Aerospace Engineering Commons^™

Design And Implementation Of An Embedded Control System For The Cal Poly Spacecraft Attitude Dynamics Simulator, Neil Mahesh Bedagkar

Master's Theses

This thesis presents the development of a cascaded reaction wheel control system for Cal Poly's Spacecraft Attitude Dynamics Simulator. This work considers system architecture, empirical modeling, high-fidelity simulation, embedded firmware, hardware integration, and experimental characterization. In discrete-time simulation, it is shown that nonlinear direct model reference adaptive control (NDMRAC) enables a nonlinear, partially known plant with realistic actuator dynamics to track the response of a canonical second-order transfer function, with settling time within 4.67% and percent overshoot within order of magnitude of the second-order response. In hardware, the feasibility of a cascaded reaction wheel control architecture is experimentally demonstrated, achieving …

Instrumentation And Control Of A Novel Device To Simulate A Hypersonic Environment, Andrew Marcello

Doctoral Dissertations and Master's Theses

The hypersonic flow regime poses several challenges regarding the design of hypersonic vehicles. Among them is the massive energy and economic expense associated with ground- testing evaluation of material responses within this extreme environment. In order to provide a low-cost, rapid option for preliminary material analysis within hypersonic applications, a novel device is under production to replicate this environment on the surface of these materials. This device has been designed to work in conjunction with Argonne National Laboratory (ANL) Advanced Photo Source (APS) synchrotron, to allow for in-situ characterization of ablation and oxidation on the sample surface.

To achieve this, …

Modeling And Autonomous Control Systems For A Delivery Drone Application, Dana Helal Alnuaimi

Theses

This thesis focuses on the development of a multi-drone navigation and control system, aiming to enhance payload capacities beyond the limits of single-drone systems. By integrating multiple drones to work collaboratively as a unit, this study addresses the challenges associated with lifting and transporting heavier payloads.

The primary objective is to design and evaluate a multi-drone system capable of working in tandem to transport larger payloads efficiently. The research aims to develop robust control algorithms, supported by system identification for dynamic modeling, and navigation strategies to enable effective coordination between drones.

The study employs a combination of simulation and real-world …

The E-Strip® As A Tool For Predictive Maintenance To Monitor And Control Shot Peening Processes, Walter A. Beach, Scott Glasier

15th International Conference on Shot Peening

The primary objective of this paper is to demonstrate the E-Strip® is capable of providing real-time feedback to the machine controller for making necessary process adjustments due to external forces, such as machine wear. Adjustments may include regulating air pressure and shot flow within pre-defined tolerances dictated by specification. It is anticipated that this integrated approach will significantly reduce variations in intensity levels observed from part to part and lot to lot.

An Advanced Hexacopter For Autonomous Exploration Of Mars: Attitude Control And Navigation Strategies, Laura Sopegno

Electronic Theses and Dissertations

Mars exploration has recently witnessed major interest within the scientific community. Unmanned robotic platforms offer reliable solutions to acquire and collect data and information from the Red Planet. Particularly, rovers, landers, and orbiters have significantly shaped planetary exploration on the Moon and Mars, contributing significantly to past missions while also highlighting limitations in their capacity to cover diverse terrains over wide ranges. Given current advances in Unmanned Aircraft Systems (UASs), Unmanned Aerial Vehicles (UAVs) offer promising alternatives for future scientific missions.

It is argued that hexacopters, with their relatively compact design and redundancy, present a promising …

Attitude Determination & Control Algorithms, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Purpose

• Quick-look overview of all elements of ADCS (e.g. this control loop)
• Give references and terminology but not the complete "how-to"

Robust Spacecraft Autonomy For Deep Space Exploration In Special Euclidean Group Se(3), Matthew Wittal

Doctoral Dissertations and Master's Theses

Over the past half-century, humanity has gained extensive experience conducting manned spaceflight near Earth. Arguably, "near Earth" could even include the Moon — the most distant destination humans have reached. However, "near" in this work primarily refers low Earth orbit (LEO). One could argue that we have not truly left Earth since the Apollo, as spacecraft in some LEOs remain subject to atmospheric drag thus emphasizing their continued connection to Earth's immediate environment. Reflecting on this, it becomes clear that humanity has largely remained bound to Earth’s immediate vicinity since the Apollo missions reached the Moon. However, that is set …

High-Speed Aircraft Stability And Control Metrics, Timothy T. Takahashi, Jack A. Griffin, Ramana Grandhi

Faculty Publications

This review paper identifies key stability and control screening parameters needed to design low-risk, general-purpose high-speed aircraft. These derive from MIL-STD-8785C, MIL-STD-1797, and older AGARD reports, and are suitable for assessing conceptual high-speed vehicles. We demonstrate their applicability using published ground test, computation, and flight test data from the Bell X-2, North American X-15, Martin X-24A, Northrop HL-10, Lockheed Blackbird (YF-12/SR-71), and North American XB-70 as well as the Rockwell Space Shuttle Orbiter. The relative success of the X-15 and Blackbird and the performance limitations of the others indicate the need to scrutinize lateral-directional stability at the preliminary design phase. …

Sliding Mode Control With Chattering Reduction, Suryamshu Ramesh

Doctoral Dissertations and Master's Theses

Sliding Mode Control is a powerful nonlinear control methodology that can handle parametric uncertainties and external disturbances. However, the discontinuous and high-frequency switching nature of the control law introduces the chattering phenomenon, which leads to potential actuator degradation, alterations to the desired response characteristics and, sometimes, instability during control implementation. The main objective of this thesis is to study Sliding Mode Control with chattering reduction. The Sliding Mode Control law involves an equivalent control component and a discontinuous control component. A disturbance estimation is performed based on Lyapunov analysis and adaptive control techniques and then included in the control law …

Oxider To Fuel Ratio Shift Compensation Via Vortex Strength Control In Hybrid Rocket Motors, Max W. Francom

All Graduate Theses and Dissertations, Fall 2023 to Present

Hybrid motors have existed as a hypothetical propulsion system for decades in a wide range of upper stage rocket motors due to their simple, robust, non-toxic, and versatile nature. However, inherent to hybrids is Oxidizer to Fuel ratio (O/F) shift over time, which results in performance losses for the majority of the rocket’s lifetime. The purpose of this study is to develop a hybrid rocket motor capable of manipulating O/F at will, resulting in an engine which eliminates the undesirable effects of O/F shift. By developing and refining a numerical simulation, a novel injector system, and an open-loop control scheme, …

Development, Modeling, Identification, And Control Of Tilt-Rotor Evtol Aircraft, Clayton T. Spencer

All Graduate Theses and Dissertations, Fall 2023 to Present

This thesis includes the development, modeling, identification, and control of an electric-Vertical-Take-Off-and-Landing (eVTOL) aircraft with tiltable rotors. The front two rotors have tilting capability for transition flight from vertical-take-off to forward-level flight. This work details the development of an eVTOL aircraft and the selection of sub components such as electric motors, batteries, and controllers. After the aircraft build, mathematical model is derived to describe the motion of the aircraft. Unknown parameters in the mathematical model are identified using a Least-Squares-regression (LSR) method that can handle parameter constraints. This is done using real flight data collected from the aircraft. Lastly, this …

Deep Learning System Identification, Linearization And Control Of Dynamical Systems Utilizing Koopman Theory With Applications In Orbital Systems, George Mario Nehma

Theses and Dissertations

The computational and complexity burden of current linearization techniques is one that is a hinderance in the application of real world guidance, navigation and control systems. With the advancements in Deep Neural Networks, large data handling and Koopman Theory, the possibility of global linearizations of nonlinear systems is more prominent. This work demonstrates the capability of a Deep Neural Network learned Koopman operator to transform a nonlinear system into a Linear Time-Invariant system. The method presented is applied to both two purely dynamical systems and one controlled system to emphasize the ability for the technique to be applied in all …

Adaptive Control Of Vscmgs For Satellite Attitude Tracking, Kyle Vernyi

Doctoral Dissertations and Master's Theses

The democratization of space has brought about many new opportunities and challenges for industry, academia, and governments. Smaller and more affordable platforms are now regularly being launched. These platforms have higher uncertainty due to cost, engineering constraints, unmodeled dynamics, coupled effects, and the challenging space environment. In addition, both mission requirements and complexity are simultaneously being increased. In order to achieve these requirements, new satellite control algorithms are required. Adaptive control offers a strong solution to the uncertainty problem. This thesis develops several adaptive control algorithms for satellites equipped with momentum management devices. Momentum management devices such as reaction wheels …

Autonomous Attitude Consensus For Nanosatellite Formations In Leo, Laird J. Mendelson

Master's Theses

Consensus strategies are examined as a possible approach to achieving attitude alignment for a large, close-proximity formation of nanosatellites in low earth orbit (LEO). An attitude-only distributed consensus approach is selected for further consideration due to its comparatively low data transmission requirements. The convergence of a connected network of satellites to the attitude agreement subspace under this control law is shown using a Lyapunov stability approach with a set of idealizing assumptions. A moderate-fidelity simulation demonstrates the performance of the control law under realistic conditions that violate those assumptions. Particular emphasis is placed on the conditions that arise from the …

Missile Modeling And Simulation Of Nominal And Abnormal Scenarios Resulting From External Damage, James Manuel Floyd Iii

Graduate Theses, Dissertations, and Problem Reports (ETD)

This thesis presents the development of a six-degree-of-freedom flight simulation environment for missiles and the application thereof to investigate the flight performance of missiles when exposed to external damage. The simulation environment was designed to provide a realistic representation of missile flight dynamics including aerodynamic effects, flight control systems, and self-guidance. The simulation environment was designed to be modular, expandable, and include realistic models of external damage to the missile body obtained by adversarial counteraction.

The primary objective of this research was to examine missile flight performance when subjected to unspecified external damage, including changes in trajectory, stability, and controllability, …

Fixed Wing Aircraft Collision Avoidance Using Collision Cone Theory, Andrew T. Iii Beary

Mechanical and Aerospace Engineering Theses - Archive

This thesis develops the guidance and control components of an aircraft collision avoidance system, using a collision cone-based approach. These guidance and control laws are developed by considering the nonlinear relative kinematic equations of the aircraft that are on a collision course, as well as the nonlinear flight dynamics of the aircraft performing the collision avoidance maneuver. The longitudinal and lateral-directional axes of the aircraft are considered separately. The developed guidance and control laws are subsequently integrated with the nonlinear aircraft dynamics in a MATLAB/Simulink framework, and simulations performed to demonstrate the working of the overall system.

Dynamic Maneuvers For Satellite On-Orbit Servicing Utilizing Novel Continuum Robotics: Development & Experimentation, Nathan Dalton

Masters Theses

Robotic on-orbit servicing is a developing technology that seeks to increase the longevity and repairability of faulty or aging resident space objects. In this research, the development of a flexible continuum manipulator for a small satellite system that performs low-complexity on-orbit servicing or debris removal is presented. Derivations of manipulator kinematics are described in detail, a non-linear control scheme has been developed, and the accuracy and servicing applications for the prototype are evaluated and discussed. The manipulator has been tested on an air-bearing dynamics simulator, and the results are extensively analyzed. System recommendations and future work suggestions are presented.

Vertical Take-Off And Landing Control Via Dual-Quaternions And Sliding Mode, Joshua Sonderegger

Doctoral Dissertations and Master's Theses

The landing and reusability of space vehicles is one of the driving forces into renewed interest in space utilization. For missions to planetary surfaces, this soft landing has been most commonly accomplished with parachutes. However, in spite of their simplicity, they are susceptible to parachute drift. This parachute drift makes it very difficult to predict where the vehicle will land, especially in a dense and windy atmosphere such as Earth. Instead, recent focus has been put into developing a powered landing through gimbaled thrust. This gimbaled thrust output is dependent on robust path planning and controls algorithms. Being able to …

Stochastic Model Predictive Control Via Fixed Structure Policies, Elias Wilson

Doctoral Dissertations and Master's Theses

In this work, the model predictive control problem is extended to include not only open-loop control sequences but also state-feedback control laws by directly optimizing parameters of a control policy. Additionally, continuous cost functions are developed to allow training of the control policy in making discrete decisions, which is typically done with model-free learning algorithms. This general control policy encompasses a wide class of functions and allows the optimization to occur both online and offline while adding robustness to unmodelled dynamics and outside disturbances. General formulations regarding nonlinear discrete-time dynamics and abstract cost functions are formed for both deterministic and …

Formation Control With Collision Avoidance For Fixed-Wing Unmanned Air Vehicles With Speed Constraints, Christopher Heintz

Theses and Dissertations--Mechanical and Aerospace Engineering

Advances in the miniaturization of powerful electronic components and motors, the democratization of global navigation satellite systems (GNSS), and improvements in the performance, safety, and cost in lithium batteries has led to the proliferation of small and relatively inexpensive unmanned aerial vehicles (UAVs). Many of these UAVs are of the multi-rotor design, however, fixed-wing designs are often more efficient than rotary-wing aircraft, leading to a reduction in the power required for a UAV of a given mass to stay airborne. Autonomous cooperation between multiple UAVs would enable them to complete objectives that would be difficult or impossible for a single …

Theoretical And Experimental Application Of Neural Networks In Spaceflight Control Systems, Pavel Galchenko

Doctoral Dissertations

“Spaceflight systems can enable advanced mission concepts that can help expand our understanding of the universe. To achieve the objectives of these missions, spaceflight systems typically leverage guidance and control systems to maintain some desired path and/or orientation of their scientific instrumentation. A deep understanding of the natural dynamics of the environment in which these spaceflight systems operate is required to design control systems capable of achieving the desired scientific objectives. However, mitigating strategies are critically important when these dynamics are unknown or poorly understood and/or modelled. This research introduces two neural network methodologies to control the translation and rotation …

Analyzing And Improving Calculation And Tuning Process For A Uav, Laurel Wardell

Williams Honors College, Honors Research Projects

The nature of this project is confidential and cannot be disclosed in detail. Generally, this project deals with the analysis of a control system of a UAV with several electric motors and gimbals. The goal of this analysis is to improve control calculations for increased stability. In addition, development has been started on an application to streamline the tuning of gains for this particular controller, allowing for more efficient use of precious flight time.

Constrained Motion Analysis And Control Of Spacecraft Asteroid Hovering With Formulation Extension In Geometric Mechanics Framework, Wesley Thomas Stackhouse

Doctoral Dissertations and Master's Theses

This thesis studies the constrained motion for a spacecraft hovering over an asteroid, where the Udwadia-Kalaba (UK) formulation is applied for nominal control, and an adaptive controller is developed to account for unknowns in the dynamics. Then, the formulation is extended in the geometric mechanics framework to account for rigid body spacecraft asteroid hovering. Constraints are developed and applied for fully constrained and under-constrained asteroid hovering. The fully constrained solutions provided by the UK fundamental equation are compared to an optimal linear quadratic regulator. An adaptive controller is designed using the UK fundamental equation as a basis in the form …

Dynamic And Control Of Air-Bearing Spacecraft Simulator, Jacob Joseph Korczyk

Doctoral Dissertations and Master's Theses

An air bearing is being designed as a spacecraft rotational motion simulator, featuring the Sawyer Robot and its control box. The objective is to maneuver the robot as desired, performing operations specific to on-orbit servicing operations while maintaining stability of the system. Before the control can be designed, the dynamics of the platform and the robot must be modeled. The dynamics of the robot can be derived utilizing a Newton-Euler recursive approach. By beginning with a simple pendulum, then adding links (degrees of freedom) to more closely resemble the Sawyer arm, the equations of motion for the robot can be …

An Analytic Study Of Pursuit Strategies, Mark E. Vlassakis

Theses and Dissertations

The Two-on-One pursuit-evasion differential game is revisited where the holonomic players have equal speed, and the two pursuers are endowed with a circular capture range ℓ > 0. Then, the case where the pursuers' capture ranges are unequal, ℓ₁ > ℓ₂ ≥ 0, is analyzed. In both cases, the state space region where capture is guaranteed is delineated and the optimal feedback strategies are synthesized. Next, pure pursuit is considered whereupon the terminal separation between a pursuer and an equal-speed evader less than the pursuer's capture range ℓ > 0. The case with two pursuers employing pure pursuit is considered, and …

Control And Stability Of Upper Stage Launch Vehicle With Hybrid Arc-Ignition Attitude Control System, Steven Russell Bennett

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Utah State University Propulsion Research Laboratory (USUPRL) has recently made significant developments in the area of hybrid rocket systems. This type of propulsion system incorporates a solid fuel and a gas or liquid oxidizer. Hybrid rocket systems are known for their inherent safety, reliability, and restart capability. Over the last several years, the USUPRL has successfully built and tested a hybrid rocket system comprising acrylonitrile butadiene styrene (ABS) plastic and gaseous oxygen (GOX). The system was demonstrated to be fully functional during ground, vacuum, and sub-orbital flight testing. Continuing forward, the USUPRL endeavors to extend the capabilities of this …

Quadrotor Swarm Arena (Quasar) Development Of A Swarm Control Testbed, Shane T. Stebler, William Mackunis

Beyond: Undergraduate Research Journal

Swarm control systems are increasingly popular in the robotics industry and academia due to their many potential applications. The goal of the Quadrotor Swarm Arena (QuaSAr) project is to construct a quadrotor swarm control testbed to provide researchers with the tools needed to experimentally investigate this emerging science. This testbed is equipped with a motion capture system, test control station, and numerous quadrotor UAVs. MATLAB-Simulink is utilized for control law development, data processing, and test control. This configuration allows researchers to test developing control law in a 'plug and play' manner as control development and test control are all completed …

Design And Performance Estimation Of A Low-Reynolds Number Unmanned Aircraft System, Sean Lauderdale King

LSU Master's Theses

The purpose of this thesis is to conceptually design a fixed-wing unmanned aircraft systems (UAS) with a higher flight-time and top stable speed than comparable systems. The vehicle adheres to specifications derived from the client, the market, and the Federal Aviation Administration (FAA). To broadly meet these requirements, the vehicle must fly for a minimum of three hours, return to the original flight path quickly if perturbed, and must be hand-launched. The vehicle designed must also have a large potential center of gravity movement to allow for customization of the planform and client customization.

An iterative design process was used …

Linear And Nonlinear Adaptive Attitude Control Of Asteroid-Orbiting Spacecraft Using State Feedback And Output Feedback, Nicholas Moya

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis presents the derivation of both a linear and nonlinear adaptive control law for the attitude states of a spacecraft in orbit around rotating asteroids. The asteroid is assumed to be irregularly shaped and in an elliptical orbit around the sun. The linearized, time-varying spacecraft model will assume to include unknown parameters and will have external disturbances present. The objective is to control the roll, pitch, and yaw angle trajectories of the spacecraft such that they track desired reference trajectories. To achieve this, the control law will be composed of (1) a feedback controller, sufficiently robust to disturbance such …

Learn-To-Fly Control System Design, Alexander Brent Streit

Electrical & Computer Engineering Theses & Dissertations

In order to improve aircraft flight control system development life cycle, new flight control techniques are being explored to allow the system to ``learn-to-fly" with limited a priori information of the aircraft's aerodynamic characteristics. One approach is to have a system identification process operating on-the-fly to generate mathematical models which can be used to update control laws. In this thesis, a wind tunnel experiment was conducted with a model aircraft set up to be free-to-roll, so system identification and control methods could be explored for a one-degree-of-freedom case. In particular this thesis covers the design of a novel control system …