Aerospace Engineering Commons^™

Payload Selection To Correlate Shielding Performance With Molecular Structure And Elemental Composition For Rosisat: The Radiation Orbital Shielding Investigation Satellite, Chase Patterson, Jacob L. Blanton, Kylie Nager

Beyond: Undergraduate Research Journal

Exposure to space weather in the Low Earth Orbit (LEO) environment poses significant challenges to both the integrity and longevity of orbital hardware, as well as the health of astronauts, driving the necessity for improved means of radiation shielding for future missions. With a 1U CubeSat formfactor, ROSISat is a planned LEO mission that aims to characterize the radiation shielding capabilities of seven candidate materials: ultra-high molecular weight polyethylene, boron nitride, carbon nanotubes, boron nitride nanotubes with polyethylene fibers, carbon fiber reinforced composite, and aerographene, as well as two control materials: aluminum 6061 and ep33. By comparing the shielding performance …

Advancing The Oresat Adcs: Design & Implementation Of An Open-Source Reaction Wheel System, Chris Kane-Pardy

Dissertations and Theses

Reaction wheels provide the primary means of precision attitude control for many CubeSat attitude determination and control systems by exchanging angular momentum with the spacecraft body. As the Portland State Aerospace Society's OreSat spacecraft transitioned from a 2U to a 3U configuration, the increased spacecraft inertia reduced the attitude control authority available from the legacy reaction wheel system. This thesis addresses that challenge through the redesign of the reaction wheel system and the development of a deterministic embedded controller and experimental framework for evaluating brushless motor commutation strategies under identical operating conditions.

The redesigned system combines an analytically sized flywheel, …

Large-Scale Cubesat Chassis, Matthew D. Evans, Robert A. Bettinger

AFIT Patents

The present invention relates to large-scale CubeSat chassis and methods of making and using same. The disclosed CubeSat comprises specific structural features that can yield up to at least a 27 U CubeSat that has comparable or even better performance and benefits than that of smaller CubeSats. Such volume increase coupled with the structural integrity of Applicants' CubeSats opens up a wide range of CubeSat performance increases including, but not limited to, larger payloads, more diverse payloads and larger CubeSat fuel capacities. Such increased payload capabilities includes, for example, increased focal length capabilities and such improved maneuverability results in, for …

Sal-E: Responsive Space Pathfinder Mission, Adrian Serniak, Kayla Wong

College of Engineering Summer Undergraduate Research Program

The main objective of the SAL-E mission is to grow the Cal Poly CubeSat Lab’s (PolySat) capabilities in rapid spacecraft design and testing, as well as to provide the current generation of students with the opportunity to design, test, integrate, and communicate with a satellite. This summer we will mainly be focusing on aspects of spacecraft test and integration, as we prepare for our satellite handoff in the Fall. Specifically, we will be conducting satellite assembly, Thermal Vacuum Chamber (TVAC) Testing, Vibrations Testing, and software validation and testing on the flight unit satellite. Students participating in this multidisciplinary SURP will …

Deployable Systems Eat, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

What Are Mechanisms?

• Moving Mechanical Assembly (MMA)

• A device that controls the movement of a deployable or other movable system of a space or launch vehicle

• Why do mechanisms exist?

• 1) Fit within launch vehicle or dispenser
• 2) Stow for launch loads
• 3) Change position or pointing once on orbit
• 4) Deploy objects

Characterizing Heating And Resistance Properties Of Nichrome Burn Wire To Be Used In Cubesat Actuation, Noah Moix

Mechanical Engineering Undergraduate Honors Theses

This thesis investigates the use of Nichrome 60 wire as a burn wire mechanism, commonly utilized in CubeSats and other aerospace engineering applications requiring precise, single-use release systems. The experiment focused on characterizing the thermal and resistive behavior of Nichrome 60 wire under Joule heating conditions. Four wire configurations were tested: 34-gauge and 36-gauge wires, each at lengths of 1 inch and 2 inches. Each configuration was subjected to a constant current until thermal failure occurred. During testing, real-time measurements of electrical resistance and wire temperature were recorded. This data was used to generate resistance vs. temperature profiles for each …

Design And Evaluation Of A Deployment Mechanism For A Space-Based Origami Mirror In Cubesat Missions, Arturo Luna

Theses and Dissertations

The space environment’s suboptimal lighting conditions and eclipse periods impede inspection and on-orbit servicing missions. To abate this problem, the Air Force Institute of Technology (AFIT) launched the Mirror Illumination for Reconnaissance and Rendezvous of Orbital Resident Systems (MIRRORS) initiative. This initiative provides augmented illumination to resident space objects (RSOs) by reflecting the sun’s rays from a mirror satellite. Leveraging origami-inspired designs for compact packaging, AFIT developed a cube origami flasher mirror constructed from aluminum panels that unfolds passively via Nitinol hinges. This research investigates the necessary deployment and panning mechanisms for a dynamic, space-based origami mirror to advance the …

Preliminary Analysis Of A 12u Astronomy Cubesat, Charles Van Steenwyk

Master's Theses

The explosion of exoplanet astronomy has led to thousands of new discoveries and opportunities to be explored. The ability to capture images and perform meaningful science has resulted in an abundance of follow-on missions, surveys, and fostered a community of amateur astronomers in the last ten years. This success mirrors the development of CubeSats, which have proved an immensely popular way for students of all levels to access space and collect data. Multiple CubeSats have been developed to observe and characterize single exoplanet tran- sits, showing that this class of mission is possible. However, there is currently no mission designed …

Cubesat Reaction Wheel Attitude Control Platform System Architecture, Justin Hartland

Beyond: Undergraduate Research Journal

In the classroom, physics behind spacecraft attitude dynamics and controls is abstract and difficult to comprehend. It is common that students struggle to develop the connection between the math they learn and how it can be applied in the real world. The goal of this project is to design and manufacture a 1U, 3U, and 6U CubeSat testbed for autonomous control systems utilizing reaction wheels. The testbed will include three separate reaction wheels each mounted on its own respective axis to control the attitude in 3 degrees of freedom. The end goal of the CubeSat Control Platform is to be …

A Comparative Study Of Vinti-Based Orbit Propagation And Estimation For Cubesats In Very Low Earth Orbits, Ethan Michael Senecal

Mechanical & Aerospace Engineering Theses & Dissertations

In recent years, there has been a growing interest in CubeSats and very low Earth orbit (VLEO) space missions. Mission SeaLion, a collaborative CubeSat mission between Old Dominion University, the U.S. Coast Guard Academy, and U.S. Air Force Institute of Technology, planned to launch a 3U CubeSat into VLEO. The VLEO mission is a particularly challenging environment for navigation and orbit propagation because drag introduces a significant perturbation for orbit models such as SGP4. Additionally, mission requirements left no capacity for attitude determination or control, further reducing knowledge of drag behavior of the satellite in flight. This deficiency is a …

A Systematic Study Into The Design And Utilization Of Burn Wire As A Means Of Tensioning And Releasing Spacecraft Mechanisms Through Applied Joule Heating, Chandler Dye

Mechanical Engineering Undergraduate Honors Theses

The joule heating characteristics of Nichrome burn wires, often used as a thermal cutting device in mechanisms designed to fasten and release CubeSat deployables, are examined in the following thesis. Wires ranging from 0.125 inches to 2 inches long, and diameters of 30 Ga and 40 Ga, are investigated through analytical calculations and thermal simulations based on heat transfer due to joule heating, and through physical circuitry-based experiments. The temperature data is used to generate heating curves to predict the time it takes for Nichrome wires to fail under varying testing parameters. This research aims to catalog a series of …

Sealion Cubesat Mission Architecture Using Model Based Systems Engineering With A Docs As Code Approach, Kevin Yi-Tzu Chiu

Mechanical & Aerospace Engineering Theses & Dissertations

CubeSats are a growing population within the space industry. Every year, universities launch numerous amounts of CubeSats due to their inexpensive cost of development, launch, and deployment. However, this comes with numerous challenges. As the number of university-CubeSats grow, so too do the numbers that fail. With development teams consisting mainly of students with little to no training, proper and yet easy to use tools or methods should be implemented to help ensure mission success. Especially in the critical stages of planning before and during development, a technical approach to quickly track life cycle development of a CubeSat is needed. …

Development Of Mirror Flexures For Use In The Muvi Instrument, Colin W. Harrop

Master's Theses

The Miniaturized Ultraviolet Imager (MUVI), is a compact wide field UV imaging instrument in development at UC Berkeley Space Sciences Laboratory and Cal Poly, San Luis Obispo. MUVI is designed to fit in a 2U CubeSat form factor and provide wide field, high resolution images of the ionosphere at far ultraviolet wavelengths. This thesis details the design and analyses of MUVI’s deployable cover mirror mounting flexures. Three different flexure geometries were evaluated, an optimal candidate was determined based on a number of criteria including isolation of vibration and stress to the mirrors, manufacturability and cost. The design of the flexure …

Performance Analysis And Recommended Improvements Of A Cubesat Resistojet, Alexander M. Petrocelli

Theses and Dissertations

A small resistojet design was evaluated for its current performance and assessed for design and operational improvements. This resistojet is designed to operate on AFIT CubeSats with the intent of providing 100-200 mN of thrust at a specific impulse between 66-104 seconds. Using previously collected data and studies conducted on the design, analysis was performed to determine the current performance of this first-generation design. This provided a starting point for performance analysis over a variety of operational temperatures and pressures. This process was conducted for various heat exchanger path lengths of both the current design and two adapted path geometries. …

Model Based Systems Engineering With A Docs-As-Code Approach For The Sealion Cubesat Project, Kevin Chiu, Sean Marquez, Sharanabasaweshwara Asundi

Mechanical & Aerospace Engineering Faculty Publications

The SeaLion mission architecture team sought to create a model-based systems engineering approach to assist improving CubeSat success rates as well as for the SeaLion CubeSat project to guide an implementation for the flight software. This is important because university CubeSat teams are growing in number but often have untrained students as their core personnel. This was done using a document-as-code, or docs-as-code, approach. With this the team created tools for the systems architecture with the Mach 30 Modeling Language to create an architecture that is easy to learn and use even for newly admitted team members with little to …

Project Management And Systems Engineering Framework For Educational Cubesat Missions, Bailey Garrett

Master's Theses

The rising complexity of CubeSat missions and the unique challenges faced by educational CubeSat programs lead to high rates of mission failure. Implementing project management and systems engineering practices can alleviate these challenges and improve mission success rates for educational CubeSat developers. However, existing project management and systems engineering resources are too cumbersome and often assume the student has a base-level understanding of project management and systems engineering fundamentals. A new universal project management and systems engineering framework was created and tailored specifically to the needs of an educational CubeSat mission. The framework was designed to accommodate first-time CubeSat developers, …

Compact Electrospray Propulsion Systems For Small Form-Factor Satellites: An Orbital Performance Survey & Platform Design, Alberto Meza

Open Access Theses & Dissertations

Over the past decades, small form-factor satellites such as CubeSats have remained as one of the most accessible platforms to reach space for universities, research institutions, private and governmental entities to perform a wide range of missions. This paper presents a survey into the design and implementation of an electrospray rail thruster, to be integrated to the CubeSat platform. The design investigated features propellant tanks for each individual thruster embedded inside the rail of a standard 1U CubeSat. The capabilities of utilizing the electrospray thruster as an attitude & determination control system was also investigated in which, a pointing accuracy …

Uv Space Imager Enclosure Coating, David Silva Cortez, Victor Alexander Rempel Dekhtyar, Maria L. Muñoz

Mechanical Engineering

The goal of this project is to reduce the amount of stray light entering an ultraviolet (UV) imager through absorption. This report outlines the use of ZnO nanoparticles mixed in an epoxy matrix for use in a CubeSat enclosure. Through testing, our team verified that the ZnO and epoxy coating experienced a peak absorption between 360-370 nm. The epoxy mixture with the .75% by weight ZnO nanoparticles absorbed up to 99.9 % of UV light at its peak. The effect on material properties, such as Young’s modulus and ultimate tensile strength, was also tested. Tensile tests demonstrated that adding ZnO …

Orbital Debris Analysis And Orbital Decay Analysis Of Arksat-2, Will Stuff

Mechanical Engineering Undergraduate Honors Theses

ARKSAT-2 is a cube satellite developed by the University of Arkansas for its second CubeSat mission. There are two objectives of the ARKSAT-2 mission. The first objective of this mission is to test a novel cold gas thruster propulsion system using water-propylene propellant. This propulsion system will be used for attitude control of the satellite. The second objective for the ARKSAT-2 mission is to test a Solid-State Inflation Balloon (SSIB) that has been designed and developed for this mission. The SSIB is designed to be a simple and cost-effective method for deorbiting the vehicle. In cube satellites, a software known …

Failure Mode, Effects And Criticality Analysis Of A Very Low Earth Orbit Cubesat Mission, Robb Christopher Borowicz

Mechanical & Aerospace Engineering Theses & Dissertations

When space programs launch vehicles into orbit, multiple failures could arise throughout the mission and corrective actions are often not an option. Applying reliability engineering approaches during the design phase focuses on analyzing risk by anticipating potential failures and mitigating uncertainties in the design. Old Dominion University, in partnership with the U.S. Coast Guard Academy, and the U.S. Air Force Institute of Technology designed and developed a 3U CubeSat mission to validate on-orbit, three space technology payloads. Mission SeaLion will fly as a secondary payload on stage two of Northrop Grumman’s Antares rocket and will be deployed in a very …

Utilization Of Characteristic Modal Analysis For Antenna Design Needed For An Afit Satellite, Scott C. Podlogar

Theses and Dissertations

Antenna design is a pervasive, growing field for electrical engineers. As the number of new materials and techniques increase so too does the demand and requirements pushing forth new innovative ideas. Among these ideas is a leading edge analytic technique called Characteristic Modal Analysis (CMA) originally credited to Garbacz and Turpin. CMA works to break down the current distribution along a structure in a way that can offer great insights into how that structure operates as an antenna. This technique has great merits in post design analytics but it is rarely seen to be integrated into the design process. This …

Coupled Orbit-Attitude Dynamics And Control Of A Cubesat Equipped With A Robotic Manipulator, Charles M. Carr

Theses and Dissertations

This research investigates the utility and expected performance of a robotic servicing CubeSat. The coupled orbit-attitude dynamics of a 6U CubeSat equipped with a four-link serial manipulator are derived. A proportional-integral-derivative controller is implemented to guide the robot through a series of orbital scenarios, including rendezvous and docking following ejection from a chief spacecraft, repositioning the end effector to a desired location, and tracing a desired path with the end effector. Various techniques involving path planning and inverse differential kinematics are leveraged. Simulation results are presented and performance metrics such as settling time, state errors, control use, and system robustness …

A Proposed Mission Assurance Framework For University Cubesat Programs, Mitchell R. Thomas

Theses and Dissertations

The low cost, small form factor, and use of Commercial-Off-The-Shelf components make CubeSats an ideal platform for university use given their unique constraints. Since 2000, roughly 55% of CubeSats developed by universities fail to meet mission goals. Mission assurance, which is used to increase confidence in mission success, is based around traditional government programs, and does not provide an adequate road map for universities. Leaving them without specific guidance in tailoring mission assurance activities to operate within their constraints. This paper adapts these traditional practices to develop a baseline mission assurance framework for university CubeSat programs.

Satellite Tt&C For Cubesats With Applications For Grissom-1, Michael J. Bittle

Theses and Dissertations

This thesis describes the assessment and analysis performed to characterize the communication subsystem used for command and telemetry transmission in support of the Grissom-1 Mission (GM1). The GM1 is unique in that it represents the pathfinder for a standardized 6U bus that serves as the basis for future CubeSat missions to host a variety of technical and scientific payloads, as prioritized by the Department of Defense, requiring flight demonstration or access to the orbital environment. Lab-based testing within an anechoic chamber provided link margin data required to characterize the command and telemetry links of the GM1. Experimental data describing the …

Underactuated Attitude Control Of A Cubesat Using Cold Gas Thrusters And Nonlinear Control Methods, Adam S. Cottrell

Theses and Dissertations

Impulsive thrusters on small satellites, such as CubeSats, are typically used for attitude control. However, to become more agile, small CubeSats must also look to propulsion systems utilizing impulsive thrusters, such as cold-gas, for translational maneuvers. The combined thrust vector is often misaligned with the system's center of mass resulting in a disturbance torque. This must be counteracted by either an attitude determination and control system (ADCS), additional thrusters, or a control method to keep the satellite's attitude at or near equilibrium. Nonlinearities generated by the impulsive maneuvers are overcome via control techniques explored in this research to include on-off …

Development Of A Cubesat Conceptual Design Tool And Implementation Of The Eps Design Module, Sean K. Nogrady

Master's Theses

This thesis is the product of an effort to develop a CubeSat Conceptual Design Tool for the California Polytechnic State University CubeSat Laboratory. Such a tool is necessary due to inefficiencies with the current conceptual design process. It is being developed to increase accessibility, reduce design time, and promote good systems engineering within CubeSat development.

The development of the architecture of a conceptual design tool, the core user-interface element, and the completion of a module for the electrical power subsystem is the focus of this thesis. The architecture is built around different modules to design different subsystems that work in …

A Reference Architecture For Rapid Cubesat Development, Sean R. Kelly

Theses and Dissertations

The CubeSat class of nanosatellites has lowered the barrier of entry to space and has rapidly gained popularity in recent years. To successfully design a CubeSat system in a rapid cycle conducive to academic timelines, a Reference Architecture geared towards University CubeSat development would be helpful. A Reference Architecture would speed up the development process by providing a template, capturing previous work and lessons learned from subject matter experts, providing a framework to focus on the CubeSats design rather than the fine details of modeling software. A Reference Architecture can also add functionality that student teams could use and improve …

Comparison Of Decision Analysis Methods For A Cubesat Propulsion System, Jared L. Pilcher

Theses and Dissertations

Low Earth Orbit (LEO) is becoming an increasingly congested orbital regime. As a result, propulsion systems on CubeSats are becoming a more desirable feature to provide them with collision avoidance capabilities. To date, there have been very few CubeSat launches with a propulsion system on them. Due to the relatively high cost of a propulsion system compared to the budget of small educational organizations, a decision analysis model is needed so that these organizations can make the best decision between whether to purchase a Commercial-Off-The-Shelf (COTS) product or to develop one within the organization. This research applies three decision analysis …

Cubesat Development Framework, William D. Sousa

Theses and Dissertations

AFITs Center for Space Research and Assurance (CSRA) has developed several small satellites without a detailed developmental framework in place but future work will focus on CubeSat development with the intent of managing multiple builds concurrently. With the goal of each satellite being completed in three years, a comprehensive process needs to be established. Research revealed that the Department of Defense (DoD), U.S. Air Force (USAF), and National Aeronautics and Space Administration (NASA) guidance on the acquisition and systems engineering processes require more reviews and deliverables than appropriate for CSRAs projects. The development processes from other universities divulge some aspects …

Increasing The Reliability Of Software Systems On Small Satellites Using Software-Based Simulation Of The Embedded System, Matthew D. Grubb

Graduate Theses, Dissertations, and Problem Reports (ETD)

The utility of Small Satellites (SmallSats) for technology demonstrations and scientific research has been proven over the past few decades by governments, universities, and private companies. While the research and technology demonstration objectives that can be provided by these SmallSats are becoming similar to larger spacecraft, their reliability still falls behind. This is in part due to the reduced cost of SmallSat missions in comparison to large spacecraft, which requires cheaper components, rapid development schedules, and accepted risk. In these missions, the importance of the flight software is often overlooked, and the software is rushed through development and not fully …