Heat - Pump System With Refrigerant Charge Diagnostics, Fadi M. Alsaleem, Gregg H. Hemmelgarn

Durham School of Architectural Engineering and Construction: Faculty Publications

A heat-pump circuit may include an indoor heat exchanger, an outdoor heat exchanger, a compressor adapted to circulate a working fluid between the indoor and outdoor heat exchangers, and an expansion device disposed between the indoor and outdoor heat exchangers. A monitor for the heat-pump system may include a return-air temperature sensor, a supply-air temperature sensor, and a processor. The return-air temperature sensor may be adapted to measure a first air temperature of air upstream of the indoor heat exchanger. The supply-air temperature sensor may be adapted to measure a second air temperature of air down stream of the indoor …

Middle School Student Habits, Perceptions, And Self-Directed Learning, Scott R. Bartholomew

Faculty Publications

Today’s students are growing up in a digital world with constant connectivity, instant access to information, and new technological developments at every turn. The feasibility, effectiveness, and possibilities of students leveraging technological tools around them for learning are the subject of continual debate (Becker, 2017; Bowen, 2012; Tamim, Bernard, Borokhovski, Abrami, & Schmid, 2011). In this study, 706 middle school students from 18 classes worked in groups of 2-3 to complete an open-ended engineering design challenge. Students completed design portfolios and constructed prototypes in their groups in response to the design challenge. Classes were divided with some receiving access to …

Effects Of Transportation Hazards On High Barrier Flexible Packaging Films, Kyle Dunno

Journal of Applied Packaging Research

Two flexible food packaging barrier material film structures were employed for this research study to evaluate the effects of over-the-road truck transport. The films containing different barrier materials, ethylene-vinyl alcohol (EVOH) or aluminum oxide (AlOx), were selected based on their abundant use within the flexible food packaging arena. Pouches were formed and filled with tomato paste before being thermally processed then palletized for shipment. Pouches were shipped over-the-road via truck transport a distance of 2,500 miles. After transport, the oxygen transmission rate (OTR) of the pouches located on the bottom and top layers of the palletized loads were obtained and …

Scatterometry Of 50 Nm Half Pitch Features, Ruichao Zhu

Optical Science and Engineering ETDs

Metrology technologies are an essential adjunct to Integrated Circuit (I.C.) Semiconductor manufacturing. Scatterometry, an optical metrology, was chosen to measure 50 nm half pitch feature structures. A bread-board scatterometry system has been assembled to provide a non-contact, non-destructive, accurate and flexible measurement. A real-time, on-line scatterometry system has also been demonstrated and proven to provide a high throughput measurement.

Three different types of samples have been measured using the scatterometry setup. The wire-grid polarizer (WGP) sample has been made by Jet and Flash Nanoimprint Lithography with ~100 nm pitch and ~50 nm wide ~200 nm tall Al gratings on fused …

The Eco-Smart Can, Darack B. Nanto

Undergraduate Honors Theses

I noticed that maintenance workers had the same itinerary when emptying trashcans, meanwhile some trashcans needed to be emptied urgently. Traditionally, ETSU maintenance operate on daily routes to pick trash on designated time, regardless the level of the containers. The time, resources and labor invested in collecting the trash could be saved. Therefore, I decided to use the Internet of Things (IoT) to create a device that will optimize trash collection, to reduce costs and pollution.

Power-Weighted Divergences For Relative Attenuation And Delay Estimation, Ruairí De Fréin, Scott T. Rickard Prof

Articles

Power-weighted estimators have recently been proposed for relative attenuation and delay estimation in blind source separation. Their provenance lies in the observation that speech is approximately windowed-disjoint orthogonal (WDO) in the time-frequency (TF) domain; it has been reported that using WDO, derived from TF representations of speech, improves mixing parameter estimation. We show that power-weighted relative attenuation and delay estimators can be derived from a particular case of a weighted Bregman divergence. We then propose a wider class of estimators, which we tune to give better parameter estimates for speech.

Eastern Kentucky University's Program Of Distinction: Highlighting Research Within The Colege Of Justice And Safety, Naomi M. Sigler, Kayla Tunajek

Posters-at-the-Capitol

Posters at the Capitol 2016-2017 Abstract

University: Eastern Kentucky University – College of Justice & Safety

Program: Fire, Arson, and Explosion Investigation

Student Presenters: Kayla Tunajek and Naomi Sigler

Faculty Mentor: Paul Grant

Title: Eastern Kentucky University’s Program of Distinction: Highlighting Research within the College of Justice and Safety

Keywords: Program of Distinction; Eastern Kentucky University; fire programs; research projects; student opportunities.

ABSTRACT

This project is intended to represent the Program of Distinction at EKU. The fire program at Eastern provides students several unique majors and encourages students to do research within their respective fields. This research is then presented …

High Power Optically Pumped Semiconductor Lasers For Sodium Guidestar Applications, Shawn W. Hackett

Optical Science and Engineering ETDs

Optically pumped semiconductor lasers (OPSLs) are shown to provide a much more compact and less expensive source for illumination of the sodium layer of the mesosphere for use as a sodium laser guidestar via single and two photon excitation schemes. This represents a revolution in laser guidestar technology as the cost, size, and power requirements for a laser guidestar system are shown to have been decreased by an order of magnitude with guidestar performance shown to be similar to previous sources. Sodium laser guidestar sources for broadband simultaneous illumination of multiple lines are developed and simulated. Simulations are then compared …

Image Text Search And Retrieval System, Wayne De Fremery, Sanghun Kim

Barowsky School of Business | Faculty Patents

An imaging device comprising a flexible sensor attached to a control case. The flexible sensor provides both a source of illumination to the image being captured and a method of capturing the image. The method of capture comprises a field of reactors disbursed across the facial area of the sensor, the output of which produces a dot-pattern capture of the intended image which is passed to a storage device.

Product Realization Of A Child’S Occupational Therapy Device Using Nasa’S Systems Engineering Processes, Chris Beckham, Greg Duke

Von Braun Symposium Student Posters

No abstract provided.

Distributed Fiber-Optic Temperature Sensor Validations Using Field Deployments In The Flooded Orphan Boy Mine Shaft In Butte, Mt, Elliott Mazur

Graduate Theses & Non-Theses

The process of sensor validation through experimentation with the Omnisens Distributed Temperature and Strain (DITEST) Brillouin Optical Time Domain Analyzer (BOTDA) proved to be a challenging project. The project encompassed sensor calibrations, system error minimization, sensor network design and deployment, and the characterization of temperatures in the Orphan Boy Mine shaft. Fiber-optic cable sensor calibrations yielded linear relationship coefficients 0.6-1.0MHZ/°F, indicating a strong positive correlation between Brillouin Frequency Shifts and temperature. Calibrated sensors demonstrated accuracies near ±0.8°F using the corrected error bounds from residual analyses as the benchmark. Fiber-optic measurement accuracy and repeatability were controlled by user-selected signal interrogator settings …

Collecting, Preparing, And Synthesizing Well Log Data For Subsurface Mapping: Example From The Bakken Formation, Asel Sherimkulova

Graduate Theses & Non-Theses

Late Devonian and Early Mississippian Bakken Formation consists of three distinct members: the upper shale, middle, and lower shale. The upper and lower shales are excellent source rocks, rich in organic content. The organic material in the shales was derived from planktonic algae. Both the upper and lower shales were deposited during a transgressive event in hypoxic to anoxic conditions. The original total organic carbon content in the Bakken shales ranges from 20 to 22 weight percent, however; the content decreases to 10 to 17 weight percent as a result of maturation of hydrocarbons and primary expelling of oil. High …

Construction Professional Service Firm Management: A Longitudinal Study Of Strategic Planning In Irish Quantity Surveying Practices, Roisin Murphy

Conference papers

This paper reports on the ongoing investigation of strategic planning in Irish Quantity Surveying practices. The construction industry in Ireland has undergone a period of significant change in the last five years fuelling a shift in focus from tactical to strategic planning in professional service firms operating within the sector. A previous paper identified the type, scope and extent of strategic planning within Quantity Surveying (QS) practices in Ireland in the years up to and during the economic downturn. The current paper expands on the previous research by identifying changes in approach to strategic management within these professional service firms …

Proposal Of Hybrid Damping Package Design, Qi Zhang, Katsuhiko Saito, Katsushige Nagaoka

Journal of Applied Packaging Research

To protect products from shock and vibration during transport, Cushioning Packaging Design is implemented. The cushioning performance and anti-vibration performance of a package is tested by a drop test and a vibration test. The effectiveness of the cushioning during a drop test is predictable because the cushioning material`s thickness and bearing area are determined by the cushion curves which are plotted based on the results of the tests. However, an effective package-design method which can predict the package vibration of all the static stresses that are suitable for cushioning package design has not been established yet.thus, it remains uncertain until …

A Time For Change” An Evaluation Of The Ability Of The Quantity Surveyor To Measure Mechanical And Electrical Services Under The Irish Public Works Contracts (Designed By The Employer) Using The Agreed Rules Of Measurement., Charles Mitchell

Other Resources

Abstract

This dissertation seeks to examine the ability of the quantity surveyor to measure mechanical and electrical bills of quantities under the Irish Public Works Contracts using the Agreed Rules of Measurement 4. The study uses the opinions and perspectives of a broad range of industry stakeholders to identify barriers and drivers which will facilitate this change.

A mixed methodology research method incorporating both quantitative and qualitative research methods was used. A literature review covers relevant research in the field of the Public Works Contracts, the use of bills of quantities and specialist sub-contractors. The results of an unreported survey …

Improvement Of Wrecks Removal Mechanism In Inland Waters Of China : A Case Study On The Yangtze River, Chichao Jiang

Maritime Safety & Environment Management Dissertations (Dalian)

No abstract provided.

Designing And Building An Automatic Chamfer Grinder, William Johnson

Mahurin Honors College Capstone Experience/Thesis Projects

Modern day manufacturing is a demanding environment with a constant need for process improvement. As automation becomes more advanced, there are fewer jobs that must be completed by a human. In the case of Stupp Bridge Company, a local manufacturer of steel bridge girders, their workforce is highly skilled, so replacing mundane tasks with automation allow the skilled workers to focus on the difficult jobs. One such task is grinding a chamfer onto every leading edge of each girder flange, eight edges in total, ranging from 20 to 200 feet long. The purpose of this project was to design an …

Abstracts From The 2016 Ahac Conference, Erick Agrimson

2017 Academic High Altitude Conference

This is a listing of Abstracts from AHAC 2016

Optimization Of A High-Speed X-Ray Imaging System For Studying Sprays, Lane E. Schultz, Mikhail N. Slipchenko, Terrence R. Meyer, Wilbert C. Slowman

The Summer Undergraduate Research Fellowship (SURF) Symposium

Spray-based liquid atomization and liquid mixing is critical for development of efficient combustors and drug delivery systems as well as multiple coating-related applications. While optical methods allow characterization of low density regions of sprays, the scattering of optical photons hinders the characterization of a dense core. Unlike optical photons, higher-energy X-ray photons have the capability to penetrate and image the core structure of sprays. Here we characterized temporal and spatial resolution of an X-Ray imaging system based on a commercially available tube source with an anode size of 0.6 mm. For high-speed imaging, a phosphor screen in combination with a …

Predicting The Effect Of Gaps Between Pallet Deckboards On The Compression Strength Of Corrugated Boxes, Matthew Baker, Laszlo Horvath, Marshall S. White

Journal of Applied Packaging Research

The majority of corrugated boxes are transported and stored on pallets where the reduced support area due to deckboard gaps has an adverse effect on the strength of the corrugated boxes Therefore, an adjustment factor is used to adjust the box compression strength to account for the lack of support, but these factors were developed for a limited range of deckboard gaps, box sizes, and box orientations. In addition, there is no predictive model that can estimate the reduction in compression strength based on the size of the box and the size of the gap. The main objective of this …