert supervision. The proposed system aims to alleviate these limitations.

This study introduces a novel automated framework incorporating an optimized DeepSORT algorithm for classifying, localizing, and tracking surgical tools using …