Mechanical Engineering Commons^™

Assessing User Expectations Of Undo In A Multi-User Cad Environment, Jeffrey Eric Nuss

Theses and Dissertations

Undo is a command that users rely on in most software applications. Its importance in multi-user CAD is no different. However, due to its unique nature, users may have different expectations regarding how undo should behave. This research seeks to better understand users' expectations regarding undo in multi-user CAD by having users participate in collaborative design exercises and then asking them how they would expect undo to behave. In addition, users participated in a survey in which they watched 8 videos showing users interacting within multi-user CAD and were then asked about how they would want undo to behave. Based …

Droplet Impingement On Superhydrophobic Surfaces, Cristian Esteban Clavijo Angeles

Theses and Dissertations

This dissertation explores the physics of droplet impingement on superhydrophobic surfaces. The research is divided in three categories. First, the effect of a slip boundary condition on droplet spreading/retracting is considered. A model is developed based on energy conservation to evaluate spreading rates on surfaces exhibiting isotropic and anisotropic slip. The results show that larger slip causes the droplet to spread out farther owing to reduced friction at the interface for both slip scenarios. Furthermore, effects of slip become magnified for large Weber numbers due to the larger solid-liquid contact area during the process. On surfaces with anisotropic slip, droplets …

Numerical Analysis For The Hemodynamics In Unruptured Cerebral Aneurysms, Hashem Mhd Hicham Alargha

Theses

A cerebral aneurysm is a vascular disorder characterized by abnormal focal dilation of a brain artery which is considered as a serious and potentially life-threatening condition. Cerebral aneurysms affect around 2%-5% of adults and they are fatal and can rupture with an overall mortality rate of more than 50%. Through computational fluid dynamics investigation, this study is offering a closer look into the initiation growth and rupture of cerebral aneurysms. Four focus points are studied in this thesis which are sensitivity analysis of blood viscosity in aneurysms, the effect of cerebral aneurysm size on wall stresses and strain, hazard effects …

Application Of A Multi-Zone Model For The Prediction Of Species Concentrations In Rapid Compression Machine Experiments, David Wilson

Master's Theses (2009 -)

Accurate chemical kinetic models, which predict species evolution and heat release rates in chemically reactive systems, are essential for further advancements in fuel and combustion technology. An experimental facility that is widely used for evaluating the accuracy of kinetic models is a rapid compression machine (RCM), which creates a well-defined reaction environment by compressing a reactive mixture inside a chamber. Generally, RCM experiments are conducted in order to obtain ignition delay data. However, chemical speciation data provides greater insight into reaction pathways, and is therefore a more rigorous benchmark for validating kinetic models. In order for a chemical kinetic model …

Modeling And Investigation Of Refrigeration System Performance With Two-Phase Fluid Injection In A Scroll Compressor, Rui Gu

Master's Theses (2009 -)

Vapor compression cycles are widely used in heating, refrigerating and air-conditioning. A slight performance improvement in the components of a vapor compression cycle, such as the compressor, can play a significant role in saving energy use. However, the complexity and cost of these improvements can block their application in the market. Modifying the conventional cycle configuration can offer a less complex and less costly alternative approach. Economizing is a common modification for improving the performance of the refrigeration cycle, resulting in decreasing the work required to compress the gas per unit mass. Traditionally, economizing requires multi-stage compressors, the cost of …

Thin Film Studies Toward Improving The Performance Of Accelerator Electron Sources, Md Abdullah Al Mamun

Mechanical & Aerospace Engineering Theses & Dissertations

Future electron accelerators require DC high voltage photoguns to operate beyond the present state of the art to conduct new experiments that require ultra-bright electron beams with high average current and higher bunch charge. To meet these demands, the accelerators must demonstrate improvements in a number of photogun areas including vacuum, field emission elimination in high voltage electrodes, and photocathodes. This dissertation illustrates how these improvements can be achieved by the application of suitable thin-films to the photogun structure for producing ultra-bright electron beams.

This work is composed of three complementary studies. First, the outgassing rates of three nominally identical …

Experimental Investigation Of Turbulent Structures And Non-Equilibrium Effects In Axial Wake Vortices Via Particle Image Velocimetry, Jeffry William Ely

Mechanical & Aerospace Engineering Theses & Dissertations

Vortices are a common phenomenon in fluid flows that arise as kinetic energy dissipates into heat via viscous interaction. They arise naturally at large scales in the form of dust devils, tornadoes, and as a counter-rotating vortex pair in the wake of aircraft. It is important to understand the conditions leading to their formation, their duration, and their dissipation in order to forecast or prevent undesirable effects. Among these deleterious effects is a decrease in safety of aircraft operations in the wake of other aircraft, an extremely common situation at airports around the world. A large number of mathematical models …

Concurrent Spatial Mapping Of The Viscoelastic Behavior Of Heterogeneous Soft Materials Via A Polymer-Based Microfluidic Device, Wenting Gu

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation presents a novel experimental technique, namely concurrent spatial mapping (CSM), for measuring the viscoelastic behavior of heterogeneous soft materials via a polymer-based microfluidic device. Comprised of a compliant polymer microstructure and an array of electrolyte-enabled distributed resistive transducers, the microfluidic device detects both static and dynamic distributed loads. Distributed loads deform the polymer microstructure and are recorded as resistance changes at the locations of the transducers.

The CSM technique identifies the elastic modulus of soft materials by applying a precisely controlled indentation depth using a rigid probe to a sample placed on the device. The spatially-varying elastic modulus …

Secondary Electron Emission From Plasma Processed Accelerating Cavity Grade Niobium, Miloš Bašović

Mechanical & Aerospace Engineering Theses & Dissertations

Advances in the particle accelerator technology have enabled numerous fundamental discoveries in 20th century physics. Extensive interdisciplinary research has always supported further development of accelerator technology in efforts of reaching each new energy frontier.

Accelerating cavities, which are used to transfer energy to accelerated charged particles, have been one of the main focuses of research and development in the particle accelerator field. Over the last fifty years, in the race to break energy barriers, there has been constant improvement of the maximum stable accelerating field achieved in accelerating cavities. Every increase in the maximum attainable accelerating fields allowed for higher …

A Comparison Of American, Norwegian, And Russian Standards In Calculating The Wall Thickness Of Submarine Gas Pipeline, Cindy Dianita, Tatyana Vladimirovna Dmitrieva

Makara Journal of Technology

One of the key issues in the pipeline design is wall thickness calculation. This paper highlights a comparison of wall thickness calculation methods of submarine gas pipeline based on Norwegian Standard (DNV-OS-F101), Indonesian Standard SNI 3474 which refers to American Standard (ASME B31.8), and Russian Standard (VN39-1.9-005-98). A calculation of wall thickness for a submarine gas pipeline in Indonesia (pressure 12 MPa, external diameter 668 mm) gives the results of 18.2 mm (VN39-1.9-005-98), 16 mm (ASME B31.8), and 13.5 mm (DNV-OS-F101).The design formula of hoop stress due to internal pressure is interpreted in different ways for every standard. Only Norwegian …

Design And Testing Of Robotic Capsule Biosensors In The Small Intestine, Zachary Bram

Robotics and Mechanical Systems Design

Biosensors are a tool that is growing in usage and is sought out by doctors and patients alike for being a non-invasive method to monitor health. The data that can be collected from these sensors can be analyzed by doctors that are away from patients, or even by patients that do not have the ability to see a doctor. The purpose of this work is to design and test a biosensor capsule that can attach itself to the inner wall of the small intestine for a short period of time before exiting the body. This research project was a continuation …

Improving Damage Tolerance Of Composite Sandwich Structures Subjected To Low Velocity Impact Loading: Experimental And Numerical Analysis, Ravi B. Gondaliya

Doctoral Dissertations and Master's Theses

Sandwich structures with composite facing skins have seen applications in variety of sectors including aerospace and automobile, owing to their high specific mechanical properties. However, there is a need to develop better damage tolerant sandwich structures since conventional composite facing skins exhibit low impact resistance in the transverse direction. Here, composite skin sandwich structures with three different impact resistant core materials were fabricated and tested both experimentally and numerically. Neat CFRP and 2024-T3 aluminum alloy sheets were also investigated. Cores utilizing impact resistant D3O® were found to have very favorable weight specific energy absorbing properties at higher impact velocities as …

Oscillatory Flow Mechanism For Enhanced Heat Transfer, Sultan Taher Raml

Doctoral Dissertations and Master's Theses

This research project is about the use of an oscillatory flow mechanism to enhance heat transfer. The idea behind this is to induce oscillation of the end wall of one of two connected chambers of a heat exchanger which effectively will induce oscillation of the boundary layer within the connecting duct. The main idea of this thesis came from using species separation studies before 40 years ago in hyperventilation technology to help patients under anesthesia in hospitals. There are many applications for this research such as removing heat from chemical reactors, electrical devices and other enclosed environments such as submarines, …

Optical Nonlocality Induced Zitterbewegung Near The Dirac Point In Metal-Dielectric Multilayer Metamaterials, L. Sun, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Notes On Contributions To The Science Of Rare Earth Element Enrichment In Coal And Coal Combustion Byproducts, James C. Hower, Evan J. Granite, David B. Mayfield, Ari S. Lewis, Robert B. Finkelman

Center for Applied Energy Research Faculty and Staff Publications

Coal and coal combustion byproducts can have significant concentrations of lanthanides (rare earth elements). Rare earths are vital in the production of modern electronics and optics, among other uses. Enrichment in coals may have been a function of a number of processes, with contributions from volcanic ash falls being among the most significant mechanisms. In this paper, we discuss some of the important coal-based deposits in China and the US and critique classification systems used to evaluate the relative value of the rare earth concentrations and the distribution of the elements within the coals and coal combustion byproducts.

Interactive Spatiotemporal Analysis Of Oil Spills Using Comap In North Dakota, Yong Shin Park, Hamad Al-Qublan, Eunsu Lee, Gokhan Egilmez

Mechanical and Industrial Engineering Faculty Publications

The aim of the study is to analyze the oil spill pattern from various types of incidents and contaminants to determine the extent that incident data can be used as a baseline to prevent hazardous material releases and improve response activities at a state level. This study addresses the importance of collecting and sharing oil spill incidents as well as analytics using the data. Temporal, spatial and spatiotemporal analysis techniques are employed for the oil-spill related environmental incidents observed in the state of North Dakota, United States of America, from 2000 to 2014, as a result of the oil boom. …

Optimization And Characterization Of Integrated Microfluidic Surface Acoustic Wave Sensors And Transducers, Tao Wang

USF Tampa Graduate Theses and Dissertations

Surface acoustic waves (SAWs) have a large number of applications and the majority of them are in the sensor and actuator fields targeted to satisfy market needs. Recently, researchers have focused on optimizing and improving device functions, sensitivity, power consumption, etc. However, SAW actuators and sensors still cannot replace their conventional counterparts in some mechanical and biomedical areas, such as actuators for liquid pumping under microfluidic channels and sensors for real-time cell culture monitoring. The two objectives of this dissertation are to explore the potential of piezoelectric materials and surface acoustic waves for research on actuators and sensors in the …

Hydrogen Effects On X80 Steel Mechanical Properties Measured By Tensile And Impact Testing, Xuan Li

USF Tampa Graduate Theses and Dissertations

The effect of hydrogen charging current density and tensile strain rate on the mechanical properties of X80 pipeline steel were investigated by slow strain rate test (SSRT), Charpy impact test, and scanning electron microscopy (SEM) in this thesis. The results show that both the ultimate tensile strength and elongation to failure of X80 steel were deteriorated significantly after charging with hydrogen. With a strain rate of 5 x 10^-5 s^-1, the relative tensile strength and plasticity loss of X80 steel had no significant change within the range of assumed hydrogen partial pressures at room temperature. At room …

Automated, Autonomous And Connected Vehicle Technology Assessment, Florida Solar Energy Center, David L. Block

FSEC Energy Research Center®

The U.S. Department of Transportation (USDOT) and almost every state DOT are showing extreme interest in the application of automated and connected vehicles (ACV). This combined application can significantly reduce crashes, energy consumption, pollution and the costs of congestion which in turn will offer a fundamental change to the U.S. transportation network and system. The objective of this technology assessment project is to evaluate the vehicle technologies, actions, laws and policies that are now in place and to assess their future usage. The assessment also evaluates the highest level of automated vehicles called autonomous or self-driving vehicles. In fact, autonomous …

Modified Yttrium Hydroxide/Mc Nylon Nanocomposites And Scaling Effects In Multilayer Polyethylene Films, Jia Chen

USF Tampa Graduate Theses and Dissertations

In this thesis, monomer casting (MC) nylon was synthesized. MC nylon could replace nonferrous metals in certain applications, including gears, wheels, and other moving parts. However, compared with metals, MC nylon products have poor strength and stiffness, and crack easily, especially at low temperatures. In addition, the dimensional stability of MC nylon is poor, especially in the large casting nylon products, causing significant internal stresses due to shrinkage. Thus, MC nylon cracks easily when cast and molded. The yttrium hydroxide particles were modified by stearic acid and dispersed in the caprolactam. The polymerization time was short due to fast anionic …

Development Of Design A Drop-In Hydrogen Fueling Station To Support The Early Market Buildout Of Hydrogen Infrastructure, Abdulhakim Amer A. Agll, Tarek A. Hamad, Yousif M. Hamad, Sushrut G. Bapat, John W. Sheffield

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper provides a design of a drop-in hydrogen fueling station. Drop-in stations are expected to be an important factor in the introduction of hydrogen fueling infrastructure. The stations not only allow a streamlined introduction of hydrogen in the vehicle fueling infrastructure, but also, acts as mini pilot plants that can allow for detailed control studies. The effect of the location and availability of utilities, the closeness to residential area, unintended safety concerns, people outlook towards hydrogen, etc. are some of the factors that can be readily studied with such drop-in stations. The proposed design of a drop-in station mainly …

Development Of Distributed Off-Grid Renewable Energy System For Rural African Communities, Mateo Sebastian Guerrero, Menghong Feng

Engagement & Service-Learning Summit

Our Hybrid Energy System team is committed to develop low-cost renewable energy solutions to rural African communities where access to electricity from government grid is not available. According to a World Bank’s report, only 24% of sub-Saharan countries have access to electricity. Our team has been working with local partners to build renewable energy systems since 2008. From 2015 the team has been working on micro hydropower turbine and vertical-axis wind turbine with solar energy system combined. Our current efforts include a prototype design of a wind-solar system, using a new concept of vertical axis wind turbine to harvest wind …

Epics Torch, Madi Rogers, George Townsend, Brandon Henman, Holly Gregory, Patrick Leal, Brennan Mcpherron, Xinyue Pan

Engagement & Service-Learning Summit

The Indiana Bicentennial Commission (IBC) was created by former governor Mitch Daniels to plan and execute a statewide celebration of Indiana’s 200th birthday in 2016. The commission has requested that researchers at Purdue University develop a high-tech Indiana-made flame torch a la the Olympic torch to be used in the celebration and displayed throughout all 92 counties of the state. In addition, the IBC requested that Purdue’s EPICS program develop a kid-friendly torch that can be used alongside the actual torch in relays, celebrations, and community outreach events throughout the state.

By collaborating with Purdue researchers throughout a range of …

4-H Nfpa Fluid Power Challenge, Erika D. Bonnett

Engagement & Service-Learning Summit

The 4-H NFPA Fluid Power Challenge partnered Purdue Polytechnic Institute and Indiana 4-H with the National Fluid Power Association and Center for Compact and Efficient Fluid Power to provide teams of Indiana youth in 6-8th grades with opportunity to learn about hydraulics, engineering design, and other STEM skills. This created an opportunity to give youth a learning experience with STEM through hands-on, experiential learning activities. Youth experienced a one day workshop in which they worked as teams to learn concepts of fluid power through hands-on learning. Teams then went back to their communities and created and designed a fluid power …

Effect Of Plug In Hybrid Electric Vehicle Adoption On Gas Tax Revenue, Local Pollution, And Greenhouse Gas Emissions, Neil Mccall

Theses and Dissertations

Plug-in hybrid electric vehicles (PHEV) are likely to increase in popularity in the near future. However, the environmental benefits of PHEVs involve tradeoffs between the benefits of reduced tailpipe emissions against the drawbacks of increased emissions at marginal electric generation plants and reduced gasoline tax income. In this report, a model is developed that will enable these tradeoffs to be studied. The model accounts for local commuting patterns and marginal electric generation in New Jersey. The result allows the effect of PHEV adoption on gasoline tax, CO2, NOx and SOx to be predicted on a county level. Sample calculations are …

Towards Developing Product Applications Of Thick Origami Using The Offset Panel Technique, Michael R. Morgan, Robert J. Lang, Spencer P. Magleby, Larry L. Howell

Faculty Publications

Several methods have been developed to accommodate for the use of thick materials in origami models which preserve either the model’s full range of motion or its kinematics. The offset panel technique (OPT) preserves both the range of motion and the kinematics while allowing for a great deal of flexibility in design. This work explores new possibilities for origami-based product applications presented by the OPT. Examples are included to illustrate fundamental capabilities that can be realized with thick materials such as accommodation of various materials in a design and manipulation of panel geometry resulting in an increased stiffness and strength. …

Mentored Environment For Isogeometric Analysis, Kevin Tew, Michael Scott

Journal of Undergraduate Research

The mentored environment for isogeometric analysis (IGA) has trained engineering and computer science students to develop isogeometric numerical methods and accompanying software to solve challenging problems in science and engineering. The mentoring environment consisted of:

1. Weekly group meetings where research concepts were discussed, scientific literature was reviewed, and progress was monitored.
2. Pairing of students with a faculty members to develop IGA design-through-analysis methodologies.
3. Preparation of results for peer-reviewed publications.

Skycsr: Optimal Communication Methods For Coordinating Ground Support In A Private And General Aviation Setting, Jessica Burke

Industrial and Manufacturing Engineering

Delays due to miscommunication of between the pilot and ground service providers are increasing. The objective of this project is to develop a new method of communication between pilots, line service technicians and customer service agents. This will be achieved first through an investigation into current methods and state of the industry, followed by a survey conducted with a group of pilots and flight schools. This culminates in a web application that will take the deficiencies identified in the survey, to make sure ground service or fuel orders are explicitly clear and minimize the probability of a mis-fueling, overlooked fueling, …

Carbon Emission Awareness And Information Platform, Jose Ignacio Cordero, Paul Romero

Industrial and Manufacturing Engineering

Climate change due to global warming has become a worldwide concern.

Nowadays, people are starting to wake up and realize that changes need to be

made in their lifestyles in order to preserve this earth and provide a better planet

for future generations. Finding a concrete solution to global warming and climate

change has proven to be a very challenging task. Governments have tried

implementing solutions and as a result, corporations have been forced to absorb

or transfer the cost of unsuccessful environmental regulations. Meanwhile,

individuals remain frustrated, wishing they could find a way to help.

The motivation behind this …

Multi-Level Route-Optimization Computer Application, Ryan Sutardji, Frank Nguyen

Industrial and Manufacturing Engineering

This report provides a detailed analysis on how to optimize driving routes by creating a computer application. There are many different route-optimization issues that logistical companies consistently face, as well as many different solutions and algorithms. With technology on the rise, pick-up, delivery, and transportation services are become a huge part of our everyday lives. When optimizing routes, reducing transportation costs by minimizing travel distance is always ideal, but other factors must be considered such as arriving at a location before or after a certain time. Our objective is to optimize driving routes based on travel distance and priorities. We …