Structural Materials Commons^™

Flexural Performance Of Deficient Rc Beams Repaired With Gfrp Composite, Zena Aljazaeri, Hayder Alghazali, Zuhair Al-Jaberi, John J. Myers

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Fiber-reinforced polymer composite materials have been improved for use in repairing and strengthening existing infrastructure over the past few decades. This case study focuses on the effect of confinement with GFRP strips on the structural performance of out-of-service beams in bridge applications due to the impact of over-height vehicles or inadequate lap-spliced reinforcements. In this study, beams with inadequate lap splices in the tension zone were utilized to mimic the damaged area in out-of-service RC beams. The proposed repair technique is a glass fiber-reinforced polymer (GFRP) composite in the form of longitudinal sheets and U-wrapped strips. The experimental study determined …

Improving The Concrete Compressive And Flexural Strength With A Low Fraction Addition Of Carboxylated Nitro-Oxidized Cellulose Nanofibrils From Banana Rachis, Ngesa Ezekiel Mushi, Emmanuel Kagya

Tanzania Journal of Science

Conventionally, concrete strength depends on the bonding interface, especially in hydrated products such as calcium silicate hydrate (CSH). As a result, concrete is sensitive to tensile load. With its unique properties, a low fraction of carboxylated nitro-oxidized cellulose nanofibrils (NOCNF) from the banana rachis is employed to improve the mechanical performance of the concrete nanostructurally. Compressive and flexural strength using the NOCNF content at 0, 0.05, and 0.1 wt.%, cured for 7 and 28 days, were evaluated. Notably, the compressive strength increased by 16 % and the flexural strength by 13 % at 0.1 wt.% NOCNF compared to plain concrete …

Characterization Of The Thermally Driven Red Hue Effect In Coated And Uncoated Concrete Systems: Implications For Post-Fire Assessment In Wildland Urban Interface Communities, Juan C. Palominos Jr

Master's Theses

The increasing frequency and intensity of Wildland-Urban Interface (WUI) wildfires, such as the destructive 2025 Pacific Palisades Fire that destroyed over 6,000 structures, have underscored the urgent need for rapid post-fire safety assessment methodologies. This study sought to quantitatively characterize the Thermally Driven Red Hue Effect (TRHE), a unique, irreversible color shift observed in architectural coatings and concrete substrates, to determine its reliability as a permanent visual record of thermal exposure. Concrete substrates were formulated with three distinct coarse aggregates: gold granite (14.7% Fe), red cinder (22.4% Fe), and green rock (33.6% Fe) and coated with a 20 PVC waterborne …

An Analytical Framework For Quantifying Urban And Community Resilience To Natural Hazards From Cell-Phone Gps-Location And Traffic-Flow Data, Georgios Chatzikyriakidis

Civil and Environmental Engineering Theses and Dissertations

Urban areas are increasingly exposed to natural hazards while accommodating a growing share of the global population, yet a consistent science-based framework for quantifying urban and community resilience remains lacking. This dissertation develops a physics-based analytical framework grounded in statistical mechanics and the quantitative theory of Brownian motion. A city is conceptualized as a complex medium in which citizens move analogously to Brownian particles within a viscoelastic environment, influenced by socioeconomic interactions and infrastructure functionality.

A central premise is that urban resilience, interpreted as engineering resilience (an outcome), can be quantified through a single metric: the mean-square displacement MSD=⟨r²(t)⟩, of …

Effect Of Curing Duration On Bridge Deck Concrete Performance, Zhaniya Omarova

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

This study evaluates the influence of curing duration on the performance of bridge deck concrete and investigates the feasibility of reducing curing periods without compromising structural and durability properties. Two concrete mixtures, a standard Nebraska Department of Transportation (NDOT) bridge deck mix (47BD) and an optimized reduced-cement-content mix (O47BD-R100), were evaluated under multiple curing durations Fresh, early-age, mechanical, durability, and shrinkage properties were assessed to characterize the effect of curing on concrete behavior. Internal relative humidity and temperature were monitored using embedded sensors to investigate moisture diffusion and its role in shrinkage development for lab specimens and full-scale slabs.

Results …

Comparative Study Of Cement-Rice Husk Ash Stabilized Bricks And Fired Clay Bricks, Daniel R. Samson, Emmanuel S. Leo

Tanzania Journal of Science

In some countries, fired clay bricks (FCBs) are widely used for construction, but their production is energy-intensive, relies largely on firewood, and contributes to deforestation and carbon emissions. This study explores unfired clay bricks stabilised with cement and rice husk ash (RHA) as a sustainable alternative, using Dakawa ward in the Morogoro Region, Tanzania, as a case study. The bricks, with a clay of plasticity index 17%, were stabilized with 6%, 10%, and 14% cement by mass, moulded into 40 mm cubes, and cured for 28 days. The compressive strengths achieved were 1.5, 3.6, and 4.1 MPa with water absorption …

Creation Of The 2-Way Cross Laminated Timber Subroutine For Computing Dynamic Analysis Parameters, Joseph Freitas

Architectural Engineering

This document will describe the inputs, methodology, and outputs for the CLT 2-way subroutine for cases with and without openings recently added to a proprietary structural analysis software. For the sake of simplicity, most of the discussion will be focused on cases without openings from here on out, as the verification process for a novel method for cases with openings is still in progress. The CLT 2-way module calculates multi-point resistance functions for panels without openings by automating the procedure outlined in an industry-standard structural design manual. The subroutine also finds the appropriate dynamic response factors, kinetic load multipliers, mass, …

Development Of A Novel Innovative Umbrella Falsework System For Concrete Slabs, Abdelazem Hashim

Theses and Dissertations

Formwork is one of the major elements that contribute to the cost and duration of concrete building projects. This is why optimizing such an element can lead to huge savings to all parties involved in the construction projects. With contractors facing huge challenges in such a competitive industry and employers seeking the least price and least duration for their projects, contractors are constantly under the obligations of finding the best alternatives to deliver their projects in terms of both time and money. Therefore, the main aim of this research project is to develop a falsework system, where the falsework system …

Data Set, R Scripts And Script Outputs For Manuscript: Manufacturing Systems: Characteristics And Dynamics, Alan J. Fitzmorris

Graduate Research Data

This file repository contains fifteen computer-generated datasets, two naturally occurring datasets, nineteen shipbuilding shop datasets, and sixty-one concrete plant datasets.  Each data set contains subdirectories associated with various aspects of the data analysis, including stationarity analysis, dynamic system analysis, and complexity analysis.  In each case, applicable R scripts are included.  The text file entitled “Directory_and_File_Names” depicts the directory structure and associated file names for a total of 225 directories encompassing 8008 files.

Buckling Analysis Of Auxetic Composite Laminates And Optimal Design Using Lamination Parameters And Machine Learning, Hans Bendon Maria Tamil Selvan

Mechanical and Aerospace Engineering Theses

Composite materials are widely used as structural panels in aerospace, automotive, and civil engineering applications, where buckling is often a critical failure mode. This thesis focuses on the analysis and design of composite laminates that maximize buckling performance under prescribed stiffness and thickness constraints.

The first part of the study investigates the buckling behavior of auxetic laminates, which exhibit a negative Poisson's ratio. While previous studies suggest that auxetic laminates can achieve higher critical buckling loads than non-auxetic laminates under simply supported boundary conditions with lateral restraint, the influence of other boundary conditions and plate aspect ratios has not been …

Multiphysics Simulation And Experimental Validation Of Phase Transformation And Hardness In Jominy End-Quenched Low-Alloy Steels, J. S. Alabi, E. Heidari, M. F. Buchely, K. Chandrashekhara, S. N. Lekakh, R. J. O'Malley, V. A. Athavale, A. Kumar

Materials Science and Engineering Faculty Research & Creative Works

High-volume industrial continuous hot-rolled steel heat treatment processes involve sophisticated multi-phase modeling. The performance of a given process can be optimized by coupling phase transformation kinetics with the cooling conditions of the process. This study develops a multiphysics model to simulate an intensive quenching process for steel, which is inherently transient and highly dependent on numerous parameters. The simulated object was a Jominy end-quenched specimen geometry using two commercial steels, AISI 4130 and AISI 4140, with the goal of transferring a verified methodology to the heat treatment process for industrial heavy-section products (bars, slabs). The simulation employs thermal, mechanical, and …

Bond Behavior Of Full-Scale Beams Using Sustainable Self-Compacting Concrete, Hayder H. Alghazali, Atheer H.M. Algburi, John J. Myers

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Sustainable concrete is a step towards greener and more eco-friendly concrete construction practices, helping to solve global environmental problems. The present study focuses on the bond behavior between steel reinforcement and greener self-compacting concrete, specifically sustainable self-compacting concrete (SUS-SCC). Three SUS-SCC mixtures with different fly ash (FA) to cement replacement levels of [50, 60, and 70% (by mass)] were developed. Twelve full-scale SUS-SCC beams with a cross-section of (305 x 57) mm and a total length of 3048 mm were cast and tested using a four-point load test setup. The effect of longitudinal and lateral steel reinforcement ratios in the …

Investigating The Properties Of Eco-Bricks Composed Of Sawdust, Bamboo, And Varying Composition Of Sugarcane Bagasse Ash And Portland Cement, Wilfred Victor C. Marasigan, Julia Sophia Antonia S. Encarnacion, Czyrus Michael A. Bajeta, Alijah F. Gonzales, Juan Carlo T. Gumangan

Sinaya: A Philippine Journal for Senior High School Teachers and Students

With the construction industry contributing nearly 40% of global greenhouse gas emissions, there is a growing need for innovative and sustainable building materials. This research investigates a new eco-friendly concrete brick incorporating sugarcane bagasse ash (SCBA), sawdust, and bamboo fibers. Three eco-brick mixtures, each containing 2% bamboo fiber and 10% sawdust by weight but with varying proportions of Portland cement (PC) and SCBA, were tested against a standard brick for compressive strength, flexural strength, and water absorption. The optimal mixture, with 2% bamboo fiber by weight, 10% sawdust by weight, 85% PC, and 15% SCBA, exhibits compressive and flexural strength …

Fire Fossils: Biomineral Infrastructures In Untangling Climates, Tanmayee More

Masters Theses

Diatoms drift, sediments sink, wildfires generate their own weather. Lightning strikes can blast sand into glass, and microscopic organisms do the same in the cold recesses of the ocean. What alchemies and metabolisms catalyze space, time, and energy? What are the thermodynamics of infrastructure in Climate Change?

Places, materials, and beings are afterimages. Through alchemical experiments, and multi-scalar imaging, I develop simulations of wildfires, and their profound, reverberating effects. In this thesis, a glass-meets-landscape experimental process enters these obscured conditions and renders new material relations for the built environment.

Evaluation Of Chloride Diffusion In Concrete Using Bulk Diffusion Test And Scanning Electron Microscopy, Payton Davis

Doctoral Dissertations and Master's Theses

Reinforced concrete is one of the most widely used construction materials in the world with many bridges and other major infrastructure consisting of such structural elements. A primary concern impacting the durability of concrete is chloride penetration in aggressive environments such as marine or coastal areas. In such environments, chloride ions can penetrate into the pores of concrete leading to the corrosion of embedded steel reinforcement which compromises the structural integrity of concrete. To investigate the issue, a comprehensive experimental program was designed and implemented which involved the preparation and testing of 31 different concrete mixes, each incorporating varying proportions …

Simulation-Based Models For Postearthquake Response: A Survey And Research Directions, Abhijit Gosavi, Lauryn A. Spearing, Lesley H. Sneed

Engineering Management and Systems Engineering Faculty Research & Creative Works

Computer simulation is increasingly being used by emergency planners as a tool to improve disaster response given that it can model real-world scenarios, such as earthquakes. Although there has been an increase in simulation research focused on disaster response, much of this literature is from disparate fields and across disaster scenarios. To bridge this gap, this paper surveys simulation-based models for post-earthquake response from the year 2000 onward. Advantages of simulation over closed-form statistical models are discussed. Three main subproblems in post-earthquake response models are explored: (1) service distribution (e.g., food, water), (2) infrastructure restoration (at the building and transportation …

Reuse Of Calcium Carbonate (Caco3) Recovered From Discarded Carpets As Filler In Fiber-Reinforced Polymer (Frp) Composites, Roshan Devkota

Graduate Theses, Dissertations, and Problem Reports (ETD)

Over four billion pounds of carpet are discarded annually in the United States, making carpet waste a significant environmental concern. Calcium carbonate (CaCo₃) constitutes up to 45% of the mass of most synthetic carpets. Reusing this CaCo₃ as a filler in the rapidly growing fiber-reinforced polymer (FRP) industry, which is projected to reach USD 10.38 billion, presents a low-cost, practical approach to developing a market-based solution to post-consumer carpet waste.

This study investigates the reuse of CaCo₃ recovered from discarded carpet backing as a filler in FRP composites, focusing on its mechanical viability in comparison to virgin CaCo₃. The methodology …

A Comparative Study Between Soft Structures And Hard Structures For The Protection Of Egypt’S Coastlines Against Climate Change, Donia Eldwib

Theses and Dissertations

Coastal communities worldwide face unprecedented threats from climate change, with rising sea levels, increased storm intensities, and accelerated coastal erosion posing significant risks. Egypt, with over 3,000 kilometers of coastlines along the Mediterranean and Red Seas, it is particularly vulnerable due to its densely populated and economically critical low-elevated coastal zones. With the Mediterranean Sea, and the Nile Delta specifically under huge threats, this study examines the different coastal protection strategies used to address these climate change impacts. Different coastal protection structures have been used throughout the years starting with the well-known hard structures moving on to greener alternatives such …

Anti-Corrosion Performance Of Magnesium Potassium Phosphate Cement Coating On Steel Reinforcement: The Effect Of Boric Acid, Fan Zhang, Jihui Qin, Kangyi Cai, John J. Myers, Hongyan Ma

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

It has recently been found that magnesium potassium phosphate cement (MKPC) paste coating applied on the surface of steel reinforcement can effectively retard the onset of corrosion and suppress corrosion reactions. However, the fast-setting nature of MKPC—which is a merit in repair—can be problematic in a practical engineering process of coating the steel reinforcement with MKPC paste. To address this problem, boric acid (H₃BO₃) was added as a retarder in an MKPC formulation to prolong the setting time. This work investigated the impact of boric acid (at 5% by weight of MgO) on the anti-corrosion performance …

Development Of Multifunctional Wood Composites With Integrated Phase Change Materials For Enhanced Thermal Management, Self-Healing, And Sustainability., Emmanuel Igbokwe

LSU Master's Theses

Abstract

This study focused on incorporating self-healing, flame retardancy, and energy harvesting capabilities into the wood composite to contribute to more sustainable and energy-efficient building practices. Oriented strand board has been widely used as sheath for roofing or dry walls in residential buildings. Residential buildings account for a large portion of energy consumption. Therefore, an oriented strand board with energy harvesting capability is highly desired. Additionally, flame retardancy and damage self-healing and end-of-life recycling are also critical features for buildings.

In this study, we prepared a novel oriented strand board by constructing sandwich structures. The face sheets of the sandwich …

Quality Assurance And Quality Control For Reinforced Concrete Inspections, Calvin O. Walters Jr.

Publications and Research

Ensuring the safety and longevity of structures is paramount in concrete construction projects. Cases like the Big Dig ceiling collapse, which occurred on July 10, 2006, when a concrete ceiling panel measuring 20' x 40' and debris weighing 26 short tons (52,000 lb) fell within Boston's Fort Point Channel Tunnel, underscore this importance (Wald, M. L., 2007). Quality Assurance (QA) and Quality Control (QC) are crucial in mitigating such risks. QA ensures that materials and methods meet predetermined performance, design, and reliability standards specified in contracts and customer arrangements. On the other hand, QC is a strategic process businesses use …

Testing Of Recycled Polypropylene As A Viable Structural Material (Quarter 2), Isabella Jimenez-Melendrez, Katherine Timbes, Jocelyn Embleton, Tauni Dela Cruz, Zyra Kingston, Emily Byrd, Jacob Stinger

Architectural Engineering

5.25 trillion plastic particles have been found in the oceans each year, 3 million water bottles are consumed each hour, and one million plastic bags are used each minute in the United States of America (Williams). The vast majority of conventional plastics such as polyethylene, polypropylene, polystyrene, and more, are non-biodegradable (Tokiwa). To make matters worse, 70% of this non-biodegradable plastic is discarded into landfills and inevitably makes its way into the environment (Williams,). Plastic products have become vital to the United States economy due to their many uses in the construction, packaging, transportation, and health care industries. However, this …

Structural Performance And Resiliency Of Reinforced Concrete Bridge Pier Columns, Multi-Column Piers, And Bridge Systems Subjected To Multiple Hazards – Fire, Collision, And Air Blast, Qusai Abdulkarim Alomari

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Given their close proximity to traffic and improper employment of protective systems, bridges and bridge piers are vulnerable to multi-hazard events triggered by vehicle collisions coupled with correlated and cascading events, such as explosions and fires. Despite recent catastrophic incidents that have highlighted the profound consequences of these extreme demands, including substantial damage, adverse economic impact, and loss of life, there has been a notable lack of research investigating the performance of bridges and bridge structural components under the aforementioned multi-hazards. Furthermore, current bridge design codes do not address these events assuming that, after these destructive events, replacement of the …

Evaluation Of Novel Jointless Engineered Cementitious Composites Ultrathin Whitetopping (Ecc-Utw), Ricardo Hungria

LSU Doctoral Dissertations

Ultrathin Whitetopping (UTW) is a rehabilitation technique that consists of placing a thin layer of concrete over a damaged asphalt pavement. While UTWs have demonstrated satisfactory performance in field tests, the inherent brittleness of concrete has led to the appearance of distresses. To address these distresses, Engineered Cementitious Composites (ECC) have been proposed for UTW applications, thanks to their exceptional attributes, including tensile ductility, flexural performance, and fatigue resistance. In this study, an ECC-UTW was constructed to investigate its potential as a viable solution. The project comprised two 18.3 m ECC sections with different thicknesses, namely 63.5 mm and 101.6 …

A Spike-Shaped Anchorage For Steel Reinforced Polymer (Srp)-Strengthened Concrete Structures, Xingxing Zou, Keenan L. Mcburney, Lesley H. Sneed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Steel reinforced polymer (SRP) composite has recently emerged as an effective and economical solution for strengthening of reinforced concrete (RC) structures. Premature debonding failure of unanchored SRP at low load levels generally governs the performance of RC structures strengthened with externally bonded SRP. Therefore, a novel yet simple spike-shaped anchorage system was proposed in this study to prevent the debonding failure of SRP and to improve the interfacial shear capacity. Experimental investigation through single-lap shear tests of SRP-concrete joints showed that the anchorage system changed the failure mode from composite debonding to fiber rupture. In addition, the anchorage system substantially …

Toward Low Carbon Footprint And Lightweight Masonry Alkali-Activated Material, Zina Ebrahim, Mohammad Mastali, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

The portland cement concrete industry and the masonry industry are undergoing changes in response to skilled labor shortages and concerns over climate and pollution. There may be interest from parts of the industry in lower carbon footprint and lightweight masonry products. Toward this aim, the use of hemp shiv--the woody core of the hemp plant--in alkali-activated concrete was investigated herein and shown to have a wide range of impacts on the hardened state characteristics of a material suitable for structural concrete masonry units (CMUs) in accordance with ASTM C90 requirements. Hemp shiv is well known for its use in hempcrete, …

Experimental Characterization And Computer Vision-Assisted Detection Of Pitting Corrosion On Stainless Steel Structural Members, Riley J. Muehler

Master's Theses

Pitting corrosion is a prevalent form of corrosive damage that can weaken, damage, and initiate failure in corrosion-resistant metallic materials. For instance, 304 stainless steel is commonly utilized in various structures (e.g., miter gates, heat exchangers, and storage tanks), but is prone to failure through pitting corrosion and stress corrosion cracking under mechanical loading, regardless of its high corrosion resistance. In this study, to better understand the pitting corrosion damage development, controlled corrosion experiments were conducted to generate pits on 304 stainless steel specimens with and without mechanical loading. The pit development over time was characterized using a high-resolution laser …

Multi-Physics Numerical Simulation Of Corrosion And Service Life Evaluation Of Novel Reinforced Concrete Systems, Jin Fan

Dissertations

Durability challenges of reinforced concrete materials can shorten the service life and increase the carbon footprint of civil infrastructure systems. Novel alternative materials, such as high-performance fiber reinforced cementitious composites (HPFRCCs) and recycled aggregate concrete (RAC), offer an alternative to tradi-tional concrete materials by increasing the service life of infrastructure or reducing raw material consumption, thereby reducing the life-cycle carbon footprint. Due, in part, to a lack of robust numerical tools, predicting the durability response of these emerging cementitious materials has been insufficiently addressed. A time-dependent multi-physics modeling framework is proposed and adopted to investigate the chloride induced deterioration mechanisms …

Assessment Of Bridge Pier Response To Fire, Vehicle Impact, And Air Blast, Chen Fang, Qusai Alomari, Daniel G. Linzell

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Highway bridges exposed to intentional or unintentional fire followed by combined vehicle impact and air blast are at risk of significant damage and, possibly, collapse. Limited studies examining the complex effects of these extreme demands on bridge support elements and parametrizing their response and damage are found in the open literature. Research that is presented is part of an ongoing numerical investigation examining round, multi-column, reinforced concrete (RC), bridge pier behavior subject to multi-hazard scenarios involving fire, vehicle impact, and air blast. Detailed nonlinear finite element analysis models of single columns and multi-column piers supported by a pile foundation system …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …