Mechanical Engineering Commons^™

A Study On Flow Development In An Apu-Style Inlet And Its Effect On Centrifugal Compressor Performance, Fangyuan Lou

Open Access Dissertations

The objectives of this research were to investigate the flow development inside an APU-style inlet and its effect on centrifugal compressor performance. The motivation arises from the increased applications of gas turbine engines installed with APU-style inlets such as unmanned aerial vehicles, auxiliary power units, and helicopters. The inlet swirl distortion created from these complicated inlet systems has become a major performance and operability concern. To improve the integration between the APU-style inlet and gas turbine engines, better understanding of the flow field in the APU-style inlet and its effect on gas turbine is necessary.

A research facility for the …

Multi-Axis Machining Project Development, Ryan Patrick Blodgett, Andre Peter Rivera

Industrial and Manufacturing Engineering

Multi-axis milling is a manufacturing material removal process in which computer numerically controlled (CNC) tools cut away excess material through movement in four or more axes. Compared to traditional three-axis machining, multi-axis machining greatly increases the capability and accuracy of the CNC machining processes by reducing the amount of operations required to completely machine a part. Currently, the Industrial and Manufacturing Engineering Department at Cal Poly lacks an advanced CNC class that incorporates fourth and fifth axis CNC machining in the curriculum. This report describes the process behind creating a project for such a class. The class will demonstrate the …

Carbon-Based Hierarchical Scaffolds For Myoblast Differentiation: Synergy Between Nano-Functionalization And Alignment, Akhil Patel, Shilpaa Mukundan, Wenhu Wang, Anil K. Karumuri, Vinayak Sant, Sharmila M. Mukhopadhyay, Shilpa Sant

Mechanical and Materials Engineering Faculty Publications

While several scaffolds have been proposed for skeletal muscle regeneration, multiscale hierarchical scaffolds with the complexity of extracellular matrix (ECM) haven’t been engineered successfully. By precise control over nano- and microscale features, comprehensive understanding of the effect of multiple factors on skeletal muscle regeneration can be derived. In this study, we engineered carbon-based scaffolds with hierarchical nano- and microscale architecture with controlled physico-chemical properties. More specifically, we built multiscale hierarchy by growing carbon nanotube (CNT) carpets on two types of scaffolds, namely, interconnected microporous carbon foams and aligned carbon fiber mats. Nanostructured CNT carpets offered fine control over nano-roughness and …

Angle Of Repose, Said Shakerin

All Faculty Articles - School of Engineering and Computer Science

No abstract provided.

Associative Cad References In The Neutral Parametric Canonical Form, Daniel Robert Staves

Theses and Dissertations

Due to the multiplicity of computer-aided engineering applications present in industry today, interoperability between programs has become increasingly important. A survey conducted among top engineering companies found that 82% of respondents reported using 3 or more CAD formats during the design process. A 1999 study by the National Institute for Standards and Technology (NIST) estimated that inadequate interoperability between the OEM and its suppliers cost the US automotive industry over $1 billion per year, with the majority spent fixing data after translations. The Neutral Parametric Canonical Form (NPCF) prototype standard developed by the NSF Center for e-Design, BYU Site offers …

Dynamic Stall Of An Experimental Wind Turbine Blade, Matthew Scott Melius, Raúl Bayoán Cal, Karen Mulleners

Mechanical and Materials Engineering Faculty Publications and Presentations

To understand the complex flow phenomena over wind turbine blades during stall development, a scaled three-dimensional non-rotating blade model is designed to be dynamically similar to a rotating full-scale NREL 5 MW wind turbine blade. A time-resolved particle imagevelocimetry(PIV) investigation of flowbehavior during the stall cycle examines the processes of stall development and flow reattachment. Proper orthogonal decomposition (POD) and vortex detection techniques are applied to the PIV fields to quantify relevant flow characteristics such as vortex size, separation angle, and separation point throughout a dynamic pitching cycle. The behavior of the POD coefficients provides time scales for the transitional …

Analytical Investigation Of Fretting Wear With Special Emphasis On Stress Based Models, Arnab Jyoti Ghosh

Open Access Dissertations

Fretting refers to the minute oscillatory motion between two surfaces in contact under an applied normal load. It can cause either surface or subsurface initiated failure resulting in either fatigue or wear or both. Two distinct regimes – partial slip and gross slip are typically observed in fretting contacts. Due to the nature of contact, various factors such as wear debris, oxidation, surface roughness, humidity etc. effect failures caused due to fretting. A number of different techniques have been developed to quantify fretting damage and several numerical models are proposed to predict damage due to fretting. Fretting wear also depends …

Dynamic Control Of Radiative Surface Properties With Origami-Inspired Design, Rydge B. Mulford, Matthew R. Jones, Brian D. Iverson

Faculty Publications

Thermal management systems for space equipment commonly use static solutions that do not adapt to environmental changes. Dynamic control of radiative surface properties is one way to respond to environmental changes and to increase the capabilities of spacecraft thermal management systems. This paper documents an investigation of the extent to which origami-inspired surfaces may be used to control the apparent absorptivity of a reflective material. Models relating the apparent absorptivity of a radiation shield to time-dependent surface temperatures are presented. Results show that the apparent absorptivity increases with increasing fold density and indicate that origami-inspired designs may be used to …

Development Of High-Order PN Models For Radiative Heat Transfer In Special Geometries And Boundary Conditions, Wenjun Ge, Michael F. Modest, Somesh Roy

Mechanical Engineering Faculty Research and Publications

The high-order spherical harmonics () method for 2-D Cartesian domains is extracted from the 3-D formulation. The number of equations and intensity coefficients reduces to (N+1)2/4 in the 2-D Cartesian formulation compared with N(N+1)/2 for the general 3-D formulation. The Marshak boundary conditions are extended to solve problems with nonblack and mixed diffuse-specular surfaces. Additional boundary conditions for specified radiative wall flux, for symmetry/specular reflection boundaries have also been developed. The mathematical details of the formulations and their implementation in the OpenFOAM finite volume based CFD software platform are presented. The accuracy and computational cost of the 2-D Cartesian are …

Neutral Parametric Database, Server, Logic Layers, And Clients To Facilitate Multi-Engineersynchronous Heterogeneous Cad, Kelly Eric Bowman

Theses and Dissertations

Engineering companies are sociotechnical systems in which engineers, designers, analysts, etc. use an array of software tools to follow prescribed product-development processes. The purpose of these amalgamated systems is to develop new products as quickly as possible while maintaining quality and meeting customer and market demands. Researchers at Brigham Young University have shortened engineering design cycle times through the development and use of multiengineer synchronous (MES) CAD tools. Other research teams have shortened design cycle-times by extending seamless interoperability across heterogeneous design tools and domains. Seamless multi-engineer synchronous heterogeneous (MESH) CAD environments is the focus of this dissertation. An architecture …

In Vitro Molecular Modification Of Human Cultured And Primary Cells Using Lance Array Nanoinjection, John W. Sessions

Theses and Dissertations

Fundamentally altering cellular function at a genetic level is a major area of interest in the biologic sciences and the medical community. By engineering transfectable constructs that can be inserted to dysfunctional cellular systems, scientists can mitigate aberrant genetic behavior to produce proper molecular function. While viral vectors have been a mainstay in the past, there are many limitations, particularly related to safety, that have changed the focus of genome editing to incorporate alternative methods for gene delivery. Lance Array Nanoinjection (LAN), a second-generation microfabricated transfection biotechnology, is one of these alternative technologies. LAN works by utilizing both simultaneous electrostatic …

An Automated Method For Optimizing Compressor Blade Tuning, Kurt Berlin Hinkle

Theses and Dissertations

Because blades in jet engine compressors are subject to dynamic loads based on the engine's speed, it is essential that the blades are properly "tuned" to avoid resonance at those frequencies to ensure safe operation of the engine. The tuning process can be time consuming for designers because there are many parameters controlling the geometry of the blade and, therefore, its resonance frequencies. Humans cannot easily optimize design spaces consisting of multiple variables, but optimization algorithms can effectively optimize a design space with any number of design variables. Automated blade tuning can reduce design time while increasing the fidelity and …

Maximizing Virtual Mucax Engineering Design Team Performance, Brett Randall Stone

Theses and Dissertations

Teams of design engineers are increasingly working as members of virtual teams, or teams whose members are distributed geographically and communicate mostly through electronic means. In addition, emerging multi-user (MU) applications engage complementary teams in synchronous design activities. These new MU tools are changing the way engineers work together. Together, these factors have created a new and interesting environment in which engineering design teams must function. The work presented here lays out two major themes that teams and their managers can effectively apply to organizing and managing MU teams: 1) teams can maximize their potential productivity by determining the optimal …

Understanding And Addressing Collaboration Challenges For The Effective Use Of Multi-User Cad, David James French

Theses and Dissertations

Multi-user computer-aided design (CAD) is an emerging technology that promises to facilitate collaboration, enhance product quality, and reduce product development lead times by allowing multiple engineers to work on the same design at the same time. The BYU site of the NSF Center for e-Design has developed advanced multi-user CAD prototypes that have demonstrated the feasibility and value of this technology. Despite the possibilities that this software opens up for enhanced collaboration, there are now a new variety of challenges and opportunities to understand and address. For multi-user CAD to be used effectively in a modern engineering environment, it is …

Decomposition Of Manufacturing Processes For Multi-User Tool Path Planning, Andrew Scherbel Priddis

Theses and Dissertations

Engineering activities by nature are collaborative endeavors. Single-user applications like CAD, CAE, and CAM force a strictly serial design process, which ultimately lengthens time to market. New multi-user applications such as NXConnect address the issue during the design stage of the product development process by enabling users to work in parallel. Multi-user collaborative tool path planning software addresses the same serial limitations in tool path planning, thereby decreasing cost and increasing the quality of manufacturing processes. As part complexity increases, lead times are magnified by serial workflows. Multi-user tool path planning can shorten the process planning time. But, to be …

A Techno-Economic Analysis Of Wind Generation In Conjunction With Compressed Air Energy In The Integrated Single Electricity Market., Brendan Cleary

Doctoral

The Integrated Single Electricity Market (I-SEM) is the proposed wholesale electricity market for Ireland and it is intended to replace the current Single Electricity Market (SEM) by 2018. Subsequently, substantial modifications will be required to the SEM and this has led to significant uncertainty for stakeholders. The SEM currently features no forecast risk for renewables such as wind and there is no concept of balance responsibility. Under the I-SEM, wind generation will be exposed to forecast risk and the requirement to be balance responsible. The use of Compressed Air Energy Storage (CAES) could represent a better system configuration which would …

Analytical And Experimental Investigation Of Microstructural Alterations In Bearing Steel In Rolling Contact Fatigue, Sina Mobasher Moghaddam

Open Access Dissertations

Rolling Contact Fatigue (RCF) is one the most common failure modes in bearings. RCF is usually associated with particular microstructural alterations. Such alterations (i.e. white etching cracks, butterflies, etc.) which lead to RCF failure are known to be among the most concerning matters to bearing industry.

In the current work, an analytical as well as experimental approaches are used to investigate “butterfly wing” formation, crack initiation and propagation from inclusions. A new damage evolution equation coupled with a FE model is employed to account for the effect of mean stresses and alternating stresses simultaneously to investigate butterfly formation. The proposed …

Conjugate Heat Transfer And Average Versus Variable Heat Transfer Coefficients, Tyler James Macbeth

Theses and Dissertations

An average heat transfer coefficient, h_bar, is often used to solve heat transfer problems. It should be understood that this is an approximation and may provide inaccurate results, especially when the temperature field is of interest. The proper method to solve heat transfer problems is with a conjugate approach. However, there seems to be a lack of clear explanations of conjugate heat transfer in literature. The objective of this work is to provide a clear explanation of conjugate heat transfer and to determine the discrepancy in the temperature field when the interface boundary condition is approximated using h_bar compared to …

Analysis Of High Fidelity Turbomachinery Cfd Using Proper Orthogonal Decomposition, Ronald Alex Spencer

Theses and Dissertations

Assessing the impact of inlet flow distortion in turbomachinery is desired early in the design cycle. This thesis introduces and validates the use of methods based on the Proper Orthogonal Decomposition (POD) to analyze clean and 1/rev static pressure distortion simulation results at design and near stall operating condition. The value of POD comes in its ability to efficiently extract both quantitative and qualitative information about dominant spatial flow structures as well as information about temporal fluctuations in flow properties. Observation of the modes allowed qualitative identification of shock waves as well as quantification of their location and range of …

2016 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2016.

Development Of A Model And Optimal Control Strategy For The Cal Poly Central Plant And Thermal Energy Storage System, Daniel Douglas Castro

Master's Theses

This thesis develops a calibrated model of the Cal Poly Central Chilled Water Plant with Thermal Energy Storage for use in determining an optimal operating control strategy. The model was developed using a transient systems simulation program (TRNSYS) that includes plant performance and manufacturer data for the primary system components, which are comprised of pumps, chillers, cooling towers, and a thermal energy storage tank. The model is calibrated to the actual measured performance of the plant using the current control strategy as a baseline. By observing and quantifying areas for potential improvement in plant performance under conditions of high campus …

Design And Analysis Of A Lift Assist Walker, Deep P. Shah

Master's Theses

Walkers provided stability to the elderly but cannot assist a person from sitting to standing. The objective of this project is to present the design and analysis of a lift assist walker. This report discusses the design and analysis of a collapsible lift assist walker capable of lifting a patient up to 250 lbs. from seated to standing in under 10 seconds. The designed walker utilized a two stage scissor mechanism with a gas spring assisted embedded linear actuator.

Predicted Stresses In Ball-Grid-Array (Bga) And Column-Grid-Array (Cga) Interconnections In A Mirror-Like Package Design, Ephraim Suhir, Reza Ghaffarian, Johann Nicolics

Mechanical and Materials Engineering Faculty Publications and Presentations

There is an obvious incentive for using bow-free (temperature change insensitive) assemblies in various areas of engineering, including electron device and electronic packaging fields. The induced stresses in a bow-free assembly could be, however, rather high, considerably higher than in an assembly, whose bow is not restricted. The simplest and trivial case of a bow-free assembly is a tri-component body, in which the inner component is sandwiched between two identical outer components (“mirror” structure), is addressed in our analysis, and a simple and physically meaningful analytical stress model is suggested. It is concluded that if acceptable stresses (below yield stress …

An Analysis Of The Effectiveness Of A Multi-Disciplinary Decision Support System On System-Level Decision Making, Troy Mario Seletos

Theses and Dissertations

Decisions Support Systems (DSSs) are used to enhance decision maker speed and effectiveness. However, without a view of an entire system, any decision may have unanticipated effects such as sub-optimal outcomes. The purpose of this research is to show that with a system-level analysis, more informed decisions can be made that take into account a larger system or greater number of dimensions or objectives. This research also explores the benefits of using a DSS over analysis of unprocessed data and the effectiveness of integrating a product design generator (PDG) with a business DSS, creating a system DSS, where system-level effects …

Solvent-Free Manufacturing Of Electrodes For Lithium-Ion Batteries, B. Ludwig, Z. Zheng, W. Shou, Y. Wang, Heng Pan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Semiconductor Film Grown On A Circular Substrate: Predictive Modeling Of Lattice-Misfit Stresses, Ephraim Suhir, Johann Nicolics, G. Khatibi, M. Lederer

Mechanical and Materials Engineering Faculty Publications and Presentations

effective and physically meaningful analytical predictive model is developed for the evaluation the lattice-misfit stresses (LMS) in a semiconductor film grown on a circular substrate (wafer). The two-dimensional (plane-stress) theory-of-elasticity approximation (TEA) is employed in the analysis. The addressed stresses include the interfacial shearing stress, responsible for the occurrence and growth of dislocations, as well as for possible delaminations and the cohesive strength of a buffering material, if any. Normal radial and circumferential (tangential) stresses acting in the film cross-sections and responsible for its short- and long-term strength (fracture toughness) are also addressed. The analysis is geared to the GaN …

Comprehensive Modeling Of Optimal Paths To Reach Nearly Zero Energy Buildings (Nzebs) For New Constructions In Europe, Florida Solar Energy Center, Delia D'Agostino

FSEC Energy Research Center®

As established by the recast of the European Union (EU) Directive on Energy Performance of Buildings (EPBD), all new buildings have to be nearly zero energy buildings (nZEBs) by the end of 2020. However, reaching this result considering cost-optimality is still an open challenge. Balancing renewable power generation with energy efficiency to reach the nZEB target is a key goal of all EU Member States. We describe results obtained from the modeling of nZEBs for new constructions in Europe using the energy performance software EnergyPlus. The model performs hourly sequential simulations showing how to best achieve nearly zero energy home …

Composite Nanofibers As Advanced Materials For Li-Ion, Li-O2 And Li-S Batteries, Victor Agubra, Luis Zuniga, David Flores, Jahaziel Villarreal, Mataz Alcoutlabi

Mechanical Engineering Faculty Publications

The quest to increase the energy density and improve the cycle life performance of lithium ion batteries (LIBs) and beyond has led to the development of various suitable and alternative materials for energy storage and conversion. The morphology and electrode architecture in advanced battery materials have been re-designed into nanofibers and composite nanofibers. Nanofiber-based separators and electrodes have demonstrated to improve the energy density and cycling performance of LIBs. The improvement in the structure and morphology of nanofibers in LIBs such as LiSi and LiSn, have once again ignited the interest in these Li:M alloy anodes as alternative anode and …

Improved Sensitivity Mems Cantilever Sensor For Terahertz Photoacoustic Spectroscopy, Ronald A. Coutu Jr., Ivan R. Medvedev, Douglas T. Petkie

Faculty Publications

In this paper, a microelectromechanical system (MEMS) cantilever sensor was designed, modeled and fabricated to measure the terahertz (THz) radiation induced photoacoustic (PA) response of gases under low vacuum conditions. This work vastly improves cantilever sensitivity over previous efforts, by reducing internal beam stresses, minimizing out of plane beam curvature and optimizing beam damping. In addition, fabrication yield was improved by approximately 50% by filleting the cantilever’s anchor and free end to help reduce high stress areas that occurred during device fabrication and processing. All of the cantilever sensors were fabricated using silicon-on-insulator (SOI) wafers and tested in a custom …

Lattice Flexures: Geometries For Stiffness Reduction Of Blade Flexures, Larry L. Howell, Ezekiel G. Merriam

Faculty Publications

Reducing the motion-direction stiffness of compliant mechanisms reduces their actuation effort and simplifies associated static balancing mechanisms. This work introduces a flexure type called lattice flexures and evaluates some of their fundamental properties. Lattice flexures have a reduced bending stiffness when compared to traditional rectangular-section blade flexures of similar size. The motion-direction bending stiffness of two lattice flexure types, called X-type and V-type, are analytically derived, corroborated with finite element analysis, and validated with measurements of physical prototypes. The lattice flexure has the potential to reduce the bending stiffness of some compliant mechanisms by 60-80%, as demonstrated in devices manufactured …