Aerospace Engineering Commons^™

Effects Of Radiation Reabsorption On The Laminar Flame Speed And No Emission During Aviation Kerosene Combustion At Elevated Pressures, Shu Zheng, Hao Liu, Qing Li, Jiajian Zhu, Mingbo Sun, Bo Zhou, Ran Sui, Qiang Lu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Increasing attention has been paid on combustion stability and pollution emission of aviation kerosene due to the emerging interests on supersonic combustion scramjets. Whereas the vitiation component H2O introduced by hydrogen-fueled heaters in high-enthalpy vitiated air during ground experiments has a considerable influence on kerosene combustion, especially through its radiation effect, which needs to be further investigated. In this paper, the radiation reabsorption effects on laminar flame speeds and NO emissions during RP-3/H2O/O2/N2 combustion was assessed numerically over a wide range of equivalence ratio and pressure (ϕ = 0.7–1.4 and P = 1–15 atm) using detailed chemical and radiation models. …

Full Volume 13, Issue 1, Seyma Tufan

Space and Defense

No abstract provided.

Mitigation Of The Laminar Separation Bubble Using Active Vortex Generators, Hayden Hitt

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Metallization Of Polymers And Composites: State-Of-The-Art Approaches, Ruslan Melentiev, Arief Yudhanto, Ran Tao, Todor Vuchkov, Gilles Lubineau

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Polymers and their composites are widely used for designing structures in aerospace, automotive, electronic, sport industries due to their lightweight, cost, and processing advantages. However, the surface of polymeric materials typically exhibits intrinsic deficiencies, limiting their durability and functionalities, e.g., low wear resistance, low thermal and electrical conductivity, low adhesion, low bioactivity, low reflectiveness, and weak photochemical resistance. Polymer metallization is an emerging concept that addresses these deficiencies by forming a metallic skin on polymeric surfaces. Herein, the working principles, recent advances, challenges, functional capabilities, and applications of the state-of-the-art polymer metallization methods in the fields of additive manufacturing, coating …

In-Situ Measurements Of Temperature And Emissivity During Msw Combustion Using Spectral Analysis And Multispectral Imaging Processing, Shu Zheng, Weiguang Cai, Ran Sui, Zixue Luo, Qiang Lu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

By using a novel multispectral imaging technology, the 2-D distributions of flame temperature and emissivity were measured in a 16 MW incinerator to co-fire municipal solid waste (MSW) and municipal sludge. A way to establish the relationship between the multispectral flame images and the temperature was proposed by combing the Newton iteration method and Hottel emissivity model. The results showed that the measured temperatures at different locations varied by 31.25% with a fixed steam evaporation rate, and 11.76% with different steam evaporation rates at a given port. The temperatures and emissivities decreased at upper locations due to the lower local …

Development Of A Trailing Edge Flap Using A Compliant Mechanism, Matthew Maybee

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Creation And Development Of An Obstacle Database For Uas Pathfinding, Cameron Clarke

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Improved Additive Manufacturing Of Silicon Carbide Parts Via Pressureless Electric Field-Assisted Sintering, Adam Bratten, Ruoyu Chen, Joshua Rittenhouse, Ming-Chuan Leu, Haiming Wen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

High solids loading silicon carbide (SiC)-based aqueous slurries containing only.5 wt. % organic additives were utilized to create specimens of various geometries via an extrusion-based additive manufacturing (AM) technique. Pressure less electric field-assisted sintering was performed to densify each specimen without deformation. The combination of these techniques produced parts with >98% relative density despite containing only 5 wt.% oxide sintering additives. After sintering, specimens contained only the α-SiC and yttrium aluminum perovskite phases. This suggests the evolution of a nonequilibrium yttrium aluminate phase, as well as transformation from β-SiC to α-SiC. The fabrication method presented in this work has advantages …

A Study Of Pressure Probe Response In Steady And Unsteady Flows, Michael T. Charonnat

Master's Theses

The objective of this thesis is two-fold: to analyze the directional calibration of a 3-hole probe in steady flow and to develop a method for the interpretation of measurements recorded with a novel, fast-response Pitot-type probe in unsteady, turbulent flow. Calibration data for the 3-hole probe’s two side ports was taken in the steady, non-turbulent region of a free jet and was evaluated for symmetry. In addition, data that was recorded using one side port in two independent calibration runs was compared to study repeatability. Misalignment was found between the nominally symmetric data sets, which may be the result of …

Additive Manufacturing Of Molybdenum For High Temperature Structural Applications, Megan L. Bustin

Theses and Dissertations

This research considered additive manufactured (AM) molybdenum (Mo) and the effect of three variables on microstructure, mechanical properties, and the relationship between the two. Test temperature, laser speed, and shield gas or build atmosphere were varied, and samples tested and analyzed using a three-point bending test, chemical composition, and optical and scanning electron microscopy. The relationship among variables and results using a Design of Experiments was limited compared to the inclusion of every tested sample. Most effects were expected: samples tested at room temperature were brittle without statistical significance; increasing laser speed resulted in decreased ductility and strain, smaller grain …

Finite Fatigue Life Prediction Of Additively Manufactured Aircraft Engine Turbine Blade With Respect To Internal Defect Size And Location, Daniel G. Miller

Theses and Dissertations

Current fatigue life modeling techniques with respect to defects emphasize the dependence on the defect size with respect to fatigue life, but does not account for the effects of where a defect might be located. This research outlines a process to include defect location into the model analysis for a more precise prediction of the number of cycles to failure and where the finial failure could occur within a component. The focus is on a turbine blade structure using IN718 subjected to a pure vibratory load. The basic model predicts component life using a stress map from the frequency analysis …

Orbit Determination With Event-Based Cameras To Improve Space Domain Awareness, Conor M. Wisentaner

Theses and Dissertations

The objective of this research is to assess the utility of a COTS EBC for SDA applications by evaluating its ability to produce data for orbit updates of resident space objects. Unlike traditional frame-based imaging sensors, the pixels on an EBC activate independently when a change in brightness is detected to produce a continuous data flow on a per pixel basis. This unique functionality provides much higher temporal resolution than traditional frame-based sensors, such that an EBC can generate far more data points from a single observation than a frame-based sensor. However, current COTS EBCs have less spatial resolution than …

Mechanical Properties And Tension-Tension Fatigue Behavior Of A Novel Additively Manufactured Polymer Matrix Composite At Room And Elevated Temperature, Grayson M. Harber

Theses and Dissertations

The tension-tension fatigue behavior of a novel additively manufactured AM carbon fiber reinforced polymer matrix composite was studied. This novel material system consists of T1100 carbon fibers, and a UV photocured resin developed by Continuous Composites and Sartomer. Tensile properties and tension-tension fatigue were investigated for the 090 fiber orientation as well as for the ±45 fiber orientation. Specimens with 0/90 fiber orientation were tested at ambient laboratory temperature 23 °C and at elevated temperature 150 °C, while the specimens with the ±45 fiber orientation were tested only at ambient laboratory temperature. Tension-tension fatigue testing was carried out with a …

Low-Reynolds-Number Locomotion Via Reinforcement Learning, Yuexin Liu

Dissertations

This dissertation summarizes computational results from applying reinforcement learning and deep neural network to the designs of artificial microswimmers in the inertialess regime, where the viscous dissipation in the surrounding fluid environment dominates and the swimmer’s inertia is completely negligible. In particular, works in this dissertation consist of four interrelated studies of the design of microswimmers for different tasks: (1) a one-dimensional microswimmer in free-space that moves towards the target via translation, (2) a one-dimensional microswimmer in a periodic domain that rotates to reach the target, (3) a two-dimensional microswimmer that switches gaits to navigate to the designated targets in …

Effect Of Current Density Ramping On The Anodic Reaction And Morphology Of Aerospace Aluminum Alloys, Peter Totaro Jr.

Dissertations

Aluminum anodizing has been experimented with and studied over the last century because of its ability to form uniform, well ordered cellular coatings on aluminum alloys. Anodizing aerospace alloys has been problematic, due to the alloying elements used to add strength and resistance to stress cracking corrosion. These intermetallic compounds, i.e., copper and zinc, promote oxygen evolution and stress as they accumulate in and on the surface of the forming aluminum oxide. These inclusions lead to increased electrical resistance that forms porous and flawed coating, which can lead to industrial and field failures. The amount of voltage placed on the …

A Network Flow Approach For Constellation Planning, Skylar A. Cox, Greg N. Droge, John H. Humble, Konnor D. Andrews

Space Dynamics Laboratory Publications

A graph-based network flow approach to constellation planning is presented that respects spacecraft resources and mission constraints to arrive at a preliminary operational schedule. The method discretizes task fulfillment opportunity windows into graph nodes and then adds edges based on feasibility of transition between these opportunities, either by slew maneuvers or extended-time task fulfillment during downlink operations. Intelligent graph pruning is applied to improve computation performance and provide a versatile planning capability with a minimal impact on the resulting solution. A network flow formulation allows for a simultaneous search for spacecraft plans using a Mixed Integer Linear Program (MILP). The …

A Deep Learning Approach For Airport Runway Identification From Satellite Imagery, Mahmut Gemici

Theses and Dissertations

The United States lacks a comprehensive national database of private Prior Permission Required (PPR) airports. The primary reason such a database does not exist is that there are no federal regulatory obligations for these facilities to have their information re-evaluated or updated by the Federal Aviation Administration (FAA) or the local state Department of Transportation (DOT) once the data has been entered into the system. The often outdated and incorrect information about landing sites presents a serious risk factor in aviation safety. In this thesis, we present a machine learning approach for detecting airport landing sites from Google Earth satellite …

Rocket Measurements Of Electron Energy Spectra From Earth’S Photoelectron Production Layer, Glyn A. Collinson, Alex Glocer, Dennis Chornay, Robert Mitchell, Rob Pfaff, Tim Cameron, Et. Al.

Publications

Photoelectrons are crucial to atmospheric physics. They heat the atmosphere, strengthen 28 planetary ambipolar electric fields, and enhance the outflow of ions to space. However, 29 there exist only a handful of measurements of their energy spectrum near the peak of 30 photoproduction. We present calibrated energy spectra of pristine photoelectrons at their 31 source by a prototype Dual Electrostatic Analyzer (DESA) instrument flown on July 11 32 2021 aboard the Dynamo-2 sounding rocket (NASA № 36.357). Photopeaks arising from 33 30.4nm He-II spectral line were observed throughout the flight above 120km. DESA also 34 successfully resolved the rarely observed …

Comprehensive Review Of Heat Transfer Correlations Of Supercritical Co2 In Straight Tubes Near The Critical Point: A Historical Perspective, Nicholas C. Lopes, Yang Chao, Vinusha Dasarla, Neil P. Sullivan, Mark Ricklick, Sandra Boetcher

Publications

An exhaustive review was undertaken to assemble all available correlations for supercritical CO2 in straight, round tubes of any orientation with special attention paid to how the wildly varying fluid properties near the critical point are handled. The assemblage of correlations, and subsequent discussion, is presented from a historical perspective, starting from pioneering work on the topic in the 1950s to the modern day. Despite the growing sophistication of sCO2 heat transfer correlations, modern correlations are still only generally applicable over a relatively small range of operating conditions, and there has not been a substantial increase in predictive capabilities. Recently, …

Thoughts On Space Science Development, Yidong Gu

Bulletin of Chinese Academy of Sciences (Chinese Version)

Space science is a large-scale activity by using space vehicles to explore the universe and natural laws and carry out special experiments, which has made great contributions to the development of contemporary science. This paper outlines the major breakthroughs in international space science, analyzes the context and new trends of space science and manned exploration activities, reviews the development achievements of space science in China in the past 20 years, puts forward existing problems and gaps, and emphasizes the strategic position of space science and its importance to China's science and technology, aerospace and the national long-term development. It is …

Prospects Of Global Space Science Breakthroughs And China’S Contributions, Chi Wang

Bulletin of Chinese Academy of Sciences (Chinese Version)

Space science is a frontier interdisciplinary subject that probes the macroscopic and microscopic worlds with spacecraft as a platform. Since the 1960s, many Nobel Prize-level discoveries and original achievements have been spawned in related basic science, breaking through the boundaries of human cognition of the nature, and expanding the human knowledge graph continuously. In the 21st century, with a new round of scientific and technological revolution brewing, space science has also entered a new era of revolutionary advancements. Here we review the major progress in global space science in the past ten years, as well as the trend of space …

Connecting The Last Mile To Speed Up Space Science Development Of China—Review And Prospect Of The Funding Practices For Space Science By Nsfc, Zengqian Hou, Yupeng Yao, Guoxuan Dong, Sheng Yu

Bulletin of Chinese Academy of Sciences (Chinese Version)

Strengthening the basic scientific research in an all-round way and achieving more breakthroughs from zero to one as soon as possible are the major strategic needs of building a world leading power in science and technology in the new era. As the main channel funding basic research in China, the National Natural Science Foundation of China (NSFC) has always focused on the basic frontiers and major scientific issues in space science, carried out strategic research on the planning of relevant disciplines, sorted out key scientific questions, defined the priority development direction, and provided continuous and stable funding through major, key, …

Review On 11 Years Of Implementation Of Strategic Priority Program (Spp) On Space Science And Its Prospect, Ji Wu, Chi Wang, Quanlin Fan

Bulletin of Chinese Academy of Sciences (Chinese Version)

The Strategic Priority Program (SPP) on space science is a series scientific satellites program implemented by Chinese Academy of Science (CAS) since 2011. Since then, it has become the only and systematic space science satellite series of China. The article reviews the major scientific outcomes and technological breakthroughs in its first phase (2011-2016), the ongoing mission developments of its second phase (2017-2024), and the selected mission proposals for future space science program up to 2030. In 2016, President Xi has addressed:"to promote full developments of space science, space technology and space application," where he put space science in the first …

On Index System Of Space Science Strength And Its Enlightenment, Quanlin Fan, Tingting Song, Peng Shi, Haiyan Wei, Xiaoli Chen, Xuezhao Wang, Shijie Guo

Bulletin of Chinese Academy of Sciences (Chinese Version)

Major achievements of space science and technology are important symbols of a country's scientific and technological level and ability. The basic consensus of the aerospace community is that China's space technology has been well-developed, space applications need to be strengthened, and space science is relatively the less-developed. Thus, it is extremely urgent for China to build a strong country in space science and tackle the "bottleneck". Here we elaborate the internal logic among the strength of S&T, aerospace, and space science, expound the connotation of space science strength, investigate the index system, and suggest the three-tier system scientifically for the …

Mission Operations, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

Overview

• In review – CONOPS

• Mission Planning

• Anomaly Resolution

• Miscellaneous, but important considerations

• Looking forward

Collaborative Research: Harnessing Mechanics For The Design Of All-Solid-State Lithium Batteries, Haoran Wang

Funded Research Records

No abstract provided.

Disk Engine With Circumferential Swirl Radial Combustor, Brian Bohan, Marc Polanka, Bennett Staton

AFIT Patents

A disk engine and system configured to provide high power at a reduced axial length is disclosed herein. The disk engine includes a radial compressor, a compressor discharge manifold positioned circumferentially about compressor, a combustion chamber positioned within the discharge manifold and a radial turbine positioned radially inward of the combustion chamber.

Experiments To Mitigate Flow Recirculation In A Closed Anechoic Chamber Using Mesh Screens As Turbulence Suppressors, Tori Kay Wolverton

Theses and Dissertations

The desire to gather acoustic data of a propeller in simulated hover without environmental effects is met with the challenge of recirculating flow in a closed anechoic chamber. Flow recirculation in an anechoic chamber is not ideal because the effects of it being ingested by the rotor cause unsteady loadings on the propeller. This unsteady loading causes vortex noise from the turbulence introduced by the recirculation of the flow. The aim is to study the acoustic signature of a propeller separate from external factors and engine noise. Two different propellers with three different screen combinations were tested in a closed …

Three-Axis Magnetometer Calibration With Norm Preservation, Seth Lichlyter

Theses and Dissertations

This thesis proposes a set of methods for the purpose of improving the calibration of three-axis magnetometers. Specifically, these methods aim to improve the accuracy of the bias estimation methods currently in use. The first proposed method utilizes a constrained optimization problem based on norm preserving. The second proposed method finds the same bias estimate as the first method, but in a computationally more efficient manner. The last proposed method tackles the case where the value of the local geomagnetic field is only imprecisely known. Computer simulations demonstrate the viability of the proposed methods.

Ground Support Equipment (Gse) Eat, Utah State University Space Dynamics Laboratory

Space Dynamics Laboratory Publications

About this Presentation

• This presentation was developed as a “taste” of the area of GSE
• There are lots of resources that can be found about GSE and how it should be used
• While I have tried to cover a lot of ground in this presentation, the GSE required for your mission will vary depending on your application
• My intent is to start the thinking process of how to design, develop, and execute GSE elements of your program so that you have a successful mission