Mechanical Engineering Commons^™

Analysis And Optimization Of The Scheffler Solar Concentrator, Simone Alberti

Master's Theses

The Scheffler reflector is a new solar concentrator design which maintains a fixed focus while only having a single axis tracking mechanism. This design makes the construction and operation of high temperature solar concentrators accessible to developing nations. In this project, I wrote computer simulation codes to better understand the dynamics and the effect of deformation or deviations from ideal conditions in order to define necessary manufacturing and operational tolerances. These tools and knowledge drove the prototyping of new reflector concepts by myself and other students on my team. A fiberglass prototype was able to drive the cost of a …

Mega: An Energy Aware Algorithm For Self-Powered Wireless Sensor Networks In Sustainable Smart Infrastructure, Dong Qi, Yu Chen, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

Smart infrastructure is attractive for possessing many desirable features, such as uninterrupted monitoring of health conditions, timely response to damages, and human-infrastructure interactions. Embedded sensors that collectinformation are critical for decision making. However, the lifetime of electronic sensors is a constraint to infrastructure lifetime if sensors are physically embedded in the infrastructure at construction time. In this paper, we studied a self-powered wireless sensor network that harvests energy from mechan-ical vibration in the environment. A dynamic, hierarchical algorithm called MEGA is proposed that constructs clusters and elects the cluster head based on residue energy and energy harvest rate. Taking a …

Investigation Of Subgrid-Scale Mixing In Turbulent Plane Jets And Turbulent Jet Flames, Shuaishuai Liu

All Dissertations

The subgrid-scale (SGS) mixing of mixture fraction, temperature, and species mass fraction in turbulent partially premixed (Sandia) flames is studied. We focus on the effects of the SGS mixing regimes and the spatial relationships among the scalars on the SGS mixing of the species mass fractions. High resolution lines images are used to obtain the scalar filtered mass density function and the conditionally filtered diffusion. The results show that for small SGS variance the scalar fields have a relatively simple structure. For large SGS variance the structure is more complex. The spatial relationships among the scalars result in different SGS …

Autonomous Control And Automotive Simulator Based Driver Training Methodologies For Vehicle Run-Off-Road And Recovery Events, Paul Freeman

All Dissertations

Traffic fatalities and injuries continue to demand the attention of researchers and governments across the world as they remain significant factors in public health and safety. Enhanced legislature along with vehicle and roadway technology has helped to reduce the impact of traffic crashes in many scenarios. However, one specifically troublesome area of traffic safety, which persists, is run-off-road (ROR) where a vehicle's wheels leave the paved portion of the roadway and begin traveling on the shoulder or side of the road. Large percentages of fatal and injury traffic crashes are attributable to ROR. One of the most critical reasons why …

Particle Scavenging By Water Drops In An Ultrasonic Standing Wave Field, Weiyu Ran

All Dissertations

Currently the backbone of the world's energy supply is composed of fossil fuels. However, the combustion of fossil fuels results in the production of enormous quantities of particulate pollutants. The smog resulting from these particulate pollutants causes significant health problem for city dwellers. Wet scrubbers, which use a water spray to scavenge airborne particles, is one of the most widely used devices to control particulate pollutants. Typical wet scrubbers can scavenge particles with diameters bigger than 10 um, but it is inefficient in scavenging particles with diameters on the order of 1 um. Unfortunately these fine particles are more dangerous …

Me-Em Enewsbrief, December 2014, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Development Of A System Architecture For Unmanned Systems Across Multiple Domains, Charles Randall Breingan Jr.

Doctoral Dissertations and Master's Theses

In the unmanned systems industry, there is no common standard for systems components, connections and relations. Such a standard is never likely to exist. Needless to say, a system needs to have the components that are required for the application, however, it is possible to abstract the common functionality out of an individual implementation. This thesis presents a universal unmanned systems architecture that collects all of the common features of an unmanned system and presents them as a set of packages and libraries that can be used in any domain of unmanned system operation. The research and design of the …

Two-Dimensional Scalar Differential Equations For Transversely Varying Thickness Modes In Piezoelectric Plates And Applications In Acoustic Wave Resonator Sensors, Huijing He

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Generalizations are made for three types of well-known and widely used twodimensional scalar differential equations in the literature describing transversely varying thickness modes in piezoelectric plate resonators. They are for singly-rotated quartz plates, doubly-rotated quartz plates, and plates of crystals of class 6mm with the c-axis along the plate thickness, respectively. The purpose of the generalizations is to include the effects of surface mechanical loads such as mass layers or fluids for resonator -based acoustic wave sensor applications. Surface acoustic impedance is introduced to take into account various surface loads in a general manner for time-harmonic motions. Both unelectroded and …

Flex-16: A Large-Displacement Monolithic Compliant Rotational Hinge, Robert Mcintyre Fowler, Alex Maselli, Peter Pluimers, Spencer P. Magleby, Larry L. Howell

Faculty Publications

This paper describes the design, analysis, and testing of a large-displacement monolithic compliant rotational hinge, called the Flex-16. The Flex-16 achieves 90 of rotation from monolithic construction and is aimed for application as a compliant satellite deployment hinge. Five prototypes were fabricated from three different materials (polypropylene, titanium, and a carbon nanotube framework) on two different size scales (macro and micro). A parametric finite element model was created to rapidly analyze a variety of design identified during a configuration study. Prototypes were tested for their ability to reach 90 of rotation without failure or self collision, and for their nonlinear …

Mhttu Implementation Final Project Report, Angelica Ramirez, Julian Samayoa, Matt Keeble

Mechanical Engineering

Lawrence Livermore National Laboratory has invested considerable effort in developing fireproof high-efficiency particulate air (HEPA) filters. Due to the nature of LLNL’s research, the air leaving its lab facilities must be filtered before it is released into the atmosphere; thus, each laboratory is equipped with large banks of HEPA filters through which all internal air is exhausted. Over the years, however, fires have erupted in the labs and entire banks of HEPA filters have been destroyed, resulting in repairs and crucial downtime that prove costly.

Engineers and scientists alike have been seeking a permanent solution to this problem, and one …

Design And Testing Of A Nanosatellite Simulator Reaction Wheel Attitude Control System, Fredric William Long

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Attitude control of a satellite is required for the pointing of communications antennas and other instruments. For this reason, a control algorithm capable of precision pointing is important. Because the process of sending a satellite into space is time consuming and costly, ground-based methods of testing are paramount. A simulator is a low-cost, groundbased system made to mimic the conditions of a weightless satellite in space. The simulator used in this project controls attitude through applying torque to reaction wheels. The objective of this project is to derive and test a control algorithm for the attitude control of a satellite …

Low Speed Water Tunnel Testing, John J. Taylor

Theses and Dissertations - UTB/UTPA

Water tunnels are ideal for studying flow patterns for hydrodynamic effects. The functionality of the University of Texas-Pan American water tunnel was limited by not being able to measure forces and moments corresponding to flow patterns. This report delivers an experimental set-up for calibrating the velocity of the water and development of a load measuring system to relate simultaneous visual investigation. An in-depth parts breakdown of the SST-model pump and the dye injection system for flow visualization will be reviewed. Few balances have been made for water tunnels due to small and difficult to measure flow-induced forces. The motive is …

Designing A Biomimetic Testing Platform For Actuators In A Series-Elastic Co-Contraction System, Ryan Tyler Schroeder

UNLV Theses, Dissertations, Professional Papers, and Capstones

Actuators determine the performance of robotic systems at the most intimate of levels. As a result, much work has been done to assess the performance of different actuator systems. However, biomimetics has not previously been utilized as a pretext for tuning a series elastic actuator system with the purpose of designing an empirical testing platform. Thus, an artificial muscle tendon system has been developed in order to assess the performance of two distinct actuator types: (1) direct current electromagnetic motors and (2) ultrasonic rotary piezoelectric motors. Because the design of the system takes advantage of biomimetic operating principles such as …

Transient Heat Transfer Between A Magnetocaloric Packed Particle Bed And Stagnant Interstitial Fluid., Michael G. Schroeder 1988-

Electronic Theses and Dissertations

In the field of magnetocaloric heat pumps, many system models have been made. What most of these models lack is heat transfer occurring while there is no fluid motion. It is the objective of this paper to analytically determine and experimentally verify heat transfer with no bulk fluid motion. The addition of a pure dwell period to the typical magnetocaloric cycle was shown to have a positive performance impact in specific conditions. These conditions correspond to regenerators that are heat transfer rate limited in operation. The heat transfer mechanism for this particular case was shown to be pure conduction via …

Wear Resistant Polydopamine/Ptfe Nanoparticle Composite Coating For Dry Lubrication Applications, Samuel George Beckford

Graduate Theses and Dissertations

This dissertation presents an investigation into the effect of nanoparticle fillers and a polydopamine adhesive primer on the tribological performance of thin PTFE films. The principal objective of this investigation was to reduce wear in PTFE films, an issue which precludes the use of PTFE films in tribological applications requiring high durability. The friction and wear of the composite films were evaluated using a ball-on-flat configuration in linear reciprocating motion. It was found that the use of a polydopamine adhesive primer reduces the wear of PTFE films more than 600 times. X-ray photoelectron spectroscopy (XPS) results show that a tenacious …

Highly Transparent, Self-Cleaning, And Antireflective Nanoparticle Coatings, Corey Seth Thompson

Graduate Theses and Dissertations

Current solar panel technologies require a sheet of glass to serve as both mechanical support and to protect the cells from the environment. The reflection from the glass sheet can reflect up to 8% of the incident light, reducing the power output of the panel. Antireflective coatings can be used to allow more light to enter the panel to be converted into usable electricity. However, no solid thin film materials exhibit a low enough index of refraction to serve as antireflective coatings for common solar glass. The main goal of this research was to investigate the self-cleaning, antifogging, and antireflective …

Thermo-Physical Property Models And Effect On Heat Pipe Modelling, Devakar Dhingra

All Theses

Heat transfer devices find applications in various aspects of life. Be it residential, commercial or industrial application, efficient heat transfer is a challenge to all. Other than geometric design considerations and wick selection, the optimization of heat transfer in the heat pipe also depends on fluid selection. Heat pipe technology has proven to work efficiently with properly selected thermal fluid, from cryogenic temperatures to very high temperatures. Higher heat transfer ability through small temperature differences makes the heat pipe an efficient technology. Hence, it can be stated that selecting a proper working fluid enhances the heat transfer performance of a …

Direct Synthesis Of Methane From Co2-H2O Co-Electrolysis In Tubular Solid Oxide Electrolysis Cells, Long Chen, Fanglin Chen, Changrong Xia

Faculty Publications

Directly converting CO₂ to hydrocarbons offers a potential route for carbon-neutral energy technologies. Here we report a novel design, integrating the high-temperature CO₂–H₂O co-electrolysis and low-temperature Fischer–Tropsch synthesis in a single tubular unit, for the direct synthesis of methane from CO₂ with a substantial yield of 11.84%.

Development Of An Exteroceptive Sensor Suite On Unmanned Surface Vessels For Real-Time Classification Of Navigational Markers, Christopher Lloyd Kennedy

Doctoral Dissertations and Master's Theses

This thesis presents the development of an exteroceptive sensor suite for real-time detection and classification of navigational markers on Unmanned Surface Vessels. Three sensors were used to complete this task: a 3D LIDAR and two visible light cameras. First, all LIDAR points were transformed from the sensor’s reference frame to the local frame using a Kalman filter to estimate instantaneous vehicle pose. Next, objects were chosen from the LIDAR data to be classified using either Multivariate Gaussian or Parzen Window Classifiers. Both produce 96% accuracy or better, however, multivariate Gaussian ran considerably faster than the Parzen and was simpler to …

Enhancement Techniques Of Boiling Heat Transfer, Basim Qasim Ali Al-Sukaini

Doctoral Dissertations and Master's Theses

The aim of this study is to investigate pool boiling performance of water under atmospheric pressure by two techniques. The first method is by adding small amounts of surfactants, and the second way is by using structured surfaces.

The first technique is investigated experimentally with environmentally friendly surfactants. The surfactants chosen for the study are an ionic sodium lauryl sulfate (SLS), nonionic ECOSURF™ EH-14, and nonionic ECOSURF™ SA-9. It is observed that adding a small amount of surfactant alters the water boiling phenomenon significantly. Boiling curves for different concentrations are shifted to the left. The wall temperature drops greatly with …

Run-Time Hev Engine-Generator Power-Speed Optimization For Fuel Consumption And Emissions Reduction, Chester Paul Rowe Ii

Doctoral Dissertations and Master's Theses

As fuel economy and emissions standards become more stringent, Plug-in Hybrid Electric Vehicles (PHEV) using series architectures are being increasingly explored. Due to the decoupling of the Internal Combustion Engine (ICE) from the road, the primary control challenge in this architecture is the optimization of an ICE control law. A run-time Genset speed controller is presented for use during the charge-sustaining mode in a Series PHEV to find the optimal operating parameters for a conventional diesel engine coupled to an electric generator in terms of minimized fuel consumption and emissions generation. On board vehicle sensors provide real time data to …

Mitigation Of Moving Shocks In An Expanding Duct, Veraun Chipman

UNLV Theses, Dissertations, Professional Papers, and Capstones

Inviscid flow theory governs the bulk motion of a gas at some distance away from the walls (i.e. outside the boundary layer). That is to say, there are no viscous forces in the bulk flow, which is modeled using the Euler equations. The Euler equations are simply the Navier-Stokes equations with zero viscosity terms. An ideal inviscid fluid, when brought into contact with a surface or wall, would naturally slip right past it since the fluid has no viscosity. In real life, however, a thin boundary layer forms between the wall or surface and the bulk flow. Shock wave boundary …

Thermo-Mechanical Characterization Of Glass And Its Effect On Predictions Of Stress State, Birefringence And Fracture In Precision Glass Molded Lenses, Dhananjay Joshi

All Dissertations

The Precision Glass Molding (PGM) process was established as an economical and sustainable option for the production of aspherical glass optics to satisfy the increased industrial demand. Applications of precision molded aspherical lenses range from consumer electronics products such as cell phone cameras to defense and medical systems. An aspherical lens can eliminate the spherical and optical aberrations as compared to a spherical lens thus making the lens system more compact and lighter. In spite of being a clean and environmentally friendly process, the lens molding operation suffers from a few drawbacks such as lens profile deviation, stress birefringence/refractive index …

Carbon Black Mediated Conductive Polymer Composite, Mohamed Hussein Faris Ali

Theses

The central goal of this thesis is to produce electrically conductive nanocomposites made out of carbon black obtained from waste tires as filler into a polymeric matrix. Waste tires are discarded in substantial numbers on a daily basis, posing a significant environmental concern. By weight, about 25-35% of a tire is carbon black. Pyrolysis is a convenient and environmental friendly process to produce carbon black from tires. Due to carbon black’s low density, high electrical conductivity and economic feasibility, this thesis investigates the electrical conductivity of nanocomposites that utilizes carbon black particles as fillers. As a result of its modified …

The Development Of A Laminated Copolyester Electric Guitar, Addison S. Karnes

Electronic Theses and Dissertations

This thesis is an investigation of the fabrication and assembly methodologies employed in the development of a proof-of-principle prototype electric guitar composed of laminated copolyester. The objective of the project was to develop the processes and procedures to create an optimized physical and visual bond between layers to minimize vibratory dissipation, thus maximizing sustain. A high speed CNC router, abrasive waterjet, laser engraver-cutter, as well as various manual fabrication and assembly methods were investigated in the construction of the guitar prototypes. The lamination processes explored include low-temperature, heat-assisted pressure bonding, solvent and chemical welding, and contact adhesives. The project concluded …

Modular And Cooperative Medical Devices And Related Systems And Methods, Shane M. Farritor, Mark Rentschler, Amy Lehman

Department of Mechanical and Materials Engineering: Faculty Publications

The various embodiments disclosed herein relate to modular medical devices, including various devices with detachable modular components and various devices with pivotally attached modular components. Additional embodiments relate to procedures in which various of the devices are used cooperatively. Certain embodiments of the medical devices are robotic in vivo devices.

Anisotropic Complementary Acoustic Metamaterial For Canceling Out Aberrating Layers, Chen Shen, Jun Xu, Nicholas X. Fang, Yun Jing

Henry M. Rowan College of Engineering Departmental Research

In this paper, we investigate a type of anisotropic, acoustic complementary metamaterial (CMM) and its application in restoring acoustic fields distorted by aberrating layers. The proposed quasi two-dimensional (2D), nonresonant CMM consists of unit cells formed by membranes and side branches with open ends. Simultaneously, anisotropic and negative density is achieved by assigning membranes facing each direction ( x and y directions) different thicknesses, while the compressibility is tuned by the side branches. Numerical examples demonstrate that the CMM, when placed adjacent to a strongly aberrating layer, could acoustically cancel out that aberrating layer. This leads to dramatically reduced acoustic …

Modification Of A Single-Molecule Afm Probe With Highly Defined Surface Functionality, Fei Long, Bin Cao, Ashok Khanal, Shiyue Fang, Reza Shahbazian-Yassar

Michigan Tech Publications

Single-molecule force spectroscopy with an atomic force microscope has been widely used to study inter- and intramolecular interactions. To obtain data consistent with single molecular events, a well-defined method is critical to limit the number of molecules at the apex of an AFM probe to one or to a few. In this paper, we demonstrate an easy method for single-molecule probe modification by using the Cu-catalyzed alkyne–azide cycloaddition reaction. Excess terminal alkynes were covalently attached to the probe, and a bi-functional molecule containing an azide at one end and a carboxylic acid at the other was dissolved in the reaction …

Pseudo-Rigid-Body Models For Approximating Spatial Compliant Mechanisms Of Rectangular Cross Section, Issa Ailenid Ramirez

USF Tampa Graduate Theses and Dissertations

The objective of the dissertation is to develop and describe kinematic models (Pseudo-Rigid-Body Models) for approximating large-deflection of spatial (3D) cantilever beams that undergo multiple bending motions thru end-moment loading. Those models enable efficient design of compliant mechanisms, because they simply and accurately represent the bending and stiffness of compliant beams.

To accomplish this goal, the approach can be divided into three stages: development of the governing equations of a flexible cantilever beam, development of a PRBM for axisymmetric cantilever beams and the development of spatial PRBMs for rectangular cross-section beam with multiple end moments.

The governing equations of a …

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Society of Manufacturing Engineers (SME) Distinguished Faculty Advisor Award