Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Mechanical Engineering (4)
- Other Materials Science and Engineering (4)
- Ceramic Materials (3)
- Chemical Engineering (3)
- Chemistry (3)
-
- Materials Chemistry (3)
- Metallurgy (3)
- Ocean Engineering (3)
- Physical Sciences and Mathematics (3)
- Semiconductor and Optical Materials (3)
- Condensed Matter Physics (2)
- Engineering Science and Materials (2)
- Mechanics of Materials (2)
- Physics (2)
- Risk Analysis (2)
- Atomic, Molecular and Optical Physics (1)
- Catalysis and Reaction Engineering (1)
- Engineering Education (1)
- Engineering Mechanics (1)
- Environmental Monitoring (1)
- Environmental Sciences (1)
- Inorganic Chemistry (1)
- Mining Engineering (1)
- Nanoscience and Nanotechnology (1)
- Other Engineering (1)
- Other Engineering Science and Materials (1)
- Other Physics (1)
- Keyword
-
- Allowable (1)
- Applied pressure (1)
- Biomass; Dopant; Graphene Oxide; Semiconductor; Synthesis Process (1)
- Capacitance response (1)
- Cost reduction (1)
-
- Electrophoretic infiltration (1)
- Energy storage (1)
- Ethyl cellulose (1)
- Fatigue (1)
- Freespan (1)
- Glassy carbo (1)
- Humidity sensor (1)
- Inspection data (1)
- Integrity (1)
- LaFeO3 (1)
- Liquefied natural gas; cryogenic service; full flange rating; pipe thickness (1)
- Niobium (1)
- Offshore platform (1)
- Pipeline Integrity Management (1)
- Pseudocapacitor (1)
- ROV (1)
- Rectification (1)
- Risk-based inspection (1)
- SSS (1)
- Seabed (1)
- SiCf/SiC composite (1)
- Sintering (1)
- Sol–gel (1)
- Spin coating (1)
- Surface modification (1)
Articles 1 - 8 of 8
Full-Text Articles in Structural Materials
Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani
Lafe0.925ti0.075o3 Perovskite Coated With Ethyl Cellulose: A High-Stability, Low-Hysteresis Platform For Advanced Humidity Sensing, Akhmad Futukhillah Fataba Alaih, Djoko Triyono, Rifqi Almusawi Rafsanjani
Makara Journal of Science
Humidity sensors are pivotal in numerous sectors, such as environmental monitoring, industrial automation, and health-care. This study presents the fabrication and detailed evaluation of an advanced humidity sensor using ethyl cellulose (EC)-coated LaFe0.925Ti0.075O3 (LFTO) perovskite nanoparticles synthesized via the sol-gel method. The LFTO nanopar-ticles exhibited a mesoporous structure with an enhanced surface area, which significantly improved their moisture adsorption capabilities. The innovative application of EC coating addresses critical substrate adhesion issues, enhancing mechanical stability without compromising sensor sensitivity. Comprehensive performance evaluations revealed minimal hysteresis (
An Overview Of Biomass-Derived Graphene Oxide And Its Characteristics For Future Sustainable Applications, Afif Wardana, Ahmad Nabil Shahab, Donanta Dhaneswara, Nofrijon Sofyan
An Overview Of Biomass-Derived Graphene Oxide And Its Characteristics For Future Sustainable Applications, Afif Wardana, Ahmad Nabil Shahab, Donanta Dhaneswara, Nofrijon Sofyan
Journal of Materials Exploration and Findings
The production of graphene oxide (GO) from biomass presents considerable promise as a sustainable alternative substitute for traditional semiconductors. Biomass waste, abundant and often underutilized worldwide, is distinguished by its high carbon content and regenerative characteristics, rendering it an optimal resource for sustainable material production. By heating its biopolymers, lignocellulosic biomass can be used as a new material to make graphene, which forms three-dimensional turbostratic crystallites. These crystallites, composed of partially defective aromatic carbon sheets with graphite-like characteristics, make it easier to create GO with specialized functions for cutting-edge applications. Its capability underscores the revolutionary potential of biomass waste in …
Effect Of Niobium Dopant On Zno Thin Films Prepared Via The Sol–Gel Spin Coating Method, Kevin Alvin Eswar, Nur Fairuz Rostan, Maryam Mohamad, Rabiatuladawiyah Md Akhir, Rosfayanti Rasmidi, Muliyadi Guliling, Najwa Ezira Azhar, Irmaizatussyehdany Buniyamin, Mohd Firdaus Malek, Mohamad Rusop Mahmood, Husairi Fadzilah Suhaimi, Saifollah Abdullah
Effect Of Niobium Dopant On Zno Thin Films Prepared Via The Sol–Gel Spin Coating Method, Kevin Alvin Eswar, Nur Fairuz Rostan, Maryam Mohamad, Rabiatuladawiyah Md Akhir, Rosfayanti Rasmidi, Muliyadi Guliling, Najwa Ezira Azhar, Irmaizatussyehdany Buniyamin, Mohd Firdaus Malek, Mohamad Rusop Mahmood, Husairi Fadzilah Suhaimi, Saifollah Abdullah
Makara Journal of Science
Thin films of zinc oxide (ZnO) and niobium (Nb)-doped ZnO were deposited on a glass substrate using the sol–gel spin coating method. Diethanolamine, isopropyl alcohol, and zinc acetate served as the stabilizers, solvent, and starting ma-terial, respectively. Niobium pentachloride was employed as the dopant source. Energy-dispersive X-ray analysis con-firmed Nb incorporation. Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and ultravio-let–visible spectroscopy (UV–Vis) analyses characterized the morphology, structure, and optics of the films, respective-ly. Both films, comprising nanoparticles, were visible in FESEM. Nb doping reduced the particle size from 44.2 nm to 35.8 nm. The XRD peaks at 31.23°, …
Preparation Of Β-Ni (Oh)2 Nanosheet–Modified Glassy Carbon For Pseudocapacitors, Muhammad Buchari Setia Putra, Aliyah Aliyah, Afiten Rahmin Sanjaya, Respati Kevin Pramadewandaru, Hoeil Chung, Tribidasari Anggraningrum Ivandini
Preparation Of Β-Ni (Oh)2 Nanosheet–Modified Glassy Carbon For Pseudocapacitors, Muhammad Buchari Setia Putra, Aliyah Aliyah, Afiten Rahmin Sanjaya, Respati Kevin Pramadewandaru, Hoeil Chung, Tribidasari Anggraningrum Ivandini
Makara Journal of Science
β-Nickel hydroxide (Ni(OH)2) nanosheet–modified glassy carbon for pseudocapacitors was successfully prepared. The nanosheets were synthesized via a conventional growth seeding method combined with hydrothermal treatment. Transmission electron microscopy (TEM) characterization indicated the hexagonal structure of the nanosheets of around 15 nm in size, and X-ray diffraction (XRD) pattern confirmed the β-phase lattice crystal. These nanosheets used to modify the glassy carbon surface, increased the electroactive surface area by around 15 times. Furthermore, electrochemical investigation of the modified glassy carbon revealed an excellent performance and a specific capacitance of 628.01 F g−1 at a 1 A g−1 …
Freespan Analysis For Subsea Pipeline Integrity Management Strategy, Nurul Hadi, Muhammad Helmi, Edo Cathaputra, Dedi Priadi, Donanta Dhaneswara
Freespan Analysis For Subsea Pipeline Integrity Management Strategy, Nurul Hadi, Muhammad Helmi, Edo Cathaputra, Dedi Priadi, Donanta Dhaneswara
Journal of Materials Exploration and Findings
Abstract. Over a rough seabed or on seabed subject to scour, freespans can occur when contact between a subsea pipeline and the seabed is lost over an acceptable distance. When this exceeds the allowable freespan length, design stresses can be exceeded, and a vortex induced vibration (VIV) response can be initiated, resulting in the risk of fatigue failure. If this is not predicted and controlled properly, it will affect pipeline integrity, leading to expensive rectification and intervention work. Freespan analysis consisted primarily of a screening check in which the as-found freespans from Remotely Operated Vehicle (ROV) or multibeam Side …
Structural Risk-Based Underwater Inspection (Rbui) As A Cost Reduction Of Field’S End Of Production Life, Ivan Fitrian Putra, Johny Wahyuadi Soedarsono, Mirza Mahendra, Yuki Haidir, Faisal Dwiyana Purnawarman, Iwan Sukirna, Widi Hernowo
Structural Risk-Based Underwater Inspection (Rbui) As A Cost Reduction Of Field’S End Of Production Life, Ivan Fitrian Putra, Johny Wahyuadi Soedarsono, Mirza Mahendra, Yuki Haidir, Faisal Dwiyana Purnawarman, Iwan Sukirna, Widi Hernowo
Journal of Materials Exploration and Findings
Mubadala Petroleum operates offshore platforms in a southern Makassar Straits that needs to be periodically inspected. The cost for the inspection is massive due to the high cost of mobilization and demobilization of vessels including crew and equipment. In response of a new approach to reduce cost, a Risk-Based Underwater Inspection (RBUI) methodology is developed. This RBUI purpose is to reduce the inspection interval of the offshore platform, from every 2 years to a longer period[1]. There are existing RBUI methodologies, which are already developed and implemented in other companies[5]. Purpose of this paper is to …
The Comparison Of Pipe Thickness Selection Method Using Full Flange Rating And Non-Full Flange Rating Of Cryogenic Services In An Lng Plant Construction, Ari Agustar, Isdaryanto Iskandar, Wahyuaji Narottama Putra
The Comparison Of Pipe Thickness Selection Method Using Full Flange Rating And Non-Full Flange Rating Of Cryogenic Services In An Lng Plant Construction, Ari Agustar, Isdaryanto Iskandar, Wahyuaji Narottama Putra
Journal of Materials Exploration and Findings
Significant growth of gas demand as a source of power generation for domestic use and industries, mainly in the developed countries, has forced the effort to secure the gas supplies located thousands of miles away across the sea as an economical way of gas transportation instead of transporting by pipeline. LNG technology was created as the solution. Natural gas is refrigerated below its boiling point (-160oC to -162oC), known as cryogenic temperature or cryogenic service. Material of Construction (MOC) selection report showed that 304/304L and 316/316L Stainless Steel pipe could withstand and be suitable for this …
Effect Of Applied Pressure During Sintering On The Densification And Mechanical Properties Of Sicf/Sic Composites Prepared By Electrophoretic Infiltration, Alfian Noviyanto
Effect Of Applied Pressure During Sintering On The Densification And Mechanical Properties Of Sicf/Sic Composites Prepared By Electrophoretic Infiltration, Alfian Noviyanto
Makara Journal of Science
SiC-fiber-reinforced SiC matrix ceramic (SiCf/SiC) composites were successfully fabricated by electrophoretic infiltration and sintering at various applied pressures. The effect of applied pressure (i.e., 5, 10, and 20 MPa) was thoroughly examined, and applied pressure appears to influence the densification and mechanical properties of SiCf/SiC composites. The densities of SiCf/SiC composites prepared at applied pressure of 5, 10, and 20 MPa were 2.99, 3.10, and 3.16 g/cm3, respectively. All samples showed dense microstructures in their matrix areas; however, many closed pores were found with increasing pressure. Pressure induced densification in the fiber …