Other Engineering Commons^™

Remotely Testing Whether A Climate Control System Controller Is Correctly Installed, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

Disclosed are exemplary embodiments of apparatus and methods for remote testing of controllers such as thermostats, to detect incorrect climate control system configuration parameters . In an exemplary embodiment, a computer wirelessly connects with a remote thermostat and sends signal (s) to the thermostat instructing the thermostat to perform climate control function (s) in predefined sequence (s). The computer receives signal (s) from the thermostat indicating whether the thermostat is performing the climate control function (s) in accordance with the sent signal (s). Based on the signal (s) received from the thermostat, the computer determines whether the thermostat is configured …

Engineering Magnetic Properties Of Nanoparticles For Biomedical Applications And Magnetic Thin Film Composite Heterostructures For Device Applications., Shivakumar Hunagund

Theses and Dissertations

The motivation of this study is to investigate the size dependent properties of Gadolinium silicide nanoparticles and their potential applications in Biomedicine. We use two approaches in our investigation - size dependence and possible exchange interaction in a core-shell structure. Past results showed Gd₅Si₄ NPs exhibit significantly reduced echo time compared to superparamagnetic iron oxide nanoparticles (SPION) when measured in a 7 T magnetic resonance imaging (MRI) system. This indicates potential use of Gd₅Si₄ ferromagnetic nanoparticles as T2 contrast agents for MRI.

Until recently most contrast agents (CA) that are used in Magnetic Resonance …

Prisoners Of The Capitalist Machine: Captivity And The Corporate Engineer, Eddie Conlon

Books/Book chapters

This chapter will focus on how engineering practice is conditioned by an economic system which promotes production for profit and economic growth as an end in itself. As such it will focus on the notion of the captivity of engineering which emanates from features of the economic system. By drawing on Critical Realism and a Marxist literature, and by focusing on the issues of safety and sustainability (in particular the issue of climate change), it will examine the extent to which disasters and workplace accidents result from the economic imperative for profitable production and how efforts by engineers to address …

Mechanical Response Of He- Implanted Amorphous Sioc/ Crystalline Fe Nanolaminates, A. Zare, Q. Su, J. Gigax, T. A. Harriman, M. Nastasi, L. Shao, D. A. Lucca

Nebraska Center for Energy Sciences Research: Publications

This study investigates the microstructural evolution and mechanical response of sputter-deposited amorphous silicon oxycarbide (SiOC)/crystalline Fe nanolaminates, a single layer SiOC film, and a single layer Fe film subjected to ion implantation at room temperature to obtain a maximum He concentration of 5 at. %. X-ray diffraction and transmission electron microscopy indicated no evidence of implantation-induced phase transformation or layer breakdown in the nanolaminates. Implantation resulted in the formation of He bubbles and an increase in the average size of the Fe grains in the individual Fe layers of the nanolaminates and the single layer Fe film, but the bubble …

Optimizing The Production And Injection Wells Flow Rates In Geothermal Field Using Artificial Intelligence, Muhammet Salih Ariturk

Graduate Theses, Dissertations, and Problem Reports (ETD)

In a geothermal field, power plants are designed for long-term electricity generation. Therefore, it is crucial to predict the future production and injection flow rates of the wells to determine the capacity of a power plant. In the designing of such power plants, calculations and estimations are based on the current future production, and injection flow rates and pressures in the geothermal field. Prediction of future production and injection flow rates also assist in building surface facilities with cost-efficient power plants. The most common problem in a power plant in geothermal fields is the inability to accurately estimate future expected …

Need For Aeromedical Evacuation High-Level Containment Transport Guidelines, Shawn G. Gibbs, Jocelyn J. Herstein, Aurora B. Le, Elizabeth L. Beam, Theodore J. Cieslak, James V. Lawler, Joshua L. Santarpia, Terry L. Stentz, Kelli R. Kopocis-Herstein, Chandran Achutan, Gary W. Carter, John J. Lowe

Durham School of Architectural Engineering and Construction: Faculty Publications

Circumstances exist that call for the aeromedical evacuation high-level containment transport (AE-HLCT) of patients with highly hazardous communicable diseases. A small number of organizations maintain AE-HLCT capabilities, and little is publicly available regarding the practices. The time is ripe for the development of standards and consensus guidelines involving AE-HLCT.

Hvac System Remote Monitoring And Diagnosis, Jeffrey N. Arensmeier, Gregg M. Hemmelgarn, Fadi M. Alsaleem, Priotomo Abiprojo

Durham School of Architectural Engineering and Construction: Faculty Publications

A monitoring system for an HVAC system of a building includes a monitoring server located remotely from the building. The monitoring server receives, from a device installed at the building, (i) time-domain current data based on a measured aggregate current supplied to a plurality of components of the HVAC system, and (ii) data based on frequency-domain current data of the measured aggregate current. Based on the received data, the monitoring server accesses (i) whether a failure has occurred in a first com ponent of the plurality of components and (ii) generates a preliminary advisory in response to determining that the …

Strategies And Resources For Government Agencies To Utilize Disadvantaged Business Enterprises In Transportation Design-Build Projects, Baabak Ashuri, Adjo Amekudzi-Kennedy, Stephanie Amoaning-Yankson, Yunping Liang, Yang Cao

Durham School of Architectural Engineering and Construction: Faculty Publications

The Disadvantaged Business Enterprise (DBE) Program was established to provide opportunities for businesses owned and controlled by socially and economically disadvantaged individuals, such as minority-owned and women-owned businesses, to participate in federally funded transportation-related projects. Such DBE participation has increasingly been achieved over the years with the appropriate guidance for traditional project delivery: design-bid-build. However, in recent times the onset of alternative project delivery methods, such as design-build (DB), has introduced challenges for state DOTs trying to implement the DBE program using traditional approaches. This paper presents a synthesis of strategies and resources being used in state DOTs to achieve …

The Role Of Stakeholders After Development Of The Baseline Scheduled Maintenance Program, Danita Baghdasarin

International Journal of Aviation, Aeronautics, and Aerospace

The principles of systems engineering can be applied to various aviation systems. This position paper emphasizes the importance of stakeholder collaboration in the various stages of the system life cycle, where the system is the aircraft scheduled maintenance program and the stakeholders are the constituents of the Industry Steering Committee (ISC): regulatory authorities, original equipment manufacturers (OEMs), and operators. The author discusses accidents with maintenance-related contributing factors, and highlights opportunities to improve coordination among stakeholders in order to ensure safe and effective maintenance.

Skip This Chore: Cleaning Your Air Conditioner Condenser Probably Won't Make It Work Better, David Yuill

Durham School of Architectural Engineering and Construction: Faculty Publications

I asked my neighbor who hoses off his air conditioner condenser every spring why he does it. “Because my dad always told me I had to,” he said.

Conventional wisdom like what my neighbor’s dad imparted may always seem right. But through my HVAC scholarship – the study of heating, ventilation and air-conditioning systems – I’ve learned that this particular presumption is probably wrong.

Heat Pump And Air Conditioning Grading Systems And Methods, Fadi Mohammad Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

An expectation module determines an expected average power consumption of a heat pump for a predetermined period as a function of indoor and outdoor temperatures of the building during the predetermined period. A difference module determines a power difference between an average power consumption of the heat pump during the predeter mined period and the expected average power consumption of the heat pump for the predetermined period. A grade determination module determines a grade of the heat pump for the predetermined period based on the power difference of the predetermined period. A reporting module generates a displayable report including the …

Building Envelope And Interior Grading Systems And Methods, Fadi Mohammad Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

A difference module determines differences between an outdoor ambient temperature and an indoor temperature, determines a first average of the differences , and determines a second average of the differences. A storing module stores a first data point, the first data point including the first average and a first total run time of a heating, ventilation, and/or air conditioning (HVAC) system, and stores a second data point, the second data point including the second average and a second total run time of the HVAC system. A fitting module fits a line to the first and second data points. An envelope …

How To Balance Intuitive And Analytical Functions Of Brain: A Neutrosophic Way Of Scientific Discovery Process, Florentin Smarandache, Victor Christianto, Robert Neil Boyd

Branch Mathematics and Statistics Faculty and Staff Publications

Initially this article stems from our discussion on math and mysticism, inspired by an article by Ralph Abraham. But it becomes a discussion on the role of intuition and inspiration in scientific discovery process. Hopefully this article will help anyone who aspires to be good scientists or engineers.

Experiencing Extreme Height For The First Time: The Influence Of Height, Self-Judgment Of Fear And A Moving Structural Beam On The Heart Rate And Postural Sway During The Quiet Stance, Mahmoud Habibnezhad, Jay Puckett, M. S. Fardhosseini, Houtan Jebelli, Terry Stentz, L. A. Pratama

Durham School of Architectural Engineering and Construction: Faculty Publications

Falling from elevated surfaces is the main cause of death and injury at construction sites. Based on the Bureau of Labor Statistics (BLS) reports, an average of nearly three workers per day suffer fatal injuries from falling. Studies show that postural instability is the foremost cause of this disproportional falling rate. To study what affects the postural stability of construction workers, we conducted a series of experiments in the virtual reality (VR). Twelve healthy adults—all students at the University of Nebraska-Lincoln—were recruited for this study. During each trial, participants’ heart rates and postural sways were measured as the dependent factors. …

Prediction Of Stress Increase At Ultimate In Unbonded Tendons Using Sparse Principal Component Analysis, Eric Mckinney, Minwoo Chang, Marc Maguire, Yan Sun

Durham School of Architectural Engineering and Construction: Faculty Publications

While internal and external unbonded tendons are widely utilized in concrete structures, an analytical solution for the increase in unbonded tendon stress at ultimate strength, ∆f_ps, is challenging due to the lack of bond between strand and concrete. Moreover, most analysis methods do not provide high correlation due to the limited available test data. The aim of this paper is to use advanced statistical techniques to develop a solution to the unbonded strand stress increase problem, which phenomenological models by themselves have done poorly. In this paper, Principal Component Analysis (PCA), and Sparse Principal Component Analysis (SPCA) …

A Practitioner’S Guide To Small Unmanned Aerial Systems For Bridge Inspection, Sattar Dorafshan, Robert J. Thomas, Calvin Coopmans, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Small unmanned aerial system(s) (sUAS) are rapidly emerging as a practical means of performing bridge inspections. Under the right condition, sUAS assisted inspections can be safer, faster, and less costly than manned inspections. Many Departments of Transportation in the United States are in the early stages of adopting this emerging technology. However, definitive guidelines for the selection of equipment for various types of bridge inspections or for the possible challenges during sUAS assisted inspections are absent. Given the large investments of time and capital associated with deploying a sUAS assisted bridge inspection program, a synthesis of authors experiences will be …

Hvac System Air Filter Diagnostics And Monitoring, Priotomo Abiprojo, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

A system and method for monitoring a heating, ventilation, or air conditioning (HVAC) system of a building is provided. A monitoring server, located remotely from the building, receives operating parameter data from a monitoring device at the building that measures an operating parameter of the HVAC system. The monitoring server generates a plurality of data clusters from the operating parameter data, each data cluster corresponding to operating parameter data generated during steady-state operation of the HVAC system. The monitoring server calculates an average operating parameter value for each data cluster. The monitoring server calculates normalized operating parameter values based on …

The Effect Of Behavioral Traits And Background On Engineering Students’ Decision-Making Process Compared To Business Students, Joe Scott

Williams Honors College, Honors Research Projects

This paper looks to narrow down the reasons that students undertake new credentials, specifically in sales fields. With a focus on character traits and upbringing, the goal is to ensure that there is a better understanding of the reasons that people undertake these credentials. The different benefits of credentials will be analyzed to determine the most influential reason that people would be willing to move forward. The combination of these factors will be used to provide recommendations of the best way to reach and influence the decision of the engineering students.

Integrating Multi-Source Weather Data For Deep Learning, Haidar A. Alanbari Mr

Dissertations and Theses

Big Data has been playing a major role in the domain of Deep Learning applications as many companies and institutions continue to find solutions and extract certain trends in fields of climate change, weather forecasting and meteorology. This project extracts weather events data from multiple data sources that are supported by National Centers for Environmental information (NCEI) [1] and Amazon Web Services (AWS) [2]. Data sources include Next-Generation NEXRAD [3] Doppler radar reflectivity, GOES-16 [4] multi-channel satellite imagery and NCEI [1] storm events. Then, it integrates and refines data in proper formats to be fed to the open-source Detectron [5] …

Energy Efficiency Evaluation Of Blower Heater Non-Purge Compressed Air Dryers, Alexandra M. Botts

Graduate Theses, Dissertations, and Problem Reports (ETD)

There are several compressed air dryers available for industrial use including, refrigerant, desiccant, and membrane. This research focuses on twin tower regenerative closed loop desiccant dryers, specifically: blower heater non-purge (BHNP) with and without cooling water pumps, Compressed-air Heater Purge (CHP), Blower Heater Purge (BHP), and Pressure Swing Heaterless (PSH). These styles of dryers are used mainly in industries that require extremely dry air such as, food manufacturing, medical air, or sensitive technology manufacturers. The research was conducted by collecting and analyzing real time current draw data on air compressors and associated dryers at eight different facilities (13 compressor systems) …