Other Engineering Commons^™

Orfalea College Of Business Fire Safety Analysis, Garth Ornelas

Fire Protection Engineering: Culminating Experience Project Reports

The following report discusses the fire and life safety factors for the Orfalea College of Business Building located on the main campus of California Polytechnic State University in San Luis Obispo. The building functions are primarily administrative and academic in nature, with various lecture halls, offices, and labs located throughout the building. The Business Building was constructed in 1989 following the 1985 Uniform Building Code (UBC). For the purposes of this report, the building will be evaluated using the 2015 International Building Code, NFPA Life Safety Code Handbook (Thirteenth Edition), SFPE Handbook (4th and 5th Editions), and the NFPA handbooks …

Wistron Greentech, Mckinney, Tx- Life Safety Evaluation, Charles R. Cates

Fire Protection Engineering: Culminating Experience Project Reports

A fire protection and life safety review of the Wistron GreenTech facility in McKinney, TX is performed. The facility was reviewed from both a prescriptive (building code) and performance based design per the codes summarized in the report. The prescriptive fire and life safety systems analyzed where the following: Building Code Analysis Including but not limited to: Occupancy classifications, Occupancy separations, Building height and areas, Type of construction, Fire resistive construction, Means of egress, Fire Alarm and Detection Systems, Automatic Fire Sprinklers & Water Supply, Special Hazards, Emergency Planning and Preparedness The prescriptive requirements in general where met, the exceptions …

Fire And Life Safety Report Orfalea College Of Business, Sulaiman Almohammadi

Fire Protection Engineering: Culminating Experience Project Reports

A comprehensive fire and life safety analysis was performed on the Orfalea College of Business. The report covers the prescriptive analysis of the building and the performance-based design analysis. The prescriptive analysis includes assessment of the relevant codes for egress system, water-based suppression system, alarm and detection system, and structural fire protection. The egress analysis under the Life Safety Code 2015 found the building meets the requirements of occupant load to exceed exit capacity, number of exits and its location, travel distances. Four rooms on the second floor that have not met the common path of travel distances limits were …

Fire And Life Safety Evaluation Of Christopher Cohan Center, Mishuk Datta

Fire Protection Engineering: Culminating Experience Project Reports

A prescriptive and performance-based fire and life safety evaluation for Christopher Cohan Center is performed. The results and findings of the evaluations are conveyed in this report. Christopher Cohan Center was built in accordance with California Building Code (1992 Edition) and California Fire Code (1992 Edition). The current version (2015) of International Building Code is consulted for prescriptive evaluation. The protection requirements set forth in IBC are intended to limit the threat from stage fires to an audience, to reduce the likelihood of a large fire in the stage area and to reduce the possibility of irrational mass response. These …

Fire And Life Safety Evaluation Of The Christopher Cohan Center, Joakim Midtun Larsen

Fire Protection Engineering: Culminating Experience Project Reports

This project is an academic exercise, as part of the MS Fire Protection Engineering program of California Polytechnic State University. The project is a culminating report with regards to life safety analysis of the Christopher Cohan Center of Cal Poly, which builds on the fundamental and applied courses of the program. The analysis is twofold, where the first part is a Prescriptive Analysis of the building and its features, followed by a Performance Based Life Safety Analysis. Both parts are performed in accordance with NFPA 101 Life Safety Code 2015 edition, Codes/Standards references within NFPA 101, and supplemented by methods …

Fire And Safety Analysis Robert E. Kennedy Library, Marius Bjelde Andersen

Fire Protection Engineering: Culminating Experience Project Reports

The Robert E. Kennedy Library is located on Cal Poly Campus. The Library is a five-story building with different occupancies which consists of library areas, offices, mechanical equipment and storage areas. The building has a total area of 178 702 ft². The original code of construction for the Library was the 1976 Uniform Building code (UBC). However, the fire and life safety analysis of the building in this report is performed using: Egress: NFPA 101 LSC 2015, Water based suppression: NFPA 13, Structural fire protection: 2015 IBC, Fire detection, alarm and communication systems: NFPA 72, Performance based design: NFPA 101 …

Building- Fire Protection Analysis Report, Chris Schwendiman

Fire Protection Engineering: Culminating Experience Project Reports

The building in XXX was constructed in XXX. It was designed using the International Building Code (IBC). This fire protection analysis report will be reviewing the building based on the 2015 edition of the IBC including several performance based fire scenarios involving the smoke exhaust system.

The passive system section highlights the physical construction of the building. The building is a business occupancy with three separate stories including a penthouse which is included in the third story. The building has adequate fire ratings for a Type II-B construction except for heavy timber columns within the commons of the building. It …

Fire And Life Safety Analysis- Warren J. Baker Center For Science And Mathematics, Chad Rudolph Graves

Fire Protection Engineering: Culminating Experience Project Reports

This report covers the fire protection features of the Warren J. Baker Center for Science and Mathematics located on Cal Poly Campus San Luis Obispo California. The prescriptive analysis of the building will focus on the structural fire protection, egress, fire suppression, fire alarm and detection systems to determine if the meet current codes and standards. The performance based analysis will discuss certain methods and design fire scenarios that can be present within the building and the buildings ability to protect occupants until they can exit safely.

The purpose of this report is to determine if the selected building is …

Synchronous Generation And Coherent Control Of Extreme Wavelength Radiation And Ultrafast Spectroscopy, Aram Gragossian

Optical Science and Engineering ETDs

Recent progress in ultrafast laser science has made it possible to synthesize and control complex electromagnetic waveforms down to sub-femtosecond timescales. These tailored ultrashort laser pulses can generate coherent bursts of electromagnetic radiation in the extreme ultraviolet (XUV) and terahertz spectral regions with durations reaching the attosecond regime in the XUV region. This is accomplished by coherently controlling electronic motion in gas plasma targets. With these novel radiation sources, ultrafast time-resolved spectroscopy can be performed on a large variety of materials. Knowledge of the spectral phase of an ultrashort pulse is crucial for many applications. There are a variety of …

Balancing The Navigational Safety, Efficiency & Financial Aspects Of Oreis, Raza Ali Mehdi

MARENER 2017

The increasing number and sizes of offshore renewable energy installations (OREIs), combined with the ambitious plans for future developments in the sector, portray a bleak outlook for ‘traditional’ maritime and marine players: if the current plans for OREIs are realized, sea-space will become increasingly restricted for activities such as shipping.

Sustained growth of both OREIs and shipping may thus lead to situations where certain risk control options (RCOs) need to be adapted in order to maintain safety – despite the fact that such measures themselves may be counter-productive in terms of energy efficiency or financial sustainability. This leads to the …

Integrated Stem Through Tumblewing Gliders, Scott R. Bartholomew

Faculty Publications

Teachers have the opportunity to use technology and engineering design problems to engage students in integrated STEM education. “Tumblewing” gliders are easy-to-make paper gliders that can challenge, excite, and engage students. As students emphasize the practices of science and engineering while completing a tumblewing design challenge, they will engage in both scientific inquiry and the engineering design process.

See The Bigger Picture: A True Systems Approach To Healthcare, Brian J. Galli

Faculty of Computer Science/Management Engineering Publications

“Healthcare” is typically related directly to patient care, hospitals, and ambulatory services, but it is important to see that healthcare is beyond just the delivery of care in hospitals or ambulatory services. A more accurate systems approach to views the world of healthcare as one that involves several stakeholders, including: healthcare delivery (patient care in hospitals and ambulatory services), regulatory agencies, health insurance/health plan organizations, medical device design and manufacturers, pharmaceuticals, society, government (all levels), and healthcare reform organizations. All of these stakeholders relate to each other in many levels and impact our healthcare system.

This paper will cover the …

A Review Of Approaches To Solving The Problem Of Bim Search: Towards Intelligence-Assisted Design, Hamed Khademi, Avril Behan

Conference papers

Due to the growing adoption of BIM and the rising popularity of cloud computing, BIM models are increasingly stored in central cloud repositories or Common Data Environments. Effective management and exploitation of these models creates the requirement for BIM retrieval systems. Thus far, the BIM industry has utilized general-purpose, text-based search techniques that operate on BIM metadata. This paper highlights the need for a domain-specific BIM search engine and reviews various approaches to address the problem of BIM search. Three main approaches were identified as context-, geometry-, and content-based BIM retrieval. For a comprehensive BIM retrieval system, all three approaches …

Solar Dryers For Tropical Food Preservation: Thermophysics Of Crops, Systems And Components, Vivek Tomar, G. N. Tiwari, Brian Norton

Articles

Drying reduces the moisture content of harvested crops thus slowing decay processes to enable longerterm storage. Solar dryers contain the crop being dried, to enhance solar energy collection incurring lower crop losses than are associated with open-sun drying and recurrent costs than are inherent to uses of fossil-fuels for drying. The influences of key environmental, operational and design parameters for solar dryers are discussed including: (i) psychrometry of drying processes and ambient conditions, (ii) how initial crop properties are converted to final desired product attributes, (iii) feasibility of using powered components such as fans and (iv) air-heating solar collector selection.

Computer-Aided Cancer Diagnosis And Grading Via Sparse Directional Image Representations, Hadi Rezaeilouyeh

Electronic Theses and Dissertations

Prostate cancer and breast cancer are the second cause of death among cancers in males and females, respectively. If not diagnosed, prostate and breast cancers can spread and metastasize to other organs and bones and make it impossible for treatment. Hence, early diagnosis of cancer is vital for patient survival. Histopathological evaluation of the tissue is used for cancer diagnosis. The tissue is taken during biopsies and stained using hematoxylin and eosin (H&E) stain. Then a pathologist looks for abnormal changes in the tissue to diagnose and grade the cancer. This process can be time-consuming and subjective. A reliable and …

Formative Assessment In Mathematics For Engineering Students, Eabhnat Ni Fhloinn, Michael Carr

Articles

this paper, we present a range of formative assessment types for engineering mathematics, including in-class exercises, homework, mock examination questions, table quizzes, presentations, critical analyses of statistical papers, peer-to-peer teaching, online assessments and electronic voting systems. We provide practical tips for the implementation of such assessments, with a particular focus on time or resource constraints and large class sizes, as well as effective methods of feedback. In addition, we consider the benefits of such formative assessments for students and staff.

Research On Control Methods Of Roof Radiant Cooling System, Yongbin Li, Zhaoyi Zhuang, Qiqi Zhu, Jian Song, Haipeng An

Durham School of Architectural Engineering and Construction: Faculty Publications

Taking the capillary ceiling radiation air conditioning system in radiation cooling Laboratory of comprehensive experimental building in Shandong Jianzhu University as an example, research the two different control methods which are room temperature control and water temperature control. The roof cooling model was established by using TRNSYS simulation software, two typical summer days were selected to explore the stability of the room temperature and the supply and return water temperature, research the comfort of human body and system energy consumption under two control methods. The results show that the indoor temperature of the two control methods can be stable at …

A Study Of Mathematics Achievement, Placement, And Graduation Of Engineering Students, Sara Hahler Blazek

Doctoral Dissertations

The purpose of this study was to determine how background knowledge impacts freshmen engineering students' success at Louisiana Tech University in terms of grades in two different freshman classes and graduation. To determine what factors impact students, three different studies were implemented. The first study used linear regression to analyze which demographic and academic variables significantly impacted freshman math and engineering courses. Using regression discontinuity, the second study determined if the university's placement requirement for Pre-Calculus was appropriate. The final study analyzed factors that impact graduation for engineering students as well as other disciplines to determine which significant variables were …

Hf Hauff Mobile Wind Turbine: Lateral Articulating Arm, Brett Ulrich

All Undergraduate Projects

The objective is to create a leveling system that will be incorporated onto a platform which houses a mobile wind turbine used in agricultural applications. There are two approaches that were tested to arrive at a solution that would extend two concentric steel beams outwards and retract them. The first method involved a centralized hydraulic reservoir and braided oil lines leading to a charged shock that will be attached to different parts of the beams allowing for lateral movement. The second method utilizes an altered design from the boom of a crane truck, using a cable driven extension system and …

Simulation And Analysis Of Switched Reluctance Generator For Renewable Energy Applications, Simone Sartori, Malabika Basu, Michael Farrell, Andrea Tortella

Conference papers

The purpose of the paper is to investigate the application of a Switched Reluctance Generator (SRG) for future wave energy converters. This machine presents some favourable features as compared to others. The machine optimal operation can be obtained after a detailed assessment of the control strategy. For this purpose, a SRG model is implemented in Matlab® Simulink® environment to find out the values of the switching angles which maximize the converted power and to set up an appropriate control of the power exchange with the grid to which the machine is connected. The simulation results provide evidence that a proper …