Materials Science and Engineering Commons^™

A High Quality And Quantity Hybrid Perovskite Quantum Dots (Cspbx3, X= Cl, Br And I) Powders Synthesis Via Ionic Displacement, Yuhang Yin, Weiling Luan, Chengxi Zhang, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Recently, all-inorganic perovskites CsPbX₃ (X= Cl, Br and I) quantum dots (QDs) have drawn great attentions because of their PL spectra tunable over the whole visible spectral region (400-700 nm) and adjustable bandgap, which revealed a promising potential on the field of photoelectronic devices, such as solar cells, LEDs and sensors. In this paper, CsPbX₃ QDs and hybrid QDs, CsPbClxBr3-x and CsPbBrxI3-x were synthesized via one-step and two-step methods comparably. The optical bandgaps of CsPbCl₃, CsPbBr₃, and CsPbI₃, were calculated as 3.08, 2.36, and 1.73eV, respectively, based on the Tauc's equation and …

Development Of Wo3 Nanostructure By Acid Treatment And Annealing, T Sanasi, S Pinitsoontorn, M Horprathum, P Eiamchai, C Chananonnawathorn, W Hincheeranun

Journal of Metals, Materials and Minerals

Tungsten oxide (WO3) nanostructure is an interesting material for many applications such as batteries, gas sensors, photocatalysts, display utilizing, and smart windows. In this work, we fabricated the WO3 nanoplates by sputtering, acid treatment and annealing. Firstly, a tungsten film was deposited on a silicon or glass substrate by sputtering. The film was then immersed in nitric acid (HNO3) at 80 °C. The effect of the exposure time, and annealing temperature was investigated. After the acid treatment, the tungsten oxide hydrate or tungstile (WO3•H2O) with nanoplate structure was developed. The optical transmittance in the visible range was significantly improved compared …

Preparation Of Benzoxazine Monomers And Prepolymers From Continuous Reactor: Effects Of Molecular Architecture On Properties, Andrew S. Frazee

Dissertations

Despite the modularity in molecular design and high-performance properties of benzoxazine thermoset chemistries, there are two primary shortcomings of benzoxazine marketability. Firstly, multifunctional benzoxazines are unfavorable for processing as they are glassy solids at ambient temperature. Secondly, benzoxazine chemistries are commercially synthesized using batch reactors, which are energy intensive and require the use of environmentally unfavorable solvents.

The purpose of the work herein is to address these shortcomings, which include:

1.) interrelationships between molecular architectures of synthesized monofunctional benzoxazine monomers and their ambient temperature physical states (i.e. liquid or solid) using molecular dynamics simulations and experimental comparisons,

2.) continuous high-shear …

Thermodynamics And Kinetics Of Dna Origami Cross-Tile Array Formation, Brett Michael Ward

Boise State University Theses and Dissertations

As the cost to continue scaling photolithography to pattern smaller semiconducting devices increases exponentially, new materials and fabrication approaches are being sought to extend and enhance current capabilities. DNA nanostructures have been identified as a promising material for patterning nanoscale devices, and several studies have demonstrated the ability to program DNA nanostructures to self-assemble into large scale arrays. These DNA arrays can be designed to create the patterns necessary for fabricating semiconductor device features. However, these structures are far from ideal and contain a number of defects that limit the adoption of this approach for manufacturing. In order to create …

Effects Of The Internal Magnetic Field On The Magneto-Mechanical Properties Of Magnetic Shape Memory Alloys, Anthony Hobza

Boise State University Theses and Dissertations

Shape memory alloys are a class of functional material which recover from large strains without permanent deformation. The strain is accommodated by the displacement of twin boundaries in the martensite phase. The shape memory alloy Ni-Mn-Ga is also ferromagnetic. Ni-Mn-Ga preferentially magnetizes along a certain crystallographic axis. This direction of easy magnetization changes across twin boundaries, such that the directions in neighboring twin domains are nearly perpendicular.

The interaction of magnetic moments and interfaces including the crystal surface and twin boundary interfaces has a large role in the magnetization process of the material. The goal of this study is to …

A Comparison Study Of Composite Laminated Plates With Holes Under Tension, Joun S. Kim

Master's Theses

A Comparison Study of Composite Laminated Plates with Holes under Tension

A study was conducted to quantify the accuracy of numerical approximations to deem sufficiency in validating structural composite design, thus minimizing, or even eliminating the need for experimental test. Error values for stress and strain were compared between Finite Element Analysis (FEA) and analytical (Classical Laminated Plate Theory), and FEA and experimental tensile test for two composite plate designs under tension: a cross-ply composite plate design of [(0/90)4]s, and a quasi-isotropic layup design of [02/+45/-45/902]s, each with a single, centered hole of 1/8” diameter, and 1/4" diameter (four sets …

Block Copolymer Nanostructures For Inorganic Oxide Nanopatterning, Krishna Pandey

Graduate Theses/Dissertations

Self-assembled nature of block copolymer (BCP) makes them ideal for emerging technologies in nanometer scale. The micro phase separation between two or more dissimilar polymer blocks of BCP leads to uniform periodic nanostructures of different domains of dimension in the range of 5-100 nm, good for the development of emerging microelectronic and optoelectronics devices. Molecular weight and chain architecture of each blocks govern the morphology evolution; gives different structure like spherical, micelles, lamellae, cylindrical, gyroid etc. The morphology evolution of BCP nanostructure also depends on different external factors as well. In the first work of this thesis, three external factors …

Kinetic Study Of Chitosan-Alginate Biopolymeric Nanoparticles For The Controlled Release Of Curcumin Diethyl Disuccinate, S Bhunchu, P Rojsitthisak, P Rojsitthisak

Journal of Metals, Materials and Minerals

The aim of this study was to investigate the release profile, and evaluate the best fitted kinetic model and mechanism, of curcumin diethyl disuccinate (CDD) from chitosan-alginate biopolymeric nanoparticles (CANPs) in simulated gastrointestinal fluids (without enzymes) and simulated body fluid. The CDD-loaded CANPs (CDD-CANPs) were prepared by oil-in-water emulsification and ionotropic gelation under the previously reported optimal condition (3 mg/mL of CDD, 4.05% (w/v) of TweenTM 80 and a chitosan:alginate mass ratio of 0.05:1), which resulted in CDD-CANPs with a favorable particle size (327±14 nm), zeta potential (-27.3±0.2 mV), encapsulation efficiency (51.2±2.2%) and loading capacity (11.2±0.8%). The in vitro release …

Utilization Of Aluminium Dross As A Main Raw Material For Synthesis Of Geopolymer, P Puksisuwan, P Laoratanakul, B Cherdhirunkorn

Journal of Metals, Materials and Minerals

Aluminium dross contains both small particles and large agglomerates, where the recyclable part is the large agglomerates with high aluminium metal content. The residual Al dross is unrecyclable small particles with very low aluminium metal content. In this research, the residual Al dross from the aluminium recycle industry and the bagasse ash from a biomass power plant were used as main raw materials for geopolymer fabrication with alkaline solutions (Na2SiO3 and NaOH) using in the typical geopolymerization process. After mixing with alkaline solutions, the mixtures were uniaxially pressed into a cylinder die. The samples were cured for 3, 7, 14 …

Synthesis And Characterization Of Glycidyl Methacrylate-Based Graft Copolymer Functional Interfaces, Nikolay Brordinov

All Dissertations

Modification of materials properties such as surface energy, wettability, ability to absorb, contain or release specific type of chemicals enables practical application of these materials in various scientific and engineering set-ups. However, designing protocol that could be easily adapted for different situations and simultaneously unlock multiple variations of the resulting properties is a non-trivial task. This dissertation is devoted to application of glycidyl methacrylate-based graft copolymers for the purposes of surface modification, establishing fundamental trends and dependencies of this process and exploring the possible range of applications. These materials have extremely valuable property to undergo controllable post-synthetic modifications including surface …

Nanograin Size Effects On The Strength Of Biphase Nanolayered Composites, Sixie Huang, Irene J. Beyerlein, Caizhi Zhou

Materials Science and Engineering Faculty Research & Creative Works

In this work, we employ atomic-scale simulations to uncover the interface-driven deformation mechanisms in biphase nanolayered composites. Two internal boundaries persist in these materials, the interlayer crystalline boundaries and intralayer biphase interfaces, and both have nanoscale dimensions. These internal surfaces are known to control the activation and motion of dislocations, and despite the fact that most of these materials bear both types of interfaces. From our calculations, we find that the first defect event, signifying yield, is controlled by the intralayer spacing (grain size, d), and not the intralayer biphase spacing (layer thickness, h). The interplay of two internal sizes …

Controlled Electrochemical Reduction Of Gold And Palladium Metal Precursors In Polyaniline, Nicole Goodwin

UNLV Theses, Dissertations, Professional Papers, and Capstones

Polyaniline (PANI) has been extensively studied due to its unique electrochemical properties. The conjugated polymer is conductive with high chemical stability below 100°C, mechanical strength, and large surface area. The applications of PANI have included chemical sensing, corrosion inhibition coatings, light emitting diode and as a substrate for metal composite catalysts. Both chemical and electrochemical methods have been developed and utilized in the synthesis of PANI/metal composites. The simultaneous reduction of aniline and metal precursor produces a composite of PANI encapsulated metal, reducing the active surface area available for catalysis. Alternatively, chemical reduction of the metal precursor into preformed PANI …

Surface And Interface Characterization Of Solution-Processed Metal Oxides And Pedot:Pss Using Photoelectron Spectroscopy, Lynette M. Kogler

UNLV Theses, Dissertations, Professional Papers, and Capstones

Solution-processed materials are appealing for use in printable electronics as a means to lower production costs, but precise control of the process is crucial for achieving the desired properties in the final materials and their interfaces. Electronic interface properties depend on both the involved materials and their fabrication processes, impacting the development and commercialization of these materials. Analyzing the chemical and electronic structure of these materials, particularly at the surfaces and interfaces, is important not only for insuring that the materials have the desired properties, but also for understanding the effects of the fabrication process and how to modify properties …

Design, Analysis, And Application Of A Cellular Material/Structure Model For Metal Based Additive Manufacturing Process., Shanshan Zhang

Electronic Theses and Dissertations

Powder bed fusion additive manufacturing (PBF-AM) has been broadly utilized to fabricate lightweight cellular structures, which have promising potentials in many engineering applications such as biomedical prosthesis, aerospace, and architectural structures due to their high performance-to-weight ratios and unique property tailorabilities. To date, there is still a lack of adequate understanding of how the cellular materials are influenced by both the geometry designs and process parameters, which significantly hinders the effective design of cellular structures fabricated by PBF-AM for critical applications. This study aims to demonstrate a cellular structure design methodology that integrates geometrical design and process-material property designs. Utilizing …

Material Properties Design Using Simulations And Experiments For Powder Injection Molding Of Lead Zirconate Titanate (Pzt)., Bhushan Pramod Bandiwadekar

Electronic Theses and Dissertations

Powder injection molding (PIM) process simulations can be performed to minimize the number of injection molding experiments by estimating material properties necessary for PIM simulations. In current work, lead zirconate titanate (PZT) powder-polymer binder feedstock was compounded for 45 vol. % and 52 vol. % solids loading. PIM experiments on designed micro-pillar array geometry were performed using 52 vol. % PZT. Using PIM experiments results as basis, PIM simulations were performed on designed micro-pillar array geometries to understand the effectiveness of PIM simulations with the use of estimated feedstock properties in predicting molding behavior that have micro-features. Additionally, PIM simulations …

A Study Of Manganese And Cobalt Incorporated Nickel Oxide Based Core-Shell Magnetic Nanoparticles, Samiul Hasan

Graduate Theses/Dissertations

The synthesis along with the structural and magnetic properties of manganese (Mn) and cobalt (Co) -incorporated nickel oxide (NiO) inverted core-shell nanoparticles (CSNs) were investigated. The primary objective of this study was to determine the effect of substitution of nickel (Ni) by transition metal ions (Mn²⁺/Co²⁺) in affecting the magnetic properties of the resultant CSNs. The core of the CSNs is comprised of NiO and the shell constitutes a Ni_x(Mn/Co)_1-xO phase. The synthesis of the CSNs was accomplished in two steps: first, NiO nanoparticles were synthesized using a thermal decomposition method. In …

Structural And Elastic Properties Of Degenerate Sno Monolayers At Finite Temperature, Afsana Sharmin

Graduate Theses and Dissertations

Chalcogen-based layered superconductors with a litharge structure such as FeS and FeSe mono-layers undergo structural and superconducting phase transitions that are tunable by doping. Representing another material platform with a litharge structure but without valence d-electrons, SnO monolayers also display a structural ground state with a degenerate rectangular unit cell at zero temperature and a charge-tunable energy barrier that leads to a thermally-controllable structural phase change. Doped SnO monolayers with rectangular degenerate unit cells give rise to two-dimensional multiferroicity. Their two-dimensional elastic energy landscape adopts a basic analytic expression that is employed to discuss this structural transition. The results contained …

Modeling And Simulation Of Iii-Nitride-Based Solar Cells Using Nextnano®, Malak Refaei

Graduate Theses and Dissertations

Nextnano³ software is a well-known package for simulating semiconductor band-structures at the nanoscale and predicting the general electronic structure. In this work, it is further demonstrated as a viable tool for the simulation of III-nitride solar cells. In order to prove this feasibility, the generally accepted solar cell simulation package, PC1D, was chosen for comparison. To critique the results from both PC1D and Nextnano3, the fundamental drift-diffusion equations were used to calculate the performance of a simple p-n homojunction solar cell device analytically. Silicon was picked as the material for this comparison between the outputs of the two simulators as …

Generalized Ellipsometry On Complex Nanostructures And Low-Symmetry Materials, Alyssa Mock

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, complex anisotropic materials are investigated and characterized by generalized ellipsometry. In recent years, anisotropic materials have gained considerable interest for novel applications in electronic and optoelectronic devices, mostly due to unique properties that originate from reduced crystal symmetry. Examples include white solid-state lighting devices which have become ubiquitous just recently, and the emergence of high-power, high-voltage electronic transistors and switches in all-electric vehicles. The incorporation of single crystalline material with low crystal symmetry into novel device structures requires reconsideration of existing optical characterization approaches. Here, the generalized ellipsometry concept is extended to include applications for materials with …

Studies On Stable Crack Growth, Mohammed Juma Humaid Al-Ghafri

Theses

The goal of this work is to experimentally investigate the stable crack growth (SCG) fracture behavior of AISI 4340 alloy steel. A series of mode I and mixed mode SCG fracture tests were carried out on 8 mm thick compact tension (CT) specimens subjected to quasistatic loading. The wire cutting technique was used to introduce a pre-notch/ pre-crack of 0.05 mm root radius to the specimen. Five different loading angles Ψ between the loading axis and the crack surface were employed; 90° (mode I), 75°, 65°, 60° and 50°. Five different ratios of original crack length to specimen width a …

Development Of A Ferrite-Based Electromagnetic Wave Detector, Muhammad Hanis Bin Zakariah, Poppy Puspitasari, Nur Azliza Ahmad

Journal of Mechanical Engineering Science and Technology (JMEST)

Direct detection of hydrocarbon by an active source using electromagnetic (EM) wave termed Sea Bed Logging (SBL) has shown very promising results. However, currently available electromagnetic wave technology has a number of challenges including sensitivity and lapsed time. Our initial response to this issue is to develop a ferrite-based EM wave detector for Sea Bed Logging (SBL). Ferrite bar and copper rings in various diameters were used as detector 1 (D1). For Detector 2 (D2), toroid added with copper wires in different lengths at the centre of it were used. The first experiment is to determine the inductance and resistance …

Thermogravimetric And Kinetic Analysis Of Cassava Starch Based Bioplastic, Nanang Eko Wahyuningtiyas, Heru Suryanto, Eddy Rudiyanto, Sukarni Sukarni, Poppy Puspitasari

Journal of Mechanical Engineering Science and Technology (JMEST)

Cassava starch based bioplasticfor packaging application has great potency because of the various starchproducing plants in Indonesia.Bioplasticcan contribute to reduce the dependence on fossil fuels andpetroleumthat can solve the environmentalproblem.Thepurpose of this research is to find out the thermal decomposition and the activation energy of cassava starch based bioplastic. The methods weresynthesis bioplastic with cassava starch as main component and glycerol as plasticizer. The thermogravimetry analysis was conducted to obtain the decomposition process mechanism of bioplastic and the heating valueof bioplasticwas measured using theadiabatic bomb calorimetric. Data analysis was conducted using a fitting model approach with an acikalin method to …

Formula Of Moulding Sand, Bentonite And Portland Cement To Improve The Quality Of Al-Si Cast Alloy, Andoko Andoko, Poppy Puspitasari, Avita Ayu Permanasari, Didin Zakaria Lubis

Journal of Mechanical Engineering Science and Technology (JMEST)

A binder is any material used to strengthen the bonding of moulding sand grains. The primary function of the binder is to hold the moulding sand and other materialstogether to produce high-quality casts. In this study, there were four binder compositions being tested, i.e. 5% bentonite + 5% Portland cement, 4% bentonite + 6% Portland cement, 6% bentonite + 4% Portland cement, and 7% bentonite + 3% Portland cement. Each specimen was measured for its compressive strength, shear strength, tensile strength and permeability. The highest compressive strength was obtained fromthe specimen composed of 6% bentonite+ 4% Portland cement. The highest …

Blanking Clearance And Punch Velocity Effects On The Sheared Edge Characteristic In Micro-Blanking Of Commercially Pure Copper Sheet, Didin Zakariya Lubis, Ichsan Ristiawan

Journal of Mechanical Engineering Science and Technology (JMEST)

This study aims to identify the influences between clearance and punch velocity on the part edge quality of blanked parts. Experiments have been conducted using material copper, punch-die clearance and punch velocity variations. In order to determine the reachable punch-die clearance and punch velocity required for blanking. The quality of the part-edge characteristics shows that higher punch velocity and decreases clearance value can improve the part-edge quality, resulting in smaller burr height and rollover, and a larger shear zone. Furthermore, it could be observed that the part-edge quality improvement when blanking with high punch velocity is much more distinct for …

Modeling Of Antenna For Deep Target Hydrocarbon Exploration, Nadeem Nasir, Noorhana Yahya, Hasnah Mohd Zaid, Afza Shafie, Norhisham Hamid

Journal of Mechanical Engineering Science and Technology (JMEST)

Nowadays control source electromagnetic method is used for offshore hydrocarbon exploration. Hydrocarbon detection in sea bed logging (SBL) is a very challenging task for deep target hydrocarbon reservoir. Response of electromagnetic (EM) field from marine environment is very low and it is very difficult to predict deep target reservoir below 2km from the sea floor. This work premise deals with modeling of new antenna for deep water deep target hydrocarbon exploration. Conventional and new EM antennas at 0.125Hz frequency are used in modeling for the detection of deep target hydrocarbon reservoir. The proposed area of the seabed model (40km ´ …

Properties Of Brass Under Different Pouring Temperatures In Sand Casting Process, Poppy Puspitasari, Avita Ayu Permanasari, Andoko Andoko, Bayu Angga Pratama

Journal of Mechanical Engineering Science and Technology (JMEST)

This study aimed to determine the toughness of casts produced by the sand casting process at various temperatures against brass, and to investigate the structure contained in the cast madeusing abrass metal mould. This study was experimental research that observed the results of a treatment applied to a specimen group. This pre-experimental study usedthe one-shot case study model in which a group of samples was given treatment. The results showed that the specimen poured at 900°C exhibiteda microstructure consisting ofgood Cu-Zn content, while that at 700°Chad the least Cu content. It indicates that the higher the temperature used for metal …

Compositional And Structural Evolution During Ball Milling Of Ti-Based Metallic Glass Powder, Yanuar Rohmat Aji Pradana

Journal of Mechanical Engineering Science and Technology (JMEST)

Ti42Zr40Ta3Si7.5Sn7.5metallic glass powder prepared for subsequent consolidation by hot pressing were produced by high energy ball milling from amorphous ribbon and both of the compositional and structural evolution on milled powders were studied using XRD and DSC analyses. By using WC vial and balls, the abrasion of milling media occurred causing WC contamination on < 105 µm milled powder after 2 cycles of milling. Based on DSC analysis, the contamination clearly reduced theΔTxof the alloy up to 48%. On the other hand, the contamination were overcome after milling using SS vial and balls, proved by no crystal peak observed on XRD pattern of all milling cycle levels. However, the thermal stability was noticed to be decreased implying the presence of nanocrystals on the amorphous powder after ball milling and the nanocrystal amount tend to be higher when more milling cycles were applied.

Bridge Build, Andrew Little

Student Scholarship

Bridge build design that includes not only a building process, but a research paper to make the best build possible as well.

Ptfe-Based Microreactor System For The Continuous Synthesis Of Full-Visible-Spectrum Emitting Cesium Lead Halide Perovskite Nanocrystals, Chengxi Zhang, Weiling Luan, Yuhang Yin, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Colloidal perovskite nanocrystals comprised of all inorganic cesium lead halide (CsPbX₃, X = Cl, Br, I or a mixture thereof) have potential as optical gain materials due to their high luminescence efficiency. In this work, cesium lead halide nanocrystals are continuously synthesized via a microreactor system consisting of poly(tetrafluoroethylene) (PTFE) capillaries. The synthesized nanocrystals possess excellent optical properties, including a full width at half maximum of 19–35 nm, high fluorescence quantum yield of 47.8–90.55%, and photoluminescence emission in the range of 450–700 nm. For the same precursor concentrations, the photoluminescence emission peak generally increases with increasing reaction temperature, …

Effect Of Oxide On Surface Tension Of Molten Metal, Chunkai Li, Yu Shi, Yufen Gu, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Oxides as one of the commonly activating fluxes used in active tungsten inert gas welding (A-TIG welding) can dramatically increase the penetration depth to 2–4 times that of conventional welding. Using the oscillation principle of inviscid fluid, a robust method is developed to measure the average surface tension of molten metal during A-TIG welding for four different oxide activating fluxes of B₂O₃, TiO₂, SiO₂, and MgO. The experimental results suggest that the oxygen released from the decomposition of oxides is the dominant factor contributing to the change of the surface tension, which …