Aerospace Engineering Commons^™

Design And Development Of A Resonance Ignition System Using Gaseous Propellants, Benjamin J. Hoefer

Master's Theses

This work presents the development and experimental evaluation of a resonance igniter (RI) operating with premixed gaseous propellants. Resonance ignition is a non-electrical ignition concept in which an underexpanded jet impinges on a closed-end Hartmann–Sprenger tube (HST), generating cyclic compression and expansion waves that rapidly heat gas near the tube endwall. A modular experimental system was designed and built to investigate resonance ignition using methane–air and methane–oxygen mixtures. The system includes a supplemental configuration that may probe for mixture conditions favorable to ignition, informing RI testing. Pressure and temperature measurements were used to characterize pressure control, mixture pressure ratio (MPR), …

Thermoacoustic Effects Of A Variable Equivalence Ratio In A Single Element Methane Combustor, Carter Green

Doctoral Dissertations and Master's Theses

Combustion instability is one of the leading factors in limiting the progress and innovations of liquid rocket engines and power plants. Under certain operating conditions, unsteady heat release and acoustic wave interactions can couple and lead to instabilities, such as self-sustaining pressure oscillations, that can lead to reduced combustor performance and potentially hardware damage. In this project, the thermoacoustic effects of controlling the equivalence ratio of a single-element natural gas combustor were modeled and analyzed. The project used Fidelity Pointwise for meshing, ANSYS Fluent for modeling, ERAU VEGA HPC for computing, and MATLAB for acoustic analysis. A numerical model of …

Development And Integration Of A Liquid Rocket Propulsion System For A High-Power Rocket, Matthew A. Dipofi, Christina Griggy, Jonathan Armbrust, Jackson Frame

Williams Honors College, Honors Research Projects

The goal of this project is to integrate the Stinger liquid rocket engine, a regeneratively cooled LOX/ethanol engine developed by the Akronauts Rocket Design Team, into the Copperhead launch vehicle. The objective is to design, build, and test a complete propulsion system including electronics, software, pressurization, tanks, and instrumentation capable of flight. A key innovation is the electronic pressure regulation system, which replaces mechanical regulators with servo-actuated valves running PID loops for precision and an extra degree of control.

The Stinger engine, under development since Fall 2023, has undergone nine hot-fire tests, with further testing planned to qualify the new …

Electronic Propulsion Engines: Revolutionizing Space Travel, Isaiah Echeverria

Undergraduate Honors Theses

Most spacecrafts rely on chemical propulsion to generate thrust and venture into the depths of outer space. They rely on principles from Newton’s three laws of motion, conservation of momentum-energy, and atomic physics. However, an electronic form of propulsion also exists providing spacecrafts an alternative opposed to the sole use of chemical energy. Electronic propulsion systems or engines last longer than current chemical spacecraft engines and are improving to produce greater amount of thrusts.

Comparing the two types of spacecraft engines shows the benefits and disadvantaged obtained by using either option as well as the main differences and similarities shared …

Sunrise Propulsion Subsystem Leak Rate Measurement Methodology, Alex Kirkman, Brittany Woytko, Holly Walen, Bret Maughan

Space Dynamics Laboratory Publications

As part of the integration and testing for Sun Radio Interferometer Space Experiment (SunRISE), it was necessary to characterize the propellent leak rate of the fully assembled propulsion subsystem for each satellite to ensure compliance with performance requirements. SunRISE utilized a cold gas system for its propulsion subsystem, using R-236fa propellant inside a tank made from a monolithic 3D printed SLA material. It was not possible to accurately characterize the propellent leak rate via weight by measuring the mass loss from the tank. This is due to the SLA material having both a high absorbance rate of water in normal …

Development And Testing Of An 8-Bit Digitally Throttled Hybrid Rocket Motor, Trevor W. Coombs

All Graduate Theses and Dissertations, Fall 2023 to Present

Hybrid rocket motors that use a solid fuel grain and liquid oxidizer are low-cost and safer alternatives to traditional rocket motors. Another benefit of hybrid rocket motors is that during a burn, the amount of oxidizer into the combustion chamber can be changed, this capability is called throttling. To take advantage of the throttling ability of hybrid rocket motors, a throttling valve made up of 8 individually controlled valves is designed, developed, and tested, which is documented in this thesis. The results of the testing campaign show that the 8-bit digital throttling valve technology is an effective throttling technology and …

Uav To Carry Heavy Loads, Jacob Cannon, Robert Connor Downs, Anthony Orlando

Williams Honors College, Honors Research Projects

Our senior design project aims to develop an innovative Unmanned Aerial Vehicle (UAV) capable of carrying heavy payloads up to 50 lbs. This UAV will address the growing demand for efficient and autonomous cargo transportation, unlocking new possibilities in logistics and remote deliveries. The primary goal is to design, build, and test a robust UAV platform equipped with advanced propulsion systems, stabilizing mechanisms, and a secure payload attachment system. The heavy-lift UAV will be capable of transporting payloads in challenging environments, enhancing its versatility for various industries, including emergency response, disaster relief, and commercial logistics. For the extent of this …

Selection Of Materials For A Nuclear Rocket Engine, Marcos Fernandez-Tous

AI Assignment Library

Selection of materials which will be used in the construct of a nuclear reactor for a space rocket.

Spacecraft Systems & Navigation, Christopher Vanacore

Student Works

This textbook is steered towards higher educational course entailed in Commercial Space Operations. This textbook will be covering in detail Orbital Satellites, and Spacecraft. These topics are discussed according to their application, design, and environment. The power system, shielding and communication systems are reviewed along with their missions, space, environment and limitations. Any vehicle, whether manned or unmanned, intended for space travel is a spacecraft. A spacecraft's required systems and equipment depend on the information it will acquire and the tasks it will perform. Although their levels of sophistication vary widely, they re all subject to the harsh conditions of …

Fabrication And Testing Of Catalyst-Infused Filament For 3d Printing Of Ignition-Augmented Hybrid Rocket Fuels, Kurt C. Olsen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis describes and addresses the need for reliable ignition in small satellite hybrid propulsion systems using higher density oxidizers. It describes methods of creating custom 3D printing ABS plastic based filaments that contain small amounts of catalysts. These catalysts lead to a more reliable and energy-efficient ignition of a hybrid rocked propulsion system using catalyst-infused ABS and nitrous oxide and oxygen blend called Nytrox, commonly known as ”laughing gas.” The ”laughing gas” has a higher density and can therefore provide more ”miles per gallon” in a hybrid propulsion system on a small satellite when compared to gaseous oxygen (GOX). …

Static Testing Of Hybrid Rocket Engine Using Biomass Waste, Saleh Mohammed Musaed Badi

Theses

This work investigates experimentally for the first time the performance of two solid biomass wastes as propellants for a Hybrid Rocket Motor based on the combustion and propulsion parameters such as combustion chamber pressure, thrust force, chamber temperature, combustion characteristics, and flame length generated. The main objective of this study is to examine the performance of the proposed biomass fuels (Date stone powder and Jojoba waste powder) in comparison with typical hydrocarbon fuels. To make an accurate comparison, Paraffin Wax-based propellant was used in this study as a reference fuel to compare with biomass performance using the same testing facility …

Design And Optimization Of An Electron Cyclotron Resonance Thruster, Austen Thomas

Masters Theses

Presented in this work is the process in the design and optimization of a coaxial electron cyclotron resonance thruster. Electron cyclotron resonance thrusters are novel microwave-based thrusters which possess select technological advantages over mature electric propulsion concepts such as being electrodeless and only requiring a single power source. The thruster constructed in this work is a coaxial configuration and is termed the Western electron cyclotron resonance thruster. Thruster dimensions were optimized based on past experimentation completed with ECR thrusters. In an attempt to enhance the microwave plasma coupling of the coaxial thruster design three different antenna configurations were considered: a …

Analysis Of Nozzle Expansion Characteristics In Supersonic Retro-Propulsion, Gonzalo Montoya

Honors Undergraduate Theses

Supersonic retro-propulsion (SRP) is defined as rocket propulsion used to decelerate aerospace vehicles at supersonic speed. SRP is often used as a method of high-speed deceleration on space vehicles. The main method of propulsion used in the application of SRP is rocket propulsion. Rocket engine thrust and performance changes with altitude and expansion ratio. Changing altitudes across the trajectory of a rocket affect how the exhaust plume shock waves expand. Being able to identify how different expansion ratios affect the exhaust plume flow fields would provide useful data on how SRP performance can be predicted. This research projects aims at …

The Utilization And Loss Of Available Energy In Aerospace Systems, Mohammad Abbas

Doctoral Dissertations

“Theoretical principles and analytical methodology for the control volume-based energy availability methodology for aerospace vehicles are developed; applications are made to jet-propelled and rocket-propelled vehicles as well as to stand-alone engine systems. Energy availability utilization characteristics of a modeled turbojet engine are studied across a wide range of operating conditions of throttle setting, flight altitude, and flight Mach number. The method is also extended to consider jet-powered vehicles. Fundamental principles regarding entropy generation and energy availability are developed, including directly linking entropy generation and maximum range and endurance of a powered aircraft. Theory and application of the energy utilization methodology …

Analysis Of Energy Utilization And Losses For Jet-Propelled Vehicles, Mohammad Abbas, David W. Riggins

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The global control volume-based energy utilization balance for an aerospace vehicle is extended to allow for the analysis of jet-propelled vehicles. The methodology is first developed for analyzing the energy utilization and entropy generation characteristics of jet engines without airframe considerations. This methodology, when combined with separate energy utilization analysis for an unpowered airframe, allows for the assessment of a powered vehicle. Wake entropy generation for a powered vehicle is shown to be the summation of the wake entropy generation associated with the propulsion system (no airframe) and the unpowered airframe. The fundamental relationship between overall entropy generation and the …

Experimental Study Of A Liquid Fuel Bluff Body Flame At Elevated Pressures, Karam Paul

Honors Undergraduate Theses

The purpose of this research was to operate a bluff body flame holder with the objective of stabilizing a flame at elevated pressures over a range of equivalence ratios. The ability to have a ground-based test rig capable of maintaining stable flames at high pressures and temperatures is critical in understanding flames present in modern jet engines and gas turbine technologies. The facility was reconfigured multiple times and the resultant flame was imaged within the optical test section. A converging nozzle was utilized to choke the flow and vary the operating pressures up to 5 atm. By regulating mass flow …

Liquid Rocket Engine And Test System, Ronnie Wallingford, Grace Ann Phillips, Blake Bowser, Jack Dalton

Williams Honors College, Honors Research Projects

The goal of this project is to design the University of Akron’s first design team built liquid propulsion rocket engine and testing system. The creation of this engine and testing system will create new opportunities for the Akronauts Rocket Design Team moving forward, allowing the team to enter more prestigious competitions, and will also enable students to better pursue opportunities in the space and defense industry by exposing them to more relevant industry experiences.

The liquid rocket engine designed by the team will utilize ethanol and liquid nitrous oxide to generate approximately 500 lbf of thrust. An accompanying test system …

Zenith Propulsion, Bryce Smoldon, Matthew Boban, Maxwell Kauker, Jonathan Noble, Stefan Johnson, Andrew Lucka, Nicholas Wright

Undergraduate Student Works

Launch Vehicle Design for the FAR-Mars Competition The Zenith Propulsion team took on the challenge put forth by the Friends of Amateur Rocketry (FAR), to build and launch a rocket propelled by a liquid rocket engine. In 2018-2019, a capstone team called Tiber Designs successfully designed and tested a 1,000 lbf-thrust rocket engine, named Janus, that uses liquid oxygen and jet-A (aviationgrade kerosene) as propellants. Zenith Propulsion would design a vehicle – 21 ft long, 6 in diameter, 170 lbm loaded – that uses the Janus rocket engine to fly to a target altitude of 30,000 ft above ground level. …

Development Of A Cold Gas Propulsion System For A 1u Cube Satellite, Norma Alicia Perea

Open Access Theses & Dissertations

In efforts to further the development test capabilities of nanosatellites on earth, NASA White Sands Test Facility (WSTF) is developing a Magnetic Levitation Table (MLT) for ground testing of nanosatellites. Testing of the table requires dedicated test articles that employ space-like systems, but those that can be used in the confines of a small lab testing area. In collaboration with WSTF, the University of Texas at El Paso (UTEP) Center for Aerospace Exploration Technology Research (cSETR) is developing an 1U cold gas propulsion cube-satellite demonstrator (CGD) to test capabilities of the levitation table. A 1U cube satellite was designed with …

Experimental Investigation Of Ionic Liquid Mixtures For Electrospray Propulsion, Mitchell J. Wainwright

Doctoral Dissertations

"In recent years, there has been a dramatic increase in the number of small satellites (namely MicroSats, NanoSats, and CubeSats) in earth orbit; many of these are launched without propulsion systems. Multi-mode propulsion systems, capable of operating in either chemical or electric mode, have been proposed as attractive candidates for use in small satellites. Such systems are mass and volume optimal and flexible in terms of thrust requirements. Most previous work on multi-mode systems has focused on chemical mode performance.The work in this dissertation focuses on the electric mode performance of these propulsion systems.

The work in this research is …

Planar Motion Control Of A Cube Satellite Using Cold Gas Thrusters, Christian Lozoya

Open Access Theses & Dissertations

This Thesis presents a mathematical model developed for the computational simulation ofCubeSat movement using four thrusters that permit uniaxial translation and rotation. Arbitrary functions are fit to boundary conditions to simulate the force, acceleration, velocity, and displacement of the CubeSat along a plane. The model is used to derive a motion control algorithm assuming constant pressure and mass. A single model describes both translation and rotation. This Thesis also explores the relationship between propellant consumption and the time required to complete a displacement implied by the model.

Rocket Motor Nozzle, Corey Hillegass

Williams Honors College, Honors Research Projects

For this honors research and senior design project, the authors will research, analyze, and manufacture a rocket motor nozzle for the Akronauts rocket design team. This research and design project will improve how the rocket design team will decide and manufacture nozzles going forward. The impact of this improvement allows the rocket design team to take steps toward being self-sustaining by manufacturing student designed parts as opposed to commercially bought parts. This will not only be successful in increasing student impact on future designs, but also provides a technical challenge for the authors and will present as an impressive feat …

Supersonic Propulsion: Inlet Shock Wave/Boundary Layer Interaction In A Diffuser, Lucas Fulop, Ian Henry, Jordan Ruffner, Anthony Mcmullen

Williams Honors College, Honors Research Projects

Using a finite-volume approach and ANSYS/FLUENT, supersonic flow over a 2-D ramp of varying angles is modeled. The computational results from this model will be used to further explore the design of supersonic diffusers used on military aircraft. Using grid capturing features and inflation layers, shockwave and boundary layer interactions will be observed as well as wave-associated pressure changes in supersonic turbulent flow. The Spalart-Allmaras single-equation model of turbulent flow will be used in all simulations to more accurately represent the phenomena that occur in such high-speed environments. The size of upstream zones and recirculation zones will be obtained through …

Design Principles And Preliminary Testing Of A Micropropulsion Electrospray Thruster Research Platform, Will Alan Mcgehee

Master's Theses

The need for micropropulsion solutions for spacecraft has been steadily increasing as scientific payloads require higher accuracy maneuvers and as the use of small form-factor spacecraft such as CubeSats becomes more common. Of the technologies used for this purpose, electrospray thrusters offer performance that make them an ideal choice. Electrosprays offer high accuracy impulse bits at low power and high efficiency, and have low volume requirements. Design choice reasoning and preliminary testing results are presented for two electrospray thruster designs. The first thruster, named the Demonstration thruster, is operated in atmospheric conditions and serves as a highly visible example of …

A Homegrown Dsmc-Pic Model For Electric Propulsion, Dominic Charles Lunde

Master's Theses

Powering spacecraft with electric propulsion is becoming more common, especially in CubeSat-class satellites. On account of the risk of spacecraft interactions, it is important to have robust analysis and modeling tools of electric propulsion engines, particularly of the plasma plume. The Navier-Stokes equations used in classic continuum computational fluid dynamics do not apply to the rarefied plasma, and therefore another method must be used to model the flow. A good solution is to use the DSMC method, which uses a combination of particle modeling and statistical methods for modeling the simulated molecules. A DSMC simulation known as SINATRA has been …

Project Atlas: A Mobile Universal Rocket Engine Test Stand, Collin Mickels, Conrad H. Wright, Noah Soderquist, Alona Prokofieva, Sattar Panahandehgar, Naveen Sri Uddanti, Alcuin Rajan

Student Works

Project Atlas is a mobile, trailer-mounted, rocket engine test stand developed by Experimental Rocket Propulsion Lab (ERPL) at Embry-Riddle Aeronautical University’s Daytona Beach, Florida campus. The integrated test stand and automated data-acquisition and control system supports ERPL’s multitude of engine research projects, including bipropellant liquid and hybrid rocket engines. The need for an integrated universal mobile test stand stems from the inability to conduct frequent test fires on campus due to Class-3 airspace and liability issues. The test stand is designed as a horizontal thrust structure utilizing a dual flame duct to redirect and cancel reaction forces acting upon the …

Thermal/Mechanical Analysis And Development Of A 2000 Lbf Liquid Oxygen/Liquid Methane Rocket Engine, Marissa Garcia

Open Access Theses & Dissertations

The Center for Space Exploration and Technology Research (cSETR) is developing three rocket engines: a 5 lbf reaction control engine, a 500 lbf engine, and a 2000 lbf engine. All these engines utilize a liquid oxygen and liquid methane propellant combination. The reason methane was selected for the fuel is because methane is easy to store, is self-pressurizing, and readily available. There is also the possibility of creating methane on planets such as Mars through an electrolysis process on the ice water found on Mars.

The 2000 lbf engine, or the CROME-X, is a modular, steady-state pintle injector engine. It …

Small Satellite Earth-To-Moon Direct Transfer Trajectories Using The Cr3bp, Garrett Levi Mcmillan

Masters Theses

"The CubeSat/small satellite field is one of the fastest growing means of space exploration, with applications continuing to expand for component development, communication, and scientific research. This thesis study focuses on establishing suitable small satellite Earth-to-Moon direct-transfer trajectories, providing a baseline understanding of their propulsive demands, determining currently available off-the-shelf propulsive technology capable of meeting these demands, as well as demonstrating the effectiveness of the Circular Restricted Three Body Problem (CR3BP) for preliminary mission design. Using the CR3BP and derived requirements from NASA's Cube Quest Challenge, five different trajectory scenarios were analyzed for their propulsive requirements. Results indicate that the …

Study Of Optical Propulsion Concepts And Techniques For Small-Satellites, Jaykob Neil Maser

Doctoral Dissertations

"The first objective of this research is to manufacture and investigate the characteristics and use of asymmetric, metallic, nanostructures for plasmonic force propulsion, a developing method of nano-/picosatellite thrust generation. This project developed a higher-fidelity model of a recently envisioned small spacecraft propulsion system for precision pointing and proximity control. Plasmonic force propulsion harnesses solar light focused onto plasmon reactive sub-wavelength nanostructures to generate polarized oscillations of electrons on the surface of metallic nanostructures which accelerate and expel nanoparticle propellant via strong optical forces. This research also explores how material selection affects the electromagnetic response of the closely positioned asymmetric …

Performance Modeling And Experimental Investigations Of Rotating Detonation Engines, Andrew Ryan Mizener

Mechanical and Aerospace Engineering Dissertations - Archive

The rotating detonation engine (RDE) is a promising propulsion concept that has the potential to offer increased thermodynamic performance in a compact package with no moving parts. A series of analytical and experimental investigations was carried out on RDEs with the joint goal of investigating swirl, torque, and a range of other design parameters of interest. The model and experimental facility were then applied to related problems with the goal of advancing the understanding of RDE applications. A flexible, low-order, semi-empirical model for a rotating detonation engine was presented. The model was formulated to be able to run broad parametric …