Aerospace Engineering Commons^™

Theory, Implementation, And Practical Applications Of A Modern Parabolized Navier-Stokes Code, Logan B. Freeman

All Graduate Theses and Dissertations, Fall 2023 to Present

The Parabolized Navier-Stokes (PNS) method is a specialized computational approach for solving the equations that govern fluid flowing faster than the speed of sound, known as supersonic flow. By leveraging unique physical properties of supersonic environments—specifically that information cannot travel upstream—this method allows for significantly more efficient calculations than traditional approaches. Supersonic flows are important for many military and civilian applications including hypersonic weapons, high-speed passenger aircraft, and reentry. This thesis provides a comprehensive review of the two-dimensional PNS formulation, detailing the mathematical derivation and its practical implementation for solving flow problems. Through performance analysis and error assessment, this research …

A Cfd-Dem Framework For Characterizing Nanoparticle Adhesion Effects On Creeping-Flow Permeability In Composite Manufacturing, Gavin Stoker

All Graduate Theses and Dissertations, Fall 2023 to Present

Modern aircraft, spacecraft, and high-performance vehicles are increasingly built from composite materials, engineered combinations of plastics and fibers that are lighter and stronger than traditional metals. Researchers are now pushing these materials further by mixing in microscopic particles thousands of times smaller than a human hair, called nanoparticles, to make them even tougher and more resistant to damage. The challenge is getting those nanoparticles distributed evenly. During manufacturing, liquid plastic resin is pumped through a network of tightly packed fibers, carrying the nanoparticles along with it. But nanoparticles tend to clump together and stick to surfaces as they travel, clogging …

Optimal Integrated Cfd-Gnc Model For Drag-Based Reentry Dynamics, Sebastian Lopez

Doctoral Dissertations and Master's Theses

This research focuses on optimizing the control of a drag-maneuvering, Starship-class re-entry vehicle by closely integrating high-fidelity aerodynamic data derived from Computational Fluid Dynamics (CFD) simulations, specifically using StarCCM+. The aerodynamic models, tailored to the unique geometry of a drag-maneuvering body, are seamlessly incorporated into a guidance, navigation, and control (GNC) framework. This integration enables closed-loop CFD simulations with real-time control feedback, allowing for direct analysis and optimization of vehicle stability, trajectory, and control demands throughout the re-entry process.

Building upon the work of Gaglio and Bevilacqua, this advanced CFD-GNC model introduces high-order aerodynamic effects, such as aerodynamic moments and …

Numerical Investigation Of Shock-Induced Deformation Of Bubble-Laden Droplets, Juan Roldan

Doctoral Dissertations and Master's Theses

Rain impact can be a source of surface erosion on hypersonic vehicles, and the severity of each impact depends on droplet velocity, mass, and final shape, all of which are set by how the droplet breaks up under shock loading. Real droplets are expected to carry entrained non-condensable gas (NCG) nuclei from their formation. This dissertation investigates whether the purely mechanical, pressure-driven response of these nuclei, independent of vaporization, is large enough to measurably alter the internal pressure field and early deformation of a shock-loaded droplet.

The droplet and surrounding gas are modeled with a compressible, diffuse-interface, axisymmetric Eulerian framework …

Aerodynamic And Acoustic Modeling For Evtol Rotor Noise Prediction, Daniella Bezuidenhout, Anastasios S. Lyrintzis, Vladimir V. Golubev

Doctoral Dissertations and Master's Theses

This thesis presents the development and validation of a methodology for predicting total acoustic emissions from a one-fifth scale electric vertical takeoff and landing (eVTOL) rotor in both hover and edgewise flight conditions. The approach couples sectional two-dimensional Reynolds-Averaged Navier-Stokes (2D-RANS) airfoil simulations with rotor loading predictions from the Comprehensive Hierarchical Aeromechanics Rotorcraft Model (CHARM), tonal noise calculations using the acoustic solver PSU-WOPWOP, and broadband noise predictions from the UCD-QuietFly framework. Boundary-layer inputs traditionally obtained from the viscous-inviscid solver, XFOIL, were replaced with higher-fidelity 2D-RANS results from OpenFOAM to better capture low-Reynolds-number flow physics, including laminar-turbulent transition and laminar separation …

Turbulent Plenum Jet-Crossflow Validation Via Subgrid Scale Model Variation And Upstream Forcing Under Dynamic Hybrid Rans-Les, Cole W. Mccallum

Mechanical Engineering Undergraduate Honors Theses

In modern gas turbine design, film cooling has become ubiquitous as a method for limiting heat transfer between high temperature gases post-combustion and the surface of downstream blades. This paper validates the use of various computational fluid dynamics techniques in recreating an experiment measuring adiabatic effectiveness over a surface downstream of a compound-angle N2 plenum jet incident on a turbulent-air boundary layer [1]. To do this, both RANS and Dynamic Hybrid RANS-LES (DHRL) methods are implemented and compared to previous research [2]. The latter method is then modified through implementation of a different subgrid scale (SGS) model and through addition …

Numerical Study Of Nutrient Mixing In Trabecular Bone In Microgravity, Disuse And Normogravity, Sagar Gharti

Doctoral Dissertations and Master's Theses

Mechanical loading is known to regulate bone remodeling by driving interstitial fluid flow which stimulates cells and drives nutrient transport within the trabecular network. In microgravity, the absence of mechanical stimulation or loading suppresses convective flow processes, causing diffusion-driven nutrient mixing and renewal, and accelerated bone loss. This thesis investigates how oscillation frequency and trabecular bone density jointly control nutrient mixing and wall shear stress within trabecular cavities.

A computational fluid dynamics (CFD) framework is developed in STAR-CCM+ using a soft-cap oscillation model that mimics cyclic compression. Three idealized trabecular morphologies are simulated across different frequencies to represent microgravity or …

Hypersonic Non-Equilibrium Cfd And Dsmc Model Comparisons With The Varda Reentry Capsule, Jack D. Crespo, Paolo Valentini, Ashwin P. Rao, Zach S. Davis

Space Dynamics Laboratory Publications

Nonequilibrium aerothermodynamic modeling of the Varda hypersonic testbed capsule is conducted with direct simulation Monte Carlo (DSMC) and computational fluid dynamics (CFD) solvers. Flowfield properties at the 78 km reentry trajectory point are extracted to compute line of sight spectral radiance using two radiative emission codes, namely HARA and NEQAIR. Computed spectra are compared to spectral radiance measured by an in situ optical emission spectroscopy payload flown on Varda’s W-2 capsule in 2025. Model comparisons to the experimental data reveal discrepancies between the HARA and NEQAIR radiative emission predictions in both overall magnitude and qualitative behavior. NEQAIR was found to …

Assessment And Comparison Of Selected Carbon Ablation Models In Hypersonic Free-Flight And Arc-Jet Conditions, Andrew Steven Heider

Masters Theses

Accurate prediction of ablative thermal protection system (TPS) performance is critical for hypersonic vehicle design. However, numerical prediction of ablation remains challenging because results are influenced by complex physics and the choice of surface chemistry model and assumptions made in material response calculations. The objective of this work is to evaluate several carbon ablation models and their implementation within modern computational fluid dynamics (CFD) codes. Numerical simulations were performed using NASA’s LAURA flow solver and the commercial CFD code ANSYS Fluent, which coupled Navier-Stokes with surface chemistry models describing carbon oxidation, nitridation, and sublimation reactions. Several reaction sets were considered, …

Numerical And Experimental Evaluation Of A Simple, Low-Energy Lunar Volatile Separation Technology, Eleanor L. Zimmermann

Dissertations, Master's Theses and Master's Reports

In-situ resource utilization (ISRU) is the practice of finding, extracting, and using the local resources found on extraterrestrial bodies, such as the Moon and Mars. ISRU enables in-situ production of mission consumables—such as rocket fuel and potable water—which will be critical for establishing a sustainable human presence on the Moon, a goal NASA intends to accomplish by 2028 with the Artemis missions. The separation and liquefaction of locally extracted volatiles—such as water, CO₂, and Methane—is an essential component in lunar surface sustainability, but there are very few technologies being developed for this purpose. This report introduces the Radiative …

Thermal Management With Supercritical Carbon Dioxide Under Extreme Applications, Devon Hardy

Doctoral Dissertations and Master's Theses

A unique challenge in thermal system design is minimizing the power required to operate cooling systems while maintaining effective heat removal. Traditional cooling systems utilize single-phase fluids where the heat transfer mechanisms are well understood. To meet a variety of cooling demands, a range of technologies are available, including microchannel forced convection, jet impingement, porous media, nanofluids, pin fin arrays, and film cooling, each offering distinct advantages and limitations. While the performance of single- or two-phase cooling systems are generally predictable, in extreme thermal environments, new cooling solutions are needed to improve overall system efficiency and reliability.

Supercritical fluids, particularly …

Exploration Of Physics-Informed Grid Generation Technique For Wall-Modeled Les Using Eagle3d, Dominic Schneider

Doctoral Dissertations and Master's Theses

Wall-Modeled Large Eddy Simulation (WMLES) is an area of interest due to its ability to lower computational costs of LES. Even with the application of wall models, LES still proves to have practicality issues when it comes to use in industry, due to the expertise, time, and computational resources required. A novel technique for generating a lean, physics based WMLES grid is described.

The technique utilizes a RANS solution to extract turbulence information, user-specified values related to resolution of turbulent energy levels, acoustics waves, and shock waves, to generate a point cloud for producing a lean WMLES grid with in-house …

High-Fidelity Modeling Of Evtol Rotor Unsteady Aerodynamic And Aeroacoustic Response To Time-Harmonic Gust, Vadim Voropayev

Doctoral Dissertations and Master's Theses

The rapid emergence of Urban Air Mobility (UAM) demands accurate prediction and mitigation of noise generated by electric vertical take-off and landing (eVTOL) aircraft operating in complex urban environments. Among the various noise sources, the aerodynamic and acoustic response of rotors to unsteady inflow represents a major uncertainty in community-noise assessment and certification. This thesis investigates the aerodynamic and aeroacoustic behavior of a representative eVTOL rotor subjected to time-harmonic inflow disturbances, providing a detailed numerical framework to quantify how periodic gusts influence rotor performance, unsteady loading, and sound radiation.

The study employs a three-stage computational methodology using the open-source solver …

A Building Block Approach To Certification By Analysis Applied To A Ditching Analysis, Preliminary Studies, Sean Taylor

Theses and Dissertations

Extended Twin-Engine Operations (ETOPS) certification ensures safe trans-oceanic operation of transport category aircraft. A critical aspect of ETOPS certification is compliance with ditching regulations. The importance of ditching analysis has grown significantly and come under greater scrutiny because of the ‘Miracle on the Hudson’ incident. For transport category aircraft certified under 14 CFR 25 regulations, compliance with ditching requirements, rests on two major components. First, demonstrating acceptable aircraft dynamic behavior during the ditching event and second, ensuring the airframe can withstand the loads generated because of water impact.

Historically, original equipment manufacturers (OEMs) relied on comparisons to existing aircraft with …

Analyzing The Impact Of Passive Techniques On Aircraft Wing Hysteresis: An Experimental And Numerical Study, Brendan Worton

Masters Theses

This study investigates the effects of passive flow control techniques on aerodynamic hysteresis primarily in NACA 2412 (cambered) and 0012 (symmetric) wings. Computational Fluid Dynamics (CFD) was used to design and evaluate three passive techniques, including outward-facing dimples, leading-edge tubercles, and rectangular vortex generators, prior to experimental validation. These techniques demonstrated improvements in aerodynamic performance in CFD simulations and were therefore selected for wind tunnel testing to analyze their aerodynamic performance and influence on hysteresis behavior. A custom, cost-effective experimental setup was designed and developed to facilitate efficient angle-of-attack control and data acquisition. It incorporates a three-axis force sensor, stepper …

Stability Analysis Of Turbulent Fluid Flow, Adam D. Schroeder

Mathematics, Statistics, and Computer Science Honors Projects

Hydrodynamic stability refers to the study of when and how laminar flows transition to turbulence. This includes investigations of the mechanisms of transition, as well as the classification of known flow configurations as either stable or unstable and the identification of critical values of flow parameters at which this bifurcation occurs. In this thesis, we introduce the mathematical theory behind continuum mechanics and fluid dynamics as well as some tools from the study of dynamical systems. We apply these concepts to the linear stability analysis of zero pressure gradient flat plate flow via numerical simulations in OpenFOAM, discussing both the …

Micro Wind Turbine - Modelling And Testing, Mohammad Uzair Bhati

All Theses

The global energy demand continues to rise as people consume more electricity to power their personal electronics, electric vehicles, and consumer products such as outdoor tools. To generate renewable energy, large scale solar and wind farms continue to receive the most commercial attention. However, portable wind energy turbines have the potential to generate sufficient power for cell phones and other electronic devices. There are two types of wind turbines, horizontal and vertical axis each having their pros and cons. Vertical-axis wind turbines are the main focus of this thesis, with a reduction in their form factor or size and portable …

Wind-Resilient Solar: Harnessing Cfd For Enhanced Load Estimation, Aly Mousaad Aly

Faculty Publications

Solar panels are a cornerstone of renewable energy infrastructure, playing a pivotal role in global sustainability efforts. To ensure their resilience and long-term viability, accurate wind load estimations are essential for designing supporting structures, which account for nearly 50% of their total cost. However, traditional building codes lack comprehensive guidance for solar panels, resulting in inconsistent estimations due to discrepancies in scaled wall-bounded wind tunnel testing methodologies. These inaccuracies pose safety risks, increase costs, and hinder adoption. Emerging technologies like computational fluid dynamics (CFD) simulations offer a promising alternative by enabling full-scale analysis under realistic conditions of complete turbulence. This …

Numerical Investigation Of Wind Disturbance Around A Multirotor Uav In Crosswind And Vertical Flight, Garrison Page

Theses and Dissertations--Mechanical and Aerospace Engineering

Uncrewed Aerial Vehicles (UAVs) are being increasingly utilized in a wide range of research applications, especially in meteorology. This is due to such factors as their ease of use, maneuverability compared to other forms of data collection, and for rotor- craft, the ability to hover. However, the rotorwash generated by UAVs can introduce significant disturbances, potentially affecting measurement accuracy from sensors. While several studies have investigated the rotorwash of individual UAVs utilizing Particle Image Velocimetry (PIV) and Computational Fluid Dynamics (CFD), there is limited exploration into how different rotor configurations and external wind conditions influence regions of turbulent flow around …

Development Of An Immersed Boundary Method-Wall Modeled Large Eddy Simulation Approach For Incompressible Flows And Aeroacoustic Predictions, John C. Higgins

Theses and Dissertations--Mechanical and Aerospace Engineering

The performance capabilities of rotorcraft have improved significantly in the past decade as both manned and unmanned rotorcraft become a larger part of future transportation systems. Private companies as well as various government offices have worked to develop capabilities ranging from transportation/package delivery to intelligence/surveillance to livestock monitoring. Their practicality in both rural and urban areas, however, is questionable due to the significant tonal and broadband noise which is produced by the rotors. Public acceptance of rotorcraft, namely small Unmanned Aerial Vehicles (sUAVs), in transportation systems is an issue largely associated with the noise generation and it's effect on nearby …

Direct Numerical Simulation Of Pulsating Flow In Curved Pipes: Insights Into Aortic Dissection In Humans, Gokul Anugrah Gopakumar

Theses and Dissertations--Mechanical and Aerospace Engineering

This dissertation investigates the hemodynamics of pulsating blood flow in curved vessels through direct numerical simulations (DNS), with the overarching aim of uncovering fluid dynamic mechanisms linked to the onset and progression of aortic dissection in humans. The work is structured in two parts: (i) fundamental studies in idealized geometries and (ii) preliminary investigations in patient-specific anatomies. In the first part, curved pipe models representing the aortic arch are used to isolate the effects of pulsation frequency, amplitude ratio, and curvature ratio on transitional and turbulent flow dynamics. The simulations reveal that curvature-driven centrifugal forces shift the peak velocity toward …

Impact Of Weather Systems On Uav Parameters Using Computational Fluid Dynamics, Saif Aljuhaishi, Yaseen K. Al-Timimi, Basim I. Wahab

Karbala International Journal of Modern Science

Since drones cannot fly in any kind of weather, they are not safe for time-sensitive activities. The study examines how the passage of weather systems in Iraq leads to the ban on drone flights, and how these weather conditions impact the aerodynamic forces of the drone. Hourly climate data for the study area were obtained from ECMWF ERA5 and CAMS in NetCDF format for four climate stations (Erbil, Baghdad, Rutbah, and Basrah). A ScanEagle drone was chosen for this study. The Python programming language was used to perform mathematical operations to calculate the ban on drone flights. ArcGIS 10.8 was …

Development Of A Passive Drag Reduction Modification For The 25° Ahmed Body Using Large Eddy Simulation, Skylar Polek

UNLV Theses, Dissertations, Professional Papers, and Capstones

In the field of automotive aerodynamics, the Ahmed body is a generic vehicle-shaped bluff body which is meant to generalize the rear end of fastback and hatchback vehicles. Specifically, an Ahmed body with a rear slant angle of 25° has seen common use due to its resemblance of common rear windshield shapes as well as its notoriously complex wake structure. This research focuses on simulating the flow over a 25° in various situations with an ultimate goal of drag reduction. First, a simple benchmark of the k-ω shear stress transport (SST), large eddy simulation (LES) with the Smagorinsky-Lilly subgrid scale …

Numerical Simulations Of Supersonic/ Hypersonic Flows In Compression Corners And A Hypersonic Flow Study Of Atmospheric Entry Of Mars Science Laboratory Capsule, Dexter Allen

McKelvey School of Engineering Graduate Student Theses & Dissertations

This thesis consists of two related parts. The first part is the study of supersonic/hypersonic flow in compression corners. The compression corners are simple geometries but rich in flow-features that can be challenging for accurate prediction of their flow fields in high-speed compressible flow using the Reynold-Averaged Navier-Stokes (RANS) equations in conjunction with a turbulence model. At higher degrees of corner angles, there exists a shock-boundary layer interaction region which includes a significant recirculation zone in the corner. In this thesis, experimentally available test cases for compression corner at Mach 3, 8, and 11 at various corner angles are modeled …

Development Of Eagle3d Solver For Wall Modeled Les Of Transonic Flows, Spencer Moore

Doctoral Dissertations and Master's Theses

Wall modeled Large Eddy Simulation (LES) is an area of interest due to its ability to lower computational costs of LES simulation. Even with the application of wall models, LES still proves to have practicality issues when it comes to use in industry, due to the expertise, time, and computational resources required to get results. A case described by an axisymmetric transonic bump is explored utilizing the Embry-Riddle Aeronautical Universities in house unstructured finite volume multi-element CFD code, Eagle3D. Eagle3D, has been brought to the state of the art and validated against current research using this transonic bump case as …

Development Of On-The-Fly Quasi-Steady State Approximation For Chemical Kinetics In Cfd, Abhinav Balamurugan

Doctoral Dissertations and Master's Theses

This study analyzes the feasibility of On-The-Fly Quasi-Steady-State Approximation (OTF-QSSA) application for solving chemical kinetics within Computational Fluid Dynamics (CFD) simulations, aiming to reduce the computational demand of detailed mechanisms. An algorithm that dynamically identifies and designates Quasi-Steady-State (QSS) species at specific grid locations and instances during the simulation was developed. With this information, our method pseudo-delays the advancement of concentrations for these QSS species—effectively setting their rate of concentration change to zero for a set number iteration before updating using the detailed mechanism and thereby omitting the computationally intensive processes typically required for their calculation during those skipped iteration. …

Numerical Study In Wind Energy Extraction From Controlled Limit-Cycle Oscillations In Modified Glauert Airfoil, Ethan L. Deweese

Doctoral Dissertations and Master's Theses

Typically, wind energy harvesting technology employs wind turbines. Towards the goal of meeting increasing energy needs with renewable energy sources a novel wind energy harvesting scheme is considered, utilizing a modified Glauert (MG) airfoil experiencing aeroelastic limit cycle oscillation (LCO) from which energy may be extracted. Synthetic jet actuators (SJA)s are used along with the unique geometry of the MG airfoil to control flow separation and amplify the LCO and energy generation potential of the system. The discussed wind energy harvesting scheme could provide flexibility in allowing installations previously unsuitable to wind turbines due to geometric or low wind velocity …

Optimization Of High-Bypass Turbofan High-Pressure Compressor Blade – A Case Study, Adeel Khalid, Vlad Mandzyuk

The Kennesaw Journal of Undergraduate Research

This research determines the relationship between the High-Pressure Compressor (HPC) rotor blade design variables and compressor pressure ratio of a high bypass turbofan engine. Alterations in the HPC blades span, chord, taper, twist, number, and angle of incidence are performed and their effect on the HPC pressure ratio is observed. The objective is to determine key parameters that could maximize the performance of a high-pressure compressor for a given mission. Physics-based modeling, Computational Fluid Dynamics (CFD), and wind-tunnel testing are performed to compare and validate findings. Physics-based modeling is performed to serve as the benchmark for data obtained through other …

Winglet Vortex Optimization, Adeel Khalid, Anthony Gutierrez

The Kennesaw Journal of Undergraduate Research

The objective of this research is to determine the effect on aerodynamic performance due to changes of winglet design variables of the Boeing 737-700 aircraft. The various winglet types studied in this research include the blended, canted, wingtip fence and split scimitar. The variables include height, sweep angle, taper ratio, and inclination angle. These variables are altered in 5% increments from -15% to +15% of their original baseline values. Each altered winglet design only changes one variable at a time while keeping all other variables constant. The altered models are compared to the original by finding the aerodynamic efficiency through …

Experimentatal And Numerical Investigation Of Turbojet Engine Performance, Emissions, And Noise/Vibrations Using Jet-A And F24 Fuel, John W. Mcafee Jr

College of Graduate Studies: Theses & Dissertations

Drastic improvement in cost effectiveness of high-power computing resources has generated a great interest numerical simulation to reduce the overhead cost of engine manufacturing, maintenance, and environmental concerns of engine testing. To accomplish this goal, this research presents the differences between military F24 fuel and commercial aviation fuel Jet-A from a thermochemical and engine performance perspective. This experimental data was used to create and validate a numerical model of the engine used in the experiments fueled with both Jet-A and F24 fuels. The experimental data was collected using a research based single stage turbojet engine outfitted with many sensors for …