Aerospace Engineering Commons^™

Activity Node Based Flight Software As A Benefit To Systems Engineering, Eugene Daniel Lewis

Master's Theses

This report discusses one application of a flight software design for a spacecraft in which the software executes from a database that can be managed by systems engineering. This report gives an overview of how such a software design can be developed and implemented. It also discusses why this approach is beneficial to the systems engineering program.

Cubesat Mission Planning Toolbox, Brian Castello

Master's Theses

We are in an era of massive spending cuts in educational institutions, aerospace companies and governmental entities. Educational institutions are pursuing more training for less money, aerospace companies are reducing the cost of gaining ight heritage and the government is cutting budgets and their response times. Organizations are accomplishing this improved efficiency by moving away from large-scale satellite projects and developing pico and nanosatellites following the CubeSat specifications. One of the major challenges of developing satellites to the standard CubeSat mission requirements is meeting the exceedingly tight power, data and communication constraints.

A MATLAB toolbox was created to assist the …

Feasibility Study Into The Use Of 3d Printed Materials In Cubesat Flight Missions, Daniel Fluitt

Master's Theses

The CubeSat Program has provided access to space for many universities, private companies, and government institutions primarily due to the low cost of CubeSat satellite development. While these costs are orders of magnitude lower than similarly capable nano-satellite missions, they are still outside of the budgetary constraints of many potential developers including university and high school clubs. Using 3D printed plastics in the production of CubeSat structures and mechanisms presents a large cost savings opportunity that will allow these institutions to participate in the development of these satellites, expanding the educational and scientific impact of the CubeSat Program.

Five rapid …

Implementation Of A ¼ Inch Hollow Cathode Into A Miniature Xenon Ion Thruster (Mixi), David Wayne Knapp

Master's Theses

Over the last decade, miniature ion thruster development has remained an active area of research do to its low power, low thrust, and high efficiency, however, due to several technical issues; a flight level miniature ion thruster has proved elusive. This thesis covers the design, fabrication, assembly, and test of an altered version of the Miniature Xenon Ion thruster (MiXI), originally developed by lead engineer Dr. Richard Wirz, at the California Institute of Technology (Caltech). In collaboration with Dr. Wirz, MiXI-CP-V3 was developed at Cal Poly San Luis Obispo with the goal of implementing of a ¼ inch hollow cathode …

An Investigation Of Damage Arrestment Devices On Carbon Fiber Sandwich Specimens Under Dynamic Loading, Gabriel Sabino Sanchez

Master's Theses

This research studies the effects of a damage arrestment device embedded between a carbon fiber facesheet and foam core to find whether there is an increase in the structural integrity of the sandwich composites. Experimental and theoretical finite element analyses are implemented for two different composite sandwich geometries; plates and beams. Each structure consisted of the same loading criteria and was restricted to the same vibration fixture during the experiment. An accelerometer was placed on the composite plate to record the amplitude and the natural frequencies of the composite structure. Each composite specimen is then fixed to the surface of …

Hapss, Hybrid Aircraft Propulsion System Synthesis, Michael W. Green

Master's Theses

Hybrid Aircraft Propulsion System Synthesis (HAPSS) is a computer program that sizes and analyzes pure-series hybrid electric propulsion systems for aircraft. The development of this program began during a NASA SBIR contract, in conjunction with Empirical Systems Aerospace (ESAero), with the creation of a propulsion fan design tool. Since the completion of this contract in July 2010, the HAPSS program has been expanded to combine the many aspects of a hybrid propulsion system such as the propulsive fans, electric motors, generators, and controllers, and the internal combustion engines.

This thesis describes the benefits and drawbacks of aircraft hybrid propulsion systems …

Modal Analysis Of Composite Structures With Damping Material, Kellie Michelle Tremaine

Master's Theses

The purpose of this study is to develop an analytical solution for modal analysis of actively damped orthotropic composite plates in bending and to verify it with experimental analysis.

The analytical modal analysis solution for composite plate dynamics is derived using Euler theory. This analysis applies to structures with orthotropic lamina of uniform material properties at any lamination angle. The bending-extensional coupling can be neglected for plates that are symmetric or approximately symmetric, which allows an exact solution for natural frequency and mode shape to be obtained. An exact solution can be found for natural vibration and in general.

The …

Day/Night Band Imager For A Cubesat, Eric Stanton

Electrical Engineering

Day/Night Band (DNB) earth sensing and meteorological systems like the Defense Meteorological Satellite Program (DMSP) Operational Linescan System (OLS) provide visible wavelength imagery 24 hours a day that is used primarily for cloud imaging in support of weather forecasting. This paper describes a compact push-broom imager that meets low light imaging requirements for DMSP OLS and the NOAA/NASA Joint Polar Satellite System (JPSS) as documented in the Integrated Operational Requirements Document [1] (IORD) including the imager design, system level concepts of operation for data collection, radiometric and spatial calibration, and data transmission to Earth. This small, lightweight imager complies with …

High-Fidelity Low-Thrust Trajectory Determination Research And Analysis, Tyler Hill

Aerospace Engineering

This document discusses a numerical analysis method for low thrust trajectory propagation known as the proximity quotient or Q-Law. The process uses a Lyapunov feedback control law developed by Petropoulos^[1] to propagate trajectories of spacecraft by minimizing the user defined function at the target orbit. A simplified propagator is created from the core mechanics of this method in MATLAB and tested in several user defined cases to demonstrate its capabilities. Several anomalies arose in test cases where variations in eccentricity, inclination, right ascension of the ascending node, and argument of perigee were specified. Solutions to these anomalies are discussed …

Interstellar Mission To Gliese 581, Brock Schmalzel, Brian Tsoi

Aerospace Engineering

This report details a conceptual design for a one-way, interstellar mission, based upon assumed technological advances over the next few hundred years. It addresses the unique challenges associated with an interstellar mission, looking at both developed and theoretical technologies. This report looks specifically at propulsion systems required to reach an exoplanet. In addition, the power, communication, and orbital trajectories are analyzed to see the differences and technological advancements necessary for future missions and the proposed interstellar mission. The destination for the interstellar mission in Gliese 581, a star system located 20.3 light years away and has 5 known planets and …

Low Cost Vacuum Chamber Design For Electromagnetic Railgun Operation, Andrew W. Bothwell, David J. Foster

Aerospace Engineering

This report describes the design and fabrication of a low cost vacuum chamber capable of supporting the operation of an electromagnetic railgun. This would be used to simulate the impact of high velocity impacts in space. The vacuum chamber was constructed out of 10in diameter 10ft PVC pipe with a Wye fitting for viewing impacts during testing. The chamber was designed to accommodate a 6.5in X 6.5in X 60in railgun. The vacuum chamber feedthroughs were designed to be able to carry 1-2Mamps at 8kV to the railgun. The vacuum chamber is capable of reaching 50 Torr and remaining under 100 …

The Numerical Open-Source Many-Body Simulator (Noms), Jason Lloyd Daniel, Javen Kyle Foster-O'Neal

Aerospace Engineering

This paper outlines the setup and creation of an object-oriented N-body simulator as part of a continued project to explore physical phenomenon and human-computer natural interaction technologies. The tools and processes required to build an N-body simulator are also included. Several integrators were evaluated based on their ability to maintain system energy The 2nd order integrator Verlet and 3rd order integrator Hermite algorithms had the greatest accuracy to model large-scale N-body dynamics for their given computation time. Other algorithms required significantly shorter time steps to achieve similar short-term accuracy. At present, NOMS can reasonably simulate 10,000 particles at less than …

An Experimental Investigation Of Glare And Restructured Fiber Metal Laminates, Adelina Vanessa Benedict

Doctoral Dissertations and Master's Theses

Fiber Metal Laminates (FMLs) are a group of materials fabricated by bonding glass/epoxy layers within metal layers. This class of materials can provide good mechanical properties, as well as weight savings. An FML known as Glass Laminate Aluminum Reinforced Epoxy (GLARE) was studied. An experimental investigation comprising of microscopy and tensile testing was carried out using different grades of GLARE. Microscopy revealed the construction details of GLARE, while tensile testing provided means of measuring and analyzing its stress-strain responses. Next, different metal surface pretreatment methods were explored. These included sandblasting, Phosphoric Acid Anodizing (PAA), and AC-130 Sol-Gel treatment. Woven S-2 …

Analysis And Testing Of Heat Transfer Through Honeycomb Panels, Daniel D. Nguyen

Aerospace Engineering

This project attempts to simulate accurately the thermal conductivity of honeycomb panels in the normal direction. Due to the large empty space of the honeycomb core, the thermal radiation mode of heat transfer was modeled along with conduction. Using Newton’s Method to solve for a steady state model of heat moving through the honeycomb panel, the theoretical effective thermal conduction of the honeycomb panel was found, ranging from 1.03 to 1.07 Q/m/K for a heat input of 2.5 W to 11.8 W. An experimental model was designed to test the theoretical results, using a cold plate and a heat plate …

Design Of Orbital Maneuvers With Aeroassisted Cubesatellites, Stephanie Clark

Graduate Theses and Dissertations

Recent advances within the field of cube satellite technology has allowed for the possible development of a maneuver that utilizes a satellite's Low Earth Orbit (LEO) and increased atmospheric density to effectively use lift and drag to implement a noncoplanar orbital maneuver. Noncoplanar maneuvers typically require large quantities of propellant due to the large delta-v that is required. However, similar maneuvers using perturbing forces require little or no propellant to create the delta-v required. This research reported here studied on the effects of lift on orbital changes, those of noncoplanar types in particular, for small satellites without orbital maneuvering thrusters. …

Reduction Of Solid-Solid Thermal Boundary Resistance By Inserting An Interlayer, Zhi Liang, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

An Effective Method is Proposed to Greatly Improve the Thermal Transport Across the Interface between Two Solids with Dissimilar Phonon Spectra. If the Two Solids Have Similar Crystal Structure and Lattice Constant, It is Predicted from the Molecular Dynamics Modeling that an over 50% Reduction of the Thermal Boundary Resistance Can Be Achieved by Inserting a 3-Unit-Cell-Thick Interlayer Whose Debye Temperature is Approximately the Square Root of the Product of the Debye Temperatures of the Two Solids. on the Other Hand, If the Two Solids Have a Large Difference in Lattice Constant, It is Found the Interfacial Atomic Restructuring Plays …

Novel Heavy Duty Engine Concept For Operation Dual Fuel H 2-Nh3, Alberto A. Boretti

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A prior paper has presented a novel design of a heavy-duty truck engine fueled with H2. in this design, the customary in-cylinder Diesel injector and glow plug are replaced with a main chamber fuel injector and a jet ignition pre-chamber. the jet ignition pre-chamber is a small volume that is connected to the in-cylinder through calibrated orifices accommodating another fuel injector and a glow or a spark plug that controls the start of combustion. This design permits to operate the engine in four different modes: traditional compression ignition (CI), diffusion, Diesel-like (M1); mixed gasoline/Diesel-like (M2); traditional spark ignition (SI), premixed, …

Statistical Methods For Launch Vehicle Guidance, Navigation, And Control (Gn&C) System Design And Analysis, Michael Benjamin Rose

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A new tool for launch vehicle design and analysis is developed. The tool is capable of rapid analysis of requirements tradeoffs affecting system design and developed to reduce turnaround time for launch vehicle design and mission planning. It is streamlined to quickly determine trajectory and attitude control dispersions which represent how far the actual trajectory is expected to deviate from the nominal flight path, propellant dispersions which represent how much propellant is required to meet mission requirements, and navigation errors which represent how far the navigation filter’s estimate of the actual trajectory is expected to deviate from the actual trajectory. …

Evaluation Of Turbulence Variable Distributions For Incompressible Fully Rough Pipe Flows, Emilie B. Fowler

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The specific turbulent kinetic energy, root-mean-square fluctuating vorticity, and mean-vortexwavelength distributions are presented for fully rough pipe flow. The distributions of these turbulence variables are obtained from a proposed turbulence model. Many of the turbulence models commonly used for computational fluid dynamics are based on an analogy between molecular and turbulent transport. However, traditional k-ε and k-ω models fail to exhibit proper dependence on the molecular viscosity. Based on a rigorous application of the Boussinesq’s hypothesis, Phillips proposed a vorticity-based transport equation for the turbulent kinetic energy. The foundation for this vorticity-based transport equation is presented. In future development of …

Sun-Synchronous Orbit Slot Architecture Analysis And Development, Eric Watson

Master's Theses

Space debris growth and an influx in space traffic will create a need for increased space traffic management. Due to orbital population density and likely future growth, the implementation of a slot architecture to Sun-synchronous orbit is considered in order to mitigate conjunctions among active satellites. This paper furthers work done in Sun-synchronous orbit slot architecture design and focuses on two main aspects. First, an in-depth relative motion analysis of satellites with respect to their assigned slots is presented. Then, a method for developing a slot architecture from a specific set of user defined inputs is derived.

An Inverse Design Method For Supersonic Airfoils, Steven Edward Skare

Master's Theses

Airfoil design is one of the most important aspects of aircraft design. Slight changes in airfoil geometry can lead to significant changes in a wide variety of aircraft performance metrics. Inverse design methods offer an efficient alternative to standard direct methods. The key to this design problem is to derive a direct relationship between changes in airfoil geometry and changes in pressure or velocity distributions. This relationship is then used to modify an initial airfoil and its pressure distribution to match a target pressure distribution, which is specified by design parameters. At this point, the engineer now has a final …

Primary And Secondary Flow Interactions In The Mixing Duct Of A 2-D Planer Air Augmented Rocket, Martin Roy Popish

Master's Theses

Experiments were conducted on the Cal Poly air augmented rocket (AAR) in order to characterize two-dimensional flowfield phenomenon occurring in the mixing duct. The testing utilized a direct connect system where high pressure nitrogen is fed into the combustion chamber, to form a primary flow. The high pressure nitrogen is then expanded through a nozzle, with an area ratio of 22 and an exit area of 0.75 in², up to Mach 4.3. Secondary air is entrained from a plenum chamber which is used to create a lower stagnation pressure for the secondary flow. The two flows mix in …

Spacecraft And Propulsion Technician Error, Daniel Clyde Schultz

Doctoral Dissertations and Master's Theses

Commercial aviation and commercial space similarly launch, fly, and land passenger vehicles. Unlike aviation, the U.S. government has not established maintenance policies for commercial space. This study conducted a mixed methods review of 610 U.S. space launches from 1984 through 2011, which included 31 failures. An analysis of the failure causal factors showed that human error accounted for 76% of those failures, which included workmanship error accounting for 29% of the failures. With the imminent future of commercial space travel, the increased potential for the loss of human life demands that changes be made to the standardized procedures, training, and …

Heat, Mass And Force Flows In Supersonic Shockwave Interactions, John Michael Dixon

UNLV Theses, Dissertations, Professional Papers, and Capstones

There is no cost effective way to deliver a payload to space and, with rising fuel prices, currently the price to travel commercially is also becoming more prohibitive to the public. During supersonic flight, compressive shock waves form around the craft which could be harnessed to deliver an additional lift on the craft. Using a series of hanging plates below a lifting wing design, the total lift generated can be increased above conventional values, while still maintaining a similar lift-to-drag ratio. Here, we study some of the flows involved in supersonic shockwave interaction. This analysis uses ANSYS Fluent Computational Fluid …

An Investigation Into Delta Wing Vortex Generators As A Means Of Increasing Algae Biofuel Raceway Vertical Mixing Including An Analysis Of The Resulting Turbulence Characteristics, Aaron H. Godfrey

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Current standards of living and future prosperity are closely tied to the availability of sufficient and inexpensive energy resources. Currently society is fueled primarily by some form of fossil fuel. By their very nature these fuel sources are non-renewable, thus our current energy habits are unsustainable. Among the various renewable energy technologies is the capability to produce diesel fuel by colonies of algae. While this technology has many positive features it remains too expensive to be a realistic fuel source. The current work performed analysis using computer simulation of an aquatic environment commonly used to grow algae for the purposes …

Spacecraft Collision Probability Estimation For Rendezvous And Proximity Operations, Michael R. Phillips

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

An increasing number of missions require spacecraft to fly in close proximity. Despite the technological advances that have made these types of missions increasingly possible there remains a limit to how accurately the trajectory of a spacecraft can be predicted. As such, one of the main risks to spacecraft in close proximity is the threat of a collision. Many methods exist for computing the probability of collision between spacecraft. These methods incorporate the uncertainty in predicting the spacecrafts motion when computing an estimate. The accuracy and required computation time of these methods very greatly. A poor estimate of collision risk …

Effective Thermal Conductivity Of Tri-Isotropic (Triso) Fuel Compacts, Charles P. Folsom

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Next Generation Nuclear Plant (NGNP) program objective is to develop a new type of nuclear reactor that produces process heat instead of electricity. The process heat can be used in the production of hydrogen and many other industrial processes. As part of the NGNP program a new type of nuclear fuel is being developed. The fuel is a composite construction of specially coated fuel particles and graphite pressed together in a cylindrical compact.

Thermal conductivity is an important thermophysical property of the fuel that needs to be measured. Knowledge of the thermal conductivity of the fuel will provide accurate …

Comm-Multiple Access - Slides, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs on "Comm-Multiple Access" from April 24, 2012.

Ec 723 Satellite Communication Systems, Mohammed Khedr

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Mohammed Khdr titled "EC 723 Satellite Communication Systems" from April 10, 2012.

Space Science And Astrophysics Programs, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Space Science and Astrophysics Programs" from April 9, 2012.