Nuclear Engineering Commons^™

Development Of Wireless Pebble For Packed Bed Heat Transfer Measurements And Machine Learning-Aided Accident Diagnosis For Loss Of Flow Accident (Lofa), Dongjune Chang

Nuclear Engineering ETDs

In the first study, a novel wireless pebble for scale experiments is developed, and a simple heat transfer experiment is conducted to determine the difference in the local heat transfer coefficient. Based on the fact that the use of Dowtherm A between approximately 57–87 °C is an alternative to the normal use of the FliBe temperature range of 600–700°C, a new-concept wireless device in a scaled experiment is introduced. This device consists of a 63.5 mm diameter metal shell and contains a built-in customized circuit board and battery for driving temperature measurements and wireless data transfer. The circuit board used …

Application Of Machine Learning To Chf Modelling, Mingfu He Mr

Nuclear Engineering ETDs

Accurate prediction of CHF is still a challenging issue in the study of boiling heat transfer. Many factors contribute to the occurrence of CHF and the various trigger mechanisms are proposed to unravel physical phenomena behind CHF. However, those mechanisms cannot cover the multiple primary factors simultaneously and even some of them still remain controversially unresolved. In light of the complexity and difficulty of CHF modelling, hereby an ensemble-learning based framework is proposed to model and predict CHF based on the databank of CHF. Some prior trials have been done for three primary aspects of dominant factors, that is, surface …

An Experimental And Numerical Investigation Of Flow Accelerated Flibe Corrosion, David B. Weitzel

Nuclear Engineering ETDs

Renewed interest in molten salt reactor technology has brought to light the need for a better understanding of FLiBe corrosion. To this end a flowing FLiBe corrosion test loop was designed to test the flow effects of FLiBe corrosion. The loop consists of a pump, melt tank, and stainless-steel tubing assembly that heats the molten salt to high temperatures and circulates it over test specimens. The experiment has been constructed and has completed initial shakedown testing.

To support the flowing FLiBe experiment, a numerical corrosion model that couples FLiBe electrochemistry, solid metal diffusion, and mass transport was implemented. The model …

Measurement And Analysis Of The Extreme Physical Shock Environment Experienced By Crane-Mounted Radiation Detection Systems, Matthew Boyd, Jennifer Erchinger, Craig M. Marianno, Gene Kallenbach

International Journal of Nuclear Security

At ports of entry, radiation detectors could be mounted on container gantry crane spreaders to monitor cargo containers entering and leaving the country. These detectors would have to withstand the extreme physical conditions experienced by these spreaders during normal operations. Physical shock data from the gable ends of a spreader were recorded during the loading and unloading of a cargo ship by two hard mounted PCB Piezotronics model 340A50 accelerometers and two Lansmont SAVER 9X30 units (with padding). The majority of large shocks were observed in the vertical direction. The Lansmont units recorded mean shocks of 22.215 ± 1.174 and …

Compositional Analysis Of Cerium And Cesium In Rapid Setting Cement As An Immobilization Agent For Nuclear Waste, Riyadh M. Motny

Theses and Dissertations

A feasibility of rapid setting cement (RSC) as an agent of immobilization for certain elements such as fission products or radioactive materials was explored. Cerium (Ce) and cesium (Cs) have been selected as a surrogate for U and/or Pu and fission products, respectively, in this study in three phases. In Phase I, RSC was evaluated for physical properties (e.g., porosity, density, pH values, etc.) using two groups methods—the cement powder at different concentrations of Ce (2 – 10 wt%) with deionized water (DIW) and artificial seawater (ASW). The results showed that the final setting time and compressive strength of RSC …

Numerical Modeling Study Of A Neutron Depth Profiling (Ndp) System For The Missouri S&T Reactor, Mubarak Mohammed Albarqi

Doctoral Dissertations

”For decades, Neutron Depth Profiling has been used for the non-destructive analysis and quantification of boron in electronic materials and lithium in lithium ion batteries. NDP is one of the few non-destructive analytical techniques capable of measuring the depth profiles of light elements to depths of several microns with nanometer spatial resolution. The technique, however, is applicable only to a handful of light elements with large neutron absorption cross sections. This work discusses the possibility of coupling Particle Induced X-ray Emission spectroscopy with Neutron Depth Profiling to yield additional information about the depth profiles of other elements within a material. …

Air Ingress And Heat-Driven Flow Relaminarization In A Very High Temperature Reactor (Vhtr), Apoorva Rudra

Dissertations and Theses

Very High Temperature Reactors (VHTRs) are one of six Generation IV reactors that have been proposed for DOE’s Next Generation Nuclear Plant. In addition to using gaseous coolants, VHTRs also display benefits of passive safety systems including intra-core natural circulation for heat removal in accident scenarios. However, a number of substantial engineering challenges are expected in VHTRs, and due to the high temperatures of the coolant involved, material behavior in various components needs to be better understood. Our work focuses mainly on two key phenomena that could lead to localized hot spots in the VHTR reactor core if not addressed …

Electrochemical Separation Of Multivalent Species On A Liquid Bismuth Cathode In Licl-Kcl Eutectic For Used Nuclear Fuel Reprocessing, Michael Woods

Theses and Dissertations

The presence of group I/II fission products (Cs-137, Sr-90, and Ba-137) within molten salt nuclear processes degrades operational efficiencies by contributing to increased radiation levels in the case of material handling processes or to loss of criticality in the case of a reactor. While methods such as zone freezing and ion exchange have been proven for the separation of these fission products in LiCl-KCl salts, they require extra equipment and processing steps. Addition of a liquid metal electrode to molten salt media, such as the electrorefiner of a pyroprocessing scheme or the salt cleaning stage of a molten salt fast …

Development Of A Switchable Radioisotope Generator, Kyle Mitchell Paaren

Doctoral Dissertations

The Switchable Radioisotope Generator utilizes alpha-induced reactions to produce a combination of photons, neutrons, and protons with varying fluxes dependent on target materials and source geometry. The activity/strength of the secondary radiation is further controlled by manipulating the number of alpha particles that can interact with the target material(s). Analytical equations were solved to confirm secondary radiation production from target materials using average cross sections from TENDL data. TENDL and JENDL data was confirmed by analytically solving for the total alpha-induced cross sections. This information was used to produce the provisional and utility Patent No: US20190013109A1. TENDL data was then …

Design And Characterization Of A Strong Positron Source At The Mstr Beam Port, Raed Atiah Alsulami

Doctoral Dissertations

“For many years, slow positron sources have found uses in diverse fields including medical physics, nuclear physics, biology, surface science, exotic atom research and space science. The purpose of this work is to design and optimize a reactor-based positron source at the Missouri University of Science and Technology Reactor (MSTR) beam port and quantify its intensity. Monte Carlo simulations using the MCNP6 code were used to model the positron production and moderation processes at the MSTR beam port. The thermal neutron flux at the beam port was determined experimentally and used in the source definition of the radiation transport simulations. …

Plenum-To-Plenum Heat Transfer Characteristics Under Natural Circulation In A Scaled-Down Prismatic Modular Reactor, Salman Mohammed Alshehri

Doctoral Dissertations

“Gas-cooled reactor (GCR) is being developed under the Next Generation Nuclear Plant Program (NGNP) in nuclear engineering studies. As the world searches for an energy source with high energy density, clean, abundant, and storable nature to avoid global warming issues, GCR seems to be a promising solution, particularly the possibility of producing hydrogen. Studying and developing the safety analysis and GCR technologies are required for the optimum design and safety of GCR system. Multiphase Reactors Engineering and Applications Laboratory (mReal) at Missouri University of Science and Technology (S&T) has developed a natural convection heat transfer test facility with one riser …

Computational Fluid Dynamics Modeling And Comparison Of Advanced Techniques For Heat Transfer Augmentation For Nuclear Applications, Salman Mohammed Alzahrani

Doctoral Dissertations

“Passive safety is the most important feature of NuScale’s reactor designs. Twist tape is one passive heat enhance heat technique. The present research investigated thermo-hydraulic characteristics of natural and forced convection of water under different configurations of twisted tape inserted in tube as well as NuScale rod bundles for uniform wall heat flux using computational fluid dynamics (CFD) using ANSYS Fluent 18.1. Results for twist tape inserted in tube under natural circulation showed that heat transfer enhanced and pressure drop increased to 28% and 102.8% over the plain tube respectively. Regularly spaced tapes, and different widths of the twisted tapes …

Experimental Investigation Of Liquid Contact In The Developing Post-Dryout Chf Flow Boiling Regime Using Surface Mounted Thermistors, Hiralkumar Harshadbhai Patel

Doctoral Dissertations

"Understanding heat transfer in the post-critical heat flux (CHF) flow boiling regime is important for determining the performance of the heat transfer equipment for various industrial applications requiring high heat transfer rates, e.g., heat exchangers, boilers, chemical and nuclear reactors. Liquid can be present in the core of the flow channel in the form of entrained liquid droplets, especially immediately downstream of film dryout. These droplets are suspected to provide an important heat transfer mechanism as they impinge on the heated wall. The objective of the current study is to investigate liquid contact with the heated wall in this flow …

Microstructural Evolution Of Zirconium Carbide (Zrcₓ) Ceramics Under Irradiation Conditions, Raul Florez

Doctoral Dissertations

A comprehensive understanding of the microstructural evolution of Zirconium Carbide (ZrC₂) ceramics under irradiation conditions is required for their successful implementation in advanced Gen-IV gas-cooled nuclear reactors. The research presented in this dissertation focusses on elucidating the ion and electron irradiation response of ZrC₂ ceramics. In the first part of the research, the microstructural evolution was characterized for ZrC₂ ceramics irradiated with 10 MeV Au³⁺ ions up to doses of 30 displacement per atom (dpa) at 800 ºC. Coarsening of the defective microstructure, as a function of dose, was revealed by transmission electron microscopy analysis. …

Reactor Configurations To Support Advanced Material Research, Thaqal Mazyad Alhuzaymi

Doctoral Dissertations

"The research goal is to configure a research reactor with multi-spectral capability for advance material research. This required the consideration of high and low-power levels alongside advanced fuel with high physical density and low enriched ²³⁵U. Selected fuel was U-10Mo with 19.75% ²³⁵U enrichment. The fuel and control rods system geometries were adopted from Missouri S&T Reactor (MSTR).

A high-power configuration (HPC) at 2 megawatts and low-power configuration (LPC) at 200 kilowatts were considered. Neutronic performances of the configurations were modeled using Monte Carlo N-particle (MCNP) transport code, version 6. Thermal-hydraulic analysis was performed with ANSYS Fluent. The …

Development And Characterization Of Nanostructured Steels And High Entropy Alloys For Nuclear Applications, Andrew Kalevi Hoffman

Doctoral Dissertations

"Nuclear reactor materials are subjected to a harsh environment including high temperatures and radiation fluences. In order to extend the lifetime of current light water reactors (LWRs) and realize the development of advanced Gen IV nuclear reactors new materials must be developed which can withstand such an environment. This thesis involves two approaches to solving this materials problem: advanced manufacturing of current commercial alloys using severe plastic deformation (SPD) and the development of new advanced high entropy alloys (HEAs).

Because SPD is effective at achieving grain refinement, this technique was used to obtain material having a high volume fraction of …

Au@Tio2 Nanocomposites Synthesized By X-Ray Radiolysis As Potential Radiosensitizers, Maria C. Molina Higgins

Theses and Dissertations

Radiosensitization is a novel targeted therapy strategy where chemical compounds are being explored to enhance the sensitivity of the tissue to the effects of ionizing radiation. Among the different radiosensitizers alternatives, nanomaterials have shown promising results by enhancing tumor injury through the production of free radicals and reactive oxygen species (ROS). In this work, Gold-supported titania (Au@TiO₂) nanocomposites were synthesized through an innovative strategy using X-ray irradiation, and their potential as radiosensitizers was investigated. Radiosensitization of Au@TiO₂ nanocomposites was assessed by monitoring the decomposition of Methylene Blue (MB) under X-ray irradiation in the presence of the nanomaterial. …

Development Of The University Of New Mexico Spectrometer For High-Resolution Fission Product Yield Data, Richard Emery Blakeley

Nuclear Engineering ETDs

Well-defined fission product yield data has been of increasing interest in various applications within the nuclear industry. With this need in mind, a fission fragment mass spectroscopy system was designed and developed at the University of New Mexico in collaboration with the Los Alamos National Laboratories with a stated goal of attaining a mass resolution of ≤ 1 % (FWHM/centroid) for light fragments and near 1 % for heavy fragments. The mass spectrometer utilized in this work consists of a transmission time-of-flight detection system to measure fission product velocity and an axial ionization chamber to measure the fission product energy, …

Investigating The Electrodeposition Of Plutonium And Curium For Safeguarding The Electrorefiner, Chantell L. Murphy

Nuclear Engineering ETDs

This research investigated the electrochemical deposition behavior of plutonium (Pu) and curium (Cm) for safeguarding the electrorefiner (ER) in a pyroprocessing facility. The main goal of this investigation was to evaluate the feasibility of using a safeguards concept called the neutron balance method to account for Pu in the ER. The neutron balance method relies on a known Pu/Cm ratio and measures neutrons from Cm-244 coming into and leaving a unit operation to track Pu. The application of the neutron balance approach for pyroprocessing facilities requires that Pu and Cm remain together in all extraction, product recovery, and waste streams. …

Exploration Of Radiation Damage Mechanism In Mems Devices., Pranoy Deb Shuvra

Electronic Theses and Dissertations

We explored UV, X-ray and proton radiation damage mechanisms in MEMS resonators. T-shaped MEMS resonators of different dimensions were used to investigate the effect of radiation. Radiation damage is observed in the form of resistance and resonance frequency shift of the device. The resistance change indicates a change in free carrier concentration and mobility, while the resonance frequency change indicates a change in mass and/or elastic constant. For 255nm UV radiation, we observed a persistent photoconductivity that lasts for about 60 hours after radiation is turned off. The resonance frequency also decreases 40-90 ppm during irradiation and slowly recovers at …