Aerospace Engineering Commons^™

A Machine Learning-Based Apogee Prediction Methodology For Experimental Student Rockets, Price Hamilton Drawdy

Senior Honors Theses

The ability to predict the maximum altitude of a rocket (apogee) in real-time is incredibly useful for collegiate-level competition rockets. This project creates a machine learning-based real-time apogee prediction methodology. Three model types were tested: linear regression, random forest, and a 3-layer multi-layer perceptron (MLP) neural network. These models were trained on a large dataset of simulated flights. All models performed well on simulated test flights, with the linear regression model showing most promise for use on edge compute. More development and real-world testing are necessary to determine how applicable this method is for real-time operation. Nevertheless, this methodology provides …

A Polar Turbulence Invariant Map With Applicability To Realisable Machine Learning Turbulence Models, James G. Wnek, Christopher Schrock, Eric M. Wolf, Mitch Wolff

Mechanical and Materials Engineering Faculty Publications

Invariant maps are a useful tool for turbulence modelling, and the rapid growth of machine learning-based turbulence modelling research has led to renewed interest in them. They allow different turbulent states to be visualised in an interpretable manner and provide a mathematical framework to analyse or enforce realisability. Current invariant maps, however, are limited in machine learning models by the need for costly coordinate transformations and eigendecomposition at each point in the flow field. This paper introduces a new polar invariant map based on an angle that parametrises the relationship of the principal anisotropic stresses, and a scalar that describes …

Multi-Fidelity Machine Learning Modeling For Aerodynamic Response Prediction Of Aerospace Vehicles, Ethan S. Jackman

Theses and Dissertations

Hypersonic vehicle design requires understanding complex aerodynamic phenomena across the full flight regime. This study presents a novel MF surrogate modeling methodology that enables the prediction the full field response across a vehicle’s surface. A Space-Filling Curve (SFC) is used to convert unstructured data into 1D vectors. The a Convolutional Autoencoder is used with transfer learning to reduce the dimensionality of the data. An Emulator-Embedded Neural Network (E2NN) combines multi-fidelity data for fast, accurate predictions. A benchmark analytical example and hypersonic application are used to evaluate the methodology. Using various numbers of samples and sampling strategies it is found that …

Optimizing Concrete Strength: How Nanomaterials And Ai Redefine Mix Design, Dan Huang, Guangshuai Han, Ziyang Tang

Physics and Engineering Science

Nanomaterials and supplementary cementitious materials (SCMs) are typically used together in efforts to enhance the performance of concrete and mitigate the environmental impact of concrete construction. However, the complex interactions between nanomaterials, SCMs, and cement make concrete mix design a challenging, iterative, and labor-intensive process, often relying on trial-and-error experimentation. Machine learning (ML) offers an opportunity to better understand the influence of input parameters and to accelerate the optimization of mix designs through data-driven insights. This study proposes an open-source and easy-to-access framework, Canopy, to support the concrete research community in optimizing mix design. Using a dataset collected from the …

Satellite Reorientation Using Reinforcement Learning Under Unknown Attitude Failure, Matthew Willoughby

Doctoral Dissertations and Master's Theses

This study presents a reinforcement learning (RL) approach for reestablishing communication with deep-space satellites under unknown attitude determination and control system (ADCS) failures. When traditional fault-tolerant control methods cannot restore signal, the proposed RL controller acts as a last-resort measure by autonomously reorienting the satellite’s antenna toward Earth while charging the battery via solar panels. A generic reward function, designed for the RL-based method, enables the controller to adapt to diverse failure scenarios, including severe actuator noise, misalignment, and complete actuator failure. Simulations are conducted in the Basilisk environment and trained with the tonic framework and demonstrate ranging capabilities of …

Developing End-To-End Imitation Learning For Asteroid Proximity Operations, Patrick David Quinn

Theses and Dissertations

Asteroid exploration remains a popular topic in the scientific community, however hurdles still exist for controlling spacecraft within the asteroid environment. Communication delays often require the usage of limited onboard computing hardware for navigation. Additionally, long mission timelines must be accommodated with highly efficient fuel use. Considering these issues, it is apparent that any guidance, navigation, and control (GNC) system in these spacecraft should emphasize both computational and fuel efficiency in its design. Furthermore, the integration of a robust state estimation system is necessary for the successful deployment of such systems. The development of a controller aiming to address these …

Machine Learning Methods For Hypervelocity Fragment Flyout Characterization, Katharine Larsen

Doctoral Dissertations and Master's Theses

Resulting from breakup events, such as collisions and explosions, hypervelocity fragments create potential hazards for both terrestrial and on-orbit environments, such as terrestrial weapons explosions and satellite breakup events, respectively. To avoid unnecessary damage, an accurate understanding or characterization of hypervelocity fragmentation events is vital. Currently, publicly available two-line elements collected from on-orbit breakup events are limited, excluding pre-detonation parent body conditions, such as orientation, and information of smaller fragments. The uncertainty of these datasets varies between each collected set. Therefore, the overall goal of this work is to employ machine learning to estimate distribution characteristics of a space debris …

Delivery Of Medical Supplies To Remote Locations Via Unmanned Aerial Vehicles: Approaches, Challenges, And Solutions, Meshari Aljohani, Ravi Mukkamala, Stephanie Olariu

Computer Science Faculty Publications

Unmanned Aerial Vehicles (UAVs) are becoming more important in improving healthcare logistics, in particular due to their cost effectiveness, minimized risk, and versatile operational capabilities. This study explores the deployment of autonomous UAVs to deliver medical supplies to remote areas. Advances in ledger technology, smart contracts, and machine learning have transformed tasks previously managed by human teams or manually controlled UAVs into fully autonomous missions. We present a comprehensive analysis of the challenges and initial solutions vital for the effective use of autonomous UAVs in the delivery of medical supplies. In addition, we propose a machine-learning model to optimize UAV …

Optimal Manipulation Motion Action Planner Enabled By Physics Informed Neural Networks, Jonathon E. Slightam, Logan E. Beaver

Mechanical & Aerospace Engineering Faculty Publications

Autonomous robotic manipulation in unstructured environments faces many challenges and is hindered by capabilities that bridge the gap between perception and acting on the world. Action plans that are centric to object motion rather than end-of-arm tooling behavior may aid this. This paper presents an autonomous action planner for a feedback linearizeable system comprised of three base motions that can be leveraged on their own or in combination to give custom motion plans. The optimization routine for the three different types of motion are presented, which are integrated into physics informed neural networks. A component of this is the autonomy …

Development Of A Design Tool For Tow-Steered Composite Structures With Machine Learning-Assisted Modeling, Bangde Liu

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

Fiber-reinforced composites (FRCs) are widely used in aerospace, automotive, and other engineering applications due to their lightweight characteristics and superior mechanical properties. Traditional FRCs employ a fixed fiber orientation in each layer, and while different layup sequences can tailor performance, the mechanical properties remain spatially uniform. Tow-steered composites, which enable fibers to follow curvilinear paths, offer the potential for spatially varying stiffness and strength, improving structural performance.

This dissertation addresses key challenges in modeling and designing tow-steered composite structures, including the lack of commercial design tools, the high computational cost of design optimization, and the need to efficiently evaluate manufacturing …

Predictive Maintenance Analysis Of Turbofan Engine Sensor Data, Stanley A. Melkumian

The Journal of Purdue Undergraduate Research

Predictive maintenance in aviation and aerospace applications is among the most explored problems in machine learning (ML) and artificial intelligence (AI), and datasets such as NASA’s C-MAPPS turbofan engine degradation simulation data have proven invaluable, helping researchers explore numerous questions on engine performance, maintenance, and failure. The purpose of this study was to extend the current research on predicting the remaining useful life (RUL) of engines and their risk classification. Starting with simple yet under-investigated nonlinear survival and random forest models, the analysis implemented eXtreme Gradient Boosting (XGBoost) and long short-term memory (LSTM) from TensorFlow’s Keras library. For both regression …

Unmanned Aerial Vehicle (Uav)-Based High-Throughput Phenotyping For Maize Improvement, Eric T. Rodene

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Modern breeding programs rely heavily on efficiently screening large numbers of genotypes for agronomic traits, such as disease resistance, drought tolerance, and yield. Identifying the genetic loci or genes associated with these traits using GWAS or functional analyses will benefit future plant breeding efforts seeking to incorporate these traits into new crop varieties, whether through conventional breeding or gene editing techniques. Unmanned aerial vehicle (UAV)-based image data has been increasingly used for this task, as it allows entire test plots to be quickly and cost-effectively phenotyped. In my research, I have developed methods to improve the accuracy of machine learning …

Quantitative Assessment And Characterization Of Tool Wear Phenomena In Advanced Manufacturing Processes, Oybek Valijonovich Tuyboyov

Technical science and innovation

This paper explores the quantitative assessment and characterization of tool wear phenomena in advanced manufacturing processes, employing a multifaceted approach encompassing traditional measurements, image processing, machine learning, and predictive modeling. The study emphasizes the intricate dynamics of tool wear and its direct impact on cutting tool performance, addressing challenges in real-time monitoring and optimization of machining operations. Traditional methods like VBmax measurement are juxtaposed with advanced techniques such as the improved conditional generative adversarial net with a high-quality optimization algorithm (CGAN-HQOA), efficient channel attention destruction and construction learning (ECADCL), and shape descriptors based on contour, moments, orientations, and texture. Artificial …

Experimental, Computational, And Machine Learning Methods For Prediction Of Residual Stresses In Laser Additive Manufacturing: A Critical Review, Sung Heng Wu, Usman Tariq, Ranjit Joy, Todd Sparks, Aaron Flood, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In recent decades, laser additive manufacturing has seen rapid development and has been applied to various fields, including the aerospace, automotive, and biomedical industries. However, the residual stresses that form during the manufacturing process can lead to defects in the printed parts, such as distortion and cracking. Therefore, accurately predicting residual stresses is crucial for preventing part failure and ensuring product quality. This critical review covers the fundamental aspects and formation mechanisms of residual stresses. It also extensively discusses the prediction of residual stresses utilizing experimental, computational, and machine learning methods. Finally, the review addresses the challenges and future directions …

Analysis And Detection Of Cyber Attacks In Multi Vehicle Systems Using Macroscopic Models, Abhishek Kashyap

Mechanical and Aerospace Engineering Dissertations - Archive

The study of potential cyber-attacks in different domains is an active area of research. Given that systems are becoming more and more interconnected, cyber physical systems that operate infrastructure and/or plants can make these assets more vulnerable and open to different attack vectors. The primary focus of this research is the modeling, analysis and detection of cyber-attacks on platoons of autonomous cars and swarms of UAVs. In this work, we consider scenarios wherein an attacker may hack into a subset of vehicles in a multi-vehicle system and make subtle modifications in their parameters. Due to the interconnected nature of the …

Optimal Tilt-Wing Evtol Takeoff Trajectory Prediction Using Regression Generative Adversarial Networks, Shuan Tai Yeh, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft have attracted tremendous attention nowadays due to their flexible maneuverability, precise control, cost efficiency, and low noise. The optimal takeoff trajectory design is a key component of cost-effective and passenger-friendly eVTOL systems. However, conventional design optimization is typically computationally prohibitive due to the adoption of high-fidelity simulation models in an iterative manner. Machine learning (ML) allows rapid decision making; however, new ML surrogate modeling architectures and strategies are still desired to address large-scale problems. Therefore, we showcase a novel regression generative adversarial network (regGAN) surrogate for fast interactive optimal takeoff trajectory predictions of …

An Enhanced Deep Autoencoder For Flight Delay Prediction, Desmond B. Bisandu, Dan Andrei Soviani-Sitoiu, Irene Moulitsas

Journal of Aviation/Aerospace Education & Research

Accurate and timely flight delay prediction cannot be overemphasized because of the ever-increasing demand for air travel and its importance in deploying intelligent transportation systems. Nonetheless, there has not been a universal solution to the problem, as more intelligent flight decision systems are required for the aviation industry's future growth. Existing flight delay classification and prediction approaches are mainly shallow traffic models and do not satisfy many applications in the real world. Our motivation to rethink the deep architecture model for predicting flight delays emanates from the problem. In this research, we proposed a technique that modified stacked autoencoder architecture …

Leveraging Artificial Intelligence To Improve Data Configuration & Accuracy In Modern Flight Management Systems, Sreeram Chittayil

International Journal of Aviation, Aeronautics, and Aerospace

AI (Artificial intelligence) can automate the process of generating optimized flight routes using real-time data, such as AIRAC (Aeronautical Information Regulation and Control), significantly reducing the time needed for flight management tasks. While AIRAC data typically takes up to 28 days to refresh, AI could condense this process to just minutes, enhancing operational efficiency and ensuring pilots have timely and accurate flight information. The research includes practical experiments, prototype code, and visual case studies to demonstrate AI's role in optimizing FMS functions while addressing issues related to data input errors and human intervention. Key findings from trials show the algorithm's …

Applications Of Ai/Ml In Maritime Cyber Supply Chains, Rafael Diaz, Ricardo Ungo, Katie Smith, Lida Haghnegahdar, Bikash Singh, Tran Phuong

School of Cybersecurity Faculty Publications

Digital transformation is a new trend that describes enterprise efforts in transitioning manual and likely outdated processes and activities to digital formats dominated by the extensive use of Industry 4.0 elements, including the pervasive use of cyber-physical systems to increase efficiency, reduce waste, and increase responsiveness. A new domain that intersects supply chain management and cybersecurity emerges as many processes as possible of the enterprise require the convergence and synchronizing of resources and information flows in data-driven environments to support planning and execution activities. Protecting the information becomes imperative as big data flows must be parsed and translated into actions …

Integrated Organizational Machine Learning For Aviation Flight Data, Michael J. Pritchard, Austin T. Walden, Paul J. Thomas

Journal of Aviation/Aerospace Education & Research

Increased availability of data and computing power has allowed organizations to apply machine learning techniques to various fleet monitoring activities. Additionally, our ability to acquire aircraft data has increased due to the miniaturization of small form factor computing machines. Aircraft data collection processes contain many data features in the form of multivariate time series (continuous, discrete, categorical, etc.) which can be used to train machine learning models. Yet, three major challenges still face many flight organizations: 1) integration and automation of data collection frameworks, 2) data cleanup and preparation, and 3) developing an embedded machine learning framework. Data cleanup and …

Machine Learning-Assisted Multiscale Simulation And Design Optimization Of Composite Jackets Under Low-Velocity Impacts, Masoud Mohammadi

Graduate Theses, Dissertations, and Problem Reports (ETD)

This research presents the development of a data-driven machine learning-assisted approach to simulate and optimize the design of composite materials subjected to low-velocity impacts. It focuses on a specific type of hybrid composite comprised of fiberglass and Kevlar fabrics stitched with Kevlar threads. The study begins by creating a multiscale finite element simulation for the composite under a low-velocity impact, which operates across three scales: microscale, mesoscale, and macroscale. This simulation accepts various inputs, such as different layer configurations and orientations, and provides impact outputs including maximum load and energy absorption capacity and displacement at failure.

Python and MATLAB scripts …

Mission-Driven Inverse-Design Of Conventional And Unconventional Airplane Configurations Using Machine Learning, Rohan Srinivas Sharma

Doctoral Dissertations

"A key challenge in airplane design has been the long-desired ability to quickly create an airplane design with specific performance properties. To tackle this problem, researchers have traditionally leveraged design space exploration methodologies to iteratively explore a design space via surrogate models. On the other hand, inverse design is a process wherein performance objectives are fixed while a suitable design for satisfying these requirements is calculated. In recent years, artificial neural networks (ANNs) have been explored as viable surrogate models because traditional surrogate models struggle with the large number of output to input mapping needed for inverse design problems. In …

Autonomous Strike Uavs In Support Of Homeland Security Missions: Challenges And Preliminary Solutions, Meshari Aljohani, Ravi Mukkamala, Stephan Olariu

Computer Science Faculty Publications

Unmanned Aerial Vehicles (UAVs) are becoming crucial tools in modern homeland security applications, primarily because of their cost-effectiveness, risk reduction, and ability to perform a wider range of activities. This study focuses on the use of autonomous UAVs to conduct, as part of homeland security applications, strike missions against high-value terrorist targets. Owing to developments in ledger technology, smart contracts, and machine learning, activities formerly carried out by professionals or remotely flown UAVs are now feasible. Our study provides the first in-depth analysis of the challenges and preliminary solutions for the successful implementation of an autonomous UAV mission. Specifically, we …

Accelerating Machine Learning Inference For Satellite Component Feature Extraction Using Fpgas., Andrew Ekblad

Theses and Dissertations

Running computer vision algorithms requires complex devices with lots of computing power, these types of devices are not well suited for space deployment. The harsh radiation environment and limited power budgets have hindered the ability of running advanced computer vision algorithms in space. This problem makes running an on-orbit servicing detection algorithm very difficult. This work proposes using a low powered FPGA to accelerate the computer vision algorithms that enable satellite component feature extraction. This work uses AMD/Xilinx’s Zynq SoC and DPU IP to run model inference. Experiments in this work centered around improving model post processing by creating implementations …

Using Machine Learning To Predict Hypervelocity Fragment Propagation Of Space Debris Collisions, Katharine Larsen, Riccardo Bevilacqua

Student Works

The future of spaceflight is threatened by the increasing amount of space debris, especially in the near-Earth environment. To continue operations, accurate characterization of hypervelocity fragment propagation following collisions and explosions is imperative. While large debris particles can be tracked by current methods, small particles are often missed. This paper presents a method to estimate fragment fly-out properties, such as fragment, velocity, and mass distributions, using machine learning. Previous work was performed on terrestrial data and associated simulations representing space debris collisions. The fragmentation of high-velocity fragmentation can be modeled by terrestrial fragmentation tests, such as static detonations. Recently, stereoscopic …

Faster, Cheaper, And Better Cfd: A Case For Machine Learning To Augment Reynolds-Averaged Navier-Stokes, John Peter Romano Ii

Mechanical & Aerospace Engineering Theses & Dissertations

In recent years, the field of machine learning (ML) has made significant advances, particularly through applying deep learning (DL) algorithms and artificial intelligence (AI). The literature shows several ways that ML may enhance the power of computational fluid dynamics (CFD) to improve its solution accuracy, reduce the needed computational resources and reduce overall simulation cost. ML techniques have also expanded the understanding of underlying flow physics and improved data capture from experimental fluid dynamics.

This dissertation presents an in-depth literature review and discusses ways the field of fluid dynamics has leveraged ML modeling to date. The author selects and describes …

Advanced Ensemble Modeling Method For Space Object State Prediction Accounting For Uncertainty In Atmospheric Density, Smriti Nandan Paul, Richard J. Licata, Piyush M. Mehta

Mechanical and Aerospace Engineering Faculty Research & Creative Works

For objects in the low Earth orbit region, uncertainty in atmospheric density estimation is an important source of orbit prediction error, which is critical for space traffic management activities such as the satellite conjunction analysis. This paper investigates the evolution of orbit error distribution in the presence of atmospheric density uncertainties, which are modeled using probabilistic machine learning techniques. The recently proposed "HASDM-ML," "CHAMP-ML," and "MSIS-UQ" machine learning models for density estimation (Licata and Mehta, 2022b; Licata et al., 2022b) are used in this work. The investigation is convoluted because of the spatial and temporal correlation of the atmospheric density …

A Bidirectional Deep Lstm Machine Learning Method For Flight Delay Modelling And Analysis, Desmond B. Bisandu, Irene Moulitsas

National Training Aircraft Symposium (NTAS)

Flight delays can be prevented by providing a reference point from an accurate prediction model because predicting flight delays is a problem with a specific space. Only a few algorithms consider predicted classes' mutual correlation during flight delay classification or prediction modelling tasks. None of these existing methods works for all scenarios. Therefore, the need to investigate the performance of more models in solving the problem of flight delay is vast and rapidly increasing. This paper presents the development and evaluation of LSTM and BiLSTM models by comparing them for a flight delay prediction. The LSTM does the feature extraction …

Patch-Wise Training With Convolutional Neural Networks To Synthetically Upscale Cfd Simulations, John P. Romano, Alec C. Brodeur, Oktay Baysal

Mechanical & Aerospace Engineering Faculty Publications

This paper expands the authors’ prior work[1], which focuses on developing a convolutional neural network (CNN) model capable of mapping time-averaged, unsteady Reynold’s-averaged Navier-Stokes (URANS) simulations to higher resolution results informed by time-averaged detached eddy simulations (DES). The authors present improvements over the prior CNN autoencoder model that result from hyperparameter optimization, increased data set augmentation through the adoption of a patch-wise training approach, and the predictions of primitive variables rather than vorticity magnitude. The training of the CNN model developed in this study uses the same URANS and DES simulations of a transonic flow around several NACA 4-digit airfoils …

Artificial Intelligence-Enabled Exploratory Cyber-Physical Safety Analyzer Framework For Civilian Urban Air Mobility, Md. Shirajum Munir, Sumit Howlader Dipro, Kamrul Hasan, Tariqul Islam, Sachin Shetty

VMASC Publications

Urban air mobility (UAM) has become a potential candidate for civilization for serving smart citizens, such as through delivery, surveillance, and air taxis. However, safety concerns have grown since commercial UAM uses a publicly available communication infrastructure that enhances the risk of jamming and spoofing attacks to steal or crash crafts in UAM. To protect commercial UAM from cyberattacks and theft, this work proposes an artificial intelligence (AI)-enabled exploratory cyber-physical safety analyzer framework. The proposed framework devises supervised learning-based AI schemes such as decision tree, random forests, logistic regression, K-nearest neighbors (KNN), and long short-term memory (LSTM) for predicting and …