Other Engineering Commons^™

Assessment Methods From Around The World Potentially Useful For Public Transport Projects, Eric Bruun, Marianne Vanderschuren

Journal of Public Transportation

The financial crisis in 2008/2009 has made many countries aware that public funds need to be managed better. A logical step is to identify methods that thoroughly assess the impacts of infrastructure and service investment. The authors argue that assessments should both identify and use performance indicators related to the ‘triple bottom line’, i.e. economic, social and environmental impacts.

This paper provides an overview of assessment methods used to evaluate public transport investments. Positive and negative aspects of various assessment tools are identified and discussed. Some developing world examples appear to be more elaborate and appropriate, than developed world examples, …

Orfalea College Of Business- Fire & Life Safety Analysis, Napoleon E. Nino

Fire Protection Engineering: Culminating Experience Project Reports

This report details the prescriptive and performance based analyses performed on the Orfalea College of Business building, located on the Cal Poly San Luis Obispo campus. Designed in accordance with the 1985 Uniform Building Code (UBC), this building is evaluated for compliance with the requirements prescribed under relevant codes in place as of 2016. The main function of this building is to serve both academic and administrative purposes, including classrooms and staff offices. Aspects of the building analyzed include: Egress Systems, Structural Fire Protection, Smoke Management, Fire Detection, Fire Notification, and Fire Suppression The prescriptive analysis demonstrates the lack of …

Lax Continental Grand- Fire Protection And Life Safety Analysis, Aden Malek Stepanians

Fire Protection Engineering: Culminating Experience Project Reports

A prescriptive analysis of the project building was conducted using the 2016 California Building & Fire Code along with current codes and standards pertaining to specific elements. Encompassed in this analysis is a review of the project building’s structural fire protection, water-based suppression systems, fire detection and alarm systems, smoke control and occupant egress.

Void of construction documentation, the analysis of the structural fire protection of the building was determined by evaluating the current design and use. The restricting factor that determine the construction type was the assembly use on the 6th floor. Other than Type I construction, assembly use …

An Experimental Study In The Hydroelastic Response Of An Aluminum Wedge In Drop Tests, Jonathan R. Eastridge

LSU New Orleans Theses and Dissertations

Slamming of marine planing craft is expected to arise due to the high speed nature of their operating conditions. High hydrodynamic forces are inevitably induced causing the shell plating to deflect, which in turn can influence the flow physics surrounding the hull. In order to study the hull’s hydroelastic response due to a slamming event, wedge drop experiments were performed with an aluminum wedge of 57 inches in length, 47 inches in breadth, and 20 degree deadrise with 1/4 in. thick unstiffened bottom panels. The elastic behavior of the hull plating was measured via two methods. The first method uses …

Anisotropy And Emission From Air With Laser Filaments, Mohammadamin Rasoulof

Optical Science and Engineering ETDs

Laser filaments are extremely interesting entities for their unique characteristics. The high intensity inside the laser filaments creates nonlinear effects that are useful in many areas of optics. The laser filamentation is an appealing tool in the stand-off spectroscopy for its ability to propagate over long distances while maintains its extreme intensity. However, depletion of energy hinders its propagation over any desired distance. In order to understand the effect of laser filaments on the transparent medium that they propagate through, one needs to investigate interaction of the laser filaments with the constituents of media. In this work we study the …

Spatio-Temporally Resolved Optical Laser-Induced Damage To Study Defect Limited Performance Of Optical Films, Yejia Xu

Optical Science and Engineering ETDs

Laser-induced damage (LID) limits the performance of optical films and surfaces. Despite intensive study for decades following the invention of laser, the study of LID remains timely and attractive, because for nanosecond laser pulses the LID process is controlled by randomly distributed defects of unknown origin.

Traditional damage tests yield little information about the defects present in optical films and surfaces. These methods record a "yes" or "no" damage result after each test and cannot distinguish the different defects present.

This dissertation focuses on the development of a new kind of laser-induced damage test that measures the actual fluence (intensity) …

Technology From The Perspective Of Society And Public Interest, Chanwoon Park

Purdue Polytechnic Doctoral Dissertations

The ultimate goals of this study were to determine ways to reconcile technology with public interest and to understand the relationship between what we know and how we feel about technology. To achieve the goals, related literatures were reviewed; the mechanism of technology development was described with empirical data; and human perception of technology was tested with a survey. The duality of technology that implied technological inherencies of technical reason and social meanings was the principle assumption of the study. Neutrality of technology becomes a myth with the presence of social meanings embodied in technology. Given the huge impact of …

Passive Solar Distillation Of Acid Rock Drainage, Stephanie Shreve, Luke Galuska, Anna Stoller, Alex Raney, Agustin Caceres, Caitlyn Chambers, Chris Graham, Devin Hazlett

Chemical Engineering Undergraduate Honors Theses

Arkansas Razorback Distillers (A.R.D.) has developed a passive solar distillation system for treating acid rock drainage (ARD) from legacy (i.e., abandoned) mines. The solar still addresses the need to reduce both the metal sulfate contaminants as well as the acidity of acid rock drainage. During the design phase, A.R.D. addressed the need for the system to be low cost, simple, and effective for general use as well as a specified location. To demonstrate the applicability of the solar still, A.R.D. used the Freeport McMoRan Inc. Copper Queen legacy mine in Bisbee, Arizona, as a base case scenario. The mine was …

Feasibility Analysis Of Recycled-Paper Fueled Agricultural Desalination Process: Design Of Recycling And Desalination Processes, Sean M. Street

Chemical Engineering Undergraduate Honors Theses

While recycled-paper-briquettes have lower BTU ratings than wood, and fresh water is typically a low cost to agricultural entities, situations exist where economic and/or environmental factors may allow a recycled-paper-fueled desalination process to be viable for some specific agricultural entities. This document begins with a discussion of how water is priced throughout India before analyzing trends in the Maize futures market. By tying the two together, an opportunity is created for solution which the remainder of the document presents. Paper waste in India makes-up 50% of its solid waste country-wide; however, only a quarter of that waste is recycled - …

Uncertainty Of Stereo Piv Calibration And Self-Calibration, Braydon J. Williams

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Particle image velocimetry (PIV) is a widely used fluid measurement technique. Three dimensional PIV data or stereo PIV is acquired using two cameras. Stereo cameras are calibrated from camera coordinates, pixels, to real world units such as millimeters using calibration models. Stereo calibration is fundamental to the accuracy of a PIV measurement. In this thesis, the accuracy of the stereo calibration is assessed. The mean error of stereo calibration was found to be 0.23%.

Engaging Children In Engineering Design Through The World Of Quadcopters, Greg J. Strimel, Scott R. Bartholomew, Eunhye Kim

Faculty Publications

The interest in engineering education for K-12 students has been rising (Carr, Bennett IV, & Strobel, 2012; Strimel, Grubbs, & Wells, 2016), and the importance of engineering education is discussed as early as the elementary school level (Hegedus, 2014). Petroski (2003) claims that children are ready to learn engineering because their play activities are similar to engineering and design activities, such as making, moving, and rearranging things. Studies have examined how elementary school students perceive engineering or engineers (Cunningham, Lachapelle, & Lindgren-Streicher 2005) and found that elementary-aged students associated engineering with repairing, installing, driving, constructing, and improving machines and devices. …

Designing The Technological World Through Biomimicry, Emily Yoshikawa, Greg J. Strimel, Scott R. Bartholomew

Faculty Publications

Scientific discoveries are a driver for advancing our technological world (ITEA/ITEEA; 2000/2002/2007). As more knowledge is acquired through scientific inquiry, people can better design and develop technological inventions and innovations (Knowles, Kelley, & Hurd, 2016). In turn, these novel technologies can aid in making new scientific discoveries, thus driving an ongoing cycle of technological advancement. However, in the process of designing and advancing our technological world, people can turn to the study of life and its phenomena to inspire and inform their designs. Nature is functional as well as beautiful. As we study the phenomena or functions of living organisms …

Mechanical Characterization Of Coir Fiber And Cotton Fiber Reinforced Unsaturated Polyester Composites For Packaging Applications, Balaji V, Senthil Vadivu K.

Journal of Applied Packaging Research

The aim of this work is to develop a natural fiber composites that can become a substitute for plywood and medium density fiber boards used in packaging application. In this work, the composite was fabricated with randomly oriented chopped coir and cotton fiber reinforced with unsaturated polyester resin. The different types of composite materials were prepared with different quantity of coir fiber and cotton fiber reinforced with unsaturated polyester by using hand lay-up technique. Mechanical properties such as tensile, flexural, impact and hardness strength are evaluated. Scanning Electron Microscope (SEM) was conducted on the fabricated composite to analysis the interfacial …

Contacts, Timothy Leonard, Abby Lisjak, Adam Foster

Sustainability and Connectivity

This a contact sheet of every group that the mentoring group has reached out to. There are no emails or phone numbers provided. If you would like those, please contact Kevin Hallinan.

Property Sensitivity Study For Oil Recovery In The Bakken, Daniel Beach

Graduate Theses & Non-Theses

The upstream (exploration and production) end of the petroleum industry has experienced tremendous success over the past fifteen years by employing innovative ways to drill and stimulate new wells thereby greatly increasing production. Based upon these successes, there has been a shift to unconventional wells, where the cost for drilling and completing wells can be much more expensive. Most unconventional wells target tight rock formations having low permeability and porosity. As a result, these reservoirs require enhanced stimulation to improve recovery operations to establish profitable oil or gas production. These wells are drilled horizontally to maximize contact area in the …

Modeling The Effect Of Methane Vs. Carbon Dioxide Injection On Oil Recovery: Case Study: The East Vacuum Grayburg-San Andres Unit, Lea County, New Mexico, Charles Ohalekwu

Graduate Theses & Non-Theses

This project aims to determine if methane (CH4) injection is more effective and economical than carbon dioxide (CO2) injection in a conventional dolomite reservoir by using the East Vacuum Grayburg-San Andres Unit (EVGSAU), Lea County, New Mexico as a model. This was done by simulating a CH4 and CO2 injection system and estimating the economics for each. CH4 injection has not been done at the EVGSAU, however CO2 has been used as a method of enhanced oil recovery.

The EVGSAU is located on the eastern side of the Vacuum Field, approximately 15 miles northwest of Hobbs in Lea County, New …

Dayton Regional Green Meeting Notes, Tim Leonard, Adam Foster, Abigail Lisjak

Sustainability and Connectivity

These are notes from our meeting with Lamees Mubaslat from Dayton Regional Green. She is really excited about more mentoring programs in Dayton.

Mentoring Brochure: Longer Version, Tim Leonard, Abigail Lisjak, Adam Foster

Sustainability and Connectivity

This is a mentoring brochure we created to show different organizations our ideas. This is the longer of two versions.

Mentoring Brochure: Shorter Version, Tim Leonard, Abigail Lisjak, Adam Foster

Sustainability and Connectivity

We made these brochures to talk to different organizations about our thoughts and ideas. There are two iterations of this. This one has less words.

How Tonality And Loudness Of Noise Relate To Annoyance And Task Performance” Noise Control Eng. J. 65(2), 71-82., Joonhee Lee, Jennifer M. Francis, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Audible tones in noise generated by building mechanical equipment can be a leading cause of complaints from occupants. A number of metrics have been developed to quantify prominence of a tone, but previous work has shown that the impact of a certain tonality appears to vary with the level of the broadband noise signal. More work on how tonal signals of varying tonality, tone frequency and broadband noise levels relate to annoyance and task performance is needed. This paper investigates such relationships between current noise metrics, annoyance and task performance under assorted tonal noise conditions through subjective testing. Participants rated …