Petroleum Engineering Commons^™

Mobility Of Nano-Particles In Rock Based Micro-Models, Jagannath Upadhyay

LSU Doctoral Dissertations

A confocal micro-particle image velocimetry (C-μPIV) technique along with associated post-processing algorithms is detailed for obtaining three dimensional distributions of nano-particle velocity and concentrations at select locations of the 2.5D (pseudo 3D) Poly(methyl methacrylate) (PMMA) and ceramic micro-model. The designed and fabricated 2.5D micro-model incorporates microchannel networks with 3D wall structures with one at observation wall which resembles fourteen morphological and flow parameters to those of fully 3D actual reservoir rock (Boise Sandstone) at resolutions of 5 and 10 μm in depth and 5 and 25 μm on plane. In addition, an in-situ, non-destructive method for measuring the geometry of …

Thermogenic Gas Hydrate Formation In Gulf Of Mexico Offshore Environment- Results From Numerical Simulation, Sulav Dhakal

LSU Master's Theses

Development of civilization and the resulting quest for energy have led us to previously uncharted territory in exploration and production of fuel. As the demand continues to grow and conventional oil reserves become depleted, we are looking into unconventional resources such as gas hydrates. However, due to the volatile nature of the energy market and production technology yet to perfected, we are not able to fully utilize the potential of gas hydrates yet.

Reservoir characterization of hydrates have so far been limited to seismic mapping, well log interpretation and laboratory scale studies. This research uses numerical simulation to understand the …

Integrated Stratigraphic Controls For Flow Simulation Of The Wall Creek Member Of Frontier Formation: Western Powder River Basin, Wyoming, Tuan Le

Graduate Theses & Non-Theses

The Frontier Formation in the Powder River Basin has been re-discovered for oil and gas potential with the development of long horizontal wells and multi-stage hydraulic fracturing. Over the last decade, the Upper Cretaceous Wall Creek Member (WCM) of the Frontier Formation has proven to be a successful hydrocarbon-producing target, yet a full understanding of the flow behavior in this complex stratigraphic unit has not been fully achieved.

The fluid and rock properties have uncertainty and are not well defined due to the low permeability rocks. This study aims to describe the fluid flow behaviors of these features and create …

Simulating Fluid Flow And Gas Expansion In The Marine Riser Using Computational Fluid Dynamics (Cfd) Software, Ross Teichman

Honors Capstones

No abstract provided.

Pore-Scale Analysis Of Interfacial Instabilities And Impact Of Heterogeneity On Relative Permeability By Lattice Boltzmann Method, Zhipeng Zhu

LSU Master's Theses

Interfacial instabilities occur often during immiscible fluid flow through porous media and their understanding is essential for waterflooding operations or other oil recovery processes. Although many studies including experimental and numerical have been done to reproduce and analyze the interfacial instabilities in porous median, there is still significant knowledge gap in fundamental understanding of these flow instabilities at the pore-scale. In order to better understand the interfacial instabilities phenomenon, the pore-scale simulations are performed. In this study, Lattice Boltzmann Method is used to simulate two different types of interfacial instabilities: viscous fingering and capillary fingering in irregular sphere packs by …

Magnetic Gradient Drilling, Garrett Lowry Nielsen

LSU Master's Theses

The drilling industry has always had difficulties with staying within the mud weight window. The problems associated with failure to stay within the mud weight window include uncontrolled influxes and wellbore collapse on the low pressure side of the window, and fluid losses and wellbore damage on the high pressure side of the window. When the risk for getting outside of this mud window becomes too great, casing must be set in order to isolate formations from each other. If too many strings of casing are set, or if the damage from getting out of the mud weight window is …

Effect Of Pipe Rotation On Casing Pressure Within Mpd Applications, Zahrah Ahmed Al Marhoon

LSU Master's Theses

Well control is one of the most crucial sectors in drilling engineering. Human lives and safety depend on the correct execution of the engineering design. Managed Pressure Drilling (MPD) is a new technology that has recently emerged in the oil and gas industry. It has special well control abilities supported by the RCD to continue drilling or carry operations that involve pipe rotation, while circulating out a gas kick. This thesis examines the effect of pipe rotation on casing pressure profiles within MPD kick circulation application. The analysis was carried on real scale kick experiments. These experiments were carried in …

Optimization Of A New Array Noise Tool; Analysis & Interpretation Of Case Studies Of Down- Hole Leak Detection, Moustafa Mahmoud Hassan Ismail

Theses

This thesis is concerned with the optimization and analysis of new array noise tools. Various lab and field case studies are analyzed to test the capabilities and determine the optimum operating conditions of the new tool for leak detection purposes. The purpose of this study is to optimize the logging procedure of real-time array noise tool, selecting adequate gain parameters and frequency band in the processing phase, and to analyze the data acquired through multiple labs and field tests. The study methodology involved the following steps:

1. Performing lab and field tests for the tool in a range of different …

Image-Based Modeling Of Flow Through Porous Media: Development Of Multiscale Techniques For The Pore Level, Timothy Wayne Thibodeaux

LSU Doctoral Dissertations

Increasingly, imaging technology allows porous media problems to be modeled at microscopic and sub-microscopic levels with finer resolution. However, the physical domain size required to be representative of the media prohibits comprehensive micro-scale simulation. A hybrid or multiscale approach is necessary to overcome this challenge. In this work, a technique was developed for determining the characteristic scales of porous materials, and a multiscale modeling methodology was developed to better understand the interaction/dependence of phenomena occurring at different microscopic scales. The multiscale method couples microscopic simulations at the pore and sub-pore scales. Network modeling is a common pore-scale technique which employs …

Testing And Evaluation Of Shale Stability For Zubair Shale Formation, Ahmed K. Abbas, Ralph E. Flori, Ahmed Al-Anssari, Mortadha Alsaba

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Zubair Formation consists of approximately 55% shale, which causes almost 70% of wellbore problems due to incompatibilities of drilling fluids and shale formations. The most common and effective solution to shale instability is through the design and selection of drilling fluids. Understanding the interaction between drilling fluids and shale has been a challenge due to the complexity of both physical and chemical variations in shale formations. This paper presents some of the important laboratory and well-site testing techniques that are often used by mud engineers for characterizing and remediating drilling fluids and shale interaction. Well-preserved shale samples were analyzed to …

A Proactive Drilling System To Prevent Stuck Pipe And Differential Sticking, Ethar H. K. Alkamil

Doctoral Dissertations

"During drilling operations for the E oilfield in the Mishrif formation in southern Iraq, stuck pipe and differential sticking have been identified as significant geomechanical and drilling problems for several deviated wells. In this work, an integrated approach with three phases is presented to serve as a proactive geo-drilling system to prevent wellbore instability. In the first phase, a comprehensive geomechanical assessment of the Mishrif formation has been carried out to evaluate the in-situ stresses, maximum horizontal stress orientation, pore pressure, rock properties, and rock strength parameters. Moreover, the geomechanical evaluation has been incorporated into the mud design using three …

An Analysis Of Common Drill Stem Vibration Models, Mohammed F. Al Dushaishi, Runar Nygaard, Daniel S. Stutts

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Excessive drill stem (DS) vibration while rotary drilling of oil and gas wells causes damages to drill bits and bottom hole assemblies (BHAs). In an attempt to mitigate DS vibrations, theoretical modeling of DS dynamics is used to predict severe vibration conditions. To construct the model, decisions have to be made on which beam theory to be used, how to implement forces acting on the DS, and the geometry of the DS. The objective of this paper is to emphasize the effect of these assumptions on DS vibration behavior under different, yet realistic, drilling conditions. The nonlinear equations of motion …

Study Of Gas Production From Shale Reservoirs With Multi-Stage Hydraulic Fracturing Horizontal Well Considering Multiple Transport Mechanisms, Chaohua Guo, Mingzhen Wei, Hong Liu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Development of unconventional shale gas reservoirs (SGRs) has been boosted by the advancements in two key technologies: horizontal drilling and multi-stage hydraulic fracturing. A large number of multi-stage fractured horizontal wells (MsFHW) have been drilled to enhance reservoir production performance. Gas flow in SGRs is a multi-mechanism process, including: desorption, diffusion, and non-Darcy flow. The productivity of the SGRs with MsFHW is influenced by both reservoir conditions and hydraulic fracture properties. However, rare simulation work has been conducted for multi-stage hydraulic fractured SGRs. Most of them use well testing methods, which have too many unrealistic simplifications and assumptions. Also, no …

Solvent And Concentration Effects Governing The Hierarchical Organization Of Asphaltenes: A Small-Angle X-Ray Scattering Study, Hasan Rejoanur Rahman

Open Access Theses & Dissertations

Asphaltenes are a group of planar molecules found in crude oil and are prone to aggregation which often causes blockage of pipes along the oil production stream resulting a huge economic downside. In an effort to understand the hierarchical organization of asphaltene in different solvents and concentrations, the solution structure of various asphaltene solutions were studied using small-angle x-ray scattering (SAXS). Solvents were chosen based on miscibility maps. Such maps are generated on the critical value of the solubility parameter difference between asphaltenes or asphaltene components, and a range of solvents. The critical factors that affect asphaltene and asphaltene component …

Understanding Inhibition Of A Biodesulfurization Enzyme To Improve Sulfur Removal From Petroleum, Yue Yu

Theses and Dissertations--Chemical and Materials Engineering

The biodesulfurization 4S-pathway is a promising complementary enzymatic approach to remove sulfur from recalcitrant thiophenic derivatives in petroleum products that remain from conventional hydrodesulfurization method without diminishing the calorific value of oil. The final step of this pathway involves the carbon-sulfur bond cleavage from HBPS, and the production of the final products 2-hydroxybiphenyl (HBP) and sulfite, has been recognized as the rate-limiting step, partially as a result of product inhibition. However, the mechanisms and factors responsible for product inhibition in the last step have not been fully understood. In this work, we proposed a computational investigation using molecular dynamic simulations …

An Integrated Method For Forecasting Well Deliverability In Gas Condensate Reservoirs With Bottom Aquifer Drive, Abdulaziz Ellafi, Ralph E. Flori, Shari Dunn-Norman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gas condensate reservoirs constitute a significant portion of global hydrocarbon reserves. In these reservoirs, liquids develop in the pore space once bottomhole pressure falls below dew point. This results in the formation of a liquid bank near the wellbore region which decreases gas mobility, which then reduces gas inflow. In such complex reservoirs, it is important to correctly describe PVT impacts, adjustments to well test analysis and inflow performance, and then combine all effects in the reservoir analysis. The literature contains many references to individual adjustments of PVT analysis, well testing, or inflow performance for gas condensate reservoirs, but few …

Miscible Gases Based Eor In Unconventional Liquids Rich Reservoirs: What We Can Learn, Dheiaa Alfarge, Mortadha Alsaba, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Over the last decade, Unconventional Liquids Rich Reservoirs (ULR) have become the main target for oil and gas investors as conventional formations started to deplete and diminish in numbers. These unconventional plays have a huge oil reserve; however, the primary oil recovery factor is predicted to be less than 10%. Unconventional Improved Oil Recovery (UIOR) techniques are still a new concept in the oil industry since there is no commercial project reported for any IOR technique yet. Miscible gas based EOR technique might be the most potential strategy to improve oil recovery in such complex plays. In this study, a …

New Insights Of Low Salinity Water Flooding In Low Permeability-Low Porosity Clay Rich Sandstone Reservoir, Ali K. Alhuraishawy, Baojun Bai, Mingzhen Wei, Waleed H. Al-Bazzaz

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

One of the EOR technologies is low-salinity water flooding (LSWF) is an EOR method that operates at a lower cost than other EOR methods, which makes it a preferred area of interest for oil industry economists, who continue to call for EOR costs to come down. The aim is to minimize the possible cost to recover as much oil as possible. The performance of low salinity waterflooding in decreasing residual oil saturation in low permeability-porosity clay-rich sandstone reservoir. Porosity test, core flooding test, XRD and scanning electron microscopy (SEM) tests were achieved in this study. Salinity effect on the porosity, …

Application Of Integrated Reservoir Geomechanics For Well Planning Of High-Angled Wells In A Mature Oil Field, Ahmed K. Abbas, Ralph E. Flori, Yousif M.B. Al-Asadi, Mortadha Alsaba, Nasser A. Al-Hamad

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Zubair oil reservoir has a significant potential to contribute to the petroleum supply in Iraq. Drilling highly deviated wells is a commonly used approach to enhance the production in mature fields. Drilling these wells in the Zubair Formation has been a challenge due to severe wellbore instability issues. This study presents how integrated reservoir geomechanics was used for efficient well planning and safe drilling of nearly horizontal wells (75° Inclination) through Zubair depleted sandstone oil reservoir. In this study, an integrated workflow was implemented mainly to build a geomechanical model using offset well data. The in-situ principal stresses and their …

Learning From Experience: An Automatic Ph Neutralization System Using Hybrid Fuzzy System And Neural Network, Ethar H.K. Alkamil, Seaar Al-Dabooni, Ahmed K. Abbas, Ralph Flori, Donald C. Wunsch

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In oil and gas industry, the pH level is one of the most important indicators of mud contamination while drilling. Although the process has simple components, the pH neutralization process is complicated in the mud circulation system. This difficulty is due to the high nonlinearity of the process. In this paper, the fuzzy neural network (FNN) is integrated to the fuzzy logic controller (FLC) to create a system which identifies pH fluctuation into a drilling mud system, assesses and signals its severity. And then, it automatically actuates a chemical treating fluids valve (CTFV), such as Caustic Soda (CS), for neutralizing …

Using Managed Pressure Drilling To Reduce Stuck Pipe Problem, Ethar H.K. Alkamil, Husam R. Abbood, Ralph E. Flori, George Medley, Sagar Nauduri, Mortadha Alsaba

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Differences between mud pressure in a wellbore and pore pressure in high permeability rocks can lead to differential sticking, particularly when drilling deviated wells and encountering mud losses. Several solutions, all challenging, can be used to address this problem, where the conventional mitigation method of managing the mud weight (MW) is often used. However, managed pressure drilling (MPD) offers a promising solution with a positive risk-adjusted cost and other benefits. Wells in the E oilfield in southern Iraq are typically drilled overbalanced and therefore often experience a high percentage of non-productive time (NPT) due to differential sticking. This study evaluates …

A Novel Ultra-Low Interfacial Tension Nanofluid For Enhanced Oil Recovery In Super-Low Permeability Reservoirs, Derong Xu, Baojun Bai, Ziyu Meng, Qiong Zhou, Zhe Li, Yao Lu, Hairong Wu, Jirui Hou, Wanli Kang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The exploration and development of super-low permeability reservoirs have become a global focus in recent years. However, conventional flooding systems commonly face problems of high injection pressure and poor displacement efficiency in super-low permeability reservoirs. Thus, it is imperative to find new flooding agents that tackle such problems. In this study, a novel ultra-low interfacial tension (IFT) nanofluid was formulated, consisting of surfactants to achieve ultra-low IFT and silica nanoparticles to reduce injection pressure. The compatibility test between the surfactants and silica nanoparticles in 10,000 mg/L NaCl solution at 90 °C was conducted to ensure their adaption to harsh reservoir …

Using Artificial Intelligence And Machine Learning To Develop Synthetic Well Logs, Marwan Mohammed Alnuaimi

Graduate Theses, Dissertations, and Problem Reports (ETD)

There has been an increase in the need for energy in the recent past. Oil and gas stand as the source of energy that are widely used. The oil and gas reservoirs are targeted for the purposes of field development. The conventional methods of reservoir characteristics require computing techniques that are unique and complex, some of which are labor and time intensive. Mohaghegh argues that all efforts must be tried and made possible to apply Petroleum Data analytics in production and management of reservoir so as to earn a maximum return (Mohaghegh, Shale Analytics, 2017). Different methodologies have been applied …

Advanced Ion Management To Improve Oil Recovery In Oil-Wet Carbonate-Sandstone Composite Reservoirs, Ali K. Alhuraishawy, Baojun Bai, Mingzhen Wei, Waleed H. Al-Bazzaz

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Waterflooding with different ionic composition called advanced ion management which play a role with ionic composition of injected water to enhance the oil production. In the last decade, many studies pointed out that the composition of injected water could changes rock wettability during waterflooding. The main purpose of this study is to evaluate the effects of SO4 and low salinity water on improving oil recovery in oil-wet carbonate reservoirs. Sulfate ion concentration, low salinity water, rock composition, porosity, and permeability were examined using a designed model. Typical seawater, increase SO₄, two and three times in the seawater, and …

Effectiveness Of Ammonium Ion In Low Salinity Waterflooding In Shaly-Sandstone Reservoir, Hung Vu Quoc

Chulalongkorn University Theses and Dissertations (Chula ETD)

In this study was presented the pre-feasibility study of silica sand processing plant in Sihanoukville province. The resources approximately 8,750,000 tons, would be a high potential deposit for the glass industry. In this study focuses on the characteristics of the silica sand, methodology to remove the impurities which contained high Fe2O3, Al2O3 and another major oxide element, and economic evaluation technique. To identification of silica sand which used sieve analysis, Frantz isodynamic magnetic separator following by electrical microscope, XRD, and XRF. Therefore, to upgrade the quality of silica sand, which is using Shaking Table, Wet High-Intensity Magnetic Separator, and Reverse …

Comprehensive Evaluation Of A Novel Eor Method-Coupling Low Salinity Water Flooding And Preformed Particle Gel To Enhance Oil Recovery In Fractured Reservoirs, Ali K. Alhuraishawy

Doctoral Dissertations

"Excess water production in oil fields is becoming a challenging economic and environmental problem as more reservoirs are maturing. Water channeling, one of the primary reservoir conformance problems, is caused by reservoir heterogeneities that lead to the development of high-permeability streaks. The recovery of oil from carbonate reservoirs is usually low due to their extreme heterogeneity caused by natural fractures and the nature of oil-wet matrix. Also, oil recovery from fractured sandstone reservoirs is often low due to areal heterogeneity. Gel treatments have proven to be a successful and inexpensive fluid diversion method when used to plug the thief zones …

Geomechanical Characterizations And Correlations To Reduce Uncertainties Of Carbonate Reservoir Analysis, Farqad Hadi

Doctoral Dissertations

"Although carbonate reservoirs hold a wealth of hydrocarbon, they are among the most difficult types of reservoirs to be characterized. Carbonate reservoirs by nature have complex depositional environments and diagenetic processes in which brittle, ductile, fractured rocks, and vugular pores may all exist within small interval. This huge variance in the rock mechanical properties can cause challenges in the reservoir's development, especially in applications related to geomechanics.

The main objective of this research is to geomechanically characterize and correlate the carbonate mechanical properties with their petrophysical properties. A comprehensive review for the geomechanical-petrophysical properties of carbonates was conducted from previous …

Characterization Of Free-Radical Solution Polymerizations Of Acrylamide Initiated By Persulfate Initiator Systems, Yashu Chen

Masters Theses

”In order to reduce the water production and improve the oil recovery of mature reservoir, various conformance control technologies have been extensively developed. Preformed particle gel (PPG), a cost-effective plugging agent, has been successfully applied to block the high permeability zone and thus to displace the water to up-swept zone.

A common PPG based on polyacrylamide hydrogel have been wildly used. Identifying the parameters that affect gelation performance and understand how these parameters affect the performance is very useful to predict and manipulate the gelation time and to control the performance of gels.

The objective of this research is to …

Monobore Completion Design: Classification, Applications, Benefits And Limitations, Anwar Khaled Al-Fadhli

Masters Theses

"A monobore completion is a simple completion design that uses the same internal diameter from the bottom of the well to surface. This may be accomplished by cementing a string of casing in a well, or by having tubing stabbed into a polished bore receptacle on a casing liner the same size as the tubing. Monobore completions have been applied extensively in oil and gas fields around the world, both onshore and offshore, from very low reservoir flow to extremely high production rates, since the late 1980s. They have proven beneficial due to their simplicity and cost savings. This study …

Data Analysis Of Low-Salinity Waterflooding To Enhance The Oil Recovery In Sandstone Reservoirs, Nadia Ariani

Masters Theses

"The lack of a single reasonable general mechanism to describe how low-salinity waterflooding can improve oil recovery in both laboratory and field pilot projects has increased the interests of many researchers and stakeholders. There has not been observed the relationship of formation brine salinity and injected brine salinity to see how much salinity is reduced to produce the maximum enhanced oil recovery by LSWF. There is no guidance in what EOR stage the LSWF is best implemented. This work collects data from various published literature to develop a comprehensive data set regarding low-salinity waterflooding in sandstone reservoirs. The LSWF mechanisms …