Structural Materials Commons^™

Structural Repair And Performance Evaluation Of Aged Sbs Modified Asphalt, Xu Guang, Li Qishi, Kuang Huaping, Zhang Henglong, Zhou Ruibo, Chen Yanmei

Journal of China & Foreign Highway

To rejuvenate the excellent performance of aged styrene-butadiene-styrene （SBS） modified asphalt，colza oil bio-asphalt （COA） and polymethylene polyphenyl isocyanate （PAPI） were used in this study for adjusting the asphalt components and repairing SBS molecular structure，respectively.The above-mentioned dual regeneration mechanism was verified by comparing the effects of different rejuvenation components on the physical and rheological properties，as well as the molecular weight distribution of short-term aged SBS modified asphalt.Moreover，according to the change law of rheological properties of unaged base asphalt and SBS modified asphalt under the effect of dual regeneration agent，the influence of the regeneration agent on the phase angle platform area was …

Vessel Collision Force And Anti‑Collision Performance Of Long‑Span Beam‑Arch Composite Rigid Frame Bridge, Zhang Wenming, Wang Zhiwei, Lai Yaping

Journal of China & Foreign Highway

Beam-arch composite rigid frame bridge is a new bridge type，and it has few vessel collision studies.By taking the Lijia Jialing River Bridge as the engineering background，the standard value of vessel collision force and anti-collision performance of the long-span beam-arch composite rigid frame bridge were studied.After determining the representative vessel type and vessel collision calculation conditions，the vessel-bridge collision processes of the single-pier models under various calculation scenarios were simulated by using ANSYS/LS-DYNA nonlinear finite element transient dynamic software.The simulation results of collision forces were compared with the results of several empirical formulas.Finally，the full bridge model and the ultimate bearing capacity of …

Installation And Connection Mode Of Stiffening Beam Segment Of Steel Truss Suspension Bridge, Chen Changsong, Wu Junjie

Journal of China & Foreign Highway

During the construction of long-span steel truss suspension bridges，the main girder can be connected in segment-by-segment articulated connection method and rigid-articulated connection combination method.Taking a Yangtze River Highway Bridge in Hubei Province as an example，this paper established the plane calculation model of the full bridge using the Bridge Design and Construction Monitoring System BDCMS to simulate the above two connection methods of the main girder in construction.From the comprehensive analysis of chord member internal forces and line shape of the stiffening beam，this paper finds that the rigid-articulated connection combination method is more appropriate in the construction.In addition，this paper researched the …

Seismic Responses Of Cable‑Sta Yed Bridge Considering Ponding Effect Under Near‑Fa Ult Ground Motions, Lyu Long, Yu Deen, Yuan Yuhang, Yang Huaiyu

Journal of China & Foreign Highway

To study the influence of the pon ding e ffect on seismic responses of the cable-stayed bridge under near-fault ground motions，taking a double-tower cable-stayed bridge as the engineering background，this paper analyzed the ponding response of the main bridge and the main beam of the approach bridge of the cable-stayed bridge under near-fault ground motions and the influence of the ponding response on the structural seismic response.Besides，the influence of viscous dampers and elastic cables on the ponding effect of the cable-stayed bridge under near-fault ground motions was studied，which was compared with the seismic response of the cable-stayed bridge under far-fault ground …

Multi‑Dimensional And Multi‑Point Random Seismic Response Analysis Of Long‑Span Cable‑Stayed Bridges At Different Sites, Shi Yi, Lu Lu, Fan Shuli, Shen Meng, Zuo Chunyuan, Sun Xinguo, Cao Feifei

Journal of China & Foreign Highway

To study the random seismic response of long-span cable-stayed bridges at different sites，the site transfer function was used to evaluate the influence of different site conditions on ground motion propagation.By considering the traveling wave effect and the coherence effect，the multi-point power spectrum under different site conditions was generated.By using the pseudo excitation method for solving the absolute displacement，the seismic responses of cable-stayed bridges under uniform excitation and multi-dimensional and multi-point excitation at different sites were compared.A long-span cable-stayed bridge was selected as an example，and Ansys finite element software was used to analyze the random seismic response of the bridge.By considering …

Rigid Domain Optimization Of Steel Truss Joint With Reference To Multi‑Scale Model, Liu Gaocheng, Liu Jian, Dong Chuangwen, Li Chuanxi

Journal of China & Foreign Highway

The rigidity enhancement effect of the integral gusset plate is often simulated in the calculation of an integral nodal steel truss bridge by using a beam element with a rigid arm to improve the calculation accuracy.By taking Zhongshan Lianshwan Bridge as the engineering background，an optimization method based on a multi-scale truss model for nodal rigid domain simulation was proposed and verified.Five consecutive standard sections were selected as the study objects，and the beam element model with rigid arm and the multi-scale model of gusset plate substructure were established by using Ansys.The same boundary and loading conditions were applied.The deflection of the …

Impact Resistance Of Ecc Pipe Piles Based On Ls‑Dyna, Zeng Qingyou, Ye Chenfeng, Liu Junjun, Feng Kai, Cheng Peiyuan, Chen Weihong

Journal of China & Foreign Highway

To study the impact resistance of Engineering Cementitious Composite （ECC） pipe piles，this paper used ANSYS/LS-DYNA to simulate the impact of a vertical drop hammer on the pipe piles.The HJC constitutive model of ECC was established based on key parameters obtained from static tension and compression tests and dynamic compression tests.The correctness of the finite element model was verified by split Hopkinson Pressure Bar （SHPB） tests.The parametric analysis conducted on the pipe pile models compounded with different hammer mass and impact velocity yielded dynamic responses including the displacement，time-history curve of energy，and effective plastic strain diagrams of the pipe piles under various …

Comparative Study Of Different Ventilation Methods During Tunnel Construction, Yue Kun, Bao Xiaohua, Ao Xiang, Liu Kuan, Wu Han, Li Tao, Shen Jun

Journal of China & Foreign Highway

The continuous improvement of tunnel construction technology brings a rapid increase in the speed and mileage of tunnel excavation，during which ventilation is a main problem affecting construction efficiency and safety.Taking the Zhuhai Xingye Express （West Line ） tunnel project as an example，this paper studied the influences of forced ventilation，exhaust ventilation，and hybrid ventilation on the dilution and discharge of harmful gas CO near the tunnel face and the wind speed in the tunnel.The results show that hybrid ventilation performs better in CO dilution，while exhaust ventilation has higher CO emission efficiency with a lower wind speed near the working face.Therefore，although forced ventilation …

Stability Of Excavation Face Of Double‑Mode Shield In Earth Pressure Mode Crossing Fault Zone Of Pearl River, Tong Bin, Zhang Bin, Zhu Hanbiao, Wang Shuying

Journal of China & Foreign Highway

In view of the stability of the excavation face of the double-mode shield crossing the fault zone of the Pearl River，the project of the section from Hongshengsha Station to Yufengwei Station of the second phase of Guangzhou Metro Line Seven was studied.Through numerical simulations conducted to analyze the whole area and the local high-risk area of the shield crossing the fault zone of the Pearl River，this paper explored the construction risk of the shield crossing process.Besides，this paper analyzed the influence of different support stresses and grouting pressures on the stability of the excavation face and ground deformation，and finally，the tunneling parameters …

Development Trend On Raw Materials Market Of Ready‑Mixed Concrete Under Green Construction, Ding Hu, Ding Qingjun, Lin Haojun, Zhang Zhen

Journal of China & Foreign Highway

In the face of resource depletion，high energy consumption in production，high carbon emissions，and serious pollution brought by traditional pumpcrete raw materials，a variety of new raw materials have been gradually developed and promoted to conform with the green construction promoted by China ’s civil engineering industry，witnessing a stable increase in quality，output，and social recognition.High-quality natural river sand and pebbles are in short supply at the origin，and they can be explored in old silted river channels.Gravel and manufactured sand produced using large particle size natural pebbles，limestone，construction waste，and others as raw materials will become new substitutes.In the transformation and upgrading of production enterprises which tend …

Review Of Snow And Ice Melting Techniques For Road And Bridge In Cold Regions, Tang Liyun, Shao Haitao, Tang Huaming, Qiu Peiyong, Du Xiaoqi, Zhang Lei, Peng Hui

Journal of China & Foreign Highway

Snow and ice melting of road and bridge surfaces is crucial for traffic safety，but current research on snow and ice melting techniques mainly focuses on engineering effects and technical evaluation，without the analysis and elaboration from the perspective of their mechanisms.To this end，based on the different mechanisms，this study divided snow and ice melting techniques into three types and summarized them：passive deicing，active deicing，and energy utilization deicing.This study systematically evaluated the advantages and disadvantages of traditional deicing methods such as deicing agents and mechanical deicing，analyzed two active deicing techniques，namely inhibitive freezing pavement and phase change material pavement，discussed the environmental-friendly method for road deicing …

Post‑Evaluation Method For Decision‑Making And Implementation Of Highway Maintenance Projects Based On Ahp‑Dematel, Yu Wei, Yang Na, Li Jue

Journal of China & Foreign Highway

Addressing the current lack of post-evaluation management systems related to highways，particularly highway maintenance，this paper proposed a post-evaluation method for the decision-making and implementation of highway maintenance projects based on the combination of analytic hierarchy process （AHP） and decision-making trial and evaluation laboratory （DEMATEL ）.After building a post-evaluation model for the decision-making and implementation of highway maintenance projects and designing the evaluation process，this paper calculated key factors influencing the post-evaluation of the decision-making and implementation of highway maintenance projects and their respective comprehensive weights.The research results indicate that decision-making can possess higher accuracy and efficiency under the above calculation method，providing a …

Engineering Ceramic Ductility Into Aluminum Oxide, Krish Bhuva

Holster Scholar Projects

This project explores the enhancement of ductility in Aluminum Oxide (Al₂O₃) ceramics through microstructural engineering. The goal is to combine the hardness and stability of Al₂O₃ with enhanced ductility for diverse industrial applications. Inspired by the naturally occurring Itacolumite rock, known for its complex microstructure, this research aims to replicate similar microstructural features in engineering ceramics. By doping Al₂O₃ with Titanium Dioxide (TiO₂), Boron Nitride (BN), and a pore former, while employing innovative sintering techniques, we hypothesize that these modifications will lead to a measurable increase in ductility. Despite early challenges in achieving homogeneity in sintering, promising results were observed …

Concrete Design: Underwater Concrete Forms In A Saltwater Environment, Noah Z. Lau

Construction Management

This following project investigated the effects of salt on the concrete curing process. Concrete possesses numerous strengths, making it extremely versatile. This makes it one of the most utilized construction materials. New improved methods are constantly being developed for concrete’s application as a construction material. While concrete is a flexible material with many strengths, it is not without its flaws. Concrete, while strong in compression is weak in tension. It has long cure times and doesn’t generally handle moisture well. This paper evaluates concrete’s change in strength from letting concrete cure in a salt-based underwater environment. To determine the full …

Utilization Of Sodium Flame Synthesis For The Formation And Deposition Of Pure Metal Materials For Applications In Additive Manufacturing, Zachariah Wargel

McKelvey School of Engineering Graduate Student Theses & Dissertations

Advanced material classes, such as high temperature alloys, ceramics, and refractory materials have become a key area of focus for expansion in the realm of additive manufacturing. Factors such as high melting points, material homogeneity, and physical properties such as ductility limit the application of popular additive manufacturing methods to these material classes. By utilizing sodium flame synthesis and deposition (SFD) technology, nanoparticle materials can be synthesized via combustion in a laminar co-flow diffusion burner and impacted such that the deposits can be used to manufacture designed components. By using the applicable precursor materials of metal chlorides and elemental sodium …

Surface Patterning On Zirconia Dental Implants Via Laser-Induced Shockwave Imprinting, Inomjon Majidov

Masters Theses & Specialist Projects

Zirconia is rapidly becoming a preferred alternative to titanium in dental applications, primarily due to its aesthetic resemblance to natural teeth. This material’s tooth-like color avoids the aesthetic issues associated with the grey metal tint of titanium implants. Additionally, zirconia is hypoallergenic, making it an ideal choice for patients with metal sensitivities or allergies. Despite these advantages, zirconia generally exhibits lower biocompatibility and osseointegration compared to titanium implants. This study investigates laser-assisted, controlled imprinting technique on zirconia surfaces to enhance these properties. Our research used zirconia pellets, produced from powdered monoclinic zirconia pressed in a pellet press machine. Two methods …

On The Structure, Energy, And Segregation Behavior Of Grain Boundaries In Metallic Systems, Yasir Mahmood

All Dissertations

Nearly all structural metallic systems are multi-component polycrystalline aggregates; their microstructures are composed of crystalline grains that are internally joined at grain boundaries (GBs). This thesis focuses on GB structure, energy, and chemistry, as these greatly influence many material properties and processes, including boundary dynamics during processing treatments or under operating conditions.

Using atomistic simulations, we examine the impact of metastable GB structures on solute segregation. A wide range of GB geometries and metastable structures are used in our study. The Al-Mg alloy is used because it is of interest for light weighting. The atomistic simulation results are used to …

Physics-Informed Machine Learning Methods For Inverse Design Of Multi-Phase Materials With Targeted Mechanical Properties, Yunpeng Wu

All Dissertations

Advances in machine learning algorithms and applications have significantly enhanced engineering inverse design capabilities. This work focuses on the machine learning-based inverse design of material microstructures with targeted linear and nonlinear mechanical properties. It involves developing and applying predictive and generative physics-informed neural networks for both 2D and 3D multiphase materials.

The first investigation aims to develop a machine learning method for the inverse design of 2D multiphase materials, particularly porous materials. We first develop machine learning methods to understand the implicit relationship between a material's microstructure and its mechanical behavior. Specifically, we use ResNet-based models to predict the elastic …

Proportioning And Performance Of Ultra-High Performance Concrete (Uhpc) For High Friction Surface Treatment (Hfst) On Pavement And Bridge Decks, Adam R. Biehl

All Theses

High Friction Surface Treatment (HFST) is a roadway remediation technique used to improve pavement’s coefficient of friction, to enhance roadway safety. The application of HFSTs has repeatedly demonstrated the ability to significantly reduce crashes in both wet and dry conditions. Typically, epoxy-resins and calcined bauxite aggregate are used in HFST treatment. However, the high material costs and scarcity of calcined bauxite render this form of HFST an expensive and limited option for roadway rehabilitation. Therefore, the identification of alternative binders and HFST aggregates is needed for broad scale implementation. One potential alternative binder is Ultra-High-Performance Concrete (UHPC), a specialty cementitious …

Effect Of Aging Temperature On Properties Of Sealant Under Field Construction Conditions, Liu Hanchao, Teng Xinhua, Zhang Jingyan, Zhang Kaihua, Lin Hui

Journal of China & Foreign Highway

In order to study the influence of short-term aging temperature on the properties of sealant,a sealant was prepared,and field construction conditions were simulated.The properties of the sealant before and after short-term aging at 180‒220 ℃ were tested.The viscoelastic properties,physicochemical properties,and microstructures of the sealant were studied,and the mechanism of property changes was discussed.The results show that the cone penetration and flow value of the aged sealant decrease,while the softening point and elastic recovery rate increase.Aging at high temperature (>180 ℃) for a short time and low temperature (160 ℃) for a long time will cause obvious property changes.The tensile …

Experimental Study On Capillary Water‑Holding Characteristics Of Loess Backfill In Ecological Ditches, Nan Yalin, Zhang Xiaoyu, Chen Hong, An Peng, Liu Kui, Camara Ibrahima Kalil

Journal of China & Foreign Highway

The municipal ecological ditches have the basic functions of accumulating water for infiltration in the rainy season and conserving moisture in the dry season.However，the design of loess backfill in ecological ditches is based on no evidence，which often leads to landscape vegetation drowning in the rainy season or dying in the dry season.For this reason，a study was carried out by remoulding loess with a small-size capillary water rise height test，a large-size water-holding characteristic model test，and an unsaturated numerical analysis.The results show that the final capillary water rise height of the soil column can reach 100 cm when the dry density is …

Research On Performance Of Coal Gangue Concrete, Wang Jiliang, Ma Wenhui, Xu Weidong, Lyu Zhigang

Journal of China & Foreign Highway

Coal gangue is an industrial solid waste produced in the process of raw coal mining.It has a large stock and a relatively low utilization rate.Using coal gangue as concrete aggregate can not only solve the environmental pollution caused by coal gangue storage but also make up for the shortage of natural sand and gravel resources，which opens up an effective way for the large-scale utilization of coal gangue.According to the application characteristics of coal gangue as concrete aggregate，the chemical component，mineral composition，and physical properties of coal gangue were systematically analyzed.The influence of coal gangue as aggregate on the working performance，mechanical properties，volume stability，and …

Experimental Study On Shear Performance Of Uhpc‑Nc Interface, Wan Zhiyong, Chen Jianping, He Shaohua, Huang Xu, Sun Xiangdong

Journal of China & Foreign Highway

Ultra-high performance concrete （UHPC） has great application prospects in engineering structure reinforcement.The reliability of the bonding properties at the interface between the new UHPC reinforcement layer and the old concrete structure is critical for ensuring the serviceability of the reinforced structures.To determine the influence of different interface treatments on the bonding properties at the interface between the UHPC and normal concrete （NC），six Z-shaped UHPC-NC bonding specimens were designed，and the bonding properties of the UHPC-NC with three different kinds of interface，namely smooth，chisel，chisel + reinforced，were investigated.In addition，nonlinear finite element models for the concrete interface were established to determine the distribution law of …

Application Of Sequential Quadratic Programming Method In Cable Force Adjustment Of Cable‑Stayed Bridges, Xu Yufeng, Zhu Mengyang, Chen Si, Xie Yunfei

Journal of China & Foreign Highway

When the construction of a cable-stayed bridge enters the completion stage，due to various factors，there is a certain error between the actual alignment and internal force of the structure and the theoretical completion state，and it is usually necessary to adjust the cable force.In order to calculate the cable force adjustment of a cable-stayed bridge in the adjustment stage，a method based on an influence matrix and sequential quadratic programming was proposed to solve the cable force adjustment.A large-span hybrid girder cable-stayed bridge was taken as the background，and the alignment and internal force response values of the structure with varying cable units were …

Protection Design Of Middle Piers Of Overpass Bridges Based On Double Protection Concept, Lyu Sizhong, Wang Xin, Guo Jianmin, Liu Siyuan, Li Yuxin, Yang Fuyu

Journal of China & Foreign Highway

The collision accident types of middle piers of overpass bridges were summarized and analyzed，and it was proven that anti-collision and anti-scratching were two important requirements of pier protection.Then，the new concept of double protection and corresponding technical schemes were put forward.The first protection adopted the way of setting concrete barriers or ship-shaped elevating members on the periphery of the pier to prevent vehicles from impacting the pier，and the second protection used the self-wrapped steel plate or aluminum foam plate to prevent vehicles from scratching the pier.The safety of the pier protection structure schemes was verified by computer simulation and unit test，and …

Research On Yolov 5‑Ganomaly Joint Algorithm For High‑Strength Bolt Detection, Xie Haibo, Zhu Weijun, Zhang Bi2, Zhang Dahai

Journal of China & Foreign Highway

High-strength bolt loosening detection of bridges faces problems such as heavy workload，small targets，many anomalies，and difficult collection.Therefore，this paper proposed a semi-supervised deep learning model，which could obtain the bolt loosening detection model even with a small number of negative samples and solve the problem of unbalanced model training samples.The accuracy of the YOLOv 5-CT model for bolt target detection reached 98.33%.By preprocessing bolt data，the reconstruction ability of bolt images by the Ganomaly model was improved.When the hidden space vector value was 100，the model had the highest SAUC and the best discriminant performance.In the model test stage，the threshold of abnormal fraction was set …

Experimental Study On Effect Of Temperature On Bound Water Adsorption And Deformation Of High Liquid Limit Soil, Zi Yinhui, Shen Xuning, Zhang Hao, Zhang Rui, Li Lu

Journal of China & Foreign Highway

In order to study the effect of temperature change on the bound water content adsorbed by high liquid limit clay and the deformation law of high liquid limit clay embankment，the high liquid limit clay in Hainan Province was selected as the primary research object and compared with the low liquid limit sand in Hunan Province.The effect of temperature on the bound water content adsorbed by high liquid limit clay was explored through a nuclear magnetic resonance test.In addition，the effect of temperature on the deformation of high liquid limit clay embankments was analyzed through the consolidation test with a temperature-controlled consolidometer.The …

Temperature And Strain Development Characteristics Of Tunnel Concrete Based On Double Grating Sensors, Fang Jianping, Zhang Mengxi, Yao Xiaonan

Journal of China & Foreign Highway

In order to better prevent tunnel concrete from cracking，the development law of concrete temperature and strain was studied.Based on the connection project of Sanjiang Middle Road in the Smart New City of Quzhou，a data acquisition system was established to monitor concrete temperature and strain on site.The defects of the traditional method that the temperature and strain monitoring are insensitive，and the monitoring data is discontinuous were overcome.In addition，the high-performance double grating temperature-strain sensor was used to simultaneously monitor the temperature and strain at the same position，and the temperature compensation method was used to overcome the influence of the ambient temperature on …

Properties And Mechanism Of Reclaimed Asphalt Based On Sbs Structure Repair, Feng Xinjun, Yang Hongyang, Xiao Honghai, Zhu Ziqiang

Journal of China & Foreign Highway

At present，the common asphalt regenerant is used for treating the aged styrene-butadiene-styrene （SBS） modified asphalt in China，which fails to repair the SBS cross-networking structure，resulting in the poor regeneration effect of the aged SBS modified asphalt.In this study，a new reactive regenerator containing a structural repair agent，extractive oil，plasticizer，solubilizer，and a small amount of SBS was used to regenerate the aged SBS modified asphalt.The conventional properties and rheological properties of reclaimed SBS modified asphalt were studied by three index tests，Brookfield viscosity test，dynamic shear rheological test，and low temperature bending rheological test.Then，a fluorescence microscope and infrared spectrometer were used to study the regeneration mechanism of the …

Research On General Drawing Design Technologies For Cover Culverts In Hunan Province, Peng Xiaoming, Li Yukun, Hu Qiong, Xia Yutao

Journal of China & Foreign Highway

As one of the main structures of highways，a culvert has the characteristics of large quantity and wide range.Affected by design and construction factors，engineering diseases of culverts have been prominent for a long time.With the extensive promotion of the green highway construction concept and the continuous updating of technical standards and design specifications，the original general drawing of culverts fails to meet the needs of the sustainable and healthy development of highway construction under the new situation.Hunan Provincial Communications Planning，Survey & Design Institute has conducted extensive and in-depth investigation and research on the key technologies of highway culvert design and prepared a …