Mechanical Engineering Commons^™

Artificial Neural Networks As The Solution Of Inverse Heat Conduction Problems In Multidimensional Domains, Andrea Carolina Martinez Mundarain

Theses and Dissertations

Surface heat flux measurement is essential in various industrial applications including atmospheric entry of space vehicles, machining processes, non-destructive testing and more. While direct measurement of surface heat flux is known to be a very difficult, if not infeasible, task, acquiring temperature measurement from sub- surface locations are often viable. The problem of evaluating the surface heat flux using internal temperature measurements is known as an inverse heat conduction problem (IHCP). IHCPs are considered as mathematically ill-posed as they are highly sensitive to measurement error. This research presents a solution based on the implementation of artificial neural networks (ANNs) to …

Synthesis Of Durable Zeolite 13x Insertion Coatings And Scaled-Up Experimental Demonstration For Co2 Capture, Daniel Jamil Hocheimy

Theses and Dissertations

Minimizing the energy requirement for capturing carbon dioxide (CO₂) from post-combustion sources is critical to efficient industrial decarbonization and subsequent mitigation of the effects of climate change. The current portfolio of CO₂ capture technologies includes absorption, membrane separation and packed bed adsorption, which suffer from high energy and temperature requirements, scalability, and location dependency issues. Adsorption-based systems could cater to these concerns; however, their current embodiments primarily use packed adsorbent bed design and electricity-driven vacuum pumps to regenerate them. While simple and easy to fabricate, these designs are not scalable and cannot use heat to regenerate them …

System Identification For Motion Control Of Unmanned Aerial Vehicles Platform, Raj Ramesh Agarwal

Theses and Dissertations

Comprehensive research on Unmanned Aerial Vehicles (UAV) system identification for motion control parameters is presented in this thesis, with a focus on the necessity of precise control and improved performance. Using Pseudorandom Binary Sequence (PRBS) and Normally Distributed Random Numbers, it presents a unique technique for excitation of UAV dynamic systems. It also shows how effective random signals are in time-domain identification for precise control in a range of flying circumstances. The piece of research includes a thorough analysis and implementation of various approaches and its further improvements, highlighting the benefits and drawbacks of each. These approaches include the free …

Quantifying Hurricane Effects On Housing: Evaluating Damage, Loss, And Shelter Demands Using Historical And Simulated Storm Tracks, Adish Deep Shakya

All Theses

This research introduces an advanced framework which employs parametric wind field models for peak wind speeds, and building fragility curves, loss functions, and demographic data to estimate for estimating housing damage and loss. The uninhabitable units immediate displaced households, short-term and long-term shelter need households are determined. with a particular focus on those eligible for FEMA assistance. The framework's validity is reinforced by a high correlation in the analysis of recent hurricane events between estimated numbers of displaced households and actual FEMA aid recipients, where FEMA aids about 20-60% of the predicted long-term displaced households. A novel application of the …

Deep Reinforcement Learning Of Variable Impedance Control For Object-Picking Tasks, Akshit Lunia

All Theses

The increasing deployment of robots in industries with varying tasks has accelerated the development of various control frameworks, enabling robots to replace humans in repetitive, exhaustive, and hazardous jobs. One critical aspect is the robots' interaction with their environment, particularly in unknown object-picking tasks, which involve intricate object weight estimations and calculations when lifting objects. In this study, a unique control framework is proposed to modulate the force exerted by a manipulator for lifting an unknown object, eliminating the need for feedback from a force/torque sensor. The framework utilizes a variable impedance controller to generate the required force, and an …

The Effect Of Football Facemask Design Variability On Dynamic Impact Performance And Quasi-Static Stiffness, Adam W. Smith

All Theses

This research addresses the role of facemasks in helmet systems, focusing on their dynamic impact performance and material properties. A total of 150 facemasks from 30 types and five helmets were tested both quasi-statically and dynamically. The facemasks were grouped by style and helmet type for comparison. Dynamic testing involved three different locations and two speeds, with data collected for maximum angular velocity and linear acceleration. Quasi-static stiffness, performed at two locations, was compared with collected dynamic results to determine the strength of relationship. A concussion metric, HARM, was calculated from collected data and compared across style groups.

Significant differences …

The Effect Of Extended Saltwater Absorption And Uv Cure On The Compressive Properties Of Msla 3d-Printed Photopolymer Resin Samples With Printing Variations, Suzanne Dixon

Theses and Dissertations

Liquid Crystal Display (LCD) 3D printers, also known as Masked Stereolithography Apparatus (MSLA), is a type of vat polymerization printing technique that cures liquid resin into a solid object. This technique is relatively new. Consequently, there is a shortage of detailed research on the impact of long-term environmental exposure on the MSLA-printed materials. The research within this document informs engineers and scientists of resin compressive properties after extended exposure to saltwater and ultraviolet (UV) light. Saltwater absorption of the material was analyzed at atmospheric pressure, 30-psi, 60-psi, and 90-psi; the samples reached saturation in saltwater after 56 days. The variation …

Fabrication And Performance Demonstration Of Compact Adsorption Heat Pump, Faraz Ege

Theses and Dissertations

Addressing global environmental concerns requires a shift to eco-friendly energy sources, particularly in cooling applications where traditional vapor-compression systems rely on harmful refrigerants and electricity. Thermally-driven cooling systems, like adsorption heat pumps, offer promise with their environmentally friendly refrigerants such as water and use of low-temperature heat sources, including solar energy or waste industrial heat. This dissertation undertakes a comprehensive investigation into the development and optimization of compact adsorption heat pumps, aiming to address the efficiency and environmental challenges inherent in conventional cooling systems.

This research begins by introducing a novel insertion coating technique for fabricating MIL-101 (Cr) adsorbent layers …

Computational Fluid Dynamics Study Of Perforated Monopiles, Mary Kathryn Walker

Theses and Dissertations

Monopiles are used in the construction of offshore wind turbines and typically have a design life of 25 to 50 years. Over their lifecycle, monopiles are exposed to a corrosive saltwater environment, facilitating a galvanic oxidation process that quickly degrades the structure. This process can be mitigated by coating the monopile in a protective barrier and implementing cathodic protection techniques. Historically, monopile designers assumed the interior of the pile would be completely sealed and the galvanic corrosion process would eventually consume all the available oxygen, halting the reaction. However, penetrations made in the pile wall for conduit often leaked and …

Evaluation Of Beach-Fx — Beach Nourishment Planning Model – Miami Beach Case Study, Brennan Chase Banks

Theses and Dissertations

Miami Beach, located on the Southeast coast of Florida, is a concerning location for coastal erosion because of the increasing intensity and frequency of tropical storms, nuisance flooding, and accelerated sea-level rise due to climate change. Miami Beach is famous for its beautiful beaches, making it a location of high interest for tourists, citizens, and investors. It is vital for coastal practitioners to accurately model coastal processes, beach evolution, and storm damage during the planning stage of coastal protection projects. The U.S. Army Corps of Engineers developed the Beach-fx model as a tool for engineers, planners, and economists to …

Experimental And Numerical Analysis Of Laminar And Transitional Flow Through Annular Corrugated Pipes, Joseph Russell Sargent

Theses and Dissertations

This dissertation presents studies on pressure loss through annular corrugated pipes to determine a friction factor coefficient using nitrogen. Ten different corrugated pipes’ geometries were evaluated via testing and experimentation. The ratio of corrugation height to inner diameter varied from 0.233 to 0.333 and the ratio of corrugation pitch to inner diameter varied from 0.181 to 0.446. Nitrogen flow rates between 0.25 to 94.4 standard liters per minute were used, resulting in Reynolds numbers, based on the corrugated pipe inner diameter, from 100 to 23,000. The experimental set-up was validated using smooth-pipe pressure loss measurements and the derived friction factor …

Thermal Conductivity Of Thin Porous Ceramic Coatings: An Analytical And Experimental Study, Lei Zhao

Theses and Dissertations

An analytical model of the thermal conductivity of the porous yttrium-stabilized zirconia (YSZ) layer used in the thermal barrier coatings (TBCs) is presented. Such high-temperature resistant coatings are essential to protect the metallic components of gas turbine engines. The model calculates the conductivity based on the coating's porosity, pore size distribution, and pore morphology, including the individual pore cross-section area, aspect ratio, and orientation, which are extracted from the scanning electron microscopy images. The model was verified through comparisons with numerical simulation results from a multiphysics software tool. A laser temperature gradient test was performed to validate the analytical model …

Analysis Of Drying Behavior Of Robocasted Barium Titanate, Abigail Ortega

Open Access Theses & Dissertations

Finding an adequate ceramic formulation for material extrusion is a time-consuming process. The necessary equipment may be unavailable to perform the desired test. This study demonstrated an alternative to observe a material after extrusion to understand its drying process. This study focused on 55 solid loading volume percent and a 39 solid loading volume percent, each with two different binder treatments focusing on fresh same day made binder, a 30 day old, aged binder and lastly an artificial binder obtained by a fuming process. Firstly, a formulation was created and loaded onto a pressure-based syringe to be extruded with a …

Novel Vector Assignment Approach For Inherent Strain Modeling Of Laser Powder Bed Fusion Manufacturing, Lucas M. Morand

All Dissertations

The expansion of the design space due to additive manufacturing (AM) has been a large motivator for the success of this family of processes. Despite the complexity of the physics in metal laser powder bed fusion AM causing significant stresses and strains in finished parts, the design advantages and subsequent performance improvements continue to drive the expansion of AM. Because the trial-and-error approach to AM part development is cost prohibitive, simulation of prints has become crucial. However, full thermo-mechanical simulation is susceptible to the same pitfall of time and computational cost in order to attain part-scale results. The development of …

Renewable Energy Misinformation: A Literature Based Approach To Rebutting False Claims, Matthew Ard

McNair Research Journal SJSU

No abstract provided.

Experimental Analysis Study Wave Drift Force Of Moored Floating Production Units (Fpu), Arifin Rifliansah, Wibowo Harso Nugroho

Makara Journal of Technology

Drift forces caused by sea waves and currents are an important aspect that needs to be studied in planning moored floating structures, especially Floating Production Units (FPU) type ships which are operated for oil and gas exploration. This study describes the drift forces on the FPU which is subjected to environmental loads in the form of waves. The slow-drift movement that occurs in a moored FPU, and experiencing irregular waves is a very important problem. The complexity of determining drift forces analytically and numerically requires the use of hydrodynamics model test. In the model test on a certain model scale …

An Optimization Tool For A Standalone Photovoltaic System, Johanes Kasilima

Tanzania Journal of Engineering and Technology (TJET)

Stand-alone photovoltaic systems (SAPV) are often used in remote areas where access to grid electricity is limited. This system depends on solar energy. However, Photovoltaic (PV) systems need a greater initial investment than conventional sources of energy, and their effectiveness is reliant on a number of environmental conditions such as the unpredictable solar radiation. One step in reducing the investment cost of a PV system is determining the optimal size of solar PV components that minimize costs. This paper presents a Particle Swarm based optimization tool for sizing Stand-alone PV systems. The optimization tool selects the optimal Levelized Cost of …

Optimization Pump As Turbine Coupled To A Self-Excited Induction Generator Using Multi-Objective Genetic Algorithm, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

As a way of accelerating the deployment of affordable and clean renewable energy generation technologies, applying a pump working as a turbine coupled to a self-excited induction generator is gaining popularity in various areas including energy recovery and micro hydro systems. However, it is currently challenging to predict the performance of the PAT-SEIG system and there is no agreed-upon rule on the selection of the appropriate system to be installed at a particular site. This paper has presented multi-objective optimization to select the best operating point of the PAT-SEIG system. The results show that the peak efficiencies for the PAT …

Optimal Load Shedding During Service Restoration In Electrical Secondary Distribution Network Based On Reinforcement Learning, Rukia J. Mwifunyi

Tanzania Journal of Engineering and Technology (TJET)

Increased stress in traditional power systems results in blackouts due to voltage instability attributed to a mismatch between available capacity and load demand, especially in distribution networks. Service restoration schemes are designed to return power supply to the affected parts of the networks. The availability of insufficient supply is a complex problem that requires operational experience or an automatic system. The stochastic nature of load demand significantly impacts service restoration as it results in increased restored demand in case a fault occurs during off-peak hours and helps reduce overload if the fault occurs during peak hours. The study adopts an …

Assessment Of Risk Factors Related To Body Pain Complaints In Tanzania Construction Industry, Fatma K. Mohamed

Tanzania Journal of Engineering and Technology (TJET)

The construction industry is associated with risks that can result in musculoskeletal diseases. Although young male workers who are presumed to be healthy dominate the industry in Tanzania, body pain complaints have been widely reported. The aim of this study is to assess the prevalence and causes of body pains in workers. A cross-sectional study involving 396 workers was conducted. A chi square test was used for testing association of independent categorical variables and binary logistic regression analysis was used to determine predictors for body pain complaints. The results show that all study participants complained of at least one form …

Comparison Of Meteorological Drought Indices In Tanzania Using The Meteorological Drought Monitoring Software Package, Paul Ts Limbu

Tanzania Journal of Engineering and Technology (TJET)

Low precipitation, substantial evaporation, and an unequal distribution of precipitation throughout the area are the characteristics of drought, a climatic abnormality. This study used the Meteorological Drought Monitoring (MDM) software and monthly rainfall data from the Tanzania Meteorological Authority (TMA) to examine and compare the Deciles Index (DI), Standardised Precipitation Index (SPI), Percent of Normal Index (PNI), Rainfall Anomaly Index (RAI), Z-Score Index (ZSI), China-Z Index (CZI), and Modified China-Z Index (MCZI) for drought monitoring in Tanzania from 1988 to 2017. It was found that ZSI represented the dry years better than other indices, followed by DI, RAI, PNI, SPI, …

Information Model Based On Parameters Of A Combined Soil Preparation Until For Planting, Azmuddin Sadriddinov, Anvar Abdazimov, Faxraddin Mavlanov, Hursand Madrakhim Ugli Rakhimov

Technical science and innovation

The article describes in detail the development of a combined pre-sowing machine as a result of the literature analysis of the scientific research conducted on pre-sowing tillage machines and its use and working process. In addition, the article provides scientifically based information about the factors affecting the leveler-softener and previous work on their improvement. The current state of tillage before planting in Uzbekistan and the size of the tilled fields are studied and tabulated. In order to optimize the parameters of the developed machine and minimize costs, as well as to increase its efficiency, it is devoted to the creation …

Characterizing Brain And Skull Mechanics In The Minipig Using Magnetic Resonance Elastography, Shuaihu Wang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Computational models and simulation are important tools to investigate the mechanisms underlying traumatic brain injury (TBI); their accuracy depends strongly on accurate model parameters, including the mechanical properties of the brain and its interactions with the skull. However, most existing TBI modeling studies are performed using material properties derived from animal tissue obtained after death. Magnetic resonance elastography (MRE) provides a non-invasive method for estimating the mechanical properties of soft tissue. The overall objective of this thesis is to characterize the biomechanical properties of brain tissue and brain-skull interface in the minipig by using MRE. This was achieved through pursuit …

Electron-Phonon Interaction Mediated Gigantic Enhancement Of Thermoelectric Power Factor Induced By Topological Phase Transition., Zhi Li, Koushik Pal, Huiju Lee, Chris Wolverton, Yi Xia

Mechanical and Materials Engineering Faculty Publications and Presentations

We propose an effective strategy to significantly enhance the thermoelectric power factor (PF) of a series of 2D semimetals and semiconductors by driving them toward a topological phase transition (TPT). Employing first-principles calculations with an explicit consideration of electron-phonon interactions, we analyze the electronic transport properties of germanene across the TPT by applying hydrogenation and biaxial strain. We reveal that the nontrivial semimetal phase, hydrogenated germanene with 8% biaxial strain, achieves a considerable 4-fold PF enhancement, attributed to the highly asymmetric electronic structure and semimetallic nature of the nontrivial phase. We extend the strategy to another two representative 2D materials …

Guidelines For Data Collection On Energy Performance Of Higher-Education Buildings In Egypt: A Case Study, Hesham Safwat, Ahmed A. Abdel-Rehim, Iman El-Mahallawi, Abdelwahab Hussein, Engy Elshazly, Ahmad Elshamy

Mechanical Engineering

Reliable energy analysis of buildings relies heavily on high-quality data leading to proper indicators. Previous studies have highlighted the importance of data quality in analyzing energy usage in residential and non-residential buildings in order to transform declarations to actions, optimise energy efficiency policies and monitor progress and failures in countries. Collected data must adhere to national and international standards for energy performance in buildings. This study aims to provide practical guidelines for effectively collecting and preparing data suitable for evaluating energy performance in Egyptian higher-education (HE) buildings. The guidelines are developed based on a comprehensive case study, considering data availability …

Integrated Analysis Of Economic Optimization And Life Cycle Assessment For A Fully Modular Wheelchair Accessibility Ramp Utilizing Recyclable Materials, Nicolas Whelan

Honors Scholar Theses

In response to the growing emphasis on sustainability and accessibility in infrastructure development, this research paper delves into the optimization of economic opportunities presented by fully modular wheelchair accessibility ramps. By integrating principles of modularity, recyclability, and circular design, these ramps offer a promising solution to the dual challenges of accessibility and environmental impact. The study employs interdisciplinary methods, merging design, economics, and environmental sustainability, to evaluate the feasibility and potential of these innovative ramp designs. Central to the analysis is the application of a Life Cycle Assessment (LCA) to quantify the environmental impact and carbon footprint associated with modular …

Measuring Soot In A Novel Configuration For Diffusion Flames Fueled By Ethylene Doped With Iso-Dodecane, Christian Bjork

Honors Scholar Theses

Sustainable Aviation Fuels (SAFs) are seen as the path forward for decarbonizing hard-to-electrify sectors. Using SAFs over traditional fossil fuels abates carbon dioxide emissions but still may present soot emission problems. A milestone in the abatement of soot would be understating its formation mechanisms.

This study aims to quantify soot products resulting from an ethylene flame doped with iso-dodecane, a surrogate SAF component. The burner selected for the investigation is the novel Planar Mixing Layer Flame (PMLF) which allows the tracking of soot formation with the height above the burner (HAB) in a stable diffusion flame. A baseline ethylene-fueled flame …

Analyzing The Effects Of Atmospheric Turbulent Fluctuations On The Wake Structure Of Wind Turbines And Their Blade Vibrational Dynamics, Alayna Farrell, Fernando Ponta, Apurva Baruah

Michigan Tech Publications

In recent trends, a rising demand for renewable energy has driven wind turbines to larger proportions, where lighter blade designs are often adopted to reduce the costs associated with logistics and production. This causes modern utility-scale wind turbine blades to be inherently more flexible, and their amplified aeroelastic sensitivity results in complex multi-physics reactions to variant atmospheric conditions, including dynamic patterns of aerodynamic loading at the rotor and vortex structure evolutions within the wake. In this paper, we analyze the influence of inflow variance for wind turbines with large, flexible rotors through simulations of the National Rotor Testbed (NRT) turbine, …

Thermal Performance Investigation Of Thermoelectric Cooling System With Various Hot-Side Cooling Methods, Bowo Y. Prasetyo, Parisya P. Rosulindo, Fujen Wang

Makara Journal of Technology

Thermoelectric devices have been widely used in various applications, including cooling and power generation. The potential application of thermoelectric cooling systems has been studied. However, these systems still face challenges in achieving optimal performance compared with other cooling systems. Several factors, including the hot-side cooling method, influence the performance of thermoelectric systems. This study aimed to investigate the effects of different hot-side cooling methods on the thermoelectric performance and thermal behavior of thermoelectric cooling systems. The testing methods involved the combination of the thermoelectric module with five hot-side heat exchangers, including a square heatsink, a round heatsink, a two-pipe heat …

Aerodynamic Design And Analysis Of A Modified 2006 Mazda Miata, William N. Recher

Honors College Theses

Aerodynamic forces developed by automobiles have destabilizing effects at high speed. These forces tend to skew toward a vehicle’s rear which can present safety concerns, especially for rear-wheel-drive automobiles like the Mazda Miata. To address oversteer and high-speed instability, a vehicle’s design can be tailored to bring about aerodynamic balance and improve traction. LiDAR was used to bring the physical automobile into the digital space. Then, a splitter and diffuser were added to reduce the magnitude of the destabilizing forces. Next, the size and shape of the rear-wing required to balance the vehicle was calculated using a combination of parameters …