Aerospace Engineering Commons^™

Heat Transfer In Triangular Ducts With Axial Conduction,Containing Porous Medium, Abhishek Banerjee

Mechanical and Aerospace Engineering Theses - Archive

The objective of this study is to find a numerical solution for the velocity and temperature field in a duct of triangular cross-section area. A fully saturated porous medium is considered to be present in the duct. The study reports the contribution of axial conduction in heat transfer to flow passing through triangular porous passages. The terms in x-direction are retained in the energy equation due to the presence of axial conduction. Also, because of the geometrical asymmetry, non-orthogonal boundary conditions can exist and thus make the determination of heat transfer more difficult. The problem under consideration uses H2 boundary …

Nonlinear Finite Element Analysis Of Columns, Rajkiran Muppavarapu

Mechanical and Aerospace Engineering Theses - Archive

In many engineering applications structural components are considered to be beams or columns subjected to a range of external loads such as dead weight, wind, temperature changes etc.In this work a mathematical model has been developed for a sports lighting tower considering it to be a cantilever beam with large deformation. The concept of non-linear P-Delta analysis is applied to the column. Using this model, a tower analysis tool was developed in MATLAB. Using this tool various design alternatives can be examined to evaluate their suitability to a particular task.A number of example problems from the available literature were solved …

Stable Reference Trajectory Modification For Handling Actuator Failure In Control Systems, Ifeolu Olalekan Ogunleye

Mechanical and Aerospace Engineering Theses - Archive

The issue of rapidly reconfiguring the reference trajectory under unanticipated actuator failures in order to regain lost performance or aircraft handling qualities is explored. The failures detected in real-time are compensated for by ensuring the input to the system reflects current system conditions. This thesis will also show that only the general structure of the failed system component is needed to achieve successful failure detection and reference trajectory reconfiguration. This approach allows the nominal control structure to remain unchanged in the presence of change flight and system conditions. Acceptable system performance is recovered by detecting the actuator failures in real-time. …

Cfd Analysis Of A Uni-Directional Impulse Turbine For Wave Energy Conversion, Carlos Alberto Velez

Electronic Theses and Dissertations

Ocean energy research has grown in popularity in the past decade and has produced various designs for wave energy extraction. This thesis focuses on the performance analysis of a uni-directional impulse turbine for wave energy conversion. Uni-directional impulse turbines can produce uni-directional rotation in bi-directional flow, which makes it ideal for wave energy extraction as the motion of ocean waves are inherently bi-directional. This impulse turbine is currently in use in four of the world’s Oscillating Wave Columns (OWC). Current research to date has documented the performance of the turbine but little research has been completed to understand the flow …

Super-Adiabatic Combustion In Porous Media With Catalytic Enhancement For Thermoelectric Power Conversion, Kyle Thomas Mueller

Electronic Theses and Dissertations

The combustion of ultra-lean fuel to air mixtures provides an efficient way to convert the chemical energy of hydrocarbons into useful power. Conventional burning techniques of a mixture have defined flammability limits beyond which a flame cannot self-propagate due to heat losses. Matrix stabilized porous medium combustion is an advanced technique in which a solid porous matrix within the combustion chamber accumulates heat from the hot gaseous products and preheats incoming reactants. This heat recirculation extends the standard flammability limits and allows the burning of ultra-lean fuel mixtures, conserving energy resources, or the burning of gases of low calorific value, …

Magnetometer-Only Attitude Determination With Application To The M-Sat Mission, Jason D. Searcy

Masters Theses

"The topic of this thesis focuses on attitude determination for small satellites. The method described uses only a magnetometer to resolve the three-axis attitude of the satellite. The primary challenge is that magnetometers only instantaneously resolve two axes of a satellite's attitude. Typically, magnetometers are used in conjunction with other sensors to resolve all three axes. However, by using a filter over an adequately long orbit arc, the magnetometer data can yield all the information necessary. The magnetic field data are filtered to obtain the magnetic field derivative vector, which are combined with the magnetic field vector to fully resolve …

Use Of Bio-Ethanol And Bio-Diesel The Key Solution For A More Sustainable Road Transport, Alberto Boretti

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Life Cycle Analysis (LCA) of alternative transportation fuels clearly shows the advantages of reducing the use of nonrenewable fossil fuels vs. renewable biologic novel fuels to reduce the emissions of carbon dioxide. Being based on the natural recycle of carbon dioxide through the use of renewable energy sources, use of these renewable fuels does not imply depletion of natural resources and is therefore sustainable in the long term. Renewable fuels and advanced internal combustion engines and powertrains are the technologies that in addition to be the most likely to produce benefits in term of carbon balance and fossil fuel saving, …

Use Of Bio Ethanol The Key Solution For A More Sustainable Road Transport, Alberto A. Boretti

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Life Cycle Analysis (LCA) of alternative transportation fuels clearly shows the advantages of reducing the use of nonrenewable fossil fuels vs. renewable synthetic and biologic novel fuels to reduce the emissions of carbon dioxide. Being based on the natural or synthetic recycle of carbon dioxide through the use of renewable energy sources, use of these renewable fuels does not imply depletion of natural resources and is therefore sustainable in the long term. Renewable fuels and advanced internal combustion engines and powertrains are the technologies that in addition to be the most likely to produce benefits in term of carbon balance …

On The Advantages Of E100 Over Gasoline In Down-Sized, Turbo-Charged, Direct-Injected, Variable Valve Actuated, And Stoichiometric S.I. Engines, Alberto A. Boretti

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Current flexi fuel gasoline and ethanol engines have efficiencies generally lower than dedicated gasoline engines. Considering ethanol has a few advantages with reference to gasoline, namely the higher-octane number and the larger heat of vaporization, the paper explores the potentials of dedicated pure ethanol engines using the most advanced techniques available for gasoline engines, specifically direct injection, turbo charging and variable valve actuation. Computations are performed with state-of-the-art, well validated, engine and vehicle performance simulations packages, generally accepted to produce accurate results targeting major trends in engine developments. the higher compression ratio and the higher boost permitted by ethanol allows …

Alternative Crankshaft Mechanisms And Kinetic Energy Recovery Systems For Improved Fuel Economy Of Passenger Cars, Alberto A. Boretti, Joseph Scalzo, Houshang Masudi

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The paper presents a novel design of a variable compression ratio advanced spark ignition engine that also permits an expansion ratio that may differ from the compression ratio therefore generating an Atkinson cycle effect. the stroke ratio and the ratio of maximum to minimum in-cylinder volumes may change with load and speed to provide the best fuel conversion efficiency. the variable ratio of maximum to minimum in-cylinder volumes also improves the full load power output of the engine. Brake specific fuel consumption maps are computed for a gasoline engine 2 Liters, in-line four, turbocharged and direct injection showings significant fuel …

Ultra-Abrupt Tapered Fiber Mach-Zehnder Interferometer Sensors, B. Li, J. Lan, W. Sumei, L. Zhou, Hai Xiao, Hai-Lung Tsai

Electrical and Computer Engineering Faculty Research & Creative Works

A fiber inline Mach-Zehnder interferometer (MZI) consisting of ultra-abrupt fiber tapers was fabricated through a new fusion-splicing method. By fusion-splicing, the taper diameter-length ratio is around 1:1, which is much greater than those (1:10) made by stretching. The proposed fabrication method is very low cost, 1/20-1/50 of those of LPFG pair MZI sensors. The fabricated MZIs are applied to measure refractive index, temperature and rotation angle changes. The temperature sensitivity of the MZI at a length of 30 mm is 0.061 nm/°C from 30-350 °C. The proposed MZI is also used to measure rotation angles ranging from 0° to 0.55°; …

Beading And Dimpling Techniques To Improve The Vibration And Acoustic Characteristics Of Plate Structures, Nabeel Taiseer Alshabtat

Dissertations

A method of improving the vibroacoustic characteristics of beams and plates is presented. This method is based on creating dimples or beads on the surface of the structures. The proposed method couples the finite element method with an optimization technique based on the genetic algorithm (GA). The improvement of the vibroacoustic characteristics of beams and plates is achieved by two separate strategies. The first strategy is optimizing the natural frequencies of beams and plates. The second strategy is minimizing the sound radiation from such vibrating structures. Optimizing the natural frequencies of some types of beams and simply supported plates by …

Ductile Mode Material Removal Of Ceramics And Semiconductors, Deepak Ravindra

Dissertations

Ceramics and semiconductors are hard, strong, inert and lightweight. They also have good optical properties, wide energy bandgap and high maximum current density. This combination of properties makes them ideal candidates for tribological, semiconductor, MEMS and optoelectronic applications respectively. Manufacturing these materials without causing surface and subsurface damage is extremely challenging due to their high hardness, brittle characteristics and poor machinability. However, ductile regime machining of these materials is possible due to the high-pressure phase transformation occurring in the material caused by the high compressive stresses induced by the single point diamond tool tip. In this study, to further augment …

Shock-Associated Noise Generation In Curved Coanda Turbulent Wall Jets, Caroline P. Lubert, Richard J. Shafer

Department of Mathematics and Statistics - Faculty Scholarship

Curved three-dimensional turbulent Coanda wall jets are present in a multitude of natural and engineering applications. The mechanism by which they form a shock-cell structure is poorly understood, as is the accompanying shock-associated noise (SAN) generation. This paper discusses these phenomena from both a modeling and experimental perspective. The Method of Characteristics is used to rewrite the governing hyperbolic partial differential equations as ordinary differential equations, which are then solved numerically using the Euler predictor-corrector method. The effects of complicating factors -- such as radial expansion and streamline curvature -- on the prediction of shock-cell location are then discussed. This …

X-51 Composite Airframe, Brendon J. Townshend

Aerospace Engineering

This paper gives an overview of the progress that has been made in the design build of the X-51.  The X-51 is a composite scale replica of a P-51D fuselage integrated with a P-51H wing.  Issues with the airframe as well as current action items are discussed, as well as findings so far in preliminary design.

Mapping Galileo's Trajectory, Mark Woods

Aerospace Engineering

The NASA Galileo mission was mapped out using a patched conics approximation.  Galileo launched from Earth, underwent a gravity assist from Venus back to Earth for another gravity assist.  Galileo then came back to Earth for one more gravity assist to propel it to Jupiter.  A simulation ignoring all perturbations (i.e. third body effects, zonal (harmonics, solar wind, drag) was carried out.  The simulation was able to make it to the final Earth flyby before diverging from the actual trajectory.  The simulated and actual flyby dates all differed by less than 5 hours, and the simulated and actual flyby altitudes …

Flight Testing In A Simulation Based Environment, David W. Babka

Aerospace Engineering

Over the past two decades performance flight testing of full scale aircraft has transferred some of the testing workload to simulation based systems.  Flight testing full scale aircraft in the real world environment has always been expensive, especially now with the rise in aviation fuel costs. Additionally, new emerging technologies require extensive testing and doing so in the full scale environment is cost prohibitive.  A cheaper alternative is to test systems in a simulation based environment.  Not only can aircraft be simulated via a computer, but all the aircrafts systems can be modeled in the simulation.  Furthermore, most of the …

Space Mission Engineering: The New Smad, James R. Wertz, David F. Everett, Jeffery J. Puschell

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by James Wertz, David Everett, and Jeffery J. Puschell on "Space Mission Engineering: The New SMAD" in 2011.

Assessment Of Turbulence-Chemistry Interaction In Hypersonic Turbulent Boundary Layers, L. (Lian) Duan, M. P. Martín

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Studies of the turbulence-chemistry interaction are performed in hypersonic turbulent boundary layers using direct numerical simulation flow fields under typical hypersonic conditions representative of blunt-body and slender body hypersonic vehicles, with super catalytic and noncatalytic wall conditions in pure air. Nondimensional governing parameters, the interaction Damköhler number and the interaction relative heat release, are proposed to measure the influence of turbulence-chemistry interaction on flow composition and temperature. Both a priori and posteriori studies are performed to assess the effect of turbulence-chemistry interaction on chemical production rates and mean and turbulent flow characteristics. It is found that the governing parameters provide …

The Influence Of Pressure Relaxation On The Structure Of An Axial Vortex, Robert L. Ash, Irfan Zardadkhan, Allan J. Zuckerwar

Mechanical & Aerospace Engineering Faculty Publications

Governing equations including the effects of pressure relaxation have been utilized to study an incompressible, steady-state viscous axial vortex with specified far-field circulation. When sound generation is attributed to a velocity gradient tensor-pressure gradient product, the modified conservation of momentum equations that result yield an exact solution for a steady, incompressible axial vortex. The vortex velocity profile has been shown to closely approximate experimental vortex measurements in air and water over a wide range of circulation-based Reynolds numbers. The influence of temperature and humidity on the pressure relaxation coefficient in air has been examined using theoretical and empirical approaches, and …

Drag Reduction Of A Modern Straight Truck, Drew Landman, Matthew Cragun, Mike Mccormick, Richard Wood

Mechanical & Aerospace Engineering Faculty Publications

A wind tunnel test program was conducted at the Langley Full Scale Tunnel (LFST) to evaluate the performance of five passive drag reduction configurations on a modern straight truck at full scale. Configurations were tested in a build-up fashion with results representing a cumulative effect. Tested configurations include a front valance, a front box fairing, a boat-tail, an ideal side-skirt, and a practical side-skirt. Configurations were evaluated over a nominal 9 degree yaw sweep to establish wind averaged drag coefficients using SAE J1252. Genuine replicate yaw sweeps were used in an uncertainty analysis. Results show up to 28% improvement in …

Experimental Flow Visualization For Corrugated Airfoils At Low Reynolds Number Including Development Of A Pitch And Plunge Fixture, Jeremy Ryan Sparks

University of Kentucky Master's Theses

Micro Air Vehicles (MAV’s) have small size and extreme maneuverability which makes them ideal for surveillance. Propulsion mechanisms include propellers, rotors, and flapping airfoils. Flapping motions, along with biologically-inspired wing profiles, are of interest due to their use of natural physics. Corrugated airfoil structures appears to have poor aerodynamic performance at higher Reynolds numbers, but serve well at Re<10,000. Understanding flow structures around corrugated profiles and comparing them to a standard airfoil will aid in understanding how these corrugated profiles perform well and have been adopted by some of nature’s most acrobatic flyers. Motivation for this investigation is to compare static flow visualizations of corrugated profiles to a standard National Advisory Committee for Aeronautics (NACA) airfoil from low to high angles of attack and further observe flow structure development of a pitching and plunging flat plate at a Re<10,000 and a Strouhal number relevant to natural fliers. The static visualization was conducted at Re=1,000 with a NACA 0012 airfoil and two corrugated models. The Pitch and Plunge Fixture (PPF) developed was constructed by simplifying flapping wings as a two degree of freedom motion in plunge (translation) and pitch (rotation). Results obtained from the PPF were compared with a numerical simulation.

Perch Landing Maneuvers And Control For A Rotating-Wing Mav, Jonathan Louis Lubbers

University of Kentucky Master's Theses

This thesis addresses flight control of the perch landing maneuver for micro-aerial vehicles. A longitudinal flight model is constructed for a pigeon-sized aircraft. In addition to a standard elevator control surface, wing-rotation also considered as a non-standard actuator for increasing low-speed aerodynamic braking. Optimal state and control trajectories for the perch landing maneuver are computed using commercial software. A neighboring optimal control law is then developed and implemented in a set of flight simulations. Simulations are run with both a quasisteady and an unsteady aerodynamic model. The effectiveness of wing rotation and of the neighboring optimal control law is discussed, …

Enhancement Technique For Aerial Images, Sertan Erkanli, Ahmet Gungor Pakfiliz, Jiang Li

Electrical & Computer Engineering Faculty Publications

Recently, we proposed an enhancement technique for uniformly and non-uniformly illuminated dark images that provides high color accuracy and better balance between the luminance and the contrast in images to improve the visual representations of digital images. In this paper we define an improved version of the proposed algorithm to enhance aerial images in order to reduce the gap between direct observation of a scene and its recorded image.

Quantifying Model Uncertainty Using Measurement Uncertainty Standards, Harsheel Rajesh Shah

Masters Theses

"Model uncertainty quantification is mainly concerned with the problem of determining whether the observed data is consistent with the model prediction. In real world, there is always a disagreement between a simulation model prediction and the reality that the model intends to represent. Our increased dependence on computer models emphasizes on model uncertainty which is present due to uncertainties in model parameters, lack of appropriate knowledge, assumptions and simplification of processes. In addition, when models predict multi-variate data, the experimental observation and model predictions are highly correlated. Thus, quantifying the uncertainty has a basic requirement of comparison between observation and …

The Effect Of Mmod Porosity On Crater Depth After Hypervelocity Impact, David Ledesma

Open Access Theses & Dissertations

A significant amount of research has been conducted in the last decades on the design of spacecraft shielding for the impacts of Micro Meteoroid and Orbital Debris (MMOD). Through the use of hydrocodes, empirical data, and physical testing, researchers have been successful in studying a wide range of shielding configurations. However, a very limited amount of research has been conducted to understand the effect that the porosity and irregular shape of MMOD has on the damage they create on spacecraft components.

The work presented in this thesis addresses the modeling of MMDO porosity by using the CTH hydrocode to investigate …

Study Of Turbulence-Radiation Interaction In Hypersonic Turbulent Boundary Layers, L. (Lian) Duan, A. M. Feldick, M. P. Martín, M. F. Modest, D. A. Levin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In the paper, we conduct direct numerical simulations (DNS) to investigate the effect of turbulence-radiation interaction (TRI) in hypersonic turbulent boundary layers, representative of the Orion crew exploration vehicle (CEV) at peak heating condition during reentry. The radiative transfer equation (RTE) is solved using the tangent slab approximation. 1 The RTE solver is line-by-line (LBL) accurate, making use of a developed efficient spectral database 2 for spectral modeling. A multi-group full-spectrum correlated-k-distribution (FSCK) method 3 is used to reduce the number of RTE evaluations while preserving LBL accuracy. A nondimensional governing parameter to measure the significance of TRI is proposed, …

Study Of Turbulence-Chemistry Interaction In Hypersonic Turbulent Boundary Layers, Lian Duan, M. Pino Martín

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Studies of the turbulence-chemistry interaction (TCI) are performed in hypersonic turbulent boundary layers using direct numerical simulation (DNS) flow fields under typical hypersonic conditions representative of blunt-body and slender-body hypersonic vehicles, with super catalytic and noncatalytic wall conditions in pure air. Nondimensional governing parameters, 'interaction' Damk̈ohler number and relative heat release, are proposed to measure the influence of TCI on flow composition and temperature. Both a priori and posteriori studies are performed to assess the effect of TCI on chemical production rates and mean and turbulence flow characteristics. In addition, an effective approach (called PDF-TS) to estimate the intensity of …

Analysis Of Surface Augmentation Of Airfoil Sections Via Flow Visualization Techniques, John Louis Vento

Aerospace Engineering

This report details an experiment done to verify the effectiveness of two passive flow control systems on two-dimensional airfoil sections. The flow control was tested on two types of airfoils: a symmetric NACA 0011, intended to represent an airplane in cruise, and a NACA16611, intended to represent an aircraft with flaps extended.  Two types of passive systems were employed, a dimple surface augmentation, similar to a golf ball, and a grit system located at 20% chord. Airfoils without either augmentation were tested as a control case. Using a water tunnel and dye to perform flow visualization, the effects of each …

A Shock Tube Technique For Blast Wave Simulation And Studies Of Flow Structure Interactions In Shock Tube Blast Experiments, Nicholas N. Kleinschmit

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Improvised explosive devices (IED’s) are widely used against US and allied forces fighting in Iraq and Afghanistan. Exposure to IED blast may cause blast-induced traumatic brain injury (bTBI). The injury mechanisms are however not well understood. A critical need in bTBI-related research is the ability to replicate the loading conditions of IED blast waves in a laboratory environment. In this work, experimental studies have been carried out to explore the use of the shock tube technique for generating air shock waves that mimic the temporal and spatial characteristics of free-field blast waves and to investigate the blast wave-test sample interactions …