Projected Velocity And Efficiency Trends For A Pulsed Fusion Magnetic Nozzle, Lloyd M. Jackson

Von Braun Symposium Student Posters

No abstract provided.

Hüpla Vlf Lightning Detector: Hopes, Dreams, & Duct Tape, K Coates, D Everding, N Kaifler, P Kühl, R Puestow

Von Braun Symposium Student Posters

No abstract provided.

Firefly--Fusion-Powered Interstellar Rendezvous And Exploratory Flying Laboratory, Mitchell Rodriguez

Von Braun Symposium Student Posters

No abstract provided.

Rapid Settlement Architecture“Pebble Station”, Joshua M. Brock

Von Braun Symposium Student Posters

No abstract provided.

Balloonsat As A Platform For Deploying The Neutron Counter, Mark Becnel

Von Braun Symposium Student Posters

No abstract provided.

Magnetic Field Mapping In The Plasmoid Thruster Experiment (Ptx), Coby W. Mccolgin

Von Braun Symposium Student Posters

No abstract provided.

Libra The Airborne Launch-Pad, Lucas Schoukroun, Amandine Delahaye

Von Braun Symposium Student Posters

No abstract provided.

Current Sheet Structures From Ace And Messenger Observations, Lorin Arnold, Gang Li

Von Braun Symposium Student Posters

No abstract provided.

The Case For An L1 Space Station For Stellar Missions, Wade Harlow

Von Braun Symposium Student Posters

No abstract provided.

A Probabilistic Design Analysis Approach In Reducing The Overall Risk Of A Fusion Propulsion Spacecraft, Natalie Walker

Von Braun Symposium Student Posters

No abstract provided.

Student Launch Initiative: Boosted Dart Rocket, Charger Rocket Works

Von Braun Symposium Student Posters

No abstract provided.

Plasma Jet Magneto Inertial Fusion Thruster Concept, Richard Hatcher

Von Braun Symposium Student Posters

No abstract provided.

Beamed Energy For Ablative Propulsion In Near Earth Space, Grant Bergstue

Von Braun Symposium Student Posters

No abstract provided.

Design And Development Of An Advanced Thermonuclear Fusion Propulsion R&D Facility At Uahuntsville, Ross J. Cortez

Von Braun Symposium Student Posters

No abstract provided.

Direct Numerical Simulation Of Hypersonic Turbulent Boundary Layers. Part 4. Effect Of High Enthalpy, L. (Lian) Duan, M. P. Martín

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper we present direct numerical simulations (DNS) of hypersonic turbulent boundary layers to study high-enthalpy effects. We study high-and low-enthalpy conditions, which are representative of those in hypersonic flight and ground-based facilities, respectively. We find that high-enthalpy boundary layers closely resemble those at low enthalpy. Many of the scaling relations for low-enthalpy flows, such as van-Driest transformation for the mean velocity, Morkovin's scaling, and the modified strong Reynolds analogy hold or can be generalized for high-enthalpy flows by removing the calorically perfect-gas assumption. We propose a generalized form of the modified Crocco relation, which relates the mean temperature …

Considerations For Numerical Modeling Of Inverted Wings In Ground Effects, Graham Doig, Tracie J. Barber

Aerospace Engineering

No abstract provided.

Performance Analysis Of A Variable Conductance Heat Pipe, Herron Arreola

Aerospace Engineering

This report examines the analysis of a donated Boeing variable conductance heat pipe with unknown performance characteristics. These characteristics were found through experimental means by utilizing 14 thermocouples attached to various locations on the heat pipe, the heaters and to the insulation. Although the maximum axial heat transport capability could not be determined due to the limited number of strip heaters available, the maximum radial heat flux capability of the heat pipe was found to be 2.46 W/in². The experiment also revealed that increasing the input power decreased the burn out inclination angle and that using a coolant …

Constrained Hermite Tls For Mesh-Free Derivative Estimation Near And On Boundaries, Robert A. Mcdonald, Alejandro Ramos

Aerospace Engineering

A Taylor series least-squares approach to estimating derivatives on scattered data is extended to include derivative observation or specification. This approach allows improved estimation of derivatives near boundaries as compared with the standard ghost node approach. It also enables a unique method of estimating derivatives in a surface using only surface data.

A Multi-Regulator Sliding Mode Control Strategy For Output-Constrained Systems, Hanz Richter

Mechanical Engineering Faculty Publications

This paper proposes a multi-regulator control scheme for single-input systems, where the setpoint of a regulated output must be changed under the constraint that a set of minimum-phase outputs remain within prescribed bounds. The strategy is based on a max–min selector system frequently used in the aerospace field. The regulators used for the regulated and limited outputs are of the sliding mode type, where the sliding variable is defined as the difference between an output and its allowable limit. The paper establishes overall asymptotic stability, as well as invariance properties leading to limit protection. The design methodology is illustrated with …

Effective Approach For Estimating Turbulence-Chemistry Interaction In Hypersonic Turbulent Boundary Layers, L. (Lian) Duan, M. P. Martín

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An effective approach for estimating turbulence-chemistry interaction in hypersonic turbulent boundary layers is proposed, based on "laminar- chemistry" Reynolds-averaged Navier-Stokes mean flow solutions. The approach combines an assumed probability density function with a temperature fluctuation scaling, which provides the second moment for specifying the shape of the probability density function. As a result, the effects of temperature fluctuation on chemical production rates can be estimated without solving an additional moment evolution equation. The validity of this method is demonstrated using direct-numerical-simulation data. This approach can be used to identify regions with potentially significant turbulence-chemistry interaction in hypersonic boundary layers and …

Mars Carbon Dioxide Propulsion, Christopher Cushman Perry

Mechanical & Aerospace Engineering Theses & Dissertations

An experimental investigation was conducted to characterize the performance of a small-scale supersonic propulsion system using supercritical CO₂ as a propellant intended for Mars surface applications. This research has focused on estimating the specific impulse behavior of high-pressure carbon dioxide propellant that can be produced by condensing dry ice out of Mars's atmosphere and heating it at constant volume to temperatures above its 31.1 ° C critical temperature. Since supercritical fluid was created by heating different dry ice-vapor mixtures to moderate temperatures, the nominal initial density and thermodynamic state within the pressure vessel could be controlled. The instrumented test …

An Automated Test Station Design Used To Verify Aircraft Communication Protocols, Joshua Berrian

Master's Theses

Requirements verification is typically the costliest part of the systems engineering design process. In the commercial aircraft industry, as the software and hardware design evolves, it must be verified to conform to requirements. In addition, when new design releases are made, regression analysis must be performed which usually requires repeat testing. To streamline verification, a suite of automated verification tools is described in this document which can reduce the test effort. This test suite can be qualified to be used to verify systems at any DO-178B design assurance level. Some of the software tools are briefly described below.

There are …

Study Of The Role Of Pressure Relaxation In Inviscid, Incompressible Flows, Jonathan Strzelec

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis has investigated the role of pressure relaxation in inviscid, incompressible flows. A modified form of the classical Bernoulli equation was developed from a vector form of the Navier-Stokes equation which includes pressure relaxation and bulk viscosity. This modified Bernoulli equation was utilized to compare two-dimensional potential flow pressure distributions over a sphere, cylinder, backward and forward facing steps. Finally, the modified Bernoulli equation was utilized to compare the theoretical bounding free streamline to an experimentally observed free streamline over a knife edge. Results of these comparisons show that the classical form of the Bernoulli equation can over-predict the …

A Fixed Robotic Mars Base Architecture, Christie Angunette Alston

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis proposes a fixed Mars base architecture consisting of the following interconnected elements: landing area, power generation, in-situ resource utilization (ISRU), robotic repair and assembly, and a scientific research laboratoiy. The base architecture that has been put forward can be expanded readily to include future elements such as a sustainable human habitat. The base architecture approach was developed assuming that serial Earth-launched lander missions were too expensive and too slow going forward in effecting the systematic exploration of a planet whose surface area constitutes nearly the same area as the land mass of Earth. The fixed base architecture facilitates …

Development Of A Higher-Order Navier-Stokes Solver For Transient Compressible Flows, Arjun Vijayanarayanan

Doctoral Dissertations and Master's Theses

A higher‐order density based Navier‐Stokes solver was developed for 2‐Dimensional flows using the finite volume approach. The Van leer flux‐splitting technique was used to calculate the fluxes. The second‐order spatial accuracy was achieved using the variable extrapolation method developed by Van leer called the Montone Upstream Centered Scheme for Conservation Laws (MUSCL) approach. The code development was done using Matlab. The code was verified using two validation cases. Firstly, subsonic, transonic, and supersonic flows over the 2‐D bump were simulated, and the results of the code were compared to the results from Fluent. Secondly, the shock‐tube problem was chosen, and …

Innovative Double Bypass Engine For Increased Performance, Sanjivan Manoharan

Doctoral Dissertations and Master's Theses

Engines continue to grow in size to meet the current thrust requirements of the civil aerospace industry. Large engines pose significant transportation problems and require them to be split in order to be shipped. Thus, large amounts of time have been spent in researching methods to increase thrust capabilities while maintaining a reasonable engine size. Unfortunately, much of this research has been focused on increasing the performance and efficiencies of individual components while limited research has been done on innovative engine configurations. This thesis focuses on an innovative engine configuration, the High Double Bypass Engine, aimed at increasing fuel efficiency …

The Propulsive Design Aspects On The World’S First Direct Drive Hybrid Airplane, Ankit Nanda

Doctoral Dissertations and Master's Theses

The purpose of this thesis is to design a safe technology demonstrator by implementing a direct drive propulsion system for a gas-electric hybrid aircraft. This system was integrated on the Embry-Riddle Eco-Eagle for the Green Flight Challenge 2011. The aim of the system is to allow the pilot to use the electric motor as an independent power source to fly the aircraft once at cruise altitude, while having a gas engine to allow for higher power capability.

The system was designed to incorporate the motor and the motor control unit provided by Flight Design and Drivetek AG alongside a Rotax …

Integration Of Unmanned Aerial Systems In Class E Airspace: The Effect On Air Traffic Controller Workload, Jeeja S. Vengal

Doctoral Dissertations and Master's Theses

As technology rapidly advances and our imagination is no longer fantasy but instead reality, the aviation community needs to concentrate on the harsh truth of airspace safety. In the situation of integrating unmanned aerial systems (UASs) into the National airspace, UASs outside of terminal areas would generally be permitted to fly their preferred routes, and self-separate, with minimal intervention from air traffic control. From an air traffic control perspective, the integration could raise a number of human performance problems including workload extremes and passive-monitoring demands. One fundamental requirement for operation in the National Air Space is to preserve the safety …

Numerical Analysis Of Gun Barrel Pressure Blast Using Dynamic Mesh Adaption, Sathish Xavier

Doctoral Dissertations and Master's Theses

A Computational Fluid Dynamics (CFD) method has been applied to simulate the pressure blast of the projectile which is launched from a barrel and to investigate the pressure distribution and sound pressure level (dB) along different positions away from the gun axis and towards the fuselage of the aircraft. Fluent was employed to simulate the unsteady flow using dynamic mesh with moving boundary. Most CFD based ballistics-model requires additional thermodynamic functions which must be derived from the Noble-Abel equation of state. The unsteady, axisymmetric Navier Stokes equation systems were numerically solved using the Advection Upstream Splitting Method (AUSM) scheme; with …

State Of The Art Of Piloted Electric Airplanes, Nasa's Centennial Challenge Data And Fundamental Design Implications, Lori Anne Costello

Doctoral Dissertations and Master's Theses

The purpose of this study was to determine the current state of the electric airplane as primarily defined by results from NASA's Green Flight Challenge Competition. New equations must be derived in order to determine the endurance and range for electric airplanes since the standard equations depend upon weight change over a flight and the weight of an electric airplane does not change. These new equations could then be solved for the optimal velocity and altitude which were the two driving factors that could change range and endurance for a given airplane configuration. The best velocity for range and endurance …