Geological Engineering Commons^™

Post-Eruption Deformation Processes Measured Using Alos-1 And Uavsar Insar At Pacaya Volcano, Guatemala, Lauren Schaefer, Zhong Lu, Thomas Oommen

Michigan Tech Publications, Part 1

Pacaya volcano is a persistently active basaltic cone complex located in the Central American Volcanic Arc in Guatemala. In May of 2010, violent Volcanic Explosivity Index-3 (VEI-3) eruptions caused significant topographic changes to the edifice, including a linear collapse feature 600 m long originating from the summit, the dispersion of ~20 cm of tephra and ash on the cone, the emplacement of a 5.4 km long lava flow, and ~3 m of co-eruptive movement of the southwest flank. For this study, Interferometric Synthetic Aperture Radar (InSAR) images (interferograms) processed from both spaceborne Advanced Land Observing Satellite-1 (ALOS-1) and aerial Uninhabited …

Characteristics And Composition Of Magnetic Concentrates Of Bottom Ash Samples From Two Types Of Thermal Power Plants In Odisha, India, Subir Kumar Das

Coal Combustion and Gasification Products Journal Archive

Aluminosilicate bottom ash samples were examined from a thermal power plant in Talcher (sample NT-BA) and in Sambalpur (sample HR-BA), Odisha, India, to determine magnetic particle morphology, internal structure, mineralogy, mineral chemistry, ash fusion temperature, chemical composition, and leaching characteristics. The Talcher plant has adopted pulverized coal combustion, whereas the Sambalpur plant uses circulating fluidized bed combustion boiler technology. For NT-BA, most magnetic particles were ideal solid spheres (ferrospheres) with diverse morphological features (smooth, granular, dendritic and skeletal, porous, spotted, polygonal, and hollow [magnetite cenospheres]). For HR-BA, magnetic particles were subspherical, oval, and angular and showed widely varying surface morphologies, …

Distribution Of Uranium And Other Radionuclides In Coal And Coal Combustion Products, With Discussion Of Occurrences Of Combustion Products In Kentucky Power Plants, James C. Hower, Shifeng Dai, Greta Eskenazy

Coal Combustion and Gasification Products Journal Archive

Uranium and thorium are part of the mineral assemblages within coals. Uranium can also occur in organic associations, particularly in low-rank coals. While the average U concentration in coals is 2.9 ppm for low-rank coals and 1.9 ppm for bituminous and higher rank coals, high concentrations are known from certain low-rank and thin coals and from coals in areas associated with U mineralization. No high-U coals are mined for power production in the United States. Uranium and Th in coal combustion products are found in amounts more or less in proportion to their concentrations in the feed coal. Not being …

Carbon Dioxide Adsorption Studies On Fly Ash Zeolites, Denitza Zgureva

Coal Combustion and Gasification Products Journal Archive

In this study, the potential of fly ash zeolites (FAZ) Linde (LTA) and faujasite (FAU) to adsorb carbon dioxide (CO2) was investigated in view of the results of implementation in postcombustion carbon-capture technologies. Adsorption isotherms of selected samples were measured at 273.15 K by a Micromeritics Tristar II 3020 surface analyzer. The highest adsorption capacity was obtained for FAZ with a FAU structure synthesized by a two-stage fusion hydrothermal process from fly ash (FA) that was composed of 65 wt% amorphous components. The adsorption capacity for this sample reached a value of 136.40 mg CO2/g FAZ at atmospheric pressure, a …

Analysis Of Scientific Investigations Related To Reclamation Of Surface Mining Control And Reclamation Act Permitted Coal Mines With Coal Combustion By-Products, Kimery C. Vories

Coal Combustion and Gasification Products Journal Archive

In the United states, the placement of coal combustion by-products (CCBs) (i.e., fly ash, bottom ash, boiler slag, flue gas desulfurization material, and fluidized bed combustion material) in coal mines has been an area of controversy. Federal and state governments, universities, the National Energy Technology Laboratory, and industrial research organizations have taken an active role in encouraging and promoting technological advances, research, and technology transfer related to the use of CCBs at coal mines. CCBs have been placed at Surface Mining Control and Reclamation Act of 1977 (SMCRA) permitted mines since 1977 to serve the following purposes: (1) a seal …

Coal Ash By-Product From Shanxi Province, China, For The Production Of Portland–Calcium Sulfoaluminate, Tristana Y. Duvallet, Thomas L. Robl, Kevin R. Henke, Yongmin Zhou, David Harris

Coal Combustion and Gasification Products Journal Archive

Twenty bulk samples were collected from ponded coal combustion ash in Shanxi Province, China, as part of an investigation of their beneficiation potential. The samples were shipped to the University of Kentucky, where they were chemically analyzed. The samples were highly consistent in chemistry, falling within the ASTM C-618 class F compositional range. The particle size of the ponded ash was relatively coarse, with only ,7% by weight on average, falling below 200 mesh (75 mm) particle size. The bulk of the material (.80%) was within 50 by 200 mesh (equivalent to 300 by 75 mm). X-ray diffraction investigation combined …

Effect Of Coal Fly Ash Leachate On The Bioluminescence Intensity Of Vibrio Fischeri, Shiro Ikeda, Irena Kostova, Hideaki Sekine, Yoshika Sekine

Coal Combustion and Gasification Products Journal Archive

Coal fly ash is a residue of coal-fired thermoelectric power plants (TPPs) and is mostly dumped in ash ponds or landfill sites, even though it potentially contains significant amounts of water-soluble hazardous contaminants. Bioassay using the bioluminescent bacterium *Vibrio fischeri* is known to be applicable for assessing the short-term and sublethal toxicity of complex mixtures without the need for precise chemical characterization. However, this type of bioassay is potentially adversely influenced by the pH-induced protein denaturation of cells. Because coal fly ash leachates often have alkaline or acidic properties, when applying the *V. fischeri*-based bioassay to the samples, we need …

Influence Of Coal-Fired Power Plant Emissions Regulations And Consequent Engineering Controls And Coal-Supply Modifications On Fly Ash Chemistry And Petrology: Examples From Kentucky Power Plants, Madison M. Hood, John G. Groppo, Michelle N. Johnston, James C. Hower, Herek L. Clack, Diego S. De Medeiros, Silvio R. Taffarel, Cesar M.N.L. Cutruneo, Luis F.O. Silva

Coal Combustion and Gasification Products Journal Archive

The chemistry and petrology of fly ash are controlled by a number of factors: (1) chemistry of the feed coal (and added fuels, such as petroleum coke, tires, biomass, etc.), (2) particle size of the fuel feed (controlled by pulverized fuel vs. cyclone combustion, maintenance of pulverizers, etc.), (3) design of the boiler and pollution-control system, and (4) temperature of the flue gas at the collection point. In general, for any electrostatic precipitator or baghouse system, the concentrations of volatile trace elements in fly ash will increase with a drop in the flue gas temperature and a decrease in the …

Assessment Of Highway Condition Using Combined Geophysical Surveys, Abdallah Alhadi Dera

Doctoral Dissertations

"Four pavement sections were investigated using ground penetrating radar (GPR) and Ultrasonic Surface Wave (USW). The objective of this research was to compare the effectiveness of two non-destructive geophysical tools, GPR and the PSPA, in assessing the condition of the pavements, composed of different construction materials. The GPR data were acquired using a 1.5 GHz antenna along five traverses spaced at two ft. intervals approximately 1000 ft. long. On the other hand, the PSPA data were acquired at the stations spaced at 1000 ft. along the five GPR traverses. Core samples were collected at each site to constrain the interpretation …

Geophysical Imaging Of Karst Features In Missouri, Jeremiah Chukwunonso Obi

Doctoral Dissertations

"Automated electrical resistivity tomography (ERT) supported with multichannel analysis of surface waves (MASW) and boring data were used to map karst related features in Missouri in order to understand karst processes better in Missouri. Previous works on karst in Missouri were mostly surficial mapping of bedrock outcrops and joints, which are not enough to define the internal structure of karst system, since most critical processes in karst occur underground. To understand these processes better, the density, placement and pattern of karst related features like solution-widened joints and voids, as well as top of bedrock were mapped. In the course of …

Identifying Shallow Subsurface Stratigraphy And Voids Using Dispersive Characteristics Of Electromagnetic And Surface Waves, Payman Hajiani

Doctoral Dissertations

"This dissertation presents the results of three manuscripts on spectral analysis of electromagnetic and seismic surface waves to detect subsurface stratigraphy and voids. In the first manuscript, a new technique was developed by utilizing spectral analysis of surface waves to detect subsurface openings. This technique applied the concept of group delay to evaluate the effects of subsurface voids on the phase shift domain. Seismic data sets were acquired at different sites where the shape, size, and depth of the void varied. In all surveys, the time delay technique precisely identified the locations of the subsurface openings. The second manuscript presents …

Integrated Geophysical Approach Using Electrical Resistivity Tomography And Multichannel Analysis Of Surface Wave In Assessing Wilson Spring Development, Ibrahim E. Ahmed

Doctoral Dissertations

"This research investigated fractured zones leading to preferential flow paths of Wilson Spring. In this context, electrical resistivity tomography (ERT) data and multi-channel analyses of surface waves (MASW) data were acquired at studied site with the purpose of mapping a variable depth to top of bedrock and geological structures.

Interpretation of the boreholes, MASW, and ERT data indicated that a depth to top of rock does vary significantly at the studied site due to many solution-widened fractures. Multiple near-vertical solution-widened fractures were mapped in the studied site based on the interpretation of the ERT data. The mapped solution-widened fractures appear …

Reconstructing Lithofacies Of The Norphlet Formation (Jurassic) As Potential Exploration Targets: Little Cedar Creek And Brooklyn Fields, Southwest Alabama, Catherine E. Henry

Electronic Theses and Dissertations

The Norphlet Formation is a Jurassic-aged siliciclastic unit located across the southeastern United States and offshore Gulf of Mexico. The eolian dune sands present in the Norphlet Formation serve as oil and gas reservoirs, making the formation of particular interest to oil and gas companies. Stable Appalachian ridges are the source of the Norphlet Formation, however deposition is related to complex faults and structures resulting from movement of the Louann Salt. Erosion of the ancestral Appalachian Mountains resulted in the deposition of four main lithofacies: basal shales, conglomerates and conglomeratic sandstones, the Denkman Sandstone member, and a redbed succession. Additionally, …

Imaging Reinforced Concrete: A Comparative Study Of Ground Penetration Radar And Rebarscope, Abhishek Kodi

Masters Theses

"Geophysical techniques have been playing a very vital role in subsurface imaging in the recent past. Technology has been making it both reliable and convenient to utilize non-destructive geophysics techniques like Ground Penetration Radar, Induction current based Rebarscope, Seismic methods, ERT, etc. The applications range from shallow subsurface investigation of Bridge decks to old tunnels, mapping of rabars in a pre-existing construction and analyzing the concrete strength.

The thesis constitutes of a comparative study and analysis of a Ground Penetration Radar system and a Rebarscope. Individual parameters obtained directly from the study and obtained indirectly from the study shall be …

Developing An Idealistic Model To Characterize And Optimize A Photovoltaic Battery Systems, Pavani Reddy Nalladimmu

Masters Theses

"Solar energy is one of the most abundant and clean energy sources of renewable energy. Due to its unsteady nature, most photovoltaic systems require a solar storage system. Ultracapacitors have proven to be an effective solar energy storage component due to their wide range of input voltages and high power density. This research focuses on characterizing the performance of a PV/UCAP hybrid storage system to meet required household loads at various locations throughout the US as a backup energy source. A calibrated empirical model was developed to characterize system performance. A load profile was designed based on a typical 2 …

Acoustic Behavior Of Soil Reinforced With Grass Roots, Blake Armstrong

Electronic Theses and Dissertations

Civil engineering practice has shown that vegetative roots on slopes and streambanks can substantially increase shear strength of soil and reduce erosion. Research has been done to understand and quantify the effect. Most studies have been conducted on slopes and streambanks with woody vegetation. Past research has used a perpendicular root model to predict increase in cohesion, or shear strength, due to the mobilization of roots' tensile strength. Acoustics can be used to monitor internal changes of soil by interacting with soil particles and interstitial fluids. Compressional wave, or p-wave, velocity can be used to predict changes in effective stress …

An Integrated Completion And Reservoir Modeling Methodology For Horizontal Shale Wells: A Montney Formation Example, Rashid S. Kassim, Larry K. Britt, Shari Dunn-Norman, Bryan Lang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The Montney Formation is one of the largest unconventional resources in North America covering from southwestern Alberta to northeast British Columbia. The Montney Formation has natural gas, natural gas liquids (NGL) and oil from conventional and unconventional reservoirs. The first multiple fractured horizontal well (MFHW) was drilled in 2005. However, since the first MFHW, different methods were proposed to optimize completion designs in the Montney Formation. Some of the optimized completions utilized the "operational effectiveness" of high-rate slick-water fracture designs while other designs utilized energized fracturing fluids. What has been missing was an integrated methodology that utilizes all available data …

Nitrogen Gas Flooding For Naturally Fractured Carbonate Reservoir: Visualisation Experiment And Numerical Simulation, Zhaojie Song, Jirui Hou, Zhongchun Liu, Fenglan Zhao, Shijun Huang, Yong Wang, Jieheng Wu, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Tahe Naturally Fractured Carbonate Reservoir has implemented nitrogen gas flooding since 2013, with daily oil production of 7580 bbls and oil recovery increment of 0.83% by the end of 2015. However, the presence of fractures significantly affects gas swept volume and production performance, so large amount of oil reserves is poorly flooded due to gas channeling through fractures. The fluid flow mechanisms in fractured models were discussed in order to improve field gas flooding efficiency. Based on the geological constrains of Tahe Oilfield, fractured models with different apertures were fabricated using acrylic glass to model carbonate matrix wettability and for …

Laboratory Evaluation Of A Real-Time Coaxial Cable Casing Imager For Wellbore Integrity Monitoring, Yurong Li, Runar Nygaard, Baokai Cheng, Wenge Zhu, Hai Xiao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Leakage is one of the major concerns in a geological carbon sequestration project due to the adverse environmental consequences. The main leakage risk of CO₂ through a thick, low permeable cap rock is identified to be along wells, especially in sedimentary basins that have a history of oil and gas exploration and production. To pursue a robust and cost-effective real-time monitoring technology for CO₂ leakage risk detection along the wellbore, a permanently downhole deployed coaxial cable casing imaging system is developed and tested for various deformation modes in laboratory in this paper. The casing imager consists of a …

Lifetime And Effectiveness Evaluation Of Ceramic Pot Filters, Carlo Salvinelli

Doctoral Dissertations

"Poor water quality is a major contributing factor to disease in developing countries. Ceramic pot filters (CPFs) represent an effective and sustainable technology for poor communities, but the characterization of CPF lifetimes is on-going, and the water production seems to be the limiting factor. This dissertation describes laboratory and field investigations conducted to characterize the parameters that impact CPF effectiveness and lifetime in terms of water production and treatment efficacy, both under controlled and real use conditions.

CPF initial flow rate is the most common quality control parameter, but it may not be representative of the long-term effectiveness of the …