Engineering Education Commons^™

Finding The Balance: A Technical Writing Assignment During A Co-Op Work Experience, Lindsay Corneal, Debbie Morrow

Presentations

The mandatory three semester co-op work experience in the engineering programs at Grand Valley State University allows students to apply their education to real engineering situations. As part of the regular assessment of the co-op work experiences, site visits are held between faculty, students, and the employers. It has very often been noted by employer supervisors that students perform well technically but still lack polish communicating in a professional setting. To address this, a project was launched to incorporate online writing instruction as academic content associated with the Co-op II semester, with a technical proposal writing assignment as the major …

Unguided Cyber Education Techniques Of The Non-Expert, Seth A. Martin

Theses and Dissertations

The United States Air Force and Department of Defense continues to rely on its total workforce to provide the first layer of protection against cyber intrusion. Prior research has shown that the workforce is not adequately educated to perform this task. As a result, DoD cybersecurity strategy now includes attempting to improve education and training on cyber-related concepts and technical skills to all users of DoD networks. This paper describes an experiment designed to understand the broad methods that non-expert users may use to educate themselves on how to perform technical tasks. Preliminary results informed subsequent experiments that directly compared …

Motivating Airmen To Engage With Technical Education: Experimentation And Analysis Using Modern Gamification Techniques, Landon G.M. Tomcho

Theses and Dissertations

The development and integration of computer systems into today’s society and the subsequent growth of cyber as a warfighting domain has led to changes in military and civilian conflict. Several traits unique to cyber, including disruption and fast pace of change, has led to issues never before seen in the military environment, especially with educating and training. A new approach that leverages crowd-sourced content has been proposed. This approach relies on motivating military members to voluntarily engage with technical (cyber) education. The application of gamification, a design practice aimed at increasing user engagement by targeting core motivators in humans, in …

(Poster) Pneumatically Assisted Autocutter: Providing A Safe Workplace Environment For People With Disabilities, Ryan Kallenberger, Brian Galliher, Laura Johnson, Melanie Moore, Joseph Herzog, Renny Fernandez, Najmus Saqib

ASEE IL-IN Section Conference

We present a pneumatic autocutter to help workers with disabilities for reduced operator fatigue, increased efficiency, thereby giving enhanced capabilities when working on a production line without worrying about their ability to effectively do their jobs. We are students in a sophomore level six sigma based course through the R.B. Annis School of Engineering at the University of Indianapolis. The specific process of production being discussed involves cutting bulky cardboard frames with a metallic wire-mesh covering. The current process requires a considerable amount of physical labor from the operator; prolonged work results in gradial operator debility and injury. For Gateway …

(Poster) Citizens Energy Group: Mobile Water Distribution System For Providing Water And Reducing Plastic Waste, Alex Pruitt, Alysa Epperson, Jonathen Key, Victor Antoñon Rodriguez, Paul Talega, George Ricco, Suranga Dharmarathne, David Olawale, Najmus Saqib, James Emery

ASEE IL-IN Section Conference

During the 2017-2018 year, Citizens Energy Group partnered with the R.B. Annis school of engineering to develop a portable system to distribute water to people at outdoor events. During that academic year, initial designs and a small scale, functional prototype were completed. This year we built the full scale version. Throughout this project, we have implemented the Design for Six Sigma (DFSS) methodology to guide the design process. Within the R.B. Annis School of Engineering, this methodology has been adapted into the DesignSpine process. It’s a gate based process that uses gateways at key points in the design process to …

A Model For Incorporating Undergraduate Research Into An Engineering Curriculum, Douglas Stamps

ASEE IL-IN Section Conference

A model is described for incorporating undergraduate research into an engineering curriculum through a vertically integrated design sequence. The sequence is composed of five courses: one each during the spring semester of the freshmen through junior years and two courses during the senior year. Each course offers skills that provide scaffolding for students to contribute to a team performing an engineering design project or research project. Teams are composed of freshmen through seniors (i.e., vertically integrated) and led by seniors. A strength of the model for undergraduate research is that upper level students can mentor lower level students, which allows …

Writing Children’S Stories To Improve Engineering Student’S Communication With Non-Engineering Audiences, Benjamin D. Mcpheron, Katelyn J. Butler

ASEE IL-IN Section Conference

One of the biggest challenges for students in science and engineering is communicating technical information to a non-technical audience. Students may struggle because they are not adept writers, because they cannot divorce the ideas from the jargon, or because they simply don't understand the material well enough to explain it to someone else. To attempt to address this issue, this study proposes the use of children’s stories to help students practice writing for a target, non-technical audience. To measure the efficacy of this method, junior level engineering students in an electronics course in Fall 2018 were asked to write children’s …

Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai

ASEE IL-IN Section Conference

Application of Computational Tools to Spaghetti-Based Truss Design

Statics and Strength of Materials are two foundational courses for Mechanical/Civil Engineering. In order to assist students in better understanding and applying concepts to a meaningful design task, SolidWorks and theoretical calculation were used for a spaghetti-bridge design contest with the constraints of given maximum weight and allowable support-material weight. As the first step of this iterative designing process, both extrude feature and structural member were introduced to model planar bridge trusses. Then SolidWorks’ Statics module was used to run FEA analysis of the structural performance in efforts to optimize the …

Innovative Remote Smart Home For Immersive Engagement, Kevin B. Martin, Abul Azad, Mohammed Adnan Shareef, Mrinal Roy

ASEE IL-IN Section Conference

An openly accessible, remotely operated smart home will be demonstrated as a tool for students to learn about residential energy usage and environmental impacts. Specifically, the demonstration unit provides classrooms an engaging experience that teaches students about energy efficiency technologies and how their behavior will have an impact on energy usage and the environment. It is expected that as students become aware of and understand how various energy efficiency technologies work barriers to their adoption will be lowered. The use of a web accessible, remote laboratory dramatically reduces lab setup time and equipment cost/space requirements for educators. Special attention is …

Development Of A Set Of Pre-Class Videos For Electromagnetic Theory, Benjamin Mcpheron, Josiah D. Kunz

ASEE IL-IN Section Conference

One important aspect of experiential learning is allowing students time to reflect on new concepts before the application of the material. Most commonly, this is attempted by assigning readings from a textbook, but research suggests that few students complete these readings. This discouraging fact has prompted the use of other resources, such as videos, to supplement pre-class readings in order to introduce new material. Previous work has been completed by this author to produce pre-class videos for use in an introductory circuits course. This paper extends that work to the development of pre-class videos for a senior level electrical engineering …

Student Success And Retention From The Perspectives Of Engineering Students And Faculty, Amy Chan-Hilton

ASEE IL-IN Section Conference

Student retention and success is a complex issue, with many factors that impact an individual student’s retention and these factors varying across all of our students. At the University of Southern Indiana (USI), efforts within engineering, as well as across the college and university, have included intentional academic support services (such as expanded advising and tutoring services) and student development programs and extracurricular activities to foster student communities and a student’s sense of belonging. In addition, evidence indicates that implementing curricular changes across an engineering program and within specific courses, such as implementing active learning, instructional innovations, and high-impact practices, …

Review Of Educational Technology: Closing The Gap Between Modern Technology And The College Engineering Classroom, David Pinkerton, Krishna Pakala

Mechanical and Biomedical Engineering Faculty Publications and Presentations

This paper aggregates information from past and current studies regarding the implementation of technology in engineering classrooms and identifies the most promising ideas, technologies, and techniques. This paper provides insight into best practices for implementing technologies to improve the education of engineering students. This paper provides recommendations to adopt non-traditional teaching methods. Educational tools and techniques are evaluated on the basis of: Adoption and Assimilation, Access, Community, Intellectual Presence, Student Perception, and Development of Social and Professional Skills. Best practices are highlighted with descriptions of the technologies and techniques that were found most promising.

Evaluation And Modeling Of The Effect Of Tool Edge Radius On Machined Surface Roughness In Turning Uns A92024-T351 Aluminum Alloy, Ning Fang, P. Srinivasa Pai

Engineering Education Faculty Publications

Tool edge radius plays a significant role in affecting the surface integrity of machined products. The vast majority of existing research, however, takes no account of the effect of tool edge radius in the evaluation and modeling of machined surface roughness, an essential indicator of surface integrity. The present study fills this important research gap and has performed a total of 45 turning experiments on Unified Numbering System (UNS) A92024-T351 aluminum alloy with carefully selected cutting tools with three levels of tool edge radii. This article describes the experimental setup and measurements of tool edge radius and machined surface roughness. …

Easy Exam, Sarthak Dabhi

Electronic Theses, Projects, and Dissertations

Easy Exam is web-based educational software which allows professors to take and students to give exams. This project focuses on making an effortless process for professors to make an exam, to grade exams for all students, and to create class statistical analysis reports about all exam-taking students. At the end of the exam, students can see their report with analytics based on topics in the exam. This web-based software will help students to identify their weaknesses and strengths. So, students can focus on their weaknesses and improve their knowledge. Furthermore, this software will help the professors to identify which students …

Standardisation In Construction Cost Control, Charles Mitchell

Other Resources

Poster presentation submitted as to the School of Surveying and Construction Management Research and Innovation Industry Evening, March 2019.

5th/6th Graders And Preservice Teachers Explore Engineering And Coding In A Combined After-School Technology Club/Educational Technology Course, Jennifer Kidd, Sam Sacks, Krishnanand Kaipa, Kelly Rippard

Teaching & Learning Faculty Publications

Elementary schools are increasingly encouraged to adopt STEM education efforts that include engineering and programming, yet pre-service teachers (PSTs) are not traditionally prepared to teach these subjects. This pilot study describes an innovative preparation experience designed to help PSTs gain experience and confidence in these areas. As part of an undergraduate educational technology course, PSTs led an after-school technology club at a local public school. PSTs enrolled in the course worked alongside fifth and sixth grade students on a series of collaborative design challenges that culminated in the creation of animal-inspired robots. The “WoW Club”, as it came to be …

Design Thinking As A Framework For Teaching Packaging Innovation, Javier De La Fuente, Irene Carbonell, Mary Laporte

Journal of Applied Packaging Research

Students in scientific/technical-oriented disciplines struggle with achieving good levels of innovation when exposed to design problems. Research indicates the need for implementing alternative pedagogical approaches in technical curricula that enhance students’ creative skills. The purpose of this study was to evaluate the implementation of a cross-disciplinary pedagogical approach with a focus on teaching innovation in the field of packaging engineering at a university in the United States. A Design Thinking Project-Based Learning (DTPBL) approach was used to improve the levels of innovation in student work. Its outcomes were compared with those of a Traditional Project-Based Learning (TPBL) approach. The implementation …

Disciplinary Learning From An Authentic Engineering Context, Catherine Langman, Judith Zawojewski, Patricia Mcnicholas, Ali Cinar, Eric Brey, Mustafa Bilgic, Hamidreza Mehdizadeh

Journal of Pre-College Engineering Education Research (J-PEER)

This small-scale design study describes disciplinary learning in mathematical modeling and science from an authentic engineeringthemed module. Current research in tissue engineering served as source material for the module, including science content for readings and a mathematical modeling activity in which students work in small teams to design a model in response to a problem from a client. The design of the module was guided by well-established principles of model-eliciting activities (a special class of problem-solving activities deeply studied in mathematics education) and recently published implementation design principles, which emphasize the portability of model-eliciting activities to many classroom settings.

Two …

Task Affect And Task Understanding In Engineering Problem Solving, Oenardi Lawanto, Angela L. Minichiello, Jacek Uziak, Andreas Febrian

Engineering Education Faculty Publications

Within the self-regulated learning literature, motivation is considered to be an essential feature of students’ self-regulatory processes. Additionally, task affect (i.e., personal objectives and task value) is thought to influence students’ self-regulatory processes; insufficient task affect may lead to failures to self-regulate effectively. In a school setting, task affect is a form of motivation for completing the course tasks in order to attain course-level goals that are inherently valued. In this study, motivation is operationalized as students’ personal objectives and task values, and self-regulation refers to students’ understanding of tasks (also called task interpretation skill) involved in a course. This …

"Mentoring Is Ethical, Right?": Women Graduate Students And Faculty In Science And Engineering Speak Out, Laura Gelles, Idalis Villanueva, Marialuisa Di Stefano

Engineering Education Faculty Publications

The relationship between graduate students and their research advisors within academia is pivotal to the development and success of the research enterprise. Graduate students rely on their faculty advisor to be a source of information, a departmental negotiator, and a role model to guide their professional and ethical behavior. However, if an advisor does not fully recognize a student’s best interest or they are unaware of how to be an “ethical mentor”, they may overlook the unique social capital of the graduate student (e.g., background, culture) and jeopardize the research relationship. This work aims to explore how women graduate students …