Process Control and Systems Commons^™

Physicochemical Properties And Chemical Compositions Of Cashew Nut Shell Liquid Extracted With Carbon Dioxide–Expanded Hexane, Neema Msuya, Joseph Yn Philip, Frank Jacob, Kando K. Janga

Tanzania Journal of Engineering and Technology (TJET)

Cashew nut shell liquid (CNSL) is a mixture of phenolic compounds that can effectively replace commercially available phenols in various applications. This study investigated the physicochemical properties and chemical composition of CNSL extracted using CO₂–expanded hexane (CXH) and compared to the traditional Soxhlet extraction method. Steamed cashew nut shells (sCNS) were used in both cases.  The CXH was carried under varying CO₂-mole fractions (0.468-0.892) and temperatures (20-36 °C) whereas Soxhlet extraction was performed at atmospheric pressure and hexane boiling point. Response Surface Methodology (RSM) with Central Composite Face-Centred Design (CCFD) was employed to evaluate the effect …

Revitalising Tanzania’S Textile Industry Through The Uk Textile System’S Role, Charles M. Kahabi

Tanzania Journal of Engineering and Technology (TJET)

Currently, there is the environmental and social challenges emerging from the global clothing and textile industry, specifically on textile waste management.  Additionally, the flow of second-hand clothing (SHC) between European countries especially the UK and Tanzania is increasing. In the UK, rapid growth of second-hand clothing (mitumba) driven by fast fashion results in vast quantities of discarded garments, of which only a fraction is recycled, leaving the remainder in landfills. Conversely, Tanzania has long depended on imported SHC a practice that, while affordable, has undermined local textile industries and contributed to waste accumulation. By examining Tanzania’s textile landscape, the research …

Fire And Explosion Hazard Risk Analysis Of Fuel Transfer Activities At Fuel Terminal “X” Utilizing The Quantitative Risk Analysis (Qra) Method, Angga Wahyu Sulistyawan, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

Fuel transfer operations at Fuel Terminal ‘X’ constitute a critical stage in the energy supply chain, where complex interactions among human, technical, and environmental factors generate inherent risks of fire and explosion. The flammable nature of fuel oil, coupled with the possibility of vapor or liquid releases outcoming by tool failures, connection leaks, or control system malfunctions, underscores the need for robust and proactive risk management strategies. This study aims to evaluate and mitigate these risks by applying Quantitative Risk Assessment (QRA). The assessment utilized the Parts Count method to foercast generic component failure rates and Fault Tree Analysis (FTA) …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Wet Gas Metering Performance Using Conventional Flow Measurement Devices, Vitali Mwinyi

Tanzania Journal of Engineering and Technology (TJET)

The demand for and production of natural wet gas from wells has significantly risen in recent years. Although natural gas liquids hold substantial value in the oil and gas market, their presence in wet gas adversely affects gas metering, leading to overreading during measurement. A comprehensive study has been undertaken to formulate and enhance correlations for rectifying overreading in wet gas metering. Nevertheless, most current correlations are designed for horizontal configurations of traditional meters. Mitigating this constraint is crucial to consider the impact of gravity on pressure loss in vertically oriented systems. This study seeks to evaluate the efficacy of …

Towards Future Sustainable Infrastructure: The Role Of Technical Audit In Tanzania’S Public Works, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to investigate the vital role and impact of technical audits in promoting sustainable infrastructure development in Tanzania. The role and effects of technical audits in long-term infrastructure development were studied using a mixed-methods approach with both quantitative and qualitative parts. Data were collected through analysis of technical audit documentation, a semi-structured questionnaire, and stakeholder interviews. The study revealed the various dimensions of infrastructure investment projects, including initiation and planning, design, procurement of contractors and consultants, contract management, environment, health, and safety. The technical audit findings reported weaknesses or non-performance issues in infrastructure planning at the national level …

Performance Dynamics Of Activated Carbon-Methanol Pair In Adsorption Refrigeration Systems, Ibrahim J. Mwasubila

Tanzania Journal of Engineering and Technology (TJET)

Adsorption refrigeration systems have shown potential for addressing the adverse effects of traditional compressor-based refrigeration systems. Adsorption refrigeration systems that utilise activated carbon and methanol demonstrate good performance, especially at temperatures below 0 °C. This combination significantly improves the cooling performance of the system, making it a dependable option for freezing applications. Despite having the potential to meet cooling demand and be eco-friendly, the adsorption refrigeration system has several drawbacks that hinder its commercialisation. This paper discusses the properties of the activated carbon methanol pair in the adsorption refrigeration system. The focus is on the desorption temperature, thermal stress, repeatability …

A Fuzzy Based Framework For Sustainable Technology Selection In Small-Scale Gold Mining Operations, John M. Kafuku

Tanzania Journal of Engineering and Technology (TJET)

Small-scale gold mining (SSGM) operations in Tanzania has been operating inefficiently due to inadequate mining processing technologies, poor working tools, lack of enough capital, and insufficient electricity. Despite the efforts made by different stakeholders in boosting the sustainability of SSGM yet the sector has not reached the expected goal. This paper proposes a framework for appropriate technology selection to help small scale gold miners in evaluating various gold mineral processing technologies. The framework utilizes the fuzzy logic set theory for technology evaluation and selection. The developed framework for technology selection upon validation provided results that technology adequacy of more than …

Effectiveness Of Natural Coagulants In Purification Of Industrial Wastewater: A Case Of Cactus Pads And Watermelon Seeds, Neema O. Msuya

Tanzania Journal of Engineering and Technology (TJET)

This study assessed the potential of cactus pads and watermelon seeds as natural coagulants in industrial wastewater treatment. The global characterization of the two coagulants was done by using the Fourier Transform Infrared (FTIR) to determine the specific functional groups and by zeta potential measurements. A full factorial design was used to design the experiment and analyze the effect of three factors: coagulant dosage, settling time and particle size with three levels each and one replicate on the turbidity removal. ANOVA analyses were used to determine the significance of the factors. Results show that the amino and hydroxyl groups in …

Investigation Of Heavy Metal Composition And Associated Health Risks From Selected Groundwater Wells In Temeke, Dar-Es-Salaam, Justin M. Jeremiah

Tanzania Journal of Engineering and Technology (TJET)

Water quality continues to be the challenge to residents in Dar es Salaam due to various anthropogenic activities in the city. This study was conducted to assess groundwater quality by determining concentrations of heavy metals. Both probability and Nonprobability sampling techniques were used to collect samples from 40 groundwater wells in 24 wards of Temeke municipal and analysed using Microwave Plasma Atomic Emission Spectrometer (Agilent 4210 MP-AES) at the Geochemistry Laboratory of the University of Dar es Salaam. Results indicated varying heavy metal concentrations ranging from 0.71 ± 0.08 to 6.64 ± 0.21 mg/l for As, 0.02 ± 0.01 to …

Development And Testing Of Small-Scale Flash Dryer For Maize Bran, Eden Ngowi

Tanzania Journal of Engineering and Technology (TJET)

Sun drying is the most common technique used to dry various food products due to its economic convenience. However, it is not effective owing to its unreliable nature leading to microbial deterioration and aflatoxin contamination of food. In Tanzania, about 1.3 million tonnes of maize bran are at risk of deterioration annually due to improper drying. The aim of this study was to design, fabricate and test an efficient small-scale flash dryer for maize bran. Using principles of material and energy balance, a small-scale flash dryer with a throughput of 500 kg of dry product per hour was designed resulting …

Analysis Of The Factors Affecting The Oil Recovery From Oilseeds In A Multistage Crosscurrent Leaching Process, Samuel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

The analysis of the total oil recovery from oilseeds in a multi-stage crosscurrent leaching process is presented. The model created using mass balance equations for three stages was used to analyze the factors affecting total oil recovery, To. The key performance factors (raw meal feed flow rate, solvent feed flow rate in each stage, solvent distribution factor for each stage, percent oil in the raw meal (Poil), solids to solution ratio in the underflow (N), solvent to solids ratio (SSR), solvent to oil ratio (SOR) and wash ratio (WR) were varied while assessing To. While SSRi and SORi ranged from …

Study Of The Effects Of Thermal Aging Coupled With Shot-Peening Treatment Of Carbonitrided Din 1.6587 Low Alloy Steel On Retained Austenite And Residual Stresses, Richard J. Katemi

Tanzania Journal of Engineering and Technology (TJET)

This work investigated the effects of thermal aging and shot-peening of carbonitrided 1.6587 steel grade on retained austenite and residual stresses. After carbonitriding samples contained maximum of 0.87% carbon, 0.34% nitrogen and 50 mass. -% retained austenite. Thermal aging conditions investigated were -30°C, 90°C and 150°C while the aging period were 14, 96 and 720 hours. After thermal aging, some of the samples were subjected to shot-peening treatment using standard cut wire shots StD – G3 - 0.6 mm VDFI 8001 with intensity in the range of 0.25 to 0.30 mmA and coverage of 1.00 to 1.24 x 98%. It …

Evaluation Of Environmental Management System For Small And Medium Enterprises In Dar Es Salaam, Tanzania, Juma M. Matindana

Tanzania Journal of Engineering and Technology (TJET)

A system that manages environmental issues of Small and Medium Enterprises (SMEs) from the time of acquisition of raw materials up to disposal of the product is not well clear, especially in Tanzania. Most of the studies have been conducted in the field of environment management but few of them address the evaluation of the management of SMEs activities with respect to the environment. Although the nature of activities of SMEs has little noticeable environmental implications at the individual level but the impact is large due to diversification and labour intensity of these SMEs. SMEs employ about 20% of the …

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Quantitative Risk Assessment And Dispersion Modelling Using Aloha For Chlorine Gas Handling Facility, Kusala Uvaraja

Student Works (2020-2029)

Malay-Sino Chemical Industries Sdn Bhd (Lahat) is a chlor-alkali industry consist of Emergency Chlorine Gas Handling Facility (ECGHF) which have the tendency to affect the plant workers and nearby residential area in the event of accidental chlorine gas release. HAZOP tool with risk assessment was used to identify the hazard and quantifying the hazards in order to prioritize the recommendations at the ECGHF. Possible incident scenario was selected from the HAZOP outcome which was the chlorine gas release from the stack due to scrubbing flow failure. The consequences of the released chlorine gas to the atmosphere was simulated by using …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Participatory Evaluation And Improvement Of Cassava Processing Machines For The Eastern Zone Of Tanzania, V Silayo

Tanzania Journal of Engineering and Technology (TJET)

Cassava processing machines previously introduced in Tanzania were chippers and graters of the International Institute Of Tropical Agriculture (IITA) design. Popularization of such machmes in Tanzania required thorough participatory testing with stakeholders. When tested with farmers in Muheza and Kibaha districts average throughputs were 11-18 kg/h, 752 kg/h and 270 kg/hfor the manual chipper, engine-powered chipper and the engine-powered grater, respectively. Despite their low throughputs the manual chipper and the grater were Veo difficult to operate, and therefore demanded improvement. Improvement on these machines included modifications on the design for increased throughput, ease of operation and safety. The improved machines …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …