Process Control and Systems Commons^™

Justification Of Permissible Discharges Of Water Users Into Water Bodies, Mariia S. Stroganova, Ivan V. Antonov, Andrey V. Epifanov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this work is developing an algorithm for ecological and technological rationing of the permissible load on water bodies using geoinformation systems. The algorithm takes into account the self-purification of aquatic ecosystems using a three-component model. Initially, the article provides an overview of methods for determining the permissible discharge masses of pollutants for developing new approaches to rationing. The algorithm of ecological and technological rationing of the load on water bodies and geoinformation systems for its implementation is proposed. The main models used to assess the ecological state of an aquatic ecosystem are considered. A three-component model of …

Study Of Kinetics Of Hydrocarbon Gas Purification With Composite Absorbents, Oybek Aripdjanov, Shavkat Nurullaev, Shodiyakhon Azimova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the work is to improve the process of natural gas purification from acidic components using a composite absorbent. To study the sorption of acidic components in the gas composition, a chromatographic analysis method was used. The kinetics and rate of corrosion of carbon steel grade st.10 when using composite absorbents MDEA +DEA + AVRP have been studied. The results of the study show that the volume of absorption increased from 0.55 mol/mol to 0.65 mol/mol, and the amount of H₂S in the purified gas decreased from 0.022 g/m³ to 0.014 g/m³. Corrosion …

Study Of Reactive Distillation Equipment For Eterification Process, Abbos Elmanov, Abdulaziz Bakhtiyorov, Adham Norkobilov, Olimjon Maksudov, Zarif Oripov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this work is to study the chemical technological processes for eterification processes, and the reactive distillation unit, which carries out the reaction and separation process in one device, was chosen as the object of research. А reаctive distillаtion system is exаmined to produce for the production of Ethyl Acetate (EtAc) viа eterificаtion of acetic acid (HAc) with ethаnol. Optimizаtion methods using sensitivity analysis аre аlso conducted. Cаlculаtion of vаpor liquid equilibrium of the mixture system is done using UNIFАC model. Heat integration from the distillate stream of the column to the acid feed stream and from bottom …

Modeling And Performance Analysis Of Solid Oxide Fuel Cell, Mariya Pecherskaya, Khakimjan Butanov, Suhrob A. Ibodullaev, Olim Ruzimuradov, Shavkat Mamatkulov

CHEMISTRY AND CHEMICAL ENGINEERING

A three-dimensional numerical model of the system configurations of various types of solid oxide fuel cells (SOFCs) is used and the effect of parameters on SOFC performance is numerically investigated using COMSOL Multiphysics. The effect of parameters such as support layer thickness, operating temperature, and electrode porosity are shown in the polarization and power curves for each model. The results of the study showed the advantages of the anode-supported SOFC compared to cathode- and electrolyte-supported SOFC.

Theoretical calculations demonstrate the highest output power density in the anode-supported SOFC at 900 ℃, and reach a value of 0.585 W cm^{-2 …}

Rotary Furnace Lining To Reduce Thermal Stress, Zamira Mukhamedbaeva, Erkin Kurbanov, Abduvali Mukhamedbaev

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to reduce the thermal stresses of the lining in the areas adjacent to the flare sintering zone of rotary kilns intended for the production of cement clinker. It is proposed to use a lining made of parallel rows of alternating chamotte and chromium-magnesite refractory products to reduce thermal stresses in the areas adjacent to the flare sintering zone by up to 20%, increase the service life of the lining by 1.1-1.2 times as a result of equalizing thermal stresses in the areas of the sintering zone. Optimization of the initial raw material mixture, in …

Computer Simulation Of Particle Velocity In A Cyclone, Askar Artikov, Botir Usmonov, Dilshod Karabaev, Anvar Ulmasbaev, Lola Akabirova

CHEMISTRY AND CHEMICAL ENGINEERING

The article sets the goal of determining and calculating the speed of accelerated movement of particles in the gas-dust flow of an air cyclone, depending on the size of the cyclone, the physical properties of the particle and the gas-dust flow. A method for constructing a computer model of the motion of a particle in a roaring gas-dust flow of a cyclone is presented. The sequence of formalization of the computer model of the process of sedimentation of particles of a gas-dust flow of a cyclone unit is based on the theoretical foundations of aerodynamics and touches on the most …

Mathematical Modeling Of The 3(Н)-Quinazolin-4-Onе Synthesis Process, Ziyadullayev Mirjalol, Karimov Rikhsibay, Abdurazakov Asqar, Parmonov Asqar

CHEMISTRY AND CHEMICAL ENGINEERING

The aim is to optimize the conditions for the synthesis of 3(H)-quinazolin-4-one by the method of mathematical modeling to develop a technology for producing the substance of a new domestic drug used in the treatment of farm animals from helminths. In mathematical modeling, the method of a small number of squares was used. Analytical dependences of the product yield on temperature, reaction time, and molar ratios of the starting materials were determined. A system of linear equations has been compiled. The system of linear equations was performed by the matrix method (A, B, C).The average reaction rate was determined. Based …

Study Of The Influence Of Construction And Mode Parameters On The Hydrodynamics Of A Hollow Vortex Apparatus, Bakhronov Khoshim, Akhmatov Abdumalik, Juraev Dadakhon

CHEMISTRY AND CHEMICAL ENGINEERING

The research was to determine the more efficient design of the swirler from the point of view of hydrodynamics and heat and its optimal parameters. Various swirl designs were manufactured and tested. After preliminary studies conducted on a laboratory installation with a glass working apparatus, several swirlers were selected taking into account their hydraulic resistance, the structure of the swirling gas-liquid flow, and the amount of liquid entrainment by gas. The results of an experimental study of the hydrodynamics of a hollow vortex apparatus with one and two tangential and axial swirlers. Hydraulic losses in the channel and in the …

Pressure-Compensated Temperature Control In Rectification Column, Norkobilov Adham, Turakulov Zafar, Kamolov Azizbek, Talipov Hojiakbar

CHEMISTRY AND CHEMICAL ENGINEERING

The focus of this work is to study the control of a rectification column (RC) for separating n-butane (nC4) and n-pentane (nC5) mixtures. Two control structures based on conventional temperature control (TC) and pressure-compensated control (PTC) structures are studied and compared using Aspentech software. The control performance of TC and PTC are investigated in terms of the control of component purities in both distillate and bottoms streams, under various disturbances in feed and pressure conditions. Due to pressure compensation, PTC is superior to TC in terms of purity and impurity control under disturbances in feed and pressure conditions. Accordingly, simulation …

Pressure-Compensated Temperature Control In Rectification Column, Norkobilov Adham, Turakulov Zafar, Kamolov Azizbek, Talipov Hojiakbar

CHEMISTRY AND CHEMICAL ENGINEERING

The focus of this work is to study the control of a rectification column (RC) for separating n-butane (nC4) and n-pentane (nC5) mixtures. Two control structures based on conventional temperature control (TC) and pressure-compensated control (PTC) structures are studied and compared using Aspentech software. The control performance of TC and PTC are investigated in terms of the control of component purities in both distillate and bottoms streams, under various disturbances in feed and pressure conditions. Due to pressure compensation, PTC is superior to TC in terms of purity and impurity control under disturbances in feed and pressure conditions. Accordingly, simulation …