Process Control and Systems Commons^™

Recent Advances In Bioethanol Production From Water Hyacinth: A Critical Review, Umuamina A. Matola, Mahir Mohammed Said, Olga-Ioanna Kalantzi, Abraham K. Temu

Tanzania Journal of Engineering and Technology (TJET)

Water hyacinth (WH) is a highly invasive tropical aquatic weed with high holocellulose and low lignin content, making it a promising lignocellulosic feedstock for second-generation bioethanol production. Producing bioethanol from WH offers a sustainable approach to simultaneously managing invasive biomass and producing renewable energy. This review critically evaluates recent advancements in bioethanol production from WH by examining pretreatment, hydrolysis, and fermentation technologies reported between 2014 and 2024. A PRISMA-guided literature search was conducted using the Scopus and Web of Science databases, and fifty-nine original research articles were selected for analysis. The reviewed studies were comparatively assessed based on pretreatment strategies, …

Neural Network Technologies In The Automatical Control Systems Of Absorption Process For Pureficating Natural Gas, Abdishukurov Maqsudovich Shavkat Mr, Xuecheng Li Li Xuecheng Mr

Technical science and innovation

Analysis of methods and algorithms for synthesizing adaptive control systems for technological processes based on the neural network approach is carried out in this search. The stages of mathematical modeling of complex technological processes using neural network technology were considered. Additionally, an algorithm for solving the interpolation and extrapolation problem that arises in the training process a neural network to control system was proposed. At the final stage of this article, algorithms based on neural network technology are synthesized for the control system for the parameters of the technological process of natural gas purification by absorption

A Smart System For Detecting Anatomic And Histological Symptoms Of Diseased Agricultural Plants, Rustam Baratov, Himola Sunnatillayeva, Alimardon Mamatovich Mustafoqulov

Chemical Technology, Control and Management

This study describes a novel agricultural plant disease detecting smart system, capable of handling measured plant body parameters and images received by high resolution camera at the same time. The proposed plant disease detection method is based on evaluation of the signals received by measured and controlled plant body physical parameters like resistance, temperature and capacitance of the plant stem and image processing. An analogue plant model based on an electrical circuit with distributed parameters was developed. In addition, in the article the block diagram of the smart system for the early detection of plant diseases, the circuit diagram, its …

Life Cycle Assessment Of Renewable Hydrocarbon Fuels Produced By The New Cool Gas To Liquid (Cool Gtl) Process, Elochukwu Okoye

Dissertations, Master's Theses and Master's Reports

The Cool Gas-to-Liquid (Cool GTL) process converts biogas and captured CO₂ into renewable hydrocarbon fuels, contributing to GHG emissions reduction in transportation. This report explains a Life Cycle Assessment (LCA) study that was completed to evaluate the environmental impact of different feedstocks, hydrogen sources, and electricity inputs. The analysis considers biogas from food waste, manure, and landfill sources, as well as biogenic, fossil, and direct air capture (DAC) CO₂ feedstocks. Results show that biogas pathways provide the greatest GHG reductions, with the best case (food and manure biogas + solar hydrogen + solar electricity) achieving a net-negative GWP …

Smart Manufacturing Of Cement: From Lab-Scale Simulation And Testing To Industry-Scale Deployment., Juan David Tabares Tamayo

Electronic Theses and Dissertations

Cement kilns are controlled by experienced process operators who follow experience-based industry guidelines using data collected and fundamental knowledge. The manufacturing process, which is equipped with sensors and equipment, transfers data/information to the operators to aid standardized decision-making operations. In contrast, companies have used such data to develop and implement digital solutions for predictive control systems; in effect, FLSmidth and Rockwell Automation. However, despite the availability of automated control systems and investigation in automation for process monitoring and optimization, opportunities to radically optimize cement manufacturing are still abundant and in need of implementation. Therefore, this research developed simulation models and …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Assessment Of Spatial Variability Of Groundwater Potential Using Remote Sensing And Gis-Based-Criteria Evaluation For Dar Es Salaam, Tanzania, Augustina Alexander

Tanzania Journal of Engineering and Technology (TJET)

Groundwater is an important resource for the continuous provision of water supply in both urban and rural areas. Lack of enough knowledge about the spatial variability of groundwater potential zones (GWPZS) has a negative impact on groundwater extraction development and management and may result into over exploitation. In this study, analytic hierarchy approach (AHP)-coupled with multi criteria decision analysis (MCDA) and GIS techniques were employed to integrate hydrogeological, geological as well as topographical data to assess spatial variability of groundwater potential zones of Dar es Salaam city. Seven thematic layers such as lithology, slope, land-use, lineament, drainage, soil, and rainfall …

Assessments Of The Application Of Earned Value Management System For Construction Project Performance Measurement In Zanzibar, Juma M. Matindana

Tanzania Journal of Engineering and Technology (TJET)

Many construction projects in developing countries including in Zanzibar suffer from time and budget overruns. The Revolution Government of Zanzibar established different bodies such as Zanzibar Contractors Registration Board (ZCRB), Zanzibar Architects, Engineers and Quantity Surveyors Registration Board (ZAEQRB), Zanzibar Public Procurement and Disposal of Public Asset Authority (ZPPDA), among others with the aim of controlling the performance of project. Often scope creep, time and cost overruns are very common problems in construction projects. This study aims at addressing those problems by assessing the use of Earned Value Management (EVM) methodology in measuring construction industry performance in Zanzibar. The study …

Current And Future Trends Of Construction Project Performance Models: A Review, Method Mtana

Tanzania Journal of Engineering and Technology (TJET)

The construction industry (CI) has experienced outstanding growth and contributed to economic growth for many countries, with enormous foreign investments that require quality projects. High pressure to reduce the construction cost and time commonly put the industry at risk of lower quality and safety of the construction facilities. Like many other developing countries, Tanzania needs more stringent quality control measures in the construction sector to contribute positively to sustainable growth. This study thus reviews current and future trends in construction industry performance in Tanzania. The literature review on construction projects (CPs) performance is based on information on time overruns from …

Exploring Current And Future Research Trends On Safety Climate In Construction Projects, Kamugisha Joseph Kajumulo

Tanzania Journal of Engineering and Technology (TJET)

Clients, consultants, and contractors in the construction industry can benefit from a safety climate by obtaining knowledge of attitudes and perceptions for better safety outcomes. However, the current and future research trends for safety climate in construction projects have not yet been fully examined. In order to solve this problem, a systematic review of previous research findings using a social network approach must be conducted, and future trends for the safety climate in building projects must be identified. Sixty-three peer reviewed articles were gathered to study the literature on safety climate in construction projects. A social network approach was employed …

Wastewater Treatment Fatty Acids For Biodiesel Production, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Wastewater scum is the thick oily substance that floats on top of the primary and secondary tanks within a wastewater treatment plant. Scum has a 30% to 60% lipid content making it an excellent resource for the biodiesel industry. Also the use of scum would reduce the cost of current management practices such as landfill disposal or incineration. In this article there is an overview of lipid byproducts currently being produced at wastewater treatment plants today. This is followed by a presentation showing a full length process for turning wastewater scum into biodiesel raw material.

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Froth Flotation Performance Enhancement By Feed Cavitation And Magnetic Plastic Particle Addition, Mehmet Saracoglu

Theses and Dissertations--Mining Engineering

Froth flotation is the most commonly used process to recover and upgrade the portion of the coal preparation plant feed that has a particle size smaller than 150 microns. Problems that occur when employing froth flotation in the coal industry include i) coal surfaces that are weakly-to-moderately hydrophobic, and ii) flotation systems that are overloaded and limited by insufficient retention time.

Research was performed to evaluate techniques that could be implemented to improve flotation performance under the aforementioned scenarios. Pre-aeration of flotation feed using a cavitation system was extensively evaluated in laboratory and full-scale test programs. The benefits of adding …

Calibration Of Hdm-4 For Use In Pavement Management Systems (Pms), Nurdin Mushule

Tanzania Journal of Engineering and Technology (TJET)

One of major problems of road management in developing countries is the lack of decision making tools for preparing road maintenance programmes. This results in poor resource allocation and poor utilisation of existing assets. Pavement management systems (PMS) have been developed around the world in order to assist with the pavement management process in a co-ordinated and systematic manner. Some developed countries have derived pavement performance models that are suited to local conditions by setting up long term pavement performance studies. Conversely, most developing countries do not have the resources required to set up similar large-scale field experiments. However, validation …

The Multivariate Statistical Analysis Of Abiotic Parameters Of The Lake Tanganyika Sub Catchment, Hudson Nkotagu

Tanzania Journal of Engineering and Technology (TJET)

Results from multivariate statistical analysis of abiotic parameters conducted during the dry season at 20 accessible sites on 8 rivers, 2 lakes and a dam covering the Lake Tanganyika sub catchment are discussed. Standard methods were used to determine the levels of abiotic parameters from water samples. Physical parameters including DO, EC, Eh, turbidity, temperature, pH and secchi transparency were measured in situ while chlorophyll a was determined in the laboratory. Nutrients such as NO3-, SiO2, PO4 3- and Fe2+ were determined along with HCO3-. Factor analysis resulted in four factors including increased primary productivity, redox conditions, dissolution, and reduction …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Degradation Of Waterfront Reinforced Concrete Structures At The Port Of Dar Es Salaam, I Sanga

Tanzania Journal of Engineering and Technology (TJET)

The paper summarises the results of an investigation done on piers at the Dar es Salaam Port. The problem facing these structures and marine facilities is their exposure to aggressive environmental phenomena. The paper presents an investigation of the strength and corrosion of concrete seaport piers so as to determine degradation of the reinforced concrete waterfront structures in the port of Dar es Salaam. For instance the structures at a dhow quay terminal had been in use for about 100 years. The facility was in bad condition as the concrete had been badly damaged due to corrosion. Some of the …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

Use Of Dissolved Oxygen Concentration Probes In Biological Wastewater Treatment Plants, S Manyele

Tanzania Journal of Engineering and Technology (TJET)

A study on use Of dissolved oxygen probes (DOP) for measurement Of oxygen concentration in warer and wastewater treatment is presented. The principles Of operation, design considerations and selection criteria for Two types of probes, viz. galvanic and polarographic, are discussed Use of polarographic probes in n rhree-phase fluidized bed bioreactor and in laboratory experiments is presented and discussed. The effect of airflow rate and treatment time on dissolved oxygen concentration was found to be significant. It was found that polarographic probes are important equipment in determining the pollution of the industrial effluents. Finally, the use of the DOC probes …