Delayed-Bang Approach Towards More Sustainable Critical Infrastructure Risk Management,
2011
Old Dominion University
Delayed-Bang Approach Towards More Sustainable Critical Infrastructure Risk Management, C. Ariel Pinto, Michael K. Mcshane, Abhishek S. Pathak
Finance Faculty Publications
This article describes the Delayed Bang Approach for determining the value of risk management alternatives in critical infrastructure security. The discussion includes (1) the need for sustainable risk management (2) the importance of time valuation in evaluating competing loss prevention and loss reduction alternatives, (3) the convergence of deterministic engineering economics, survivability analysis, and probabilistic analysis, and (4) hypothetical examples of the Delayed-Bang Approach and significance towards more sustainable risk management.
Illicit Trafficking Of Radioactive Sources: Experiences With Fake Materials In Tanzania,
2010
Tanzania Atomic Energy Commission, Arusha
Illicit Trafficking Of Radioactive Sources: Experiences With Fake Materials In Tanzania, Iddi Mkilaha
Tanzania Journal of Engineering and Technology (TJET)
Radioactive materials although are very useful, they are one of the catastrophic sources of mass destruction if misused. These materials have a number of positive uses which makes them very essential in our modern society. Incidences such as the bombings of the US Embassies in East Africa, the September 11, and many others had formed a basis for international responsive actions to control illicit trafficking of Radioactive and Nuclear Materials. The aim of this work is to track the movements and subsequently uses of these materials. Tanzania is one of the countries where International Nuclear Safeguards protocols are fully operational …
Analysis Of Factors Affecting Technological Innovativeness In Engineering Enterprises In Tanzania,
2010
Department of Mechanical and Industrial Engineering, College of Engineering and Technology, University of Dar es Salaam, P.O. Box 35131, Dar es Salaam
Analysis Of Factors Affecting Technological Innovativeness In Engineering Enterprises In Tanzania, Emanuel Mjema
Tanzania Journal of Engineering and Technology (TJET)
This paper discusses the technological innovativeness in engineering enterprises in Tanzania and analyses the factors affecting the innovativeness. It starts by analyzing various concepts regarding innovation, then analyzed from documentary review factors affecting innovativeness and then analyzed the innovativeness in Tanzanian enterprises. From the documentary review it was learnt that the following key factors influence technological innovativeness: Existence of innovation management; Existence of market to absorb the products of innovation; Existence of partnership between the universities and the firms; Existence of positive culture and politics towards innovation; The government playing its role to influence innovation; Existence of the right knowledge; …
Construction Cost Models,
2010
New England Environmental Finance Center
Construction Cost Models, Barry Dikeman
Economics and Finance
The following are a series of cost estimate models similar in format to a typical engineer’s estimate that were developed in support of our financial impact assessment report for LD 1725. The models us current material costs, labor costs, and equipment costs for the region to provide a comparative cost analysis of seven culvert replacement scenarios. The models provide information about what the cost impact of LD 1725 would be for typical culvert replacements in Maine. However, due to the inherent restrictions of the cost modeling framework we were not able to include the abundance of variables that would be …
Post-Project Risk Perception And Systems Management Reaction,
2010
Old Dominion University
Post-Project Risk Perception And Systems Management Reaction, Baqer Alali
Engineering Management & Systems Engineering Theses & Dissertations
The objective of this research is to identify whether risk management in projects has any role in risk management in systems. Projects, systems, and risk management are three integral concepts in the management of various enterprises and agencies. Risk management is a common concept in systems and project processes. To avoid failures or crisis during their life cycles, projects and systems managers practice risk management. Projects and systems have well defined life cycles during which the risk is defined, controlled, and managed. Risk management is conducted in each phase of projects and systems. Projects are initiated to close certain operational …
An Active Study Of A Roller Coaster Project In Asia.,
2010
East Tennessee State University
An Active Study Of A Roller Coaster Project In Asia., Robert Leamon Bridges
Electronic Theses and Dissertations
A roller coaster manufacturer became aware that improperly heat treated track couplings were sent to a construction site for assembly. Concerns were that suspect couplings might not meet the engineering specifications and could be vulnerable to sudden failure. A testing company in Oak Ridge, TN that specializes in in-situ and laboratory mechanical testing was contacted by the manufacturer for help in this endeavor. The construction company elected to enlist a local testing firm to perform field tests on the components instead of the company in Oak Ridge. The test methods used are incapable of providing quantitative results that could be …
Utilizing Knowledge Transfer To Promote Management Of Countervailing Risks In Value Stream Analysis,
2010
Old Dominion University
Utilizing Knowledge Transfer To Promote Management Of Countervailing Risks In Value Stream Analysis, Jeffery A. Temple
Engineering Management & Systems Engineering Theses & Dissertations
Organizations are frequently faced with the challenges of modifying and streamlining their processes by utilizing the latest process improvement techniques such as Lean Thinking. They use these techniques to allow them to better perform their organizational purposes through the elimination of waste and non-value added steps. Personnel performing these modifications need to account for potential outcomes and risks when streamlining processes. An association of knowledge transfer and experience to the identification and handling of these countervailing or alternative risks when performing Lean Thinking value stream analysis is investigated. The elements of risk management, Lean Thinking and knowledge transfer are described. …
Risk And System-Of-Systems: Toward A Unified Concept,
2010
Old Dominion University
Risk And System-Of-Systems: Toward A Unified Concept, C. Ariel Pinto, Michael K. Mcshane, Rani Kady
Engineering Management & Systems Engineering Faculty Publications
The scope of this paper is the survey of both fundamental and most recent publications in system-of-systems, business and insurance, as well as risk analysis, modeling, and management for the purpose of better describing the concept of risk in recognition of emergence and complexity which characterizes many systems within the concern of engineering and business managers. The ultimate goal is to provide engineering and business managers the necessary perspective on the concept of risk and in its management for the next generation of sustainable systems - including various descriptions of risk and discussion of the relevance of properties of system-of-systems …
Goal Approach To Risk Scenario Identification In Systems Development,
2010
Old Dominion University
Goal Approach To Risk Scenario Identification In Systems Development, Cesar Ariel Pinto, Andreas Tolk, Rafael Landaeta
Engineering Management & Systems Engineering Faculty Publications
The scope of this paper is the exploration of fundamental issues in identifying risk scenarios during systems development. Systems development refers to a series of processes which span conceptualization, designing the architecture, obtaining the elements, and eventually integrating all these elements into the fully developed final system. For truly sustainable and green systems, identifying risk scenarios early and continuously over the system development processes is vital. This paper contains various descriptions of risk from the project (i.e. programmatic) and technical perspectives, an exploration of the generally accepted risk management process, and how these relate to systems development through system goals. …
An Evaluation Of Risk Management Courses Offered In Engineering Management Programs,
2010
Old Dominion University
An Evaluation Of Risk Management Courses Offered In Engineering Management Programs, S. Jimmy Gandhi, C. Ariel Pinto
Engineering Management & Systems Engineering Faculty Publications
For this paper, the authors have surveyed a total of 22 engineering management (EM) programs in the United States (both accredited and non-accredited). The purpose of this study was to analyze the offering of risk management courses as part of the engineering management curriculum. The findings showed that the majority of the programs did not offer a single dedicated course on risk management and merely covered the topic as part of other courses such as project management. The authors have made recommendations that risk management should be included as a required part of the EM curriculum due to the higher …
Applying Geographic Information Systems To Support Strategic Environmental Assessment: Opportunities And Limitations In The Context Of Irish Land-Use Plans,
2010
Technological University Dublin
Applying Geographic Information Systems To Support Strategic Environmental Assessment: Opportunities And Limitations In The Context Of Irish Land-Use Plans, Ainhoa Gonzalez, Alan Gilmer, Ronan Foley, John Sweeney, John Fry
Articles
The strengthening of spatial database infrastructures, further promoted by the INSPIRE Directive adopted in 2007, has led to an increased use of spatial data in planning and decision-making. Given that land-use plans are intrinsically spatial, such evidence and approaches can significantly benefit plan-making. A spatial framework could especially support the specific Strategic Environmental Assessment (SEA) aspects of the plan-making process. Spatial tools such as Geographic Information Systems (GIS) are particularly well-placed to support the environmental integration sought in SEA by providing evidence through the spatial assessment of multiple environmental datasets. Moreover, GIS bring the opportunity to augment conventional assessment techniques …
Development Of A Framework To Evaluate Human Risk Towards Sustainable Risk Management,
2010
Old Dominion University
Development Of A Framework To Evaluate Human Risk Towards Sustainable Risk Management, Ra'ed M. Jaradat, Rani A. Kady, C. Ariel Pinto
Engineering Management & Systems Engineering Faculty Publications
Risk managers are constantly faced with the challenge of making decisions at various levels of their organizations. One of the challenges, which often times is unavoidable, lies in assigning a monetary value to human risks. Such challenge necessitates engineering managers to make educated decisions on the level of risk that the organizations and businesses should accept when it comes to human. The purpose of this study is to suggest a suitable framework that captures this aspect of engineering Risk Management in order to make rational and sustainable decisions about such assessed risk. This will be accomplished by exploring the tools, …
Project And Risk Management: A Systematic Approach,
2010
Old Dominion University
Project And Risk Management: A Systematic Approach, Baqer Alali, C. Ariel Pinto, Andreas Tolk, Rafael Landaeta
Engineering Management & Systems Engineering Faculty Publications
The main purpose of this paper is to discuss three related topics of project management, systems management, and risk management. The issue that would be addressed in this paper is how risks are addressed in project and systems management, and how risks are propagated between projects and systems. A framework is proposed to overcome the problem of risk propagation from project to the systems. It was shown that the proposed framework can be deployed to existing risk management process with reasonable interventions (e.g. process prescribed by PMI). Finally a proof-of-concept application shows potential of the framework for various types of …
Hazard Identification, Risk Assessment And Risk Control (Hirarc) In A Corrugated Box Manufacturer.,
2010
Universiti Malaya
Hazard Identification, Risk Assessment And Risk Control (Hirarc) In A Corrugated Box Manufacturer., Fraziel Barahim
Student Works (2010-2019)
Packaging is one of the biggest industries in the world. It involves paper, glass,metal, flexible and plastic. The corrugated paper packaging worldwide has been growing at 3% to 4% per annum. In line with the expansion of the corrugated paper packaging manufacturing, the potential hazards to human physical and health, property and the environment posed by its operations and production activities have created an increase in awareness and brought up safety issues amongst industry, government and public. The hazard identification and risk assessment plays a role in a number of areas in the safety management, including regulatory policies and guidelines, …
