Process Control and Systems Commons^™

Performance Evaluation Of Udsm Network To Deliver Multimedia Elearning Contents: Case Of Coict, Mercy Mbise

Tanzania Journal of Engineering and Technology (TJET)

The use of technology in education in Sub-Saharan Africa has been reported to be hindered by many factors including inadequate Information and Communication Technology (ICT) infrastructure, low internet speed, and lack of skills to use educational technologies. This paper aim at evaluating how the available ICT infrastructure at the College of Information and Communication Technologies (CoICT) can support, with acceptable Quality of Service (QoS), the delivery of multimedia applications for eLearning services. The evaluation was performed over a network testbed implemented in a computer laboratory for wired and wireless connections. The testbed consisted of five personal computers (PCs) connected via …

Investigating The Support For Agility In Developing Government Software Systems: A Case Of Three East African Countries, Leonard Peter Binamungu

Tanzania Journal of Engineering and Technology (TJET)

Agile Software Development Methods support an iterative and incremental way of developing software systems while responding to change by prioritising various aspects at different times. This differs from traditional sequential methods like Waterfall, in which one software development stage has to be completed before starting the next stage. To produce software systems that meet the requirements of their institutions, several governments in Africa have issued standards and guidelines to be followed during the development of government software systems. Such standards and guidelines specify the specific activities and deliverables for each stage of software development. While well-intentioned, such guidelines and standards …

Development Of Directed Randomization For Discussing A Minimal Security Architecture, Henrique Oyama, Dominic Messina, Keshav Kasturi Rangan, Akkarakaran Francis Leonard, Kip Nieman, Helen Durand, Katie Tyrrell, Katrina Hinzman, Michael Williamson

Chemical Engineering and Materials Science Faculty Research Publications

Strategies for mitigating the impacts of cyberattacks on control systems using a control-oriented perspective have become of greater interest in recent years. Our group has contributed to this trend by developing several methods for detecting cyberattacks on process sensors, actuators, or both sensors and actuators simultaneously using an advanced optimization-based control strategy known as Lyapunov-based economic model predictive control (LEMPC). However, each technique comes with benefits and limitations, both with respect to one another and with respect to traditional information technology and computer science-type approaches to cybersecurity. An important question to ask, therefore, is what the goal should be of …

Cybersecurity And Dynamic Operation In Practice: Equipment Impacts And Safety Guarantees, Kip Nieman, Dominic Messina, Matthew Wegener, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Though dynamic operation of chemical processes has been extensively explored theoretically in contexts such as economic model predictive control or even considering the potential for cyberattacks on control systems creating non-standard operating policies, important practical questions remain regarding dynamic operation. In this work, we look at two of these with particular relevance to process safety: (1) evaluating dynamic operating policies with respect to process equipment fidelity and (2) evaluating procedures for determining the parameters of an advanced control law that can promote both dynamic operation as well as safety if appropriately designed. Regarding the first topic, we utilize computational fluid …

A Control Barrier Function Perspective On Lyapunov-Based Economic Model Predictive Control, Helen Durand, Aaron D. Ames

Chemical Engineering and Materials Science Faculty Research Publications

No abstract provided.

Control Implemented On Quantum Computers: Effects Of Noise, Nondeterminism, And Entanglement, Kip Nieman, Keshav Kasturi Rangan, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Quantum computing has advanced in recent years to the point that there are now some quantum computers and quantum simulators available to the public for use. In addition, quantum computing is beginning to receive attention within the process systems engineering community for directions such as machine learning and optimization. A logical next step for its evaluation within process systems engineering is for control, specifically for computing control actions to be applied to process systems. In this work, we provide some initial studies regarding the implementation of control on quantum computers, including the implementation of a single-input/single-output proportional control law on …

Actuator Cyberattack Handling Using Lyapunov-Based Economic Model Predictive Control, Keshav Kasturi Rangan, Henrique Oyama, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Cybersecurity has gained increasing interest as a consequence of the potential impacts of cyberattacks on profits and safety. While attacks can affect various components of a plant, prior work from our group has focused on the impact of cyberattacks on control components such as process sensors and actuators and the development of detection strategies for cybersecurity derived from control theory. In this work, we provide greater focus on actuator attacks; specifically, we extend a detection and control strategy previously applied for sensor attacks and based on an optimization-based control technique called Lyapunov-based economic model predictive control (LEMPC) to detect attacks …

Test Methods For Image-Based Information In Next-Generation Manufacturing, Henrique Oyama, Dominic Messina, Renee O'Neill, Samantha Cherney, Minhazur Rahman, Keshav Kasturi Rangan, Govanni Gjonaj, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Typical control designs in the process systems engineering literature have assumed that the primary sensing methodologies are traditional instruments such as thermocouples. Dig- italization is changing the landscape for manufacturing, and data-based sensing modalities (e.g., image-based sensing) are becoming of greater interest for plant control. These considerations require novel test/evaluation solutions. For example, process systems engineering researchers may wish to test image-based sensors in simulation. In this work, we provide preliminary thoughts on how image-based technologies might be evaluated via simulation for process systems.

Quantum Computing And Resilient Design Perspectives For Cybersecurity Of Feedback Systems, Keshav Kasturi Rangan, Jihan Abou Halloun, Henrique Oyama, Samantha Cherney, Ilham Azali Assoumani, Nazir Jairazbhoy, Helen Durand, Simon Ka Ng

Chemical Engineering and Materials Science Faculty Research Publications

Cybersecurity of control systems is an important issue in next-generation manufac- turing that can impact both operational objectives (safety and performance) as well as process designs (via hazard analysis). Cyberattacks differ from faults in that they can be coordinated efforts to exploit system vulnerabilities to create otherwise unlikely hazard scenarios. Because coordination and targeted process manipulation can be characteristics of attacks, some of the tactics previously analyzed in our group from a control system cybersecurity perspective have incorporated randomness to attempt to thwart attacks. The underlying assumption for the generation of this randomness has been that it can be achieved …

Challenges And Opportunities For Next-Generation Manufacturing In Space, Kip Nieman, A. F. Leonard, Katie Tyrell, Dominic Messina, Rebecca Lopez, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

With commercial space travel now a reality, the idea that people might spend time on other planets in the future seems to have greater potential. To make this possible, however, there needs to be flexible means for manufacturing in space to enable tooling or resources to be created when needed to handle unexpected situations. Next-generation manufacturing paradigms offer significant potential for the kind of flexibility that might be needed; however, they can result in increases in computation time compared to traditional control methods that could make many of the computing resources already available on earth attractive for use. Furthermore, resilience …

On-Line Process Physics Tests Via Lyapunov-Based Economic Model Predictive Control And Simulation-Based Testing Of Image-Based Process Control, Henrique Oyama, A. F. Leonard, Minhazur Rahman, Govanni Gjonaj, Michael Williamson, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Next-generation manufacturing involves increasing use of automation and data to enhance process efficiency. An important question for the chemical process industries, as new process systems (e.g., intensified processes) and new data modalities (e.g., images) are integrated with traditional plant automation concepts, will be how to best evaluate alternative strategies for data-driven modeling and synthesizing process data. Two methods which could be used to aid in this are those which aid in testing data-based techniques on-line, and those which enable various data-based techniques to be assessed in simulation. In this work, we discuss two techniques in this domain which can be …

On-Line Process Physics Tests Via Lyapunov-Based Economic Model Predictive Control And Simulation-Based Testing Of Image-Based Process Control, Henrique Oyama, Akkarakaran Francis Leonard, Minhazur Rahman, Govanni Gjonaj, Michael Williamson, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Next-generation manufacturing involves increas- ing use of automation and data to enhance process efficiency. An important question for the chemical process industries, as new process systems (e.g., intensified processes) and new data modalities (e.g., images) are integrated with traditional plant automation concepts, will be how to best evaluate alternative strategies for data-driven modeling and synthesizing process data. Two methods which could be used to aid in this are those which aid in testing data-based techniques on-line, and those which enable various data-based techniques to be assessed in simulation. In this work, we discuss two techniques in this domain which can …

Quantum Computing And Resilient Design Perspectives For Cybersecurity Of Feedback Systems, Keshav Kasturi Rangan, Jihan Abou Halloun, Henrique Oyama, Samantha Cherney, Ilham Azali Assoumani, Nazir Jairazbhoy, Helen Durand, Simon Ka Ng

Chemical Engineering and Materials Science Faculty Research Publications

Cybersecurity of control systems is an important issue in next-generation manufac- turing that can impact both operational objectives (safety and performance) as well as process designs (via hazard analysis). Cyberattacks differ from faults in that they can be coordinated efforts to exploit system vulnerabilities to create otherwise unlikely hazard scenarios. Because coordination and targeted process manipulation can be characteristics of attacks, some of the tactics previously analyzed in our group from a control system cybersecurity perspective have incorporated randomness to attempt to thwart attacks. The underlying assumption for the generation of this randomness has been that it can be achieved …

Optimization Of Styrene From Ethylbenzene Case Study, Jabria Daria Thompson

Honors Theses

The following pages detail the optimization process of styrene from ethylbenzene in the Styrene Production Plant, Unit 500. There were two parts of the assignment, each with slightly different end goals. The goal of the first part of the assignment, was to create a process that would effectively and efficiently increase the negative Net Present Value (NPV) of the production plant. Procedures taken in this process included developing a working kinetic process simulation model and optimizing this model through unit operations and heat integration, as well as developing an accurate economic model that will be used to evaluate the proposed …

Optimization And Analysis Of A Styrene Production Process, Alexis Kimpel

Honors Theses

The production of styrene from ethylbenzene in Unit 500 is designed to start up in 2024 and operate for 12 years after startup. The engineering team was tasked with designing the process, creating an economic model, and optimizing the net present value (NPV). The process was simulated in AVEVA PRO/II Simulation for the design process and to estimate the size of equipment. Parametric and topological optimization was performed subsequently on the unit operations in the process. The NPV was improved by $423M from a base case of -$919M to an optimized case of -$496M. The project is recommended to continue …

A Data-Based Framework For Monitoring And Controlling Particulate Systems, Vidhyadhar Manee

LSU Doctoral Dissertations

One of the limitations of conventional monitoring tools in crystallization is the inability to deal with high solids concentration. Image-based monitoring, in which RGB images of the solution are captured and analyzed by an object detection software, has been a promising alternative. The software used in these tools primarily depends on hand-coded heuristics to distinguish between the signal and the noise. With the recent success of supervised deep learning, a newer paradigm has emerged in which the heuristics can be learnt from labeled images. This approach is founded on the idea that it is easier to develop labels for data …

Optimizing Virus Prefiltration For Biopharmaceutical Manufacturing, Solomon Isu

Graduate Theses and Dissertations

Virus filters are single-use devices that use a size-based separation process. In virus filters, contaminating virus particles are retained while the therapeutic molecules pass through the membrane pores. Virus filters are an essential component of the overall virus clearance strategy. Sections 1 and 2 of this dissertation provide an introduction and extensive review of monoclonal antibody (mAb) process development, where virus filtration is pivotal. In section 3, prefiltration studies were performed with an industrially relevant IgG1 type mAb using adsorptive and size-exclusion-based prefilters with different mechanisms of action. This mAb has an isoelectric point range of 7.1 to 8.0 and …

Limits Of Detection Of Mycotoxins By Laminar Flow Strips: A Review, Xinyi Zhao, Hugh Byrne, Christine M. O’Connor, James Curtin, Furong Tian

Articles

Mycotoxins are secondary metabolic products of fungi. They are poisonous, carcinogenic, and mutagenic in nature and pose a serious health threat to both humans and animals, causing severe illnesses and even death. Rapid, simple and low-cost methods of detection of mycotoxins are of immense importance and in great demand in the food and beverage industry, as well as in agriculture and environmental monitoring, and, for this purpose, lateral flow immunochromatographic strips (ICSTs) have been widely used in food safety and environmental monitoring. The literature to date describing the development of ICSTs for the detection of different types of mycotoxins using …

Model-Guided Design Of Rna-Based Synthetic Circuits For The Dynamic Regulation Of Gene Expression, Jordan R. Ryan

LSU Master's Theses

A longstanding goal in synthetic biology has been to build synthetic gene circuits with the ability to harness nature’s capability of precise gene expression regulation. Advancements in RNA technology have established RNA-based regulators with distinct advantages over traditional protein-based regulators such as faster signal propagation, versatile programmability, and low cellular burden, which has created an interest in the field to construct innovative synthetic gene circuits using de novo RNA- based regulators. However, our understanding of the behavior and kinetics of RNA-RNA interactions for the construction of gene circuits is incomplete. This thesis proposes a model-guided design framework that integrates mechanistic …

Lyapunov-Based Economic Model Predictive Control For Detecting And Handling Actuator And Simultaneous Sensor/Actuator Cyberattacks On Process Control Systems, Henrique Oyama, Dominic Messina, Keshav Kasturi Rangan, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

The controllers for a cyber-physical system may be impacted by sensor measurement cyberattacks, actuator signal cyberattacks, or both types of attacks. Prior work in our group has developed a theory for handling cyberattacks on process sensors. However, sensor and actuator cyberattacks have a different character from one another. Specifically, sensor measurement attacks prevent proper inputs from being applied to the process by manipulating the measurements that the controller receives, so that the control law plays a role in the impact of a given sensor measurement cyberattack on a process. In contrast, actuator signal attacks prevent proper inputs from being applied …

Lyapunov-Based Economic Model Predictive Control For Online Model Discrimination, Henrique Oyama, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Economic model predictive control (EMPC) is a flexible control design strategy that can be modified to achieve many operating goals while also ensuring safe operation (e.g., by adding Lyapunov-based stability constraints to form Lyapunov-based EMPC, or LEMPC). Prior works have investigated LEMPC capabilities for achieving goals online beyond optimizing process economics, including aiding in model structure selection to benefit model-based control system design since the accuracy and quality of the process model are important for achieving an expected performance from such systems. This work further probes the capabilities of LEMPC to accomplish multiple objectives during process operation, including aiding in …

Microcystin-Lr Removal From Water Via Enzymatic Linearization And Ultrafiltration, Abelline Fionah, Cannon Hackett, Hazim Aljewari, Laura Brady, Faisal Alqhtani, Isabel C. Escobar, Audie K. Thompson

Chemical Engineering Faculty Publications and Presentations

Microcystin-LR (MC-LR) is a toxin produced by cyanobacteria that can bloom in freshwater supplies. This study describes a new strategy for remediation of MC-LR that combines linearization of the toxin using microcystinase A, MlrA, enzyme with rejection of linearized byproducts using membrane filtration. The MlrA enzyme was expressed in Escherichia coli (E. coli) and purified via a His-tag with 95% purity. Additionally, composite membranes made of 95% polysulfone and 5% sulfonated polyether ether ketone (SPEEK) were fabricated and used to filter a solution containing cyclic and linearized MC-LR. Tests were also performed to measure the adsorption and desorption of MC-LR …

Broadband Dielectric Spectroscopic Detection Of Ethanol: A Side-By-Side Comparison Of Zno And Hkust-1 Mofs As Sensing Media, Papa K. Amoah, Zeinab Mohammed Hassan, Pengtao Lin, Engelbert Redel, Helmut Baumgart, Yaw S. Obeng

Electrical & Computer Engineering Faculty Publications

The most common gas sensors are based on chemically induced changes in electrical resistivity and necessarily involve making imperfect electrical contacts to the sensing materials, which introduce errors into the measurements. We leverage thermal- and chemical-induced changes in microwave propagation characteristics (i.e., S-parameters) to compare ZnO and surface-anchored metal-organic-framework (HKUST-1 MOF) thin films as sensing materials for detecting ethanol vapor, a typical volatile organic compound (VOC), at low temperatures. We show that the microwave propagation technique can detect ethanol at relatively low temperatures (<100 >°C), and afford new mechanistic insights that are inaccessible with the traditional dc-resistance-based measurements. In addition, …

Design And Control Of Intensified Membrane Reactor Systems Through Module-Based Design Approach, Brent Bishop

Graduate Theses, Dissertations, and Problem Reports (ETD)

As interest in the modularization and intensification of chemical processes continues to grow, more research must be directed towards the modeling and analysis of intensified process units. Intensified process units such as membrane reactors pose unique challenges pertaining to design and operation that have not been fully addressed in the reported literature. This work aims to address the design and control challenges caused by the integration of phenomena and the loss of degrees of freedom (DOF) that occur in the intensification of modular membrane reactor units.

First, a novel first-principles approach for modeling membrane reactors is developed using the AVEVA …

Reinforcement Learning For Process Control: Applications To Energy Systems, Elijah Ballard Hedrick

Graduate Theses, Dissertations, and Problem Reports (ETD)

Reinforcement learning (RL) is a machine learning method that has recently seen significant research activity owing to its successes in the areas of robotics and gameplaying (Silver et al., 2017). However, significant challenges exist in the extension of these control methods to process control problems, where state and input signals are nearly always continuous and more stringent performance guarantees are required. The goal of this work is to explore ways that modern RL algorithms can be adapted to handle process control problems; avenues for this work include using RL with existing controllers such as model predictive control (MPC) and adapting …