Aerospace Engineering Commons^™

A Comparison Of Combined Overlap Block Fuzzy Cognitive Maps (Cobfcm) And Combined Overlap Block Neutrosophic Cognitive Map (Cobncm) In Finding The Hidden Patterns And Indeterminacies In Psychological Causal Models: Case Study Of Adhd, Hojjatollah Farahani, Florentin Smarandache, Lihshing Leigh Wang

Branch Mathematics and Statistics Faculty and Staff Publications

In spite of researchers’ concerns to find causalities, reviewing the literature of psychological studies one may argue that the classical statistical methods applied in order to find causalities are unable to find uncertainty and indeterminacies of the relationships between concepts.

In this paper, we introduce two methods to find effective solutions by identifying “hidden” patterns in the patients’ cognitive maps. Combined Overlap Block Fuzzy Cognitive Map (COBFCM) and Combined Overlap Block Neutrosophic Map (COBNCM) are effective when the number of concepts can be grouped and are large in numbers. In the first section, we introduce COBFCM, COBNCM, their applications, and …

Design Of A High Intensity Turbulent Combustion System, Mohammad Arif Hossain

Open Access Theses & Dissertations

In order to design next generation gas turbine combustor and rocket engines, a systematic study of flame structure at high intensity turbulent flow is necessary. The fundamental study of turbulent premixed combustion has been a major research concern for decades. The work is focused on the design and development of a high intensity turbulent combustion system which can be operated at compressible (0.3 < M < 0.5), preheated (T0=500K) and premixed conditions in order to investigate the 'Thickened Flame' regime. An air-methane mixture has been used as the fuel for this study. An optically accessible backward-facing step stabilized combustor has been designed for a maximum operating pressure of 6 bar. A grid has been introduced with different blockage ratios (BR = 54%, 61% & 67%) in order to generate turbulence inside the combustor for the experiment. Optical access is provided via quartz windows on three sides of the combustion chamber. Finite Element Analysis (FEA) is done in order to verify the structural integrity of the combustor at rated conditions. In order to increase the inlet temperature of the air, a heating section was designed to use commercially available in-line heaters. Separate cooling subsystems have been designed for chamber cooling and exhaust cooling. The LabVIEW software interface has been selected as the control mechanism for the experimental setup. A 10 kHz Time Resolved Particle Image Velocimetry (TR-PIV) system and a 3 kHz Planer Laser Induced Fluorescence (PLIF) system have been integrated with the system in order to diagnose the flow field and the flame respectively. The primary understanding of the flow field inside the combustor was achieved through the use of Detached Eddy Simulation (DES) by using commercially available software package ANSYS FLUENT. Preliminary validation is done by 10 kHz TR-PIV technique. Both qualitative and quantitative analysis have been done for CFD and experiment. Major flow parameters such as average velocity, fluctuation of velocity, kinetic energy, and turbulent intensity have been calculated for two distinct Reynolds number (Re = 815 & 3500). PIV results are compared with CFD results which show significant agreement with each other.

Cubesat Wakes In The Earth’S Ionosphere, Robert M. Albarran Ii

Doctoral Dissertations and Master's Theses

Space exploration is currently being revolutionized by the advent of the CubeSat: 10cm cubed satellites that typically deploy in constellations for less than $100,000. Spacecraft instrumentation design must be redefined to abide by the compact CubeSat payload. Furthermore, the CubeSat dimension must be considered with respect to characteristic length scales of the space plasma environment, namely, the Debye length. Although spacecraft-plasma interactions- surface charging, plasma sheaths and wakes- have been well-studied for larger satellites, they are less understood for CubeSats.

The Dynamic Ionosphere CubeSat Experiment (DICE) is a 1.5U CubeSat which recently ended its mission. DICE carried two fixed-bias Langmuir …

Correlation Of Csk2sb Photocathode Lifetime With Antimony Thickness, M. A. Mamun, C. Hernandez-Garcia, M. Poelker, A. A. Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

CsK₂Sb photocathodes with quantum efficiency on the order of 10% at 532 nm, and lifetime greater than 90 days at low voltage, were successfully manufactured via co-deposition of alkali species emanating from an effusion source. Photocathodes were characterized as a function of antimony layer thickness and alkali consumption, inside a vacuum chamber that was initially baked, but frequently vented without re-baking. Photocathode lifetime measured at low voltage is correlated with the antimony layer thickness. Photocathodes manufactured with comparatively thick antimony layers exhibited the best lifetime. We speculate that the antimony layer serves as a reservoir, or sponge, for …

Modeling, Dynamics And Control Of Spacecraft Relative Motion In A Perturbed Keplerian Orbit, Mohamed Okasha, Brett Newman

Mechanical & Aerospace Engineering Faculty Publications

The dynamics of relative motion in a perturbed orbital environment are exploited based on Gauss' and Cowell's variational equations. The inertial coordinate frame and relative coordinate frame (Hill frame) are used, and a linear high fidelity model is developed to describe the relative motion. This model takes into account the primary gravitational and atmospheric drag perturbations. Then, this model is used in the design of a navigation, guidance, and control system of a chaser vehicle to approach towards and to depart from a target vehicle in proximity operations. Relative navigation uses an extended Kalman filter based on this relative model …

Use Of Single Stage Model Rockets To Teach Some Engineering Principles And Practices To First Year Engineering And Engineering Technology Students, Hüseyin Sarper, Linda Vahala

Electrical & Computer Engineering Faculty Publications

Model rocketry has been called miniature astronautics; a technology in miniature, a hobby, a sport, a technological recreation, an educational tool, and it is all of these things. This paper will describe student projects using model rockets and engines to learn engineering principles for launching rockets and determining the apogee. Model rocketry is a powerful tool for instructors who wish to incorporate science, technology, engineering, and mathematics into a fun, engaging, and challenging activity for first year engineering students. The apogee can be determined using four distinct methods: trigonometry using hand held angle measuring tools, onboard altimeter devices, analytical calculations …

Uncertainty Estimates And Prediction Interval Development For Internal Strain Gage Balance Calibration Systems, Kenneth G. Toro

Mechanical & Aerospace Engineering Theses & Dissertations

Currently, there is a lack of the use of mathematically rigorous methods to evaluate the performance of multivariate force measurement systems. The specific problem addressed in the research stems from the practical issues faced by test engineers when wind tunnel models with internal strain gage balances are readied for test. Check loads are applied and the question that needs to be answered is whether or not the balance is reading within acceptable limits. These systems tend to be difficult to characterize uncertainty, primarily due to their multivariate nature, but also due to the desire for an estimate on the explanatory …

Vessel Traffic Service As A Maritime Security Tool : Vessel Traffic Management Information Systems (Vtmis) In Ghana, Joseph Akwasi Kuma

World Maritime University Dissertations

The dissertation is an assessment of the role of the VTMIS in enhancing efforts to bring down maritime security in the threats in the Gulf of Guinea in West Africa focusing on Ghana. According to the International Maritime Organisation (IMO), Vessel Traffic Service (VTS) is implemented by a Competent Authority to improve the safety and efficiency of vessel traffic and to protect the environment. Technological development today has led to significant improvements in vessel traffic service. Vessel Traffic Management Information Service is the integration of Management information systems to improve the quality of vessel traffic services. Vessel traffic services essentially …

A Study On The Effects Of E-Navigation On Reducing Vessel Accidents, Sun-Bae Hong

World Maritime University Dissertations

The dissertation aims to evaluate how and to what extent e-navigation contributes to reducing accidents for SOLAS ships as well as non-SOLAS ships, hoping that the results are referred to IMO Member States when they are implementing enavigation along with the maritime sectors such as shipping companies, crews on board ships and manufactures developing e-navigation related systems. The study focuses on the potential effects of e-navigation based on tool kits of the IMO e-navigation for SOLAS ships and services of SMART-navigation, which is the Korean approach to implementing the e-navigation concept for both SOLAS ships and non-SOLAS ships. The processes …

Terrain Referenced Navigation Using Sift Features In Lidar Range-Based Data, Matthew T. Leines

Theses and Dissertations

The use of GNSS in aiding navigation has become widespread in aircraft. The long term accuracy of INS are enhanced by frequent updates of the highly precise position estimations GNSS provide. Unfortunately, operational environments exist where constant signal or the requisite number of satellites are unavailable, significantly degraded, or intentionally denied. This thesis describes a novel algorithm that uses scanning LiDAR range data, computer vision features, and a reference database to generate aircraft position estimations to update drifting INS estimates. The algorithm uses a single calibrated scanning LiDAR to sample the range and angle to the ground as an aircraft …

Multi-Objective Trajectory Optimization Of A Hypersonic Reconnaissance Vehicle With Temperature Constraints, Tadeusz J. Masternak

Theses and Dissertations

Temperature-constrained optimal trajectories for a scramjet-based hypersonic reconnaissance vehicle were generated by developing an optimal control formulation and solving it using a variable order Gauss-Radau quadrature collocation method. The vehicle was assumed to be an air-breathing reconnaissance aircraft that has specified takeoff/landing locations, airborne refueling constraints, specified no-fly zones, and specified targets for sensor data collections. The aircraft model included fight dynamics, aerodynamics, and thermal constraints. This model was incorporated into an optimal control formulation that includes constraints on both the vehicle as well as mission parameters, such as avoidance of no-fly zones and coverage of high-value targets. Optimal trajectories …

Hot Streak Characterization In Serpentine Exhaust Nozzles, Darrell S. Crowe

Theses and Dissertations

Modern aircraft of the United States Air Force face increasingly demanding cost, weight, and survivability requirements. Serpentine exhaust nozzles within an embedded engine allow a weapon system to fulfill mission survivability requirements by providing denial of direct line-of-sight into the high-temperature components of the engine. Recently, aircraft have experienced material degradation and failure along the aft deck due to extreme thermal loading. Failure has occurred in specific regions along the aft deck where concentrations of hot gas have come in contact with the surface causing hot streaks. The prevention of these failures will be aided by the accurate prediction of …

Optimal Collision Avoidance Trajectories For Unmanned/Remotely Piloted Aircraft, Nathan E. Smith

Theses and Dissertations

The post-911 environment has punctuated the force-multiplying capabilities that Remotely Piloted Aircraft (RPA) provides combatant commanders at all echelons on the battlefield. Not only have unmanned aircraft systems made near-revolutionary impacts on the battlefield, their utility and proliferation in law enforcement, homeland security, humanitarian operations, and commercial applications have likewise increased at a rapid rate. As such, under the Federal Aviation Administration (FAA) Modernization and Reform Act of 2012, the United States Congress tasked the FAA to provide for the safe integration of civil unmanned aircraft systems into the national airspace system (NAS) as soon as practicable, but not later …

Cloud-Induced Uncertainty For Visual Navigation, Alyssa N. Gutierrez

Theses and Dissertations

This research addresses the numerical distortion of features due to the presence of clouds in an image. The research aims to quantify the probability of a mismatch between two features in a single image, which will describe the likelihood that a visual navigation system incorrectly tracks a feature throughout an image sequence, leading to position miscalculations. First, an algorithm is developed for calculating transparency of clouds in images at the pixel level. The algorithm determines transparency based on the distance between each pixel color and the average pixel color of the clouds. The algorithm is used to create a dataset …

Identification Of Hydrodynamic Forces Developed By Flapping Fins In A Watercraft Propulsion Flow Field, Erdem Aktosun

LSU New Orleans Theses and Dissertations

In this work, the data analysis of oscillating flapping fins is conducted for mathematical model. Data points of heave and surge force obtained by the CFD (Computational Fluid Dynamics) for different geometrical kinds of flapping fins. The fin undergoes a combination of vertical and angular oscillatory motion, while travelling at constant forward speed. The surge thrust and heave lift are generated by the combined motion of the flapping fins, especially due to the carrier vehicle’s heave and pitch motion will be investigated to acquire system identification with CFD data available while the fin pitching motion is selected as a function …

Modal Characterization And Structural Dynamic Response Of A Crane Fly Forewing, Jose E. Rubio

LSU New Orleans Theses and Dissertations

This study describes a method for conducting the structural dynamic analysis of a crane fly (family Tipulidae) forewing under different airflow conditions. Wing geometry is captured via micro-computed tomography scanning. A finite element model of the forewing is developed from the reconstructed model of the scan. The finite element model is validated by comparing the natural frequencies of an elliptical membrane with similar dimensions of the crane fly forewing to its analytical solution. Furthermore, a simulation of the fluid-structure interaction of the forewing under different airflows is performed by coupling the finite element model of the wing with a …

Development Of Long Endurance Small Unmanned Aerial System, Andreas Quainoo

Honors Theses

The purpose of this Senior Design Project is to design, build, and test an Unmanned Aerial System (UAS). This will be used as a test platform for airborne electronics. The intended capabilities of this project include a 12-hour flight time, the ability to carry 5 lbs of payload, and the ability to recharge the batteries of electronics while in the air. With these parameters in mind, the focus of the design was on endurance, and, by extension, efficiency and durability. Upon completion, the aircraft and its onboard systems was constructed and evaluated. Secondary products of this project include an instrumented …

An Unstandard Way Of Using The Cubesat Standard, Robert J. Twiggs, Amin Djamshidpour, Steward Davis, Ben Malphrus

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs, Amin Djamshidpour, Steward Davis, and Ben Malphrus titled  "An Unstandard way of Using the CubeSat Standard" from November 8, 2014.

Generating Technical Data For Strategic Source Of Repair (Ssor) & Source Of Repair Assignment Process (Sorap), Brent A. Carlsen

Space Dynamics Laboratory Publications

SDL Presentation on SSOR and SORAP Technical Data

Heat Transfer Enhancement And Applications Of Femtosecond Laser Processed Metallic Surfaces, Corey M. Kruse

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In the present work, functionalized 304 stainless steel metallic surfaces were created with the use of a Femtosecond Laser Surface Processing (FLSP) technique. The laser processing technique produces self-organized micro/nanostructures on the surface. The heat transfer performance of various FLSP functionalized surfaces were characterized through pool boiling and Leidenfrost experiments. Enhancement in both the nucleate and film boiling heat transfer were observed through an increase of the critical heat flux and heat transfer coefficient as well as shifts in the Leidenfrost temperature respectively. For both experiments, a polished reference sample was used as a baseline line to compare against the …

Proof Of Concept Test For Dual-Axis Resonant Phase-Locked Excitation (Phlex) Fatigue Testing Method For Wind Turbine Blades, Jenna Austin Beckwith

Doctoral Dissertations and Master's Theses

The installed capacity of wind turbines has grown steadily for the past decade with wind energy now providing 3.6-percent of the U.S.’s electricity supply [13]. This trend can be attributed to advancements in wind turbine technology and the ability to increase wind turbine sizes. As wind turbines grow in size, so do the loads experienced by the turbine. One of the most significant load increases is in the lead-lag direction of the wind turbine blades. The increase in lead-lag load is due to the increase in weight of the larger blades. Current wind turbine blades have lead-lag and flapwise loads …

Flow Compressibility Effects Around An Open-Wheel Racing Car, J. Keogh, G. Doig, S. Diasinos

Aerospace Engineering

A numerical investigation has been conducted into the influence of flow compressibility effects around an open-wheeled racing car. A geometry was created to comply with 2012 F1 regulations. Incompressible and compressible CFD simulations were compared-firstly with models which maintained Reynolds number as Mach number increased, and secondly allowing Mach number and Reynolds number to increase together as they would on track. Results demonstrated significant changes to predicted aerodynamic performance even below Mach 0·15. While the full car coefficients differed by a few percent, individual components (particularly the rear wheels and the floor/ diffuser area) showed discrepancies of over 10% at …

On The Interaction Of A Racing Car Front Wing And Exposed Wheel, S. Diasinos, G. Doig, T.J. Barber

Aerospace Engineering

A numerical investigation of generic open-wheel racing car wing and wheel geometry has been conducted, using original sub-scale experimental data for validation. It was determined that there are three main interactions that may occur, identifiable by the path that the main and secondary wing vortices take around the wheel. Interaction ‘A’ occurs when the main and secondary wing vortices both travel outboard of the wheel; interaction ‘B’ is obtained when only the main wing vortex passes inboard of the wheel; while interaction ‘C’ sees both wing vortices travel inboard of the wheel. The different interactions are achieved when geometric changes …

Numerical And Experimental Investigation Of Variable Transportation Cooling For Reusable Thermal Protection Systems, Stefano Gulli

Mechanical and Aerospace Engineering Dissertations - Archive

This research work is focused on the numerical and experimental investigation of the transpiration cooling technique for reusable thermal protection systems. The transpiration cooling has been considered because of its higher cooling effectiveness, with respect to other active cooling techniques, in terms of minimum amount of coolant to be used and minimum interference to the external flow. An innovative approach based on the coupling of the hypersonic boundary layer with the thermal response of porous materials is used to numerically study the thermal management potential of the transpiration cooling technique. The new concept of the variable transpiration is introduced by …

Cold Flow Performance Of A Ramjet Engine, Harrison G. Sykes

Master's Theses

The design process and construction of the initial modular ramjet attachment to the Cal Poly supersonic wind tunnel is presented. The design of a modular inlet, combustor, and nozzle are studied in depth with the intentions of testing in the modular ramjet. The efforts undertaken to characterize the Cal Poly supersonic wind tunnel and the individual component testing of this attachment are also discussed. The data gathered will be used as a base model for future expansion of the ramjet facility and eventual hot fire testing of the initial components. Modularity of the inlet, combustion chamber, and nozzle will allow …

A Pareto-Frontier Analysis Of Performance Trends For Small Regional Coverage Leo Constellation Systems, Christopher Alan Hinds

Master's Theses

As satellites become smaller, cheaper, and quicker to manufacture, constellation systems will be an increasingly attractive means of meeting mission objectives. Optimizing satellite constellation geometries is therefore a topic of considerable interest. As constellation systems become more achievable, providing coverage to specific regions of the Earth will become more common place. Small countries or companies that are currently unable to afford large and expensive constellation systems will now, or in the near future, be able to afford their own constellation systems to meet their individual requirements for small coverage regions.

The focus of this thesis was to optimize constellation geometries …

Experiment And Simulation Of The Acoustic Signature Of Fatigued-Cracked Gears In A Two-Stage Gearbox, Matthew James Ostiguy

Master's Theses

This thesis focuses on the development of a health monitoring system for gearbox transmissions. This was accomplished by developing and understanding a two-stage gearbox computer model that emulates an actual gearbox test rig. The computer model contains actual gearbox geometry, flexible shafts, bearings, gear contact forces, input motor torque, output brake torque, and realistic gearbox imbalance. The gear contact force of each gear stage and the input bearing translational acceleration were the main outputs compared between a healthy gearbox and damaged gearbox computer model. The damage of focus was a fatigue crack on the input pinion gear. A sideband energy …

Vision-Aided Navigation For Gps-Denied Environments Using Landmark Feature Identification, Tennyson Samuel John

Doctoral Dissertations and Master's Theses

In recent years, unmanned autonomous vehicles have been used in diverse applications because of their multifaceted capabilities. In most cases, the navigation systems for these vehicles are dependent on Global Positioning System (GPS) technology. Many applications of interest, however, entail operations in environments in which GPS is intermittent or completely denied. These applications include operations in complex urban or indoor environments as well as missions in adversarial environments where GPS might be denied using jamming technology.

This thesis investigate the development of vision-aided navigation algorithms that utilize processed images from a monocular camera as an alternative to GPS. The vision-aided …

Development Of An Exteroceptive Sensor Suite On Unmanned Surface Vessels For Real-Time Classification Of Navigational Markers, Christopher Lloyd Kennedy

Doctoral Dissertations and Master's Theses

This thesis presents the development of an exteroceptive sensor suite for real-time detection and classification of navigational markers on Unmanned Surface Vessels. Three sensors were used to complete this task: a 3D LIDAR and two visible light cameras. First, all LIDAR points were transformed from the sensor’s reference frame to the local frame using a Kalman filter to estimate instantaneous vehicle pose. Next, objects were chosen from the LIDAR data to be classified using either Multivariate Gaussian or Parzen Window Classifiers. Both produce 96% accuracy or better, however, multivariate Gaussian ran considerably faster than the Parzen and was simpler to …

Design And Dynamic Analysis Of A Variable-Sweep, Variable-Span Morphing Uav, Nirmit Prabhakar

Doctoral Dissertations and Master's Theses

Morphing wings have the potential to optimize UAV performance for a variety of flight conditions and maneuvers. The ability to vary both the wing sweep and span can enable maximum performance for a diverse range of flight regimes. For example, low-speed missions can be optimized using a wing with high aspect ratio and no wing sweep whereas high-speed missions are optimized with low aspect ratio wings and large wing sweep. Different static morphing wing configurations clearly result in varying aerodynamics and, as a result, varying dynamic modes. Another important consideration, however, is the transient dynamics that occur when transitioning between …