Mechanical Engineering Commons^™

Drops In 2d, Said Shakerin

All Faculty Articles - School of Engineering and Computer Science

No abstract provided.

3d Infrastructure Condition Assessment For Rail Highway Applications, Teng Wang

Theses and Dissertations--Civil Engineering

Highway roughness is a concern for both the motoring public and highway authorities. Roughness may even increase the risk of crashes. Rail-highway grade crossings are particularly problematic. Roughness may be due to deterioration or simply due to the way the crossing was built to accommodate grade change, local utilities, or rail elevation. With over 216,000 crossings in the US, maintenance is a vast undertaking. While methods are available to quantify highway roughness, no method exists to quantitatively assess the condition of rail crossings. Conventional inspection relies on a labor-intensive process of qualitative judgment. A quantifiable, objective and extensible procedure for …

Development Of The Thermal Wire Embedding Technology For Electronic And Mechanical Applications On Fdm-Printed Parts, Daniel Abraham Marquez

Open Access Theses & Dissertations

Additive Manufacturing (AM) has increased in popularity and attracted much attention from many fields such as automotive, aviation, aerospace, and even the fashion industry. Since the early 2000s, Fused Deposition Modeling (FDM) technologies have been the most popular in the AM world ("Wohlers Talk" Popularity of FDM). These technologies have been mainly used for building parts for prototype and structural type of applications such as a fixture for components or a housing for mechanisms.

With the current state of the FDM technologies, the functionality of the parts that are printed are limited to the applications listed before or simply just …

Structural Design Of Liquid Oxygen/Liquid Methane Robotic Lander Janus, Mariana Chaidez

Open Access Theses & Dissertations

As the attempt to send humans to Mars has gained momentum in the last decade, the need to find alternative propellants that are safer, less toxic, and yields a better performance has become apparent [1]. Liquid methane and oxygen have emerged as a suitable alternative. In addition, the incorporation of liquid methane/liquid oxygen into the propulsion system has demonstrated an increase in engine performance, as well as a reduction in the volume, size and complexity of the propulsion system. In an attempt to further understand the technologies that are possible to develop using liquid oxygen (LO2) and liquid methane (LCH4), …

G-Code Generation For Multi-Process 3d Printing, Callum Peter Bailey

Open Access Theses & Dissertations

Since the inception of stereolithography in the 1980s, interest in 3D printing has exploded, with desktop 3D printers now commercially accessible to the general public. In recent years, next-generation multifunctional technologies have been developed, which combine 3D printing with other technologies such as wire embedding, foil embedding, CNC machining, and robotic component placement, enabling complex parts to be made on a single multifunctional machine.

However, the complexity of these integrated processes exceeds the capabilities of established design tools. To this end, this Thesis aims to develop a multi-functional design solution that can automatically generate final control code for next-generation multifunctional …

Shock Tube And Mid-Infrared Laser Absorption Measurements Of Ignition Delay Times And Species Time-Histories, Batikan Koroglu

Electronic Theses and Dissertations

Energy consumption has increased dramatically as the world advances and becomes more industrialized. Over the next twenty five years, the U.S. Department of Energy expects the energy demand to increase by 29% with majority of the new energy coming from natural gas (methane). Another promising fuel source for power generation and transportation is the biofuels. The biofuel use in the US is shown to have increased substantially in the last decade. There are serious environmental concerns associated with greenhouse (e.g. carbon-dioxide) and toxic gas emissions (e.g. nitrogen oxides and aldehydes such as propanal) due to deriving energy from natural gas …

Fiber Orientation Prediction And Strength Evaluation Of Composite Spur Gears Reinforced By Discontinuous Fiber, Nawrin Jahan

Electronic Theses and Dissertations

Composite materials have been extensively used for their important role in attenuation of components design, low specific weight, high mechanical performance, and excellent corrosion resistance offer significant advantages over metallic materials. These superlative properties can be attained by tailoring different material in an appropriate combination of the reinforcing phase (carbon fiber, alumina, etc.) and matrix phase (polymer, ceramic, metals, etc.). Carbon fiber reinforced composites are mostly used on intricate stress sensitive structures like wings of aero plane or gear. Amount of fiber, fiber type, and size of the fiber and the orientation of reinforcing fibers directly influence the mechanical properties …

Effects Of Defects On The Performance Of Hierarchical Honeycomb Metamaterials Realized Through Additive Manufacturing, Kazi Moshiur Rahman

Electronic Theses and Dissertations

Cellular metamaterials are of immense interest for many current engineering applications. Tailoring the structural organization of cellular structures leads to new metamaterials with superior properties providing lightweight and very strong/stiff structures. The incorporation of hierarchy to regular cellular structures enhances the properties and introduces novel tailorable metamaterials. For many complex cellular metamaterials, the only realistic manufacturing process is additive manufacturing (AM). The use of AM to manufacture large structures may lead to several types of defects during the manufacturing process, such as imperfect cell walls, irregular thickness, flawed joints, partially missing layers, and irregular elastic plastic behavior due to toolpath. …

Low Temperature Solution-Processed Sb:Sno2 Nanocrystals For Efficient Planar Perovskite Solar Cells, Yang Bai, Yanjun Fang, Yehao Deng, Qi Wang, Jingjing Zhao, Xiaopeng Zheng, Yang Zhang, Jinsong Huang

Department of Mechanical and Materials Engineering: Faculty Publications

Inorganic metal oxide electron-transport layers (ETLs) have the potential to yield perovskite solar cells with improved stability, but generally need high temperature to form conductive and defect-less forms, which is not compatible with the fabrication of flexible and tandem solar cells. Here, we demonstrate a facile strategy for developing efficient inorganic ETLs by doping SnO₂ nanocrystals (NCs) with a small amount of Sb using a low-temperature solution-processed method. The electrical conductivity was remarkably enhanced by Sb-doping, which increased the carrier concentration in Sb:SnO₂ NCs. Moreover, the upward shift of the Fermi level owing to doping results in improved …

Propagation Of Extensional Waves In A Piezoelectric Semiconductor Rod, C.L. Zhang, X. Y. Wang, W. Q. Chen, J. S. Yang

Department of Mechanical and Materials Engineering: Faculty Publications

We studied the propagation of extensional waves in a thin piezoelectric semiconductor rod of ZnO whose c-axis is along the axis of the rod. The macroscopic theory of piezoelectric semiconductors was used which consists of the coupled equations of piezoelectricity and the conservation of charge. The problem is nonlinear because the drift current is the product of the unknown electric field and the unknown carrier density. A perturbation procedure was used which resulted in two one-way coupled linear problems of piezoelectricity and the conservation of charge, respectively. The acoustic wave and the accompanying electric field were obtained from the equations …

Functional Performance Differences Between The Genium And C-Leg Prosthetic Knees And Intact Knees, Michael J. Highsmith, Jason T. Kahle, Rebecca M. Miro, M. E. Cress, Derek J. Lura, William S. Quillen, Stephanie Carey, Rajiv V. Dubey, Larry J. Mengelkoch

Mechanical Engineering Faculty Publications

Microprocessor prosthetic knees (MPKs) have advanced technologically, offering new features to decrease impairment and activity limitations for persons with transfemoral amputation (TFA). The Genium knee is functionally untested, and functional differences between it and intact knees are unknown. This study sought to determine whether Genium use improves functional performance compared with the C-Leg. A randomized experimental crossover design was used, with a cross-section of five nonamputee controls for comparison to nor­mal. Twenty community-ambulating persons with TFA were trained and tested for accommodation with study components. All subjects (n = 25) were assessed using the Continuous-Scale Physical Functional Performance-10 (CS-PFP10) …

User Involvement In The Partner Program Of The Educational Social Network, Ilya V. Osipov, Alex A. Volinsky, Anna Y. Praskikova

Mechanical Engineering Faculty Publications

The paper describes experiments to attract active online system users to the partner program. The objective is to grow the number of users by involving existing system users in viral mechanics. Several examples of user motivation are given, along with the specific interface implementations and viral mechanics. Viral K-factor was used as the metrics for the resulting system growth assessment. Specific examples show both positive and negative outcomes. Growth of the target system parameters is discussed.

Modeling And Control Of Fuel Cell-Battery Hybrid Energy Sources, Nima Lotfi

Doctoral Dissertations

"Environmental, political, and availability concerns regarding fossil fuels in recent decades have garnered substantial research and development in the area of alternative energy systems. Among various alternative energy systems, fuel cells and batteries have attracted significant attention both in academia and industry considering their superior performances and numerous advantages. In this dissertation, the modeling and control of these two electrochemical sources as the main constituents of fuel cell-battery hybrid energy sources are studied with ultimate goals of improving their performance, reducing their development and operational costs and consequently, easing their widespread commercialization. More specifically, Paper I provides a comprehensive background …

Methodology For Analysis Of Stress, Creep, And Fatigue Behavior Of Compliant Mechanisms, Joshua Allen Crews

Doctoral Dissertations

"A methodology is developed for analyzing stress within homogeneous and metallic-reinforced, fixed-free compliant segments and small-length flexural pivots. Boundary conditions related to the inclusion of metallic reinforcing components within a polymer compliant segment are investigated. The analysis method outlined herein relies on key outputs from the pseudo-rigid-body models (PRBMs). A method is presented for the redesign of compliant mechanisms to include metallic reinforcement to reduce stress while maintaining force-deflection behavior. Examples are provided in which a compliant segment is redesigned to include metallic reinforcement by using the stress equations developed from the PRBM. The effect of bonding between the polymer …

Research On Hybrid Manufacturing Using Industrial Robot, Zhiyuan Wang

Doctoral Dissertations

"The applications of using industrial robots in hybrid manufacturing overcome many restrictions of the conventional manufacturing methods, such as small part building size, long building period, and limited material choices. However, some problems such as the uneven distribution of motion accuracy within robot working volume, the acceleration impact of robot under heavy external loads, few methods and facilities for increasing the efficiency of hybrid manufacturing process are still challenging. This dissertation aims to improve the applications of using industrial robot in hybrid manufacturing by addressing following three categories research issues. The first research issue proposed a novel concept view on …

Repetitive Process Control Of Additive Manufacturing With Application To Laser Metal Deposition, Patrick M. Sammons

Doctoral Dissertations

"Additive Manufacturing (AM) is a set of manufacturing processes which has promise in the production of complex, functional structures that cannot be fabricated with conventional manufacturing and the repair of high-value parts. However, a significant challenge to the adoption of additive manufacturing processes to these applications is proper process control. In order to enable closed-loop process control compact models suitable for control design and for describing the layer-by-layer material addition process are needed. This dissertation proposes a two-dimensional modeling and control framework, with an application to a specific metal-based AM process, whereby the deposition of the current layer is affected …

Modeling And Evaluation Of Moisture Diffusion In Polymer Composite Materials, Zhen Huo

Doctoral Dissertations

"Fiber-reinforced polymer composites have extensive applications due to their high specific strength, improved product performance, low maintenance and design flexibility. However, moisture absorbed by polymer composites during the service life plays a detrimental role in both the integrity and durability of composite structure. It is essential to understand the moisture diffusion behavior and induced damage in polymer matrix composites under varying hygrothermal conditions. In Part I, the moisture diffusion characteristics in hybrid composites using moisture concentration-dependent diffusion method have been investigated. Also, a multi-stage diffusion model was proposed to explain the deviation of moisture diffusion behavior for sandwich composites from …

Computational Assessment Of Neural Probe And Brain Tissue Interface Under Transient Motion, Michael Polanco, Sebastian Bawab, Hangsoon Yoon

Mechanical & Aerospace Engineering Faculty Publications

The functional longevity of a neural probe is dependent upon its ability to minimize injury risk during the insertion and recording period in vivo, which could be related to motion-related strain between the probe and surrounding tissue. A series of finite element analyses was conducted to study the extent of the strain induced within the brain in an area around a neural probe. This study focuses on the transient behavior of neural probe and brain tissue interface with a viscoelastic model. Different stages of the interface from initial insertion of neural probe to full bonding of the probe by astro-glial …

Modeling Time-Dependent Performance Of Submerged Superhydrophobic Or Slippery Surfaces, Ahmed A. Hemeda

Theses and Dissertations

The goal of this study is to quantify the transient performance of microfabricated superhydrophobic surfaces when used in underwater applications. A mathematical framework is developed and used to predict the stability, longevity, and drag reduction benefits of submerged superhydrophobic surfaces with two- or three-dimensional micro-textures. In addition, a novel design is proposed to improve the drag-reduction benefits of lubricant-infused surfaces, by placing a layer of trapped air underneath the lubricant layer. The new design is referred to as lubricant–infused surfaces with trapped air, and it is designed to eliminate the long-lasting longevity problem of submerged superhydrophobic surfaces. The effectiveness of …

Effect Of Poisson’S Ratio On Material Properties Characterization By Nanoindentation With A Cylindrical Flat Tip Indenter, Md Mehadi Hassan

Electronic Theses and Dissertations

Nano indentation technology is commonly used to determine the mechanical properties of different kinds of engineering materials. The young’s modulus of the materials can be calculated with the load depth data obtained from an indentation test with a known Poisson’s ratio. In this investigation the NANOVEA micro/nanoindentation tester with a cylindrical flat-tip indenter will be used to find the elastic modulus, hardness and Pile up. Low carbon steel AISI1018, alloy steel AISI 4340 and aluminum alloy 6061 were selected for the case study. Finite element (FE) analysis using axisymmetric 3-D models used to establish the relationship between Poisson’s ratio and …

Remote Sensing Of Neutron And Gamma Radiation Using Aerial Unmanned Autonomous System, Alex Barzilov, Jessica Hartman, Ivan Novikov

Graduate & Professional Student Association Research Forum

With the continuing advancement of nuclear technologies, the detection and identification of radioactive material is a necessary part of commercial and government applications. There is a wide array of options available for detection and identification of material, but most rely on compact devices which are manually positioned. The deployment of robots equipped with detection equipment is not always feasible, especially in locations where there is considerable debris on the ground, or where there are low clearance areas. To solve this, the goal of this research was to design a remote sensing system for radiation using unmanned aerial vehicles (UAVs). A …

The Effects Of Carbon Fiber Misalignment On Composite Material Strength, Luke Stangler

Electronic Theses and Dissertations

Nondestructive Evaluation (NDE) is an effective way for determining material properties. More specifically, ultrasonic waves along with visual measurements from a microscope can be used to systematically determine the elastic modulus of single ply composites that are subject to an altered manufacturing process. In this approach, the magnitude of specific ultrasonic wave velocities is applied through Chirstoffel's equations to determine the necessary five elastic constants that describe the elastic modulus of transversely isotropic composites. On the other hand, fiber misalignment measurements are taken through via digital microscopy to satisfy a statistical approach for the determination of the same elastic modulus. …

Mechanical Property Characterization Of Polymeric Composites Reinforced By Continuous Microfibers, Ali Zubayar

Electronic Theses and Dissertations

Innumerable experimental works have been conducted to study the effect of polymerization on the potential properties of the composites. Experimental techniques are employed to understand the effects of various fibers, their volume fractions and matrix properties in polymer composites. However, these experiments require fabrication of various composites which are time consuming and cost prohibitive. Advances in computational micromechanics allow us to study the various polymer based composites by using finite element simulations. The mechanical properties of continuous fiber composite strands are directional. In traditional continuous fiber laminated composites, all fibers lie in the same plane. This provides very desirable increases …

Oscillating Heat Pipe Performance With Evaporator Section Modifications, Mitchell Hoesing

Electronic Theses and Dissertations

The continuous development of electronic components to become faster and smaller has led to an increasing problem with thermal management. Thermal management ensures that the component operating temperatures are within a safe range, which maintains performance and improves reliability and lifespan. Traditional thermal management devices, such as the extruded-fin heat sink, are incapable of maintaining the safe operating temperature range for current and future high heat flux cooling applications. A device that has the capability to meet this growing need is the oscillating heat pipe. Oscillating heat pipes (OHPs) are passive, two-phase cooling devices that have been shown to transfer …

The Effects Of Diffuser Exit Velocity And Distance Between Supply And Return Apertures On The Efficiency Of An Air Distribution System In An Office Space, Khaled Abdel Razzaq Saadeddin

Electronic Theses and Dissertations

The distance between supply air diffusers and return air grilles is an important design parameter that has not been properly investigated. Sometimes, design and installation constraints force the engineer or the contractor to place the return duct close to the supply duct which can have a huge impact on the overall efficiency of air distribution in the zone. When the return grille is too close to the supply diffuser, air by-passes the room and flows directly back into the return duct. By-passing of the air in a zone of a building will prevent the heat transfer and the circulation that …

Characterization Of Mechanical Properties Of Gamma Irradiated Additively Manufactured Articles For In-Space Manufacturing, Behzad Rankouhi

Electronic Theses and Dissertations

Recently, additive manufacturing (AM) has opened many doors to engineers across various industries, such as medical, bio-engineering, automotive and recently, aerospace. In an effort to contribute to the development of AM in aerospace industry, a series of experiments were designed to help understand the behavior of 3D printed parts and extend its capabilities and possible uses. The first chapter of this project will focus on understanding the mechanical behavior of additively manufactured articles. In this chapter, a comprehensive effort was undertaken to represent the strength of a 3D printed object as a function of layer thickness by investigating the correlation …

Using Photovoltaics To Power Electrochemical Chloride Extraction From Concrete, Sean Bond, Lynette O'Callaghan, Niall Holmes Dr., Brian Norton

Conference papers

Corrosion of embedded steel in reinforced concrete (RC) is a world-wide problem, that reduces structural performance and lifespan. Chloride attack may be a result of seawater, de-icing salts or contaminated admixtures, brought on by ingress of chlorides into the concrete. Electrochemical Chloride Extraction (ECE) is a non-destructive treatment for contaminated RC structures, that due to uncertainty of treatment times and applied current densities, is only 50% effective. It is often diesel powered has an environmental impact and often very costly due to the long treatment times. To improve the efficiency of ECE the influences of concrete resistance, cement type and …

Test 2140: John Deere 5075e Cab, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2170: John Deere 9470rx, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2168: Challenger Mt865e, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …