Aerospace Engineering Commons^™

Design And Investigation Of Vitiated-Air Heater For Oblique Detonation-Wave Engine, Matthew M. Hoban

Honors Undergraduate Theses

A facility was designed to provide high-enthalpy, hypersonic flow to a detonation chamber. Preliminary investigation identified 1300 K and Mach 5 as the total temperature and Mach number require to stabilize an oblique detonation wave inside the detonation chamber. Vitiated-air heating was the preheating method chosen to meet these capabilities. The vitiator facility heats compressed air while still retaining about 50% of the original oxygen content. Schlieren flow visualization and conventional photography was performed at the exit plane of a choke plate, which simulated the throat of a converging-diverging nozzle. A shock diamond formation was observed within the jet exhausting …

Flame-Turbulence Interaction For Deflagration To Detonation, Jessica Chambers

Honors Undergraduate Theses

Detonation is a high energetic mode of pressure gain combustion that exploits total pressure rise to augment high flow momentum and thermodynamic cycle efficiencies. Detonation is initiated through the Deflagration-to-Detonation Transition (DDT). This process occurs when a deflagrated flame is accelerated through turbulence induction, producing shock-flame interactions that generate violent explosions and a supersonic detonation wave. There is a broad desire to unravel the physical mechanisms of turbulence induced DDT. For the implementation of efficient detonation methods in propulsion and energy applications, it is crucial to understand optimum turbulence conditions for detonation initiation. The study examines the role of turbulence-flame …

Structural Design Of Liquid Oxygen/Liquid Methane Robotic Lander Janus, Mariana Chaidez

Open Access Theses & Dissertations

As the attempt to send humans to Mars has gained momentum in the last decade, the need to find alternative propellants that are safer, less toxic, and yields a better performance has become apparent [1]. Liquid methane and oxygen have emerged as a suitable alternative. In addition, the incorporation of liquid methane/liquid oxygen into the propulsion system has demonstrated an increase in engine performance, as well as a reduction in the volume, size and complexity of the propulsion system. In an attempt to further understand the technologies that are possible to develop using liquid oxygen (LO2) and liquid methane (LCH4), …

Uncertainty Quantification Applied To The Analysis And Design Of A Hypersonic Inflatable Aerodynamic Decelerator For Spacecraft Reentry, Andrew J. Brune

Doctoral Dissertations

"The primary objective of this research is to investigate the uncertainty in the multidisciplinary analysis of a Hypersonic Inflatable Aerodynamic Decelerator configuration for Mars entry, subject to uncertainty sources in the high-fidelity computational models and the operating conditions. Efficient uncertainty quantification methods based on stochastic expansions are applied to the analysis of the hypersonic flowfield, fluid-structure interaction, and flexible thermal protection system response of a deformable inflatable decelerator. Uncertainty analysis is first applied to the hypersonic flowfield simulations to quantify the uncertainty in the surface convective and radiative heat flux, pressure, and shear stress of a fixed inflatable decelerator, subject …

Bayesian Inference For Dynamic Pose Estimation Using Directional Statistics, Jacob E. Darling

Doctoral Dissertations

"The dynamic pose of an object, where the object can represent a spacecraft, aircraft, or mobile robot, among other possibilities, is defined to be the position, velocity, attitude, and angular velocity of the object. A new method to perform dynamic pose estimation is developed that leverages directional statistics and operates under the Bayesian estimation framework, as opposed to the minimum mean square error (MMSE) framework that conventional methods employ. No small attitude uncertainty assumption is necessary using this method, and, therefore, a more accurate estimate of the state can be obtained when the attitude uncertainty is large.

Two new state …

Effects Of Altitude On Monarch Butterfly Aerodynamics, Brittany Greene

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Integrating Cobots In Engineering Technology Education, Ana M. Djuric, Vukica Jovanovic, Tatiana V. Goris, Otilia Popescu

Engineering Technology Faculty Publications

Collaborative robots or CoBots, unlike traditional robots, are safe and flexible enough to work harmoniously with humans. Exploiting the efficiency of automated operations and the flexibility of manual operations in one process can improve productivity and worker job satisfaction. CoBots technology has been experiencing strong growth in different areas such as ground transportation, food-processing industry, car manufacturing, and naval or aeronautical engineering. Current CoBots education and training opportunities are rare or non-existent in university environments. In response to this need, we developed several CoBots modules which will be integrated in the current robotics and mechatronics courses. In this paper we …

Modeling Of Reliability And Performance Assessment Of A Dissimilar Redundancy Actuation System With Failure Monitoring, Wang Shaoping, Cui Xiaoyu, Shi Jian, Mileta M. Tomovic, Jiao Zongxia

Engineering Technology Faculty Publications

Actuation system is a vital system in an aircraft, providing the force necessary to move flight control surfaces. The system has a significant influence on the overall aircraft performance and its safety. In order to further increase already high reliability and safety, Airbus has implemented a dissimilar redundancy actuation system (DRAS) in its aircraft. The DRAS consists of a hydraulic actuation system (HAS) and an electro-hydrostatic actuation system (EHAS), in which the HAS utilizes a hydraulic source (HS) to move the control surface and the EHAS utilizes an electrical supply (ES) to provide the motion force. This paper focuses on …

Constant Velocity Combustion Scramjet Analysis, Lakshmi Srikanth Tiruveedula

Electronic Theses and Dissertations

The supersonic combustion ramjet or scramjet, is the most suitable engine cycle for sustained hypersonic flight in the atmosphere. The present work deals with the performance of a scramjet engine by parametrically analyzing the performance of the ideal scramjet using the engine parameters: specific thrust, fuel-to-air ratio, thrust specific fuel consumption, thermal efficiency, propulsive efficiency, overall efficiency and thrust flux. The objective of the work is to determine the desirable performance terms of the ideal scramjet, by varying three different candidate fuels and three different candidate materials for the combustion chamber. The engine parameters are related by the lower heating …

Guided Wave Inspection Of Cracks In The Rivet Hole Of An Aerospace Lap Joint Using Analytical-Fem Approach, Md Yeasin Bhuiyan

Theses and Dissertations

Ultrasonic guided waves are very attractive for the inspection of large structures using nondestructive evaluation (NDE) and structural health monitoring (SHM) technique. Combined analytical and finite element analysis (CAFA) has been introduced for the detection of butterfly cracks in the rivet hole of the aerospace lap joint. Finite element analyses have been performed on the local damage area in spite of the whole large structure. Fundamental Lamb wave modes (S0 and A0) have been strike on the local damage from multiple directions to analyze the cracks of multiple-rivet-hole lap joint. The rivet hole cracks (damage) in the plate structure gives …

Investigation And Development Of Friction Stir Welding Process For Unreinforced Polyphenylene Sulfide And Reinforced Polyetheretherketone, Hossain Ahmed

Theses and Dissertations

The joining of thermoplastics through welding, a specific form of fusion bonding, offers numerous advantages over mechanical joining. It eliminates the use of costly fasteners and has only a limited effect on the strength of the parts being joined since it does not require the introduction of holes and loading pins, and it does not create significant stress concentrations. A specific form of welding, Friction Stir Welding, was investigated for the creation of butt joints of unreinforced polyphenylene sulfide (PPS) and short carbon fiber reinforced polyetheretherketone (PEEK) plates. Friction stir welding requires a rotating pin, a shoulder arrangement, relative movement …

Strategic Deconfliction Of 4d Trajectory And Perturbation Analysis For Air Traffic Control And Automation System, Xinmin Tang, Yu Zhang, Ping Chen, Bo Li, Songchen Han

Civil and Environmental Engineering Faculty Publications

Strategic 4D trajectory conflict-free planning is recognized as one of the core technologies of next-generation air traffic control and automation systems. To resolve potential conflicts during strategic 4D conflict-free trajectory planning, a protection-zone conflict-control model based on air traffic control separation constraints was proposed, in which relationships between expected arrival time and adjusted arrival time at conflicting waypoints for aircraft queues were built and transformed into dynamic linear equations under the definition of max-plus algebra. A method for strategic deconfliction of 4D trajectory was then proposed using two strategies: arrival time adjustment and departure time adjustment. In addition, departure time …

An Imu-Based Spacecraft Navigation Architecture Using A Robust Multi-Sensor Fault Detection Scheme, Samuel J. Haberberger

Masters Theses

"Redundant sensor networks of inertial measurement units (IMUs) provide inherent robustness and redundancy to a navigation solution obtained by dead reckoning the fused accelerations and angular velocities sensed by the IMU. However, IMUs have been known to experience faults risking catastrophic mission failure creating large financial setbacks and an increased risk of human safety. Different fusion methods are analyzed for a multi-sensor network using cost effective IMUs, including direct averaging and covariance intersection. Simulations of a spacecraft in low Earth orbit are used to baseline a typical expensive IMU and compare the navigation solution obtained from a network of several …

Thrust Sensing For Small Uavs, Christopher Scott Marchman

Masters Theses

"Unmanned aerial vehicles (UAVs) have become prevalent in both military and civilian applications. UAVs have many size categories from large-scale aircraft to micro air vehicles. The performance, health, and efficiency for UAVs of smaller sizes can be difficult to assess and few associated instrumentation systems have been developed. Thrust measurements on the ground can characterize systems especially when combined with simultaneous motor power measurements. This thesis demonstrates the use of strain measurements to measure the thrust produced by motor/propeller combinations for such small UAVs. A full-bridge Wheatstone circuit and electrical resistance strain gauges were used in conjunction with constant-stress cantilever …

Intensity Control Of Dielectric Barrier Discharge Filaments, Matthew Crawford Paliwoda

Masters Theses

"When operated in a filamentary mode, a volume dielectric barrier discharge (DBD) is known to produce patterned plasma structures. These structures are currently being explored for reconfigurable metamaterial applications. In this work the presence and intensity of a single filament, within an array of filaments, was controlled by adjusting the voltage to that filament's individual needle electrode. The current, voltage, and time-averaged normalized light intensity were measured while varying the voltage of the needle through a self-biasing resistance. For a 7.5 kV, 3.2 kHz DBD in air, the needle-controlled filament intensity varies from that of the surrounding filaments to zero …

A Linear Matrix Inequality-Based Approach For The Computation Of Actuator Bandwidth Limits In Adaptive Control, Daniel Robert Wagner

Masters Theses

"Linear matrix inequalities and convex optimization techniques have become popular tools to solve nontrivial problems in the field of adaptive control. Specifically, the stability of adaptive control laws in the presence of actuator dynamics remains as an important open control problem. In this thesis, we present a linear matrix inequalities-based hedging approach and evaluate it for model reference adaptive control of an uncertain dynamical system in the presence of actuator dynamics. The ideal reference dynamics are modified such that the hedging approach allows the correct adaptation without being hindered by the presence of actuator dynamics. The hedging approach is first …

Characterization Of Electric Solid Propellant Pulsed Microthrusters, Matthew Scott Glascock

Masters Theses

"Electric solid propellants are an attractive option for space propulsion because they are ignited by applied electric power only. In this work, the behavior of pulsed microthruster devices utilizing such a material is investigated. These devices are similar in function and operation to the pulsed plasma thruster, which typically uses Teflon as propellant. A Faraday probe, Langmuir triple probe, residual gas analyzer, pendulum thrust stand and high speed camera are utilized as diagnostic devices. These thrusters are made in batches, of which a few devices were tested experimentally in vacuum environments. Results indicate a plume electron temperature of about 1.7 …

Structural Health Monitoring Of Composite Overwrapped Pressure Vessels, Luca Letizia

Honors Undergraduate Theses

This work is focusing to study the structural behavior of Composite Overwrapped Pressure Vessels (COPVs). These COPVs are found in many engineering applications. In the aerospace field, they are installed onto spaceships and aid the reorientation of the spacecraft in very far and airless, therefore frictionless, orbits to save energy and fuel. The intent of this research is to analyze the difference in performance of both perfectly intact and purposely damaged tanks. Understanding both the source and location of a structural fault will help NASA engineers predict the performance of COPVs subject to similar conditions, which could prevent failures of …

Smart Material Actuation And Morphing For Unmanned Aircraft Systems, Caio H. Da Silva Lima

Honors Undergraduate Theses

The intent of this thesis is to outline the design, analysis, and characterization of an axially compressed piezocomposite actuator and, in particular, to determine the correlation and accuracy of two models used to predict deflection of an axially compressed piezocomposite bimorph. Restrictions in material properties lead to vehicle inefficiencies caused by the discontinuous geometry of deflected control surfaces in unmanned aircraft systems. This performance disadvantage in discrete control surfaces is caused in part by the sharp edges that are formed when the surface is pivoted. Flow continuity over the body of a vehicle is important in minimizing the effects of …

An Experimental Investigation Of Heat Transfer For Arrays Of Impingement Jets Onto The Featured Surfaces With Cylindrical And Elliptical Raised Surfaces, Marc A. Medina

Honors Undergraduate Theses

This study focuses on multi-jet impingement for gas turbine geometries in which the objective is to understand the influence of the roughness elements on a target surface to the heat transfer. Current work has proven that implementing roughness elements for multi-jet impingement target surfaces has increased heat transfer ranging anywhere from 10-30%. This study has chosen to investigate three different roughness elements, elliptical in cross-section, to compare to smooth surface geometries for multi-jet impingement. An experimental was taken for this study to extend the current knowledge of multi-jet impingement geometries and to further understand the heat transfer performance. A temperature …

Conjugate Heat Transfer Analysis Of Combined Regenerative And Discrete Film Cooling In A Rocket Nozzle, Charlotte M. Pearce

Honors Undergraduate Theses

Conjugate heat transfer analysis has been carried out on an 89kN thrust chamber in order to evaluate whether combined discrete film cooling and regenerative cooling in a rocket nozzle is feasible. Several cooling configurations were tested against a baseline design of regenerative cooling only. New designs include combined cooling channels with one row of discrete film cooling holes near the throat of the nozzle, and turbulated cooling channels combined with a row of discrete film cooling holes. Blowing ratio and channel mass flow rate were both varied for each design. The effectiveness of each configuration was measured via the maximum …

Characterization Of Dispersion And Residual Stress In Nanoparticle Reinforced Hybrid Carbon Fiber Composites, Alex Selimov

Honors Undergraduate Theses

Hybrid carbon fiber reinforced composites are a new breed of materials that are currently being explored and characterized for next generation aerospace applications. Through the introduction of secondary reinforcements, such as alumina nanoparticles, hybrid properties including improved mechanical properties and stress sensing capabilities can be achieved. In order to maximize these properties, it is necessary to achieve a homogeneous dispersion of particulate filler. Utilizing the photoluminescent properties of alumina, it is possible to compare local levels of particle concentration through emission intensities as a way to determine the effectiveness of the tested manufacturing parameters in increasing material homogeneity. Parameters of …

Cryogenic Processing Of Al 7050-T7451 Alloy For Improved Surface Integrity, Bo Huang

Theses and Dissertations--Mechanical and Aerospace Engineering

Al 7050-T7451 alloy with good combinations of strength, stress corrosion cracking resistance and toughness, is used broadly in the aerospace/aviation industry for fatigue-critical airframe structural components. However, it is also considered as a highly anisotropic alloy as the crack growth behavior along the short transverse direction is very different from the one in the long transverse direction, due to the inhomogeneous microstructure with the elongated grains distributed in the work material used in the sheet/plate applications. Further processes on these materials are needed to improve its mechanical and material properties and broaden its applications.

The material with ultra-fine or nano …

Comparisons Of Ablator Experimental Performance To Response Modeling And Effects Of Water Phase Transition In Porous Tps Materials, David L. Smith

Theses and Dissertations--Mechanical and Aerospace Engineering

The Mars Science Laboratory Entry Descent and Landing Instrumentation (MEDLI) project performed extensive arc jet tests for development, qualification, and calibration of instrumented heat shield plugs. These plugs each contained several thermocouples for recording near-surface and in-depth temperature response of the Phenolic Impregnated Carbon Ablator (PICA) heat shield. The arc jet test results are entered into a comprehensive database so that broad trends across the test series can be compared. One method of analysis is to compare with ablator material response calculations and solve the in-depth heat conduction equations. Using the near-surface thermocouple measurements as a boundary condition in numerical …

High Temperature Shock Tube Ignition Studies Of Co2 Diluted Mixtures, Owen Pryor

Electronic Theses and Dissertations

Energy demand is expected to grow by 20% over the next 10 years. In order to account for this increase in energy consumption new and novel combustion techniques are required to mitigate the effects of pollution and fossil fuel dependency. Oxy-fuel combustion in supercritical carbon dioxide (sCO2) cycles can increase plant efficiencies up to 52% and reduce pollutants such as NOX and CO2 by 99%. Supercritical engine cycles have demonstrated electricity costs of $121/MWh, which is competitive in comparison to conventional coal ($95.60/MWh) and natural gas power plants ($128.4/MWe). This increase in efficiency is mainly driven by the near-liquid density …

Approximated Control Affine Dynamics Mode For An Agricultural Field Robot Considering Wheel Terrain Interaction, Pablo Menendez-Aponte

Electronic Theses and Dissertations

As populations and the demand for higher crop yields grow, so to does the need for efficient agricultural wheeled mobile robots. To achieve precise navigation through a field it is desirable that the control system is designed based on an accurate dynamic model. In this paper a control affine model for a custom designed skid-steer differential drive wheeled mobile robot is found. The Terramechanic wheel terrain interaction is adopted and modified to consider wheels with a torus geometry. Varying slip ratios and slip angles are considered in the terrain reaction forces, which is curve-fitted using a nonlinear least squares approach …

Kinematical Modelling And Its Analytical Inverse Kinematic Solution For The Handling Mechanism Of An Agricultural Robot, Sinem Gozde Defterli

Electronic Theses and Dissertations

Early detection of the crop diseases helps to prevent failure in the amount and the quality of the production. In agricultural robotics, the idea of a disease detection robot is a fresh and an innovative hot-button topic. The exclusion of the diseased parts from the strawberry plants for further analyses is one of the main tasks of a recently developed strawberry robot. To this purpose, the handling mechanism in the robot needs to achieve an accurate manipulation task to reach the target. Reaching, cutting and storing the diseased leaf are challenging and delicate processes during the procedure of the handling …

Design Optimization Of Sandwich Core, Mohammad Tauhiduzzaman

Open Access Theses & Dissertations

Ultralight sandwich structures comprising of low-density core with stiff facings have attracted significant research interest for their considerable weight saving applications. The aircraft industries are focusing on decreasing the structural mass to lower the manufacturing and operating costs. Design analysis of the sandwich cores using finite element analysis has been developed as a promising concept to feature sandwich structures with maximum strength, stiffness, and reduced weight. To obtain multifunctional behavior of sandwich panels, a profound investigation of geometrical and mechanical properties in the transverse plane is required because it is very susceptible to any kind loadings. Structural optimization is one …

Geometric Consideration Of Nanostructures For Energy Storage Systems, Jonghyun Park, Jie Li, Wei Lu, Ann Marie Sastry

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Battery performance and its fade are determined by various aspects such as the transport of ions and electrons through heterogeneous internal structures; kinetic reactions at the interfaces; and the corresponding interplay between mechanical, chemical, and thermal responses. The fundamental factor determining this complex multiscale and multiphysical nature of a battery is the geometry of active materials. In this work, we systematically consider the tradeoffs among a selection of limiting geometries of media designed to store ions or other species via a diffusion process. Specifically, we begin the investigation by considering diffusion in spheres, rods, and plates at the particle level, …

Ionic And Electronic Conductivities Of Atomic Layer Deposition Thin Film Coated Lithium Ion Battery Cathode Particles, Rajankumar L. Patel, Jonghyun Park, Xinhua Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

It is imperative to ascertain the ionic and electronic components of the total conductivity of an electrochemically active material. A blocking technique, called the “Hebb-Wagner method”, is normally used to explain the two components (ionic and electronic) of a mixed conductor, in combination with the complex ac impedance method and dc polarization measurements. CeO₂ atomic layer deposition (ALD)-coated and uncoated, LiMn₂O₄ (LMO) and LiMn_1.5Ni_0.5O₄ (LMNO) powders were pressed into pellets and then painted with silver to act as a blocking electrode. The electronic conductivities were derived from the currents obtained using …