Mechanical Engineering Commons^™

Aluminum Boat Rotation Fixture, Kevin W. Heiskell, Nathaniel M. Conway, James S. Knowles, Austin J. Kehl

Mechanical Engineering

Aluminum fishing boats are widely used for various water-based activities, including fishing, transportation, and recreation. Their lightweight construction makes them ideal for maneuverability, particularly in regions like Australia. However, the manufacturing process presents challenges, specifically the need to weld both the interior and exterior seams of the hull. As the boat’s weight increases during assembly, flipping it becomes difficult and potentially hazardous. Traditional methods such as cranes or forklifts are inefficient and pose safety risks. To address this, our team developed a rotating fixture that secures the boat at two connection points, one at the bow and one at the …

In-Situ Defect Detection In Selective Laser Melting Using Convolutional Neural Networks, Ethan Gaigalas

Master's Theses

This thesis develops and trains a convolutional neural network (CNN) to classify defects in metal parts produced by selective laser melting (SLM) using acoustic emission (AE) data. The model successfully identified porosity and standard build layers with high accuracy but consistently struggled to classify lack of fusion (LOF) defects, regardless of input type, normalization, or class count. These results suggest that while AE signals contain distinguishable features for certain defect types, LOF signals may be too subtle or inconsistent for reliable detection. The study addresses the ongoing challenge of in-situ quality monitoring in metal additive manufacturing, where defects like cracks, …

Foot Pedal Assistive Device, Julian Rubinstein, Connor Jessen, Isabelle Utsler, Sydney Alexander

Mechanical Engineering

Individuals with lower-limb mobility problems may have trouble accurately locating the pedals of a three-pedal manual transmission car, and some medical conditions cause individuals to fatigue more quickly when driving. This project aimed to create a device that assists in locating the user’s feet, indicates to the user which pedals are currently in use, and provides a visual and physical warning if they are not in the correct place. The project sponsor, Alan Keizer, is the primary stakeholder in this project. This device will be designed specifically for Alan’s Subaru BRZ and will address Alan’s specific lower-limb mobility issues that …

Van Accessibility, Ann Larson, Camelia Anne Noureddine, Stephanie Rose Ruzicka, Kayla Joanne Gowey

Mechanical Engineering

The SLO Achievement House provides resources and activities for their clients, including daily trips to different parts of the community, to keep their clients connected to society. These trips require the clients, many of whom struggle with general mobility and strength, to step up to the high entrance of a van or company car. This daily activity poses a challenge both physically and emotionally for the clients. The current solution utilizes commercially available step stools, which lack handrails, overall stability, and adequate step depth. The Achievement House needs a stool or ramp tailored to their client’s needs and their specific …

7lr-C Upper Limb Dancing Prosthetic, Victor Ochoa, Zoe Kelemen, Ged Mulingtapang, Marley Paltiel

Mechanical Engineering

Ella Wallis, a student at Cal Poly and performer in the Cal Poly Drag Club with a trans humeral upper limb difference, wants a prosthetic device that allows for a large range of motion and high degree of articulation to help them better dance in the style of voguing, allowing them to express themselves further while performing. The prosthetic arm is body-driven and relies on momentum to reposition. It attaches to the user through a harness, which is clipped to a socket with elastic straps to not impede the shoulder’s range of motion. The design contains urethane resin, aluminum, stainless …

Drone Package Delivery System, Aiden Tyler Sim, Ryan Anders O'Toole, Matthew Karl Wyant, James Shaw Glanville

Mechanical Engineering

In response to the demands of the 2025 C-UASC (California Unmanned Aerial Systems Competition), our team developed an autonomous drone payload delivery system capable of two distinct delivery modes: a precision-controlled descent and a high-speed aerial drop. Designed for modular integration with UAV platforms, the system prioritizes reliability, accuracy, and simplicity under desert environmental conditions. Our solution features a custom winch mechanism with a programmable stepper motor, a passive mechanical hook for tension-based release, and a servo-actuated trapdoor for high-altitude drops. The design was extensively tested for structural integrity, motor torque requirements, drop precision, and electronics reliability—culminating in a robust …

Llnl Raft Flash Pole Redesign, Jack Stangel, Evan Wolfson, Jake Borden, Alexander Meeter

Mechanical Engineering

During research exercises in the ocean, Lawrence Livermore deploys a fleet of rafts outfitted with flash modules affixed to tall poles (in tandem called flash poles) that flash while a photo is taken to act as datums for data collection. The current flash pole design that the LIDSS (Lawrence Livermore Independent Diagnostic Scoring System) team uses is too short to be visible in high seas, not mechanically suited to be made taller, too susceptible to the elements and blunt impact and too difficult to service. We aim to solve these issues.

Torsional Vibration Kit Simulator (Tks), Joseph Thachet, Luca Lawson, Ryan Ota, Otis Mcloughlin

Mechanical Engineering

The goal of this project was to create torsional vibration on a shaft while limiting axial and radial vibration. To do this an eddy current brake was used to slow down a rotating shaft. The electromagnets used to create the eddy currents are able to be turned on and off at a frequency produced by a function generator. This power cycling of the electromagnets creates an alternating braking force thereby inducing torsional vibration while limiting the other two vibration types

Uv Vessel Hoist Scope Of Work, Quinn J. Horak, Harvey Perkins, Andrew A. Osborn, Mikayla H. Nieman

Mechanical Engineering

The San Luis Obispo Wastewater Treatment Plant uses ultraviolet (UV) tubes to purify water. These tubes are cleaned by an internal wiping mechanism that must be removed for servicing and replacing damaged tubes. Currently, this is accomplished by using an engine hoist, but this method requires a large amount of effort and is not safe. Technicians have requested a new method of lifting wiper mechanisms that is safer, faster, and easier to use than their current method.

To solve this problem, we have developed a design that consists of a custom gantry crane with a hoist on a trolley. The …

Trailer Transport System For Multi-Ton Bins, Joanna Lizbeth Bendy, Kevin Matthew Creel, Annelise Vaara Cuneo, Hugo Alonso Valdez

Mechanical Engineering

This project aimed to improve the process of transporting 10,000-pound industrial waste bins. The current method for relocating these bins poses safety risks and requires significant manual effort. This project presents a conceptual solution that enables a single operator to efficiently and safely move roll-off bins using a custom-designed trailer system. The design incorporates three main subsystems: a trailer frame, an integrated winch system, and an off-the-market puller device to guide and secure the bin during transport. Two scaled proof-of-concept prototypes were fabricated to evaluate key aspects of the system's functionality. Testing and analysis suggested that the system is viable …

Brush Seal Cycling Test Rig, Angelo J. Reis, Neil M. Bedagkar, Max A. Soury, Eoin K. Lenham

Mechanical Engineering

To prevent backflow from the high pressure compressor stages of their gas turbines to lower pressure regions, Solar Turbines utilizes brush seals along their driveshafts. Due to manufacturing limitations, no shaft is perfectly symmetric about its rotating axis, leading to orbiting that creates asymmetric friction on the shaft through rubbing. With this biased application of friction comes a hotspot on one side of the shaft, causing bowing of the shaft and cascading into an amplified vibrational response. Our goal is to gather data on this phenomenon and offer a potential solution.

Heart Valve Leaflet Cutting Automation, Gabriella Aclan, Josh Deweese, Lizzie Dilao, Jason Wong

Mechanical Engineering

The content contained in this report is confidential and proprietary information of Edwards Lifesciences.

Poly Mars Mini-Rover, Dane Carroll, Aaron Lubinsky, Henry Bouma, Gerardo Tapia-Onate, Scott Frizzel

Mechanical Engineering

The Cal Poly Mars Rover project is creating a fleet of near-identical rovers operating collaboratively to research the surface of Mars. Over the last six years, teams at Cal Poly have been developing vehicles to be launched upon the commercialization of interplanetary travel. Two of these vehicles are to take the roles of ‘Scout’ and ‘Relay’ with the most significant difference being their respective ‘arms.’ The ‘Scout’ will have a robotic arm that interacts with objects on the surface while the ‘Relay’ will have a fixed arm, equipped with a StarLink antenna to communicate with orbiting satellites as seen in …

Air To Water Capture In Support Of Un Sustainable Development Goals, Jordan Macconnell, Michael Tiscareño, Ari Dennis, Baxter Mercy

Mechanical Engineering

This senior project explored the use of thermoelectric cooling for atmospheric water capture. The system was designed to cool aluminum condensing surfaces below the dew point using Peltier modules, with forced convection heat sinks on the hot side. The purpose of this system was to gather reliable amounts of water for various water-scarce areas around the world to help meet the UN's sixth Sustainable Development Goal.

The final design of this project consisted of a 1.5 x 1.5 x 2 foot frame made of acrylic panels and insulation. Within the frame, the thermoelectric system was constructed using Peltier modules with …

One-Handed Wheelchair, Brian Azevedo, Cade Veljovich, Carlos Perez, Jakob Zuckermandel, Alexander Harper

Mechanical Engineering

A person who uses a wheelchair for mobility needs a way to operate it with only one hand. This may be necessary if they lack functionality in one hand or prefer to use only one hand while operating the wheelchair. Even for users with two available hands, it is difficult to operate As of now, such wheelchairs are not widely available or easily accessible, yet these devices are crucial for improving the quality of life and mobility of many people. The goal of this project is to design a more viable and ergonomic solution for people who operate a wheelchair …

Micro Mobile Home R3, Roha Y. Ali, Yuka M. Iwashita, Luke C. Douglas, Joshua Q. Le

Mechanical Engineering

Homelessness is an ever-growing issue all around the world. In 2023, over 250,000 or ~40% of all people experiencing homelessness did not have access to shelter spaces in the U.S. [1]. All people have the right to a place where they are safe from violence, crime, and the constant fear that they will be forced out.

Both homeless people and outdoor enthusiasts need a new way to keep themselves and their belongings safe when living outdoors, since existing products do not offer adequate security, portability, or versatility.

2024-2025 Cal Poly Fluid Power Vehicle Competition Team, Jaskaran Singh Hothi, Justin Menzie Lesko, Tristan Kai Crawford, Lucas Rupert Erickson, Diego Velazquez

Mechanical Engineering

The Fluid Power Vehicle Challenge (FPVC) provides an avenue for the exploration of fluid-powered transportation, adhering to regulations set by the National Fluid Power Association (NFPA). This document serves as a roadmap for our team’s research, design, and manufacturing of a vehicle for participation in the FPVC. The team’s journey began with extensive background research, encompassing stakeholder engagement, analysis of existing solutions, and education on fluid power fundamentals. From this information, we decided to focus on enhancing mechatronics systems, improving the transmission, optimizing the mounting, adding a pneumatic element, and improving the efficiency of the hydraulic system of the vehicle …

Large Backflow Check Valve Life Cycle Test Stand, Colin Bentley, Christopher Carloni, Ethan Gray, Luke Romanini

Mechanical Engineering

Backflow preventers are plumbing devices containing internal check valves used to prevent cross-contamination between downstream contaminants and potable water supply. Zurn Wilkins needs a life cycle test stand to mechanically force open check valves submerged in contaminated water and verify check performance. The stand needs to be modular to work with a range of check types and sizes.

Zurn Wilkins is the primary stakeholder for this project. Secondary stakeholders include commercial and residential building owners, contractors, and water utility companies, who rely on their products for safe and efficient water management. The team for this project consists of four Cal …

Hi-Trac Camera Jig, Gabriel Frank Junge, Josh Sherreitt, Jake Weiser, Luke Silver

Mechanical Engineering

Uranium fuel assemblies are stored upright in an underwater container inside the spent nuclear energy fuel pool at Diablo Canyon. The engineers and in-service-inspection team all work together to safely locate this container inside the pool on pins so it is guaranteed safe before they begin loading it with spent uranium fuel rods. The Operators currently employ the use of a zip-tied camera jig that is lowered into the pool along with the tank (called a HI-TRAC) to ensure it is oriented correctly in the pool. This camera jig is in desperate need of re-vamping and re-designing to optimize efficiency …

Expeditionary Ocean Power Generator, Otto Jacob Van Willigen, David Scott Nyberg, Logan Christopher Schilling, Kyle James Hohman, Travis Michael Eccher

Mechanical Engineering

The Expeditionary Ocean Power Generator (ExOPG) project is a point absorber wave energy converter developed by a team of five mechanical engineering seniors at California Polytechnic State University in partnership with NAVFAC EXWC. Designed to support U.S. Marine Corps operations, the device aims to reduce the reliance on diesel generators by generating and storing up to 100 watts of power from ocean waves in a sturdy and self-sufficient device.

The ExOPG device uses a rack and pinion mechanism driven by vertical wave motion to convert mechanical energy into electrical energy via a generator, which is then processed and stored by …

Design Principles For Robotic-Controlled 3d Printing Of Soft Tissue-Mimicking Materials, Karina Mealey

Master's Theses

Geometrically and physically accurate 3D models are emerging as essential tools for surgeons in pre-operative planning and training, but current methods of producing these models are not sufficient. Existing solutions have downsides such as high costs, long and tedious production times, high complexity resulting in a lack of scalability, or an inability to meet material requirements for accurately simulating human tissue.

The objective of this work is to develop principles for a low-cost, easy-to-use 3D printing system capable of prototyping with soft tissue-mimicking materials. To pursue this goal, a MyCobot280 robot arm was used as the mechanism to explore the …

Characterization Of Indoor Air Quality And Thermal Comfort Of University Classrooms, Andrew Sugamele

Master's Theses

Indoor air quality (IAQ) significantly affects cognitive performance, yet many older buildings at Cal Poly, such as Building 20, struggle to maintain healthy indoor environments due to outdated ventilation systems. This thesis aims to identify issues and provide suggestions on how we can improve the learning environment to improve student success within Building 20. Temperature, relative humidity, and carbon dioxide (CO₂) concentration inside Building 20 were measured from January to April 2025. To determine the effects of different ventilation strategies, a model of Building 20, room 128, was developed and validated using DesignBuilder. Additionally, ventilation rates were measured …

From Strategy To Setback?: How A New Teaching Method Affected Exam Outcomes In An Engineering Course, Eleazar Marquez, Samuel Garcia Jr.

Mechanical Engineering Faculty Publications

Research indicates that student learning, engagement, and success in engineering education is highly attributed to the classroom environment and incorporating visual supplements to enhance the physical understanding of fundamental concepts. Despite the implementation and success of numerous pedagogical strategies in these domains, many universities across the country continue to struggle with retention rates, both at the institutional level and the college of engineering. To address such academic challenges and promote student success in engineering education, the authors in this study attempted an alternative pedagogical scheme in a Rigid Body Dynamics course taught at a Hispanic-serving institution (HIS) in the 2023 …

Floating Wind Turbine Foundation, Clayton Lahodny, Dillon Nelson, Trevor Ortega, Andrew Cervantes

Mechanical Engineering

The 2024 Collegiate Wind Competition (CWC) has introduced a new element to their Turbine Design Competition: a floating foundation. In previous years, foundations have been fixed-bottom in a box of sand and water. The Cal Poly Wind Power Club, who competes in the CWC every year, requires a floating foundation to be designed, manufactured, and tested to assist in winning the competition. The foundation is a large, hollow, cylindrical barge with a hanging spar (heavy mass). The barge will provide a restoring moment using buoyancy, and the heavy spar provides additional restoring moment. Four cables will be attached at the …

Hydropower Collegiate Competition, Aiden D. Foster, Devon Bountry, Joanna Vo, Timothy Rinker, Amanda Rodriguez, Minh Nguyen, Eli Haushalter, Sophie Watkinson, Maiya Holton, Breanne Evans

Mechanical Engineering

The Cal Poly SLO HCC team presents a feasibility study and engineering design review package for retrofitting the non-powered Ritschard Dam in Colorado into a hydroelectric facility as part of the 2025 Hydropower Collegiate Competition. Through a rigorous and multi-staged assessment of plausible dam sites in the western US, the team has chosen the Ritschard Dam in Colorado to implement an electromechanical component designed to accommodate a large range of flowrates stemming from a large variance in upper reservoir capacity due to geographical and climate effects. The team evaluated non-powered dams based on technical feasibility, electric grid proximity, power generation …

Automation Of Post Fermentation Must Removal, Grace Hurley, Jakob Spink, Ariel Metscher

Industrial and Manufacturing Engineering

The Harvest Haulers project addresses a critical operational inefficiency at Saucelito Canyon Winery, where post-fermentation must removal from wine barrels was labor-intensive and potentially hazardous. This project aimed to develop a custom forklift attachment that could securely handle Bordeaux and Burgundy barrels, streamline the dumping process, and improve worker safety.

The resulting solution is a forklift-compatible fixture designed to lift, secure, and tilt barrels using a robust combination of a modified aluminum pallet, padded hoop, ratchet straps, and a custom hinge mechanism. The design meets all engineering requirements, including a 600 lb. load capacity, 135° tilt, and a single-operator setup …

Multimodal Self-Folding Of Shape Memory Polymer Using Laser Induced Graphene, Liam Harrison Drew

Master's Theses

Shape memory polymers (SMPs) can undergo programmed shape transformations when heated above their glass transition temperature (T_g), enabling actuation through stimuli such as infrared (IR) radiation and Joule heating. These materials are promising for deployable systems and soft robotics due to their lightweight structure and elimination of traditional mechanical components. While IR-based actuation is simple and low-cost, it lacks precision in uncontrolled environments. Joule heating offers improved control but is often limited by conductive ink properties such as thickness, stiffness, or poor adhesion. This work introduces a novel method for multimodal SMP actuation using laser-induced graphene (LIG) transferred …

Fused-Silica Microelectromechanical Systems For Relative Gravimetry, Ethan Doerstling

Theses and Dissertations

Gravimeters are devices that measure gravitational acceleration which can be used by the United States Air Force (USAF) in the areas of navigation and remote sensing. Fused-silica microelectromechanical systems (MEMS) devices offer capabilities to make inexpensive relative gravimeters with higher thermal stability than common silicon devices while maintaining good gravitational sensitivity. The fused-silica devices in this research were designed, simulated, fabricated, and tested to observe their performance as gravimeters. The devices exhibit properties of highly sensitive accelerometers but the current designs do not qualify as gravimeters. This study provides information to improve the sensitivity and stability of these fused-silica MEMS …

Effect Of Manufacturing And Machining Process On Recycled Composite Connecting Rods Under Tension And Compression, Walter W. Oppelt

Master's Theses

Carbon fiber reinforced polymer (CFRP) is an engineering material renowned for its high-strength and low-density material properties. Such properties make CFRPs especially useful for applications across many industries, including aerospace, automotive, marine, sporting goods, oil and gas, and more. However, with such favorable material properties comes the cost of high energy usage required to produce raw carbon fiber. Recycled carbon fiber (rCF) has emerged as a promising alternative, offering a significant reduction in energy usage. This research explores the viability of applying recycled CFRPs to internal combustion engines to both reduce energy costs during manufacturing and while in use. Mechanical …

Cryogenic Fuel Delivery System, Carter Josef, Reilly Humphreys, Joseph O'Connor, Nick Spreen

Mechanical Engineering

This project presents the design and validation of a cryogenic fuel delivery system aimed at enabling sustainable aviation through hydrogen fuel vaporization. Developed by a team of senior mechanical engineering students at Cal Poly and sponsored by Boeing, the system utilizes atmospheric air to vaporize liquid nitrogen, used as a stand-in for hydrogen, via forced convection heat exchangers, eliminating the need for engine-supplied heat and reducing parasitic loads. A feedback loop and turbine component are integrated to regulate pressure and recover energy, respectively. A benchtop prototype was built and tested to evaluate system performance, with results closely aligning with analytical …