Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Geological Engineering (230)
- Physical Sciences and Mathematics (181)
- Mining Engineering (120)
- Earth Sciences (111)
- Geology (106)
-
- Biochemical and Biomolecular Engineering (82)
- Mechanical Engineering (69)
- Electrical and Computer Engineering (55)
- Chemistry (46)
- Nuclear Engineering (42)
- Materials Science and Engineering (41)
- Civil and Environmental Engineering (34)
- Geophysics and Seismology (28)
- Social and Behavioral Sciences (25)
- Environmental Sciences (20)
- Thermodynamics (20)
- Complex Fluids (19)
- Materials Chemistry (19)
- Other Chemical Engineering (18)
- Oil, Gas, and Energy (17)
- Public Affairs, Public Policy and Public Administration (16)
- Energy Policy (14)
- Polymer and Organic Materials (14)
- Economics (13)
- Other Materials Science and Engineering (12)
- Environmental Policy (11)
- Transport Phenomena (11)
- Institution
-
- Missouri University of Science and Technology (612)
- Louisiana State University (181)
- Chulalongkorn University (88)
- United Arab Emirates University (54)
- West Virginia University (27)
-
- Edith Cowan University (21)
- The British University in Egypt (18)
- University of North Dakota (17)
- Montana Tech Library (16)
- University of Dayton (11)
- City University of New York (CUNY) (9)
- University of Texas at El Paso (9)
- Michigan Technological University (8)
- University of Arkansas, Fayetteville (8)
- Central Bank of Nigeria (7)
- Association of Arab Universities (5)
- Purdue University (5)
- Tashkent State Technical University (5)
- University of Malaya (5)
- American University in Cairo (4)
- New Jersey Institute of Technology (4)
- University of Louisiana at Lafayette (4)
- University of Nebraska - Lincoln (4)
- Georgia Southern University (3)
- Louisiana Tech University (3)
- Raynor Library Marquette University (3)
- The University of Akron (3)
- Universitas Indonesia (3)
- University of Kentucky (3)
- Virginia Commonwealth University (3)
- Keyword
-
- Enhanced oil recovery (30)
- Wettability (20)
- Drilling (19)
- Conformance control (17)
- EOR (17)
-
- Machine learning (14)
- Enhanced Oil Recovery (13)
- Machine Learning (13)
- Rheology (11)
- Hydraulic Fracturing (10)
- Interfacial tension (10)
- Permeability (10)
- Reservoir Simulation (10)
- Surfactant (10)
- Well control (10)
- Artificial Intelligence (9)
- Conformance Control (9)
- Foam (9)
- Hydraulic fracturing (9)
- Shale (9)
- Geomechanics (8)
- Preformed particle gel (8)
- Lost circulation (7)
- Polymer (7)
- Reservoir (7)
- Wettability alteration (7)
- Adsorption (6)
- CO2 (6)
- Carbonate reservoirs (6)
- Crude oil (6)
- Publication Year
- Publication
-
- Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works (250)
- Masters Theses (153)
- LSU Master's Theses (96)
- Doctoral Dissertations (93)
- Chulalongkorn University Theses and Dissertations (Chula ETD) (88)
-
- LSU Doctoral Dissertations (77)
- UMR-MEC Conference on Energy / UMR-DNR Conference on Energy (59)
- Theses (36)
- Graduate Theses, Dissertations, and Problem Reports (ETD) (26)
- UMR Journal -- V. H. McNutt Colloquium Series (20)
- Petroleum Engineering and Gas (14)
- Graduate Theses & Non-Theses (13)
- Research outputs 2014 to 2021 (13)
- Chemical and Materials Engineering Faculty Publications (11)
- Thesis/ Dissertation Defenses (11)
- Theses and Dissertations (10)
- Open Access Theses & Dissertations (9)
- Dissertations (8)
- Dissertations and Theses (8)
- Honors Capstones (8)
- Bullion (7)
- Graduate Theses and Dissertations (7)
- Research outputs 2022 to 2026 (7)
- Chemistry Faculty Research & Creative Works (6)
- Civil, Architectural and Environmental Engineering Faculty Research & Creative Works (6)
- Patents (6)
- Petroleum Engineering Posters and Presentations (6)
- Petroleum Engineering Student Publications (6)
- Dissertations, Master's Theses and Master's Reports (5)
- Student Works (2020-2029) (5)
- Publication Type
Articles 871 - 900 of 1173
Full-Text Articles in Petroleum Engineering
Risk Of Well Integrity Failure Due Sustained Casing Pressure, Koray Kinik
Risk Of Well Integrity Failure Due Sustained Casing Pressure, Koray Kinik
LSU Master's Theses
Sustained casing pressure (SCP) is considered a well integrity problem. The approach of this study is to look at SCP as environmental risk due hydrocarbon release. Currently, the risk is qualified by the value of surface pressure (Pcsg) that may cause failure of casing head. However, the resulting rate of gas emission to the atmosphere is not considered. Also not considered is a possibility of breaching the casing shoe due transmission of Pcsg downhole. The objective of this study is to develop methods for maximum possible air emission rates (MER) and risk of subsurface well integrity failure due SCP. Mathematical …
Experimental Investigations In Co2 Sequestration And Shale Caprock Integrity, Abiola Olukola Olabode
Experimental Investigations In Co2 Sequestration And Shale Caprock Integrity, Abiola Olukola Olabode
LSU Master's Theses
More than sixty percent (60%) of conventional hydrocarbon reservoirs which are potential CO2 repositories are sealed by tight shale caprock. The geochemical reactivity of shale caprock during CO2 diffusive transport needs to be included in the reservoir characterization of potential CO2 sequestration sites as slow reactive transport processes can either strengthen or degrade seal integrity over the long term. Several simulation results had predicted that influx-induced mineral dissolution/precipitation reactions within shale caprocks can continuously reduce micro-fracture networks, while pressure and effective-stress transformation first rapidly increase then progressively constrict them. This experimental work applied specific analytical techniques in investigating changes in …
A Review Of Offshore Blowouts And Spills To Determine Desirable Capabilities Of A Subsea Capping Stack, Louise Matilde Smith
A Review Of Offshore Blowouts And Spills To Determine Desirable Capabilities Of A Subsea Capping Stack, Louise Matilde Smith
LSU Master's Theses
The events surrounding the Deepwater Horizon disaster have changed the face of deepwater operations. In order to continue drilling in the Gulf of Mexico, the regulatory body, the Bureau of Safety and Environmental Enforcement (BSEE), has required that applications to conduct work in the Gulf of Mexico (GOM) include a plan to stop, capture, or contain any uncontrolled release of fluids. The capping and containment systems built and implemented by BP during the event are an excellent starting point for minimizing pollution from deepwater subsea blowouts, but the system has limitations. The industry recognizes these limits but is currently focused …
An Experimental And Theoretical Critique Of Flow Model Accuracy, Shannon Ray Chollett
An Experimental And Theoretical Critique Of Flow Model Accuracy, Shannon Ray Chollett
LSU Master's Theses
In today’s exploration and production environment it is required that engineers must collect and use vast amounts of data for flow model construction and calibra- tion, as well as reservoir estimation and optimization. With modern technology, the data volume can be overwhelming. It is necessary that data monitoring and calibration are highly efficient. It is also essential that physical and mathematical models can be tested in repeatable, inexpensive experiments. The experiments described in this thesis will develop and perform verification of algorithms and can generate prior geomodels, collect and process seismic refraction data, collect and process production data, and calibrate …
Simulations Of The Primary Cement Placement In Annular Geometries During Well Completion Using Computational Fluid Dynamics (Cfd), Muhammad Zulqarnain
Simulations Of The Primary Cement Placement In Annular Geometries During Well Completion Using Computational Fluid Dynamics (Cfd), Muhammad Zulqarnain
LSU Master's Theses
Effective zonal isolation during primary cementing is only possible when drilling mud in the annulus is completely displaced with cement, while the spacers aid in this process. During the displacement process the rheological properties of fluids used and the operating conditions control the motion of different fluids interfaces; desired stable interfacial displacement leads to piston like motion. Computational Fluid Dynamics (CFD) tool with the Volume-of-Fluid (VOF) has been validated against experimental and used to conduct numerical experiments in a virtual well model consisting of 50 ft vertical section of 8.765" x 12.5" annulus having initially mud and this mud is …
A Novel Biodiesel And Glycerol Carbonate Production Plant, Nghi T. Nguyen, Yaşar Demirel
A Novel Biodiesel And Glycerol Carbonate Production Plant, Nghi T. Nguyen, Yaşar Demirel
Yaşar Demirel Publications
Crude glycerol is the byproduct of biodiesel production plant and the economic value of glycerol may affect the profitability of the biodiesel production plant. As the production rate of bioglycerol increases, its market values drop considerably. Therefore, conversion of bioglycerol into value-added products can reduce the overall cost, hence, leading to a more economical biodiesel production plant. In a direct carboxylation reaction, CO2 reacts with glycerol to produce glycerol carbonate and water. This study presents a direct comparison of the economic analysis of the conventional biodiesel production plant and the possible next generation biodiesel-glycerol carbonate production plant. At the …
Strength Adjustable Preformed Particle Gels For Conformance Control, Jia Zhou
Strength Adjustable Preformed Particle Gels For Conformance Control, Jia Zhou
Doctoral Dissertations
"Reservoir heterogeneity and early water breakthrough (also known as fingering) represent two of the greatest challenges to recover crude oil efficiently. Gel treatments have been implemented as a cost-effective method to plug high permeability zones and thus improve sweep efficiency in reservoirs. However, when extensive cross-flows exist between formation layers, gel treatments become less efficient. Polymer was used in polymer flooding to increase the viscosity of the injected fluids and to correct the fingering problem. However, such treatment may be uneconomical since dramatic viscosity loss (80-90%) is caused by shearing degradation during the injection process near the wellbore.
This research …
Enhanced Heavy Oil Recovery By Alkali-Surfactant In The Pennsylvania Warner Sandstone, Rabia Mohamed Hunky
Enhanced Heavy Oil Recovery By Alkali-Surfactant In The Pennsylvania Warner Sandstone, Rabia Mohamed Hunky
Doctoral Dissertations
"In this research, a study of the non-thermal method of alkaline-surfactant (AS) flooding to enhance heavy oil recovery from the Pennsylvanian Warner sandstone reservoir in Western Missouri was conducted. This work includ [sic] testing approximately 30 commercial surfactants and using a heavy oil sample with an API of 17. It was found that a number of surfactants could create stable emulsions. The viscosity of heavy oil could be reduced from 18,518 cp to 2.5 cp at 25⁰C through emulsification of certain surfactants. One of the major findings was that the emulsion created by the commercial surfactant, Igepalʼ CO-530 was stable …
Characterization Of Foam Flow In Pipes Using Two Flow Regime Concept, Rahul Narayanrao Gajbhiye
Characterization Of Foam Flow In Pipes Using Two Flow Regime Concept, Rahul Narayanrao Gajbhiye
LSU Doctoral Dissertations
The objective of this study is to investigate the characteristics of foam flow behavior in pipes in a wide range of experimental conditions, including two pipe materials (stainless steel and nylon pipes with about 0.36 - 0.38 inch in inner diameter and 12 ft in length), three surfactant formulations (Cedepal FA-406, Stepanform-1050, and Aquet-944), and three surfactant concentrations (0.1, 0.5, and 5 wt%). The concept of “two foam-flow regimes”, consisting of high-quality regime and low-quality regime, is at the heart of interpreting the experimental data. The experimental results in horizontal pipes showed the presence of two distinct high-quality and low-quality …
Analytical Design Method For Cold Production Of Heavy Oil With Bottom Water Using Bilateral Sink Wells, Wenting Qin
Analytical Design Method For Cold Production Of Heavy Oil With Bottom Water Using Bilateral Sink Wells, Wenting Qin
LSU Doctoral Dissertations
Few heavy oil reservoirs with strong bottom water drives have been developed successfully because of severe water coning. Water coning tends to cause low ultimate recovery, low well productivity, and high water production. Although thermal and gravity-assisted methods might improve recovery in oil reservoirs, such methods are widely perceived as either economically unfavorable or technologically infeasible. This study proposes a new, cold production technique, called Bilateral Water Sink (BWS), to meet those challenges. The BWS method suppresses water cresting by producing oil and water simultaneously from separate, horizontal wells completed in the oil and water zones; the oil and water …
Evaluation Of Simultaneous Water And Gas Injection Using Co2, Shrinidhi Shetty
Evaluation Of Simultaneous Water And Gas Injection Using Co2, Shrinidhi Shetty
LSU Master's Theses
Miscible CO2 injection is the second largest contributor to global enhanced oil recovery, as it has successfully undergone extensive laboratory tests and field applications for recovering residual oil left behind after waterflooding. Prolific incremental recoveries have been obtained for some fields. Although miscible CO2 injections generally have excellent microscopic displacement efficiency they often result in poor sweep efficiency. In order to address sweep problems and maximize recoveries, other schemes of gas injection have been developed. Two such processes are water-alternating-gas (WAG) and simultaneous water-and-gas (SWAG) injection. WAG and SWAG have been successfully used to minimize poor sweep. Improved gas utilization …
Experimental Study Of The Interaction Between Surfactants And Preformed Particle Gels, Farag Awadh Muhammed
Experimental Study Of The Interaction Between Surfactants And Preformed Particle Gels, Farag Awadh Muhammed
Masters Theses
"Gel and surfactant treatment are two principle methods to reduce water production and enhance oil recovery (EOR). However, either method by itself has limitations that can be avoided by combining the two. Gel treatment can improve sweep efficiency but has little effect on micro-displacement efficiency. Surfactants are mainly used to improve displacement efficiency but have little effect on sweep efficiency. This research sought to investigate whether the combination of gel and surfactant treatments can be used to significantly enhance oil recovery while reducing water production for extremely heterogeneous mature reservoirs. A newer trend in gel treatments is preformed particle gels …
Shale Gas Rock Characterization And 3d Submicron Pore Network Reconstruction, Malek Elgmati
Shale Gas Rock Characterization And 3d Submicron Pore Network Reconstruction, Malek Elgmati
Masters Theses
"Determining shale gas petrophysical properties is the cornerstone to any reservoir-management practice. Hitherto, conventional core analyses are inadequate to attain the petrophysical properties of shale gas at submicron-scale. This study combines interdisciplinary techniques from material science, petrophysics, and geochemistry to characterize different shale gas samples from North America including Utica, Haynesville and Fayetteville shale gas plays. Submicron pore structure, clay mineralogy, wettability and organic matter maturation were investigated to evaluate the petrophysical properties of shale gas rocks and to determine the impact of organic and inorganic matters on wettability alteration for different fracturing fluids on shale gas rocks.
High pressure …
Mesh Optimization Of Finite Element Models Of Wellbore Stress Analysis, Ming-Yen Lee
Mesh Optimization Of Finite Element Models Of Wellbore Stress Analysis, Ming-Yen Lee
Masters Theses
"Numerical modeling methods such as the widely used finite element method provide an excellent opportunity to analyze the wellbore state of stress for a variety of applications such as wellbore integrity, wellbore design or hydraulic fracturing. However, numerical modeling methods introduce errors by nature and may not precisely match the analytical solution if the meshing of the numerical model is not carefully taken care of. This study presents a parametric study of the meshing parameters mesh density, element type, and model size for 2-dimensional and 3-dimensional vertical wellbore models under three different types of boundary conditions, and a guideline for …
Physical Impact Of Waterjet-Based Sediment Remediation On Benthic Organisms, Grace Harper, Andrew Curtis Elmore, Christopher Redell, Gavin Risley, Joel Gerard Burken
Physical Impact Of Waterjet-Based Sediment Remediation On Benthic Organisms, Grace Harper, Andrew Curtis Elmore, Christopher Redell, Gavin Risley, Joel Gerard Burken
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
Adding Activated Carbon to Sediments Has Been Shown to Be an Effective Means of Reducing the Bioavailability of Certain Contaminants. the Current State of the Practice is to Mechanically Mix Activated Carbon to a Target Concentration of 3 Percent at Depths of Approximately 30 Cm using a Rotovator or Similar Construction Equipment. Waterjets Have Been Used to Cut Hard Material using a Mixture of Water and an Abrasive. If Activated Carbon is Substituted for the Abrasive, Waterjets Have the Potential to Use Surface Injection as a Replacement for Mechanical Mixing during Sediment Remediation. a Perceived Benefit of Waterjet-Based Sediment Remediation …
Development Of A Waterjet System For Direct Delivery Of Granular Iron And Activated Carbon To Remediate Contaminated Aqueous Sediments, Gavin H.R. Risley, Andrew Curtis Elmore, Joel Gerard Burken, Grzegorz (Greg) Galecki
Development Of A Waterjet System For Direct Delivery Of Granular Iron And Activated Carbon To Remediate Contaminated Aqueous Sediments, Gavin H.R. Risley, Andrew Curtis Elmore, Joel Gerard Burken, Grzegorz (Greg) Galecki
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
While the Techniques and Technologies Associated with Contaminated Sediment Remediation Are Relatively Mature, There Are Several Issues Associated with These Practices that Make Them Unattractive. the Inability of Currently Used Mechanical Mixing Implements to Place Amendments in Aqueous Environments and their Intrusive Behavior toward Benthic Communities Are Just Two Examples of a Necessity for an Improved Delivery Method. Waterjets May Be a Viable Option for Placement of Particulate Remediation Amendments, Such as Activated Carbon and Granular Iron, at Depth. a Custom Waterjet Nozzle and Injection System Has Been Fabricated by the Authors to Examine This Delivery Concept. the Developed Injection …
Numerical Simulation Of Relative Permeability Modifier Effect On Oil And Water Production, Murad Mohammedahmed Abdulfarraj
Numerical Simulation Of Relative Permeability Modifier Effect On Oil And Water Production, Murad Mohammedahmed Abdulfarraj
Masters Theses
"Excess water production is one of the most prevalent operational problems that oil companies are facing. Polymers and polymer gels have been used widely to control excess water production for mature oilfields. It is well known that polymers/gels can reduce the permeability to water (Krw) much more than that to oil (Kro). This phenomenon is called disproportionate permeability reduction (DPR) and the polymers or gels that exhibit this behavior are called relative permeability modifier (RPM). When RPMs are placed in reservoir, reduced permeability to water can lead to decreased water production, and sometimes increased hydrocarbon production, therefore prolonging the useful …
Pore-Scale Lattice Boltzmann Simulations Of Inertial Flows In Realistic Porous Media: A First Principle Analysis Of The Forchheimer Relationship, Chukwudi Paul Chukwudozie
Pore-Scale Lattice Boltzmann Simulations Of Inertial Flows In Realistic Porous Media: A First Principle Analysis Of The Forchheimer Relationship, Chukwudi Paul Chukwudozie
LSU Master's Theses
With recent advances in the capabilities of high performance computing (HPC) platforms and the relatively simple representation of complex geometries of porous media, lattice Boltzmann method (LBM) has gained popularity as a means of solving fluid flow and transport problems. In this work, LBM was used to obtain flow parameters of porous media, study the behavior of these parameters at varying flow conditions and quantify the effect of roughness on the parameters by relating the volume averaged flow simulation results to Darcy and Forchheimer equations respectively. To validate the method, flow was simulated on regular and random sphere arrays in …
Modeling Effects Of Coupled Convection And Co2 Injection In Stimulating Geopressured Geothermal Reservoirs, Tatyana Plaksina
Modeling Effects Of Coupled Convection And Co2 Injection In Stimulating Geopressured Geothermal Reservoirs, Tatyana Plaksina
LSU Master's Theses
Geopressured geothermal brines are a vast geothermal resource in the US Gulf of Mexico region. In particular, geopressured sandstones near salt domes are potential sources of geothermal energy because salt diapirs with high thermal conductivities may pierce younger, cooler strata. These characteristics enhance transfer heat from older, hotter strata at the base of the diapir into shallower strata. Moreover, widespread geopressure in the Gulf region tends to preserve permeability, enhancing productivity. As an example, the Camerina A sand of South Louisiana was chosen as a geomodel for a numerical simulation study of effects of CO2 injection and coupled convection as …
Simulation Study Of Sweep Improvement In Heavy Oil Co2 Floods, Venu Gopal Rao Nagineni
Simulation Study Of Sweep Improvement In Heavy Oil Co2 Floods, Venu Gopal Rao Nagineni
LSU Master's Theses
Enhanced oil recovery by CO2 injection is a common application used for light oil reservoirs since CO2 is relatively easily miscible with light oils. CO2 flooding in heavy oil reservoirs is often uneconomic due to unfavorable mobility ratios. Reservoir heterogeneity further complicates the process as CO2 channels through high permeability layers leading to premature breakthrough. However, this can be controlled by choosing a suitable modification to the CO2 injection process enabling better sweep efficiencies, and making the process economic. The current work focuses on two such methods; water-alternating-gas injection (WAG) and profile modification by blocking gas flow in the high …
“Hydraulic Fracturing Efficiency In The Olmos Sand Formation”, Lauren N. Fogarty
“Hydraulic Fracturing Efficiency In The Olmos Sand Formation”, Lauren N. Fogarty
Honors Capstones
No abstract provided.
Petroleum Industry Linkages And Nigeria's Economic Development, Chinyere U. Nwolisa, Chinyelu N. Ugoji
Petroleum Industry Linkages And Nigeria's Economic Development, Chinyere U. Nwolisa, Chinyelu N. Ugoji
Bullion
Nigeria, Africa's most populous country and potentially its largest economy, has witnessed decades of dictatorship and misrule. Accompanying this misrule are severe economic problems of an unprecedented magnitude. This paper intends to add further clues to the solution for this national developmental puzzle. The remaining part of the paper is arranged thus: Part 2 presents an overview of the Nigerian Petroleum industry while the part 3 looks at the literature of economic development the country appears to be executing. Parl4 discusses the various linkages the Petroleum industry offers visa-vis Nigeria's exploration of their potentials. The penultimate part will offer some …
Design Of A Conditioner For Smoothing Wind Turbine Output Power, Murali Bottu, Mariesa Crow, A. Curt Elmore
Design Of A Conditioner For Smoothing Wind Turbine Output Power, Murali Bottu, Mariesa Crow, A. Curt Elmore
Electrical and Computer Engineering Faculty Research & Creative Works
As a result of wind speed intermittency, highly variable wind power output can adversely impact local loads. We propose a conditioner to smooth the variable wind power by utilizing the energy of an ultracapacitor. The conditioner is based on a single phase voltage source inverter (VSI) connected between the grid interconnection point and the ultracapacitor. The shunt VSI injects or absorbs active power from the line to smooth the wind power by utilizing the short term storage capabilities of the ultracapacitor. The ultracapacitor is connected to the DC link through a DC-DC converter, which maintains the voltage of the DC …
Recovery Of Carbon Dioxide From Flue Gases, Fahad Husain Al-Masabi
Recovery Of Carbon Dioxide From Flue Gases, Fahad Husain Al-Masabi
Theses
In this thesis, the modeling and simulation of the absorption of dilute CO2 into falling film of aqueous solutions of a sterically hindered amine, 2-anino-2-methyl-1-propanol (AMP), was carried out using COMSOL Multiphysics Version 3.3. The operating cases were divided in two groups: (1) gas turbine operating cases (CO2 3 mol %) and (II) boiler operating cases (CO2 8.5 mol %). The key operating parameters for the studied cases are CO2 partial pressure, operating temperature and amine concentration in the aqueous solution. The simulation focused on the following: (1) CO2 Loading in aqueous AMP solution; (2) …
History Of Petroleum Engineering At Montana Tech, Leo Heath, Debbie Todd
History Of Petroleum Engineering At Montana Tech, Leo Heath, Debbie Todd
Petroleum Engineering
In January, 2010, the Petroleum Engineering department at Montana Tech moved into a new building, the Natural Resources Building, to start a new chapter in the history of the program on campus. Occupying a new building is a positive event, and it coincides with a surge of student enrollment which is prompted by industry needs and world energy demand. This time of new facilities and growing student numbers leads to the question of what the future has in store for the department. It also leads to reflection about where the department has been in the past. This history is a …
Characteristics Of Co₂ Sequestration In Saline Aquifers, Fang Yang, Baojun Bai, Dazhen Tang, Shari Dunn-Norman, David J. Wronkiewicz
Characteristics Of Co₂ Sequestration In Saline Aquifers, Fang Yang, Baojun Bai, Dazhen Tang, Shari Dunn-Norman, David J. Wronkiewicz
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Storage of CO2 in saline aquifers is a viable option for reducing the amount of CO2 released to the atmosphere. This paper provides an overall review of CO2 sequestration in saline aquifers. First, the principles of CO2 sequestration are presented, including CO2 phase behavior, CO2-water-rock interaction, and CO2 trapping mechanisms. Then storage capacity and CO2 injectivity are discussed as the main determinants of the storage potential of saline aquifers. Next, a site section process is addressed considering basin characteristics, reservoir characteristics, and economic and social concerns. Three main procedures are then …
Strength Evaluation And Transportation Behavior Of Preformed Particle Gel Using Screens And Tubes, Rajesh Sarma Challa
Strength Evaluation And Transportation Behavior Of Preformed Particle Gel Using Screens And Tubes, Rajesh Sarma Challa
Masters Theses
"This research included a series of experiments, using screen models to evaluate the strength of swollen gel particles. It also includes the study of PPG propagation and extrusion behavior through tubes of various internal diameters. The effect of the particle gel swelling ratio (depending on brine concentration), flow rate; and mesh size on the gel injection pressure and injectivity were studied. The results show that gel injection pressure depends primarily on the swelling ratio and the mesh size. However, the injection pressure does not increase significantly with injection rates, behavior consistent with the real-time injection pressure and injection rate change …
The Development And Application Of A Novel Free-Damage Fracturing Fluid (Ph<2), Jin Zhang, Yan Zhang, Yongfu Wu, Xiuqing He, Xinzhu Zhang
The Development And Application Of A Novel Free-Damage Fracturing Fluid (Ph<2), Jin Zhang, Yan Zhang, Yongfu Wu, Xiuqing He, Xinzhu Zhang
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
At present, water-Based fracturing fluid systems are mainly polymer (macromolecule) and visco-elastic surfactant (micro molecule). Because of polymer properties and incomplete gelout, the damage to matrices and conductivity of artificial fractures will be inevitable. the surfactant-Based fracturing fluid system is a micro-molecule system not to damage artificial fractures. However, it is difficult to eliminate the damages from rock debris moving and clay swelling information. a novel free-damage fracturing fluid system (FDFF), a cationic surfactant derived from a long chain fatty acid, has been developed and applied in Daqing oil field. FDFF can crosslink in a wide range from a strong …
Alkyl Polyglycoside/1-Naphthol Formulations With Ultra-Low Interfacial Tensions Against N-Octane For Enhanced Oil Recovery, Stefan Iglauer, Yongfu Wu, Patrick Shuler, Yongchun Tang, William Goddard
Alkyl Polyglycoside/1-Naphthol Formulations With Ultra-Low Interfacial Tensions Against N-Octane For Enhanced Oil Recovery, Stefan Iglauer, Yongfu Wu, Patrick Shuler, Yongchun Tang, William Goddard
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
We present Alkyl polyglycoside (APG)/1-naphthol formulations which show ultra-low interfacial tensions (IFT) against n-octane. We demonstrate that 1-naphthol is very efficient as a cosolvent in terms of reducing IFT. These formulations are therefore potentially suitable as agents for enhanced oil recovery (EOR). an increasing APG concentration strongly increased viscosity, and the formulations showed shear-thinning behavior. in a core flood EOR test we showed that this type of formulation significantly increased oil production. © 2010, European Association of Geoscientists and Engineers.
Characterization Of Rock/Fluids Interactions At Reservoir Conditions, Dayanand Saini
Characterization Of Rock/Fluids Interactions At Reservoir Conditions, Dayanand Saini
LSU Doctoral Dissertations
In this study, interfacial phenomena of spreading, wettability, and rock/oil adhesion interactions in complex rock/oil/water systems were characterized at reservoir conditions of elevated pressures and temperatures. Capabilities of both ambient and reservoir condition optical cells were used for measuring the oil/water interfacial tension and dynamic (the water-receding and the water-advancing) contact angles for various complex rock/oil/water systems. Well known sessile oil drop volume alteration method was successfully used in this study for evaluating the applicability of the modified Young’s equation for characterizing the line tension in complex rock/oil/water systems at reservoir conditions. This appears to be first time when rock/fluids …