Open Access. Powered by Scholars. Published by Universities.®

Process Control and Systems Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 361 - 390 of 530

Full-Text Articles in Process Control and Systems

Methodology For Determination And Assessment Of Uncertainty Sources Of Textile Materials Total Thermal Resistance, Abdurauf Abdurashidovich Abdukayumov, Ortagoli Sharipovich Hakimov Mar 2021

Methodology For Determination And Assessment Of Uncertainty Sources Of Textile Materials Total Thermal Resistance, Abdurauf Abdurashidovich Abdukayumov, Ortagoli Sharipovich Hakimov

Chemical Technology, Control and Management

The problems of improving of methods for determination of the total thermal resistance of textile materials are considered. A comparative analysis of the applied methods based on stationary and non-stationary heat exchange is performed. A higher accuracy of non-stationary methods based on measuring the cooling time of a heat cell with subsequent determination of the cooling rate and the total thermal resistance of the material under study is noted. A method is proposed for estimating the variance of the main values required for calculating the total thermal resistance of materials. The results of the study of the relationship between sources …

Go to article

Analysis Of Consistency Of Similarity Predicates To Measures Of Similarity And Advantages Of Their Application In Digital Systems For Solving Intellectual Problems, Makhmudjon Abdullaev, Nodira Batirdjanovna Alimova Mar 2021

Analysis Of Consistency Of Similarity Predicates To Measures Of Similarity And Advantages Of Their Application In Digital Systems For Solving Intellectual Problems, Makhmudjon Abdullaev, Nodira Batirdjanovna Alimova

Chemical Technology, Control and Management

The results of the analysis of the correspondence of similarity predicates to similarity measures used in various metric methods used for signal classification and the feasibility of using similarity predicates in the construction of digital systems for solving intellectual problems, for which the simplification of computational operations is of no small importance, are presented. Some general and distinctive features of the similarity predicate are considered in comparison with the euclidean metric in relation to one-dimensional and two-dimensional spaces, and generalized to the case of n-dimensional metric spaces. The expediency of using methods based on the calculation of similarity predicates, which …

Go to article

Synthesis Of Control Systems For Multidimensional Dynamic Objects Under Parametric Uncertainty Based On The Invariance Theory, U.F Mamirov Mar 2021

Synthesis Of Control Systems For Multidimensional Dynamic Objects Under Parametric Uncertainty Based On The Invariance Theory, U.F Mamirov

Chemical Technology, Control and Management

The problems of synthesis of control systems for multidimensional dynamic objects in the conditions of parametric uncertainty which are based on invariance theory are considered. When constructing stable synthesis algorithms, a recurrent method for determining pseudo-solutions of linear algebraic systems of equations is used. Computational algorithms for the solution based on singular matrix expansions are given. These computational procedures allow us to regularize the problem of synthesis of the considered algorithms for the synthesis of control systems for multidimensional dynamic objects under conditions of parametric uncertainty and improve the quality indicators of control processes.

Go to article

Development Of A New Technology For Obtaining The Substance Of The Drug Acetamizole, Sarvar Saidov, Asqar Abdurazakov, Rixsibay Karimov, Mavluda Baltabayeva Mar 2021

Development Of A New Technology For Obtaining The Substance Of The Drug Acetamizole, Sarvar Saidov, Asqar Abdurazakov, Rixsibay Karimov, Mavluda Baltabayeva

Chemical Technology, Control and Management

The main goal of this work is to obtain a preparation of acetamizole based on local raw materials by a more convenient method of acylation of 2-methoxycarbonylaminobenzimidazole with glacial acetic acid, this synthesis method is proposed for the first time. On the basis of the conducted experiments, favorable conditions for the reaction were found, the influence of the nature of the acid, the temperature, the duration of the reaction and other factors on the course of the reaction was studied, the technology was developed and implemented at the experimental production of "IHRV AN RUz". Based on experiments conducted by scientists …

Go to article

Mathematical Modeling Of The 3(Н)-Quinazolin-4-Onе Synthesis Process, Ziyadullayev Mirjalol, Karimov Rikhsibay, Abdurazakov Asqar, Parmonov Asqar Feb 2021

Mathematical Modeling Of The 3(Н)-Quinazolin-4-Onе Synthesis Process, Ziyadullayev Mirjalol, Karimov Rikhsibay, Abdurazakov Asqar, Parmonov Asqar

CHEMISTRY AND CHEMICAL ENGINEERING

The aim is to optimize the conditions for the synthesis of 3(H)-quinazolin-4-one by the method of mathematical modeling to develop a technology for producing the substance of a new domestic drug used in the treatment of farm animals from helminths. In mathematical modeling, the method of a small number of squares was used. Analytical dependences of the product yield on temperature, reaction time, and molar ratios of the starting materials were determined. A system of linear equations has been compiled. The system of linear equations was performed by the matrix method (A, B, C).The average reaction rate was determined. Based …

Go to article

Study Of The Influence Of Construction And Mode Parameters On The Hydrodynamics Of A Hollow Vortex Apparatus, Bakhronov Khoshim, Akhmatov Abdumalik, Juraev Dadakhon Feb 2021

Study Of The Influence Of Construction And Mode Parameters On The Hydrodynamics Of A Hollow Vortex Apparatus, Bakhronov Khoshim, Akhmatov Abdumalik, Juraev Dadakhon

CHEMISTRY AND CHEMICAL ENGINEERING

The research was to determine the more efficient design of the swirler from the point of view of hydrodynamics and heat and its optimal parameters. Various swirl designs were manufactured and tested. After preliminary studies conducted on a laboratory installation with a glass working apparatus, several swirlers were selected taking into account their hydraulic resistance, the structure of the swirling gas-liquid flow, and the amount of liquid entrainment by gas. The results of an experimental study of the hydrodynamics of a hollow vortex apparatus with one and two tangential and axial swirlers. Hydraulic losses in the channel and in the …

Go to article

The Concept Of Constructing Set-Theoretic Models Of Structures Of Intelligent Multi-Axis Mechatronic Robot Modules, Nazarov Khayriddin Nuritdinovich, Matyokubov Nurbek Rrustamovich, Temurbek Omonboyevich Rakhimov, Pulatov Rustambek Alisher Ugli Feb 2021

The Concept Of Constructing Set-Theoretic Models Of Structures Of Intelligent Multi-Axis Mechatronic Robot Modules, Nazarov Khayriddin Nuritdinovich, Matyokubov Nurbek Rrustamovich, Temurbek Omonboyevich Rakhimov, Pulatov Rustambek Alisher Ugli

Bulletin of TUIT: Management and Communication Technologies

The article discusses the features and areas of application of multi-axis electromagnetic mechatronic modules in modules of mechatronic and robotic systems that allow not only to increase productivity and improve the quality of manufactured products, but also by replacing heavy, monotonous and sometimes associated with a risk to human health, manual labor with a machine to release a person for creative constructive work. The generalized structure of a multi-axis mechatronic module is presented; multiple theoretical models of construction principles for the study of electromagnetic mechatronic modules of robots and robotic systems are constructed. In this case, the main attention is …

Go to article

Data-Driven Tools Guided By First-Principles For Scale Modeling, Sadegh Poozesh Jan 2021

Data-Driven Tools Guided By First-Principles For Scale Modeling, Sadegh Poozesh

Progress in Scale Modeling, an International Journal

For decades, traditional scale-modeling techniques have been relying on first-principles models (FPMs). FPMs have been used to find non-dimensional numbers (PIs) and identify normalized underlying forces and energies behind the phenomenon in focus. The two main challenges with FPM-based PIs extraction are finding the relevant PIs and proper correlations between PIs. The emergence and surge of data-driven modeling (DDM) provide a new opportunity to leverage experimental data in model development across scales/plants. In this paper, first, the two mentioned issues in PIs development will be elaborated to reveal the gap, and second, a new insight into scale modeling and similarity …

Go to article

A Geometric Description Of The Set Of Stabilizing Pid Controllers, Keqin Gu, Qian Ma, Huiqing Zhou, Mahzoon Salma, Xingzi Yang Jan 2021

A Geometric Description Of The Set Of Stabilizing Pid Controllers, Keqin Gu, Qian Ma, Huiqing Zhou, Mahzoon Salma, Xingzi Yang

SIUE Faculty Research, Scholarship, and Creative Activity

This article developed a new method to described the set of stabilizing PID control. The method is based on D-parameterization with natural description of the set. It was found that the stability crossing surface is a ruled surface that is completely determined by a curve known as discriminant. The discriminant is divided into sectors at the cusps. Corresponding to the sectors, the stability crossing surface is divided into positive and negative patches. A systematic study is conducted to identify the regions with a fixed number of right half-plane characteristic roots. The crossing directions of characteristic roots for positive patches and …

Go to article

Dynamic Modelling And Control Of Grid-Level Energy Storage Systems, Sai Pushpitha Vudata Jan 2021

Dynamic Modelling And Control Of Grid-Level Energy Storage Systems, Sai Pushpitha Vudata

Graduate Theses, Dissertations, and Problem Reports (ETD)

The focus of this work is on two energy storage technologies, namely pumped storage hydroelectricity (PHS) and secondary batteries. Under secondary battery technologies, two potential technologies for grid-scale storage, namely high-temperature sodium-sulfur (NaS) battery and vanadium redox flow battery (VRFB), are investigated. PHS is a largescale (>100 MW) technology that stores and generates energy by transporting water between two reservoirs at different elevations. The goal is to develop a detailed dynamic model of PHS and then design the controllers to follow the desired load trajectory accurately with high efficiency. The NaS battery and VRFB are advanced secondary batteries which …

Go to article

Process Modeling And Techno-Economic Analysis Of Micro- Encapsulated Carbon Sorbents (Mecs) For Co2 Capture In A Fixed Bed And Moving Bed Reactors, Goutham Kotamreddy Jan 2021

Process Modeling And Techno-Economic Analysis Of Micro- Encapsulated Carbon Sorbents (Mecs) For Co2 Capture In A Fixed Bed And Moving Bed Reactors, Goutham Kotamreddy

Graduate Theses, Dissertations, and Problem Reports (ETD)

Carbon capture, utilization, and storage (CCUS) is seen as a suite of technologies to curb the carbon dioxide emissions from the atmosphere and plays a crucial role to meet the net zero emissions target for many countries by 2050. One of the major sources for CO2 emissions is combustion of fossil fuels. Various innovative capture technologies are being explored because the state-of-the-art monoethanolamine (MEA) based carbon capture technology has drawbacks such as corrosion, energy penalty. There are several potential solvents that have lower energy penalty, but they are highly viscous or may turn into solid phase in the absorber …

Go to article

Dynamic Optimization Algorithms For Baseload Power Plant Cycling Under Variable Renewable Energy, Rebecca Hyen Hae Kim Jan 2021

Dynamic Optimization Algorithms For Baseload Power Plant Cycling Under Variable Renewable Energy, Rebecca Hyen Hae Kim

Graduate Theses, Dissertations, and Problem Reports (ETD)

The growing deployment of variable renewable energy (VRE) sources, such as wind and solar, is mainly due to the decline in the cost of renewable technologies and the increase of societal and cultural pressures. Solar and wind power generation are also known to have zero marginal costs and fuel emissions during dispatch. Thereby, the VRE from these sources should be prioritized when available. However, the rapid deployment of VRE has heightened concerns regarding the challenges in the integration between fossil-fueled and renewable energy systems. The high variability introduced by the VRE as well as the limited alignment between demand and …

Go to article

Quantifying The Impact Of Load-Following On Gas-Fired Power Plants, Yifan Wang Jan 2021

Quantifying The Impact Of Load-Following On Gas-Fired Power Plants, Yifan Wang

Graduate Theses, Dissertations, and Problem Reports (ETD)

Due to rapid penetration of renewables into the grid, natural gas combined cycle (NGCC) power plants are being forced to cycle their loads more frequently and rapidly than for which they were designed. However, the impact of load-following operation on plant efficiency and equipment health are currently poorly understood. The objective of this work is to quantify the impact of load-following on the gas-fired plants by developing high-fidelity multi-scale dynamic models. There are four main tasks in this project. First, dynamic model of an NGCC power plant has been developed. The main components of the NGCC plants are the gas …

Go to article

Multimodel Operability Framework For Design Of Modular And Intensified Energy Systems, Vitor Gazzaneo Jan 2021

Multimodel Operability Framework For Design Of Modular And Intensified Energy Systems, Vitor Gazzaneo

Graduate Theses, Dissertations, and Problem Reports (ETD)

In this dissertation, a novel operability framework is introduced for the process design of modular and intensified energy systems that are challenged by complexity and highly constrained environments. Previously developed process operability approaches are reviewed and further developed in terms of theory, application, and software infrastructure. An optimization-based multilayer operability framework is introduced for process design of nonlinear energy systems. In the first layer of this framework, a mixed-integer linear programming (MILP)-based iterative algorithm considers the minimization of footprint and achievement of process intensification targets. Then, in the second layer, an operability analysis is performed to incorporate key features of …

Go to article

Fermentability Of Concentrated Sulfuric Acid Hydrolyzates From Aspenwood And Pinewood, Kando Janga Dec 2020

Fermentability Of Concentrated Sulfuric Acid Hydrolyzates From Aspenwood And Pinewood, Kando Janga

Tanzania Journal of Engineering and Technology (TJET)

The fermentability of hydrolyzates derived from two-stage concentrated sulfuric acid hydrolysis of Trembling aspen (Populus tremula) and Scots pine (Pinus sylvestris) were investigated. Three types of hydrolyzates were produced at mild, moderate and high decrystallization severity conditions. Portions of each of the original hydrolyzates were concentrated by vacuum evaporation to increase the sugar fraction to simulate industrial applications. Both sets of hydrolyzates were fermented anaerobically using Saccharomyces cerevisiae ATCC 96581. After 23 hours of fermentation, complete glucose consumption was observed for all the original hydrolyzates, with no signs of inhibition. The ethanol yields from these hydrolyzates ranged from 68% to …

Go to article

Machine Learning Based Applications For Data Visualization, Modeling, Control, And Optimization For Chemical And Biological Systems, Yan Ma Dec 2020

Machine Learning Based Applications For Data Visualization, Modeling, Control, And Optimization For Chemical And Biological Systems, Yan Ma

LSU Doctoral Dissertations

This dissertation report covers Yan Ma’s Ph.D. research with applicational studies of machine learning in manufacturing and biological systems. The research work mainly focuses on reaction modeling, optimization, and control using a deep learning-based approaches, and the work mainly concentrates on deep reinforcement learning (DRL). Yan Ma’s research also involves with data mining with bioinformatics. Large-scale data obtained in RNA-seq is analyzed using non-linear dimensionality reduction with Principal Component Analysis (PCA), t-Distributed Stochastic Neighbor Embedding (t-SNE), and Uniform Manifold Approximation and Projection (UMAP), followed by clustering analysis using k-Means and Hierarchical Density-Based Spatial Clustering with Noise (HDBSCAN). This report focuses …

Go to article

Pressure-Compensated Temperature Control In Rectification Column, Norkobilov Adham, Turakulov Zafar, Kamolov Azizbek, Talipov Hojiakbar Oct 2020

Pressure-Compensated Temperature Control In Rectification Column, Norkobilov Adham, Turakulov Zafar, Kamolov Azizbek, Talipov Hojiakbar

CHEMISTRY AND CHEMICAL ENGINEERING

The focus of this work is to study the control of a rectification column (RC) for separating n-butane (nC4) and n-pentane (nC5) mixtures. Two control structures based on conventional temperature control (TC) and pressure-compensated control (PTC) structures are studied and compared using Aspentech software. The control performance of TC and PTC are investigated in terms of the control of component purities in both distillate and bottoms streams, under various disturbances in feed and pressure conditions. Due to pressure compensation, PTC is superior to TC in terms of purity and impurity control under disturbances in feed and pressure conditions. Accordingly, simulation …

Go to article

Integrated Cyberattack Detection And Resilient Control Strategies Using Lyapunov-Based Economic Model Predictive Control, Henrique Oyama, Helen Durand Oct 2020

Integrated Cyberattack Detection And Resilient Control Strategies Using Lyapunov-Based Economic Model Predictive Control, Henrique Oyama, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

The use of an integrated system framework, characterized by numerous cyber/physical components (sensor measurements, signals to actuators) connected through wired/wireless networks, has not only increased the ability to control industrial systems, but also the vulnerabilities to cyberattacks. State measurement cyberattacks could pose threats to process control systems since feedback control may be lost if the attack policy is not thwarted. Motivated by this, we propose three detection concepts based on Lyapunov‐based economic model predictive control (LEMPC) for nonlinear systems. The first approach utilizes randomized modifications to an LEMPC formulation online to potentially detect cyberattacks. The second method detects attacks when …

Go to article

Process Improvement And Microbial Characterisation Of Biological Nitrogen Removal For Tropical Wastewater With Low Chemical Oxygen Demand/Nitrogen Ratio, How Seow Wah Sep 2020

Process Improvement And Microbial Characterisation Of Biological Nitrogen Removal For Tropical Wastewater With Low Chemical Oxygen Demand/Nitrogen Ratio, How Seow Wah

Student Works (2020-2029)

Malaysia has one of the most established biological nitrogen removal in wastewater treatment plants (WWTPs) among the developing Southeast Asian countries. The current WWTPs’ design and operating guidelines in Malaysia are mainly derived from other developed countries with more experiences in operating biological nitrogen removal. These design guidelines are good practices for WWTPs in the temperate climate region, but may not be optimal for the local wastewater characteristics and tropical climate in Malaysia. The local wastewater industry is keen to improve the design and operation of WWTPs to reduce the energy consumption and operating cost, which helps to foster a …

Go to article

Conceptual Basis For Modeling Multi-Cordinate Mechatronic Robot Modules, Yusupbekov Azizbek Nodirbekovich, Nazarov Khayriddin Nuritdinovich, Matyokubov Nurbek Rustamovich, Temurbek Omonboyevich Rakhimov Aug 2020

Conceptual Basis For Modeling Multi-Cordinate Mechatronic Robot Modules, Yusupbekov Azizbek Nodirbekovich, Nazarov Khayriddin Nuritdinovich, Matyokubov Nurbek Rustamovich, Temurbek Omonboyevich Rakhimov

Chemical Technology, Control and Management

The conceptual foundations of modeling multi-coordinate mechatronic modules of robots are considered. The use of a multi-coordinate mechatronic movement module in robots made it possible to obtain at the output of one module several linear and angular coordinates, which reduces the weight and dimensions of the robot and thereby improves its dynamic characteristics. The proposed original concept of the mathematical description of a multi-coordinate mechatronic module, which is focused on displaying their structural and operating features. A structural diagram of a developed industrial robot operating in a Cartesian coordinate system and built on the basis of a multi-coordinate mechatronic module …

Go to article

Identification Of Transition Matrix Of Controlled Objects Under Parametric Uncertainty Condition, Uktam Farkhodovich Mamirov Aug 2020

Identification Of Transition Matrix Of Controlled Objects Under Parametric Uncertainty Condition, Uktam Farkhodovich Mamirov

Chemical Technology, Control and Management

The questions of formation and construction of algorithms for identification of elements of the transition matrix of controlled objects in conditions of parametric uncertainty are considered. To identify elements of the transition matrix, we suggest using a custom model based on the type of Kalman filtration equations. Algorithms for stable calculation of a pseudo-inverse matrix using matrix decomposition are analyzed. Regular algorithms for solving argumentative problems of minimization of the identification quality criterion are given. These algorithms allow us to regularize the problem of adaptive identification of the transition matrix of an object based on regular methods for minimizing functionals …

Go to article

Detection Method For “Denial Of Service” Attacks On Web Applications, Azizbek Ravshonbek Ugli Ibrohimov Aug 2020

Detection Method For “Denial Of Service” Attacks On Web Applications, Azizbek Ravshonbek Ugli Ibrohimov

Chemical Technology, Control and Management

A method for detecting denial-of-service attacks on web applications based on the use of a multi-layer perceptron is considered. The main issues related to the use of the neural network are described: the process of collecting and preparing statistical data, the features of forming indicators that characterize the state of the web application, as well as the issues of training and evaluating the quality of the neural network.

Go to article

Structural – Parametric Analysis And Synthesis Of Glass Furnace Condition Observer, Utkir Uktam O‘G‘Li Kholmanov Aug 2020

Structural – Parametric Analysis And Synthesis Of Glass Furnace Condition Observer, Utkir Uktam O‘G‘Li Kholmanov

Chemical Technology, Control and Management

A modified Kalman filter of the glass cooking process is synthesized, taking into account perturbations in the form of a sequence of colored noises. The possibility of expanding this filter by noise filters to improve functioning in the presence of low-frequency disturbances is studied and a corresponding estimation scheme with additional noise filters is proposed. The results of the simulation allow us to assume that low-frequency disturbances in the glass furnace act at the input and affect the state of the control object.

Go to article

Ecg Processing And Analysis Technique Based On Neural Network Learning Vector Quantization, Talat Madievich Magrupov, Sherzod Kalandarovich Nеmatov, Yokubjon Talatovich Talatov Aug 2020

Ecg Processing And Analysis Technique Based On Neural Network Learning Vector Quantization, Talat Madievich Magrupov, Sherzod Kalandarovich Nеmatov, Yokubjon Talatovich Talatov

Chemical Technology, Control and Management

The main parameters of the electrocardiogram (ECG) were processed on the basis of the neural network apparatus. A decision support algorithm for ECG analysis using a neural network for learning vector quantization is proposed. For the study was chosen such features as the duration of QRS complex, RR interval, amplitude of R-wave and the change in the slope of ST segment and heart rate, which are five inputs to the neural network learning vector quantization. Methods of pre-processing and analysis of extraction of ECG functions based on the ECG database of a medical institution in Matlab are presented. The generalized …

Go to article

Optimal Ratio Of Primary And Secondary Clarifier Characteristics In Wastewater Treatment Plants, Makhsud Idrisovich Makhmudov, Zafarbek Esanovich Kuziev, Siroj Sobirovich Nurov, Sanjar Siroj Ugli Sidikov Aug 2020

Optimal Ratio Of Primary And Secondary Clarifier Characteristics In Wastewater Treatment Plants, Makhsud Idrisovich Makhmudov, Zafarbek Esanovich Kuziev, Siroj Sobirovich Nurov, Sanjar Siroj Ugli Sidikov

Chemical Technology, Control and Management

The issues of optimization of aerobic biological wastewater treatment processes are considered. Optimal ratios of characteristics and sizes of primary and secondary sedimentation tanks, as well as their relationship with the concentration of activated sludge by volume, are revealed. Graphical representations of the dependence of the volumes of primary, secondary and total volumes of structures on the concentration of activated sludge in cleaning processes with low and high loads are obtained. Experimental studies have shown that the concentration of activated sludge in the aeration tank and the silt index directly affect the deposition characteristics of activated sludge, in particular the …

Go to article

Static Characteristics Of Thermal Humidity Converters Of Liquid Materials In Continuous Flow, N.I. Avezova, P.R. Ismatullaev, Paraxat Matyakubova Aug 2020

Static Characteristics Of Thermal Humidity Converters Of Liquid Materials In Continuous Flow, N.I. Avezova, P.R. Ismatullaev, Paraxat Matyakubova

Chemical Technology, Control and Management

Thermal systems with distributed heat sources based on a pipeline segment with radial holes are proposed for the development of designs of thermal humidity converters for liquid materials. Across the liquid flow there are tubular arguments with cylindrical heat-sensitive elements, on the surface of which the heating element winding was wound, which significantly increased their sensitivity, speed, reliability and allowed the use of standard semiconductor heat-sensitive elements.

Go to article

A Study Of Static And Dynamic Characteristics Of Multifunctional Signal Converters, Akmal Abdumalikov Aug 2020

A Study Of Static And Dynamic Characteristics Of Multifunctional Signal Converters, Akmal Abdumalikov

Chemical Technology, Control and Management

The issues of continuity, accuracy, speed and reliability of signal conversion, which are the main problems of quality control and management of production processes, remain relevant. Research shows that in practice there are different signal variables, the study of which is highly formalized in a number of modeling tasks and basic classification studies, in particular transients in converters, its sources and elements requires a unified mathematical approach, that is, visual, highly formalized modeling and research based on it. The paper presents a graph model of multifunctional signal converters that provide microprocessor and electronic devices with signals in the form of …

Go to article

A Study Of Security Problems In Big Data And Their Solutions, Nozima Akhmedova Aug 2020

A Study Of Security Problems In Big Data And Their Solutions, Nozima Akhmedova

Chemical Technology, Control and Management

Statistical data on information security that concerns Big Data and is the most important for enterprises are provided. Based on this data, we studied problems such as the lack of big data practices and protection, the lack of techniques for protecting big data, the lack of standards for protecting big data, the lack of regulation of big data and ecosystems, security problems in Big Data, and proposed several proposals to improve the security of systems that use this technology.

Go to article

Capacity Transformer Of Coaxial And Cylindrical Form Of Humidity Meter, Erkin Uljaev, Utkirjon Murodillaevich Ubaydullaev, Shohrux Nurali O'G'Li Narzullaev Aug 2020

Capacity Transformer Of Coaxial And Cylindrical Form Of Humidity Meter, Erkin Uljaev, Utkirjon Murodillaevich Ubaydullaev, Shohrux Nurali O'G'Li Narzullaev

Chemical Technology, Control and Management

The question of development and calculation of construction of a coaxial and cylindrical form of the capacity transformer of a humidity meter is considered. As basic data, the sizes and the materials ditches allowing to measure the humidity of different volumes of bulks from 5 to 50 gr are selected. As materials of a ditch, plastic are selected, and as tanks, the magnetizing materials are selected. It is briefly cited the advantages and disadvantages of ways to measure humidity and the basic dielectric characteristics of capacitive converters. The electrical replacement scheme of the proposed capacitive converter was provided and the …

Go to article

Reliable Risk Assessment Method For Effective Organization Of Information Security At Enterprise, Fayzullajon Bakhtiyorovich Botirov Aug 2020

Reliable Risk Assessment Method For Effective Organization Of Information Security At Enterprise, Fayzullajon Bakhtiyorovich Botirov

Chemical Technology, Control and Management

The problems of the new industry 4.0 automation paradigm are considered and the latest technologies in the field of information and communication technologies that stimulate it are analyzed, including cyber-physical systems, cloud computing, the Internet of things and big data. Some methods of multidimensional, multi-faceted industrial representation and analysis of big data are proposed. The basics of big data processing using granular computing methods have been developed. Marked the emergence of the problem of creation of special cognitive tool for constructing artificial agents, understanding integrated intelligence enterprises. In the process of information protection at the enterprise, it is proposed to …

Go to article

First Prev Next Last