Materials Science and Engineering Commons^™

The Role Of Catalytic Residue PKA On The Hydrolysis/Transglycosylation Partition In Family 3 Β-Glucosidases, Inacrist Geronimo, Christina M. Payne, Mats Sandgren

Chemical and Materials Engineering Faculty Publications

β-Glucosidases (βgls) primarily catalyze the hydrolysis of the terminal glycosidic bond at the non-reducing end of β-glucosides, although glycosidic bond synthesis (called transglycosylation) can also occur in the presence of another acceptor. In the final reaction step, the glucose product or another substrate competes with water for transfer to the glycosyl-enzyme intermediate. The factors governing the balance between the two pathways are not fully known; however, the involvement of ionizable residues in binding and catalysis suggests that their pK_a may play a role. Through constant pH molecular dynamics simulations of a glycoside hydrolase Family 3 (GH3) βgl, we …

3d Printing – An Insider’S Perspective, Siddharth Sah

The Transdisciplinary STEAM+ Journal

The 3D printing market globally is still at its infancy, - or some might argue that there isn’t really a market yet. The knowledge of 3D printing design is still largely limited to engineering design – not product design. At MakeWhale, we are constantly pushing the boundaries of the application of 3D printing technology to consumer products resulting in a beautiful mix of technology and art.

The Inter-Laminar Shearing Effect On Wrinkle Development In Composite Forming Processes, David Sundquist

McKelvey School of Engineering Graduate Student Theses & Dissertations

Composite materials are becoming prevalent in aerospace industries as the uniqueness of the composite structure allows the composite to be tailored specifically for individual applications. Many fabrication techniques produce defects in composite parts such as wrinkles, fiber waviness, fiber misalignment, and porosity. The driving mechanisms behind these defects occurring during forming processes are not fully understood and, thus, characterization formation of these defects in a uncured state is beneficial to optimize composite processing. This work primarily investigated the influence of how uncured pre-impregnated carbon ply properties affect the wrinkling behavior of a composite laminates. Several factors affecting composite ply forming …

Functional Bio-Nano Hybrids Through A Precise Control Of Interfacial Interactions At The Nanoscale, Sirimuvva Tadepalli

McKelvey School of Engineering Graduate Student Theses & Dissertations

During the course of evolution, proteins have evolved to perform exquisite functions including structural support, signal transduction, actuation, sensing, catalysis, trafficking, gating, light-harvesting, charge transfer, molecular recognition, self-assembly, self-organization, or combinations of two or more of these functions. A precise control and manipulation of the structure and function of proteins is conceivable with the advent of nanotechnology, which has facilitated the integration of nanomaterials with functional biomolecules to realize bio-nano hybrids with synergistically enhanced functionalities.

At the genesis of bionanotechnology, a paucity in the fundamental understanding of the bio-nano interfaces is a grave impediment to the progress of the field. …

Characterization And Modeling Of Asphalt Concrete For Dynamic Properties And Performances, A S M A. Rahman

Civil Engineering ETDs

The recently developed mechanistic-empirical pavement design guide (MEPDG, also known as Pavement M-E design method) uses the nationally calibrated, binder viscosity-based dynamic modulus predictive model for the design and analysis of asphalt pavements. In this study, this model is assessed for its appropriateness for asphalt-aggregate mixtures typically used in New Mexico. In essence, this study investigates the predictability issue of complex modulus of New Mexico mixes. A total of 54 Superpave mixes with different aggregate gradations, air voids, and binder grades were collected from the mixing plants and from the pavement construction sites. The loose asphalt mixtures were then compacted, …

The Processing And Polarization Reversal Dynamics Of Thin Film Poly(Vinylidene) Fluoride, Noel Mayur Dawson

Nanoscience and Microsystems ETDs

Many ferroelectric devices benefit from the ability to deposit thin ferroelectric layers. Poly(vinylidene) fluoride (PVDF) is the prototypical ferroelectric polymer, but processing of thin film ferroelectric PVDF remains a challenge due to the formation of large voids in the film during traditional thin film processing. The research described in this dissertation starts by investigating the origin of these voids. The cause of these voids is found to be caused by vapor induced phase separation (VIPS). Guided by the thermodynamics of VIPS, a process is then designed to produce void-free ferroelectric PVDF thin films on polar and non-polar substrates. The films …

Layer-By-Layer Assembled Membranes With Immobilized Porins, Sebastián Hernández, Cassandra Porter, Xinyi Zhang, Yinan Wei, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

New and advanced opportunities are arising for the synthesis and functionalization of membranes with selective separation, reactivity, and stimuli-responsive behavior. One such advancement is the integration of bio-based channels in membrane technologies. By a layer-by-layer (LbL) assembly of polyelectrolytes, outer membrane protein F trimers (OmpF) or “porins” from Escherichia coli with central pores ∼2 nm in diameter at their opening and ∼0.7 × 1.1 nm at their constricted region are immobilized within the pores of poly(vinylidene fluoride) microfiltration membranes, in contrast to traditional ruptured lipid bilayer or vesicle processes. These OmpF-membranes demonstrate selective rejection of non-charged organics over ionic solutes, …

Factors Affecting The Evolution Of Inclusion Populations During Steelmaking And Casting Processes, Obinna Adaba, Laura Bartlett, Mingzhi Xu, Ronald J. O'Malley

Materials Science and Engineering Faculty Research & Creative Works

Investigations into the evolution of inclusion populations during ladle processing and continuous casting are reviewed. Details of the steelmaking practices employed in BOP and EAF steelmaking have been observed to have a strong influence on the size distribution, quantity, composition, phases and morphology of the final inclusion population delivered to the caster. Examples of the effects of different processing paths on the evolution of inclusion populations are presented. The importance of preexisting inclusion populations on the formation and removal of new inclusion populations is also reviewed and discussed.

Analysis And Calculation Of Electrostatic Force For Multiple Particles To Demonstrate Particles' Behavior Towards-Equilibrium, Nandine Mitra

Student Theses and Dissertations

Within the field of physics, mathematics & engineering, the aim of modern research is tending towards to depict the accurate model of particular phenomenon with proper explanation. With the help of established theories, it is possible to determine specific modeling for the desired physical observation, leading toward new discoveries. Within the field of theoretical physics, the term of electrostatic force is very common. By Coulomb’s Law, interaction between two charged particles can be described easily in terms of electrostatic force. But to outline interactions between multiple particles towards equilibrium is still a challenge. Here, in our work, we look into …

Heterogeneous Anisotropy Index And Scaling In Multiphase Random Polycrystals, Muhammad Ridwan Murshed

Theses and Dissertations

Under consideration is the finite-size scaling of elastic properties in single and two-phase random polycrystals with individual grains belonging to any crystal class (from cubic to triclinic). These polycrystals are generated by Voronoi tessellations with varying grain sizes and volume fractions. By employing variational principles in elasticity, we introduce the notion of a 'Heterogeneous Anisotropy Index' and investigate its role in the scaling of elastic properties at finite mesoscales. The index turns out to be a function of 43 variables, 21 independent components for each phase and the volume fraction of either phase. Furthermore, the relationship between Heterogeneous Anisotropy Index …

Synthesis And Characterization Of Thermoresponsive Hydrogels Based On N-Isopropylacrylamide Crosslinked With 4,4′-Dihydroxybiphenyl Diacrylate, Shuo Tang, Martha Floy, Rohit Bhandari, Manjula Sunkara, Andrew J. Morris, Thomas D. Dziubla, J. Zach Hilt

Chemical and Materials Engineering Faculty Publications

A novel crosslinker [4,4′-dihydroxybiphenyl diacrylate (44BDA)] was developed, and a series of temperature-responsive hydrogels were synthesized through free radical polymerization of N-isopropylacrylamide (NIPAAm) with 44BDA. The temperature-responsive behavior of the resulting gels was characterized by swelling studies, and the lower critical solution temperature (LCST) of the hydrogels was characterized through differential scanning calorimetry. Increased content of 44BDA led to a decreased swelling ratio and shifted the LCST to lower temperatures. These novel hydrogels also displayed resiliency through multiple swelling–deswelling cycles, and their temperature responsiveness was reversible. The successful synthesis of NIPAAm-based hydrogels crosslinked with 44BDA has led to a …

Energy Potentials Of Briquette Produced From Tannery Solid Waste, Olatunde Ajani Oyelaran, Faralu Muhammed Sani, Olawale Monsur Sanusi, Olusegun Balogun, Adeyinka Okeowo Fagbemigun

Makara Journal of Technology

The vast quantity of waste generated from industries is one of the serious outcomes of unplanned development, resulting into quantum of hazardous organic and inorganic waste generating daily. Proper waste management is a challenging issue that must be addressed adequately. This is, therefore, carried out with a view of assessing the energy and combustion quality of tannery solid waste with a view of converting them into briquettes for cooking, heating and small home industries and reducing the menace caused by tannery waste disposal. The results of the experiments showed that the combustion rate ranged between 0.171 and 0.217 g/min, the …

Indonesia’S Municipal Solid Waste 3r And Waste To Energy Programs, Farizal Farizal, Radityo Aji, Amar Rachman, Nasruddin Nasruddin, Teuku Meurah Indra Mahlia

Makara Journal of Technology

Like most cities in the world, population in Indonesia continues to grow every year. Problems that can arise from this are the increasing amount of municipal solid waste (MSW) production and the growing demand for electricity. To deal with the problems, Indonesian government runs 3R (Reduce, Reuse and Recycle) and WTE (Waste to Energy) Programs simultaneously. 3R program aims to reduce the number of waste, while WTE program aims to generate electricity as an alternative energy source. This study aims to find out the optimal proportion of MSW treated through the 3R and WTE programs. For the purpose, a goal …

Adsorption Of Cu(Ii) Ions In Aqueous Solution Onto Limonia Acidissima Shellbased Activated Carbon: Kinetic And Isotherm Studies, Abrar Muslim, Syahiddin Dahlan Said, Gita Suci Hariati, Siti Fajar Karina, Fauzi Muhammad Djuned, Rizka Mulyawan

Makara Journal of Technology

Adsorption of Cu(II) ions from aqueous solution using activated carbon prepared from Limonia acidissima fruit shell (LAFS-AC) was conducted in batch mode experiments at pH 5 (±0.15), 100 rpm and 1 atm. The effects of contact time, initial Cu(II) ions concentration, KOH concentration, and adsorption temperature on Cu(II) ions adsorption capacity were investigated. Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy analyses were performed to investigate the active site and surface morphology of the LAFS-AC, respectively. The Cu(II) ions adsorption was fitted very well (R2 = 0.94 on average) to the pseudo second-order adsorption kinetic with the adsorption capacity and …

Experimental Study On Automatic Control For Collision Avoidance Of Ships, Daeng Paroka, Muhammad Fahmi Kamil, Andi Haris Muhammad

Makara Journal of Technology

Automatic control system is widely applied to control the ship direction or heading angle in accordance with the decided trajectory. Several methods for improving performance of control system have been developed such as Proportional-Integral-Derivative (PID) control and fuzzy logic based control. Within the last decade, application of automatic control system is not only for ship navigation but also for avoiding collision risk of ships in seaways. This paper discusses the application of automatic control system for avoiding ship collision by free running experiment. Fuzzy logic based control was developed using Mamdani Centroid method to estimate the necessary rudder angle in …

Study On Semiconductor Properties Of Acetylide-Thiourea Fabricated Onto Interdigitated Electrodes (Ides) Platform Towards Application In Gas Sensing Technology, Adibah Izzati Daud, Wan M. Khairul, M. I. N. Isa, Khairul Anuar Abdul Wahid

Makara Journal of Technology

In the past few decades, the unique properties of acetylide and thiourea moieties individually have attracted great attention from researchers in various fields to be developed in numerous applications in advanced materials technology, especially as an active layer in gas sensing devices. The molecular systems of acetylide and thiourea provide a wide range of electronic properties as they possess rigid π-systems in their designated structures. In this study, a derivative of acetylide-thiourea featuring N-(4[4-aminophenyl] ethynyl benzonitrile)-N’-(4-ethyl benzoyl) thiourea (TCN) has been synthesised with the general formula of ArC(O)NHC(S)NHC≡C)Ar adopted the system of D-π-A for the significant development of conductive materials. …

Experimental Study Of The Chimney Height Variation Against Double Pots Biomass Stove Performance, Faisal Faisal, Adi Setiawan, Wusnah Wusnah, Khairil Khairil, Luthfi Luthfi, Mona Fajriana

Makara Journal of Technology

This research aims to get optimal chimneys height of double pots biomass stove. Optimal chimneys height needs to provide best performance of the stove. Experimental study was done by varied the chimney heights. Water boiling test as the standard method was used to obtained stove performance for each chimney height variation. The results showed that best performance stove was the one with 1.65 cm chimney height, with thermal efficiency at 37.66%.

Assessment On Heck-Immine Derivatives As Organic Semiconductor Materials, Rafizah Rahamathullah, Lim Keemi, Wan M. Khairul

Makara Journal of Technology

This paper reports the synthetic, characterization and theoretical evaluation of new class of hybrid Heck-immine system involving mixed moieties of vinylene (C=C) and azomethines (CH=N) which has been successfully integrated into an addition of organic semiconducting materials. The assessment of 4-[(hexyloxyphenyl)methylene]amino)-4’-chloro-stilbene (HEXCS) based on Donor (D)-π-Acceptor (A) was evaluated as active semiconductor material candidates via several spectroscopic and analytical techniques. In turn, the investigation of its potential as dopant system in conductive film was successfully deposited on indium tin oxide (ITO) coated substrate via spin coating method. The relationship between electronic and optical properties, chemical modelling at molecular interactions and …

Innovation Of Hydrocarbon Investigation Using Audio-Magnetotelluric In Cepu Field, Indonesia, Iqbal Fauzi Aditama, Widodo Widodo

Makara Journal of Technology

An audio-magnetotelluric (AMT) survey has been performed at Cepu oil field located in Indonesia. The objective of this research is to detect resistivity structures of this important hydrocarbon rock. This research can be classified as an innovation in application of the AMT method for hydrocarbon exploration. The lack of seismic resolution has been provided by the AMT method, especially in the location of sub-basalt and sub-salt plays. In additional, the cost of AMT survey is quite low compared to seismic. The forward modelling is included in this research to understand the measurement data response from a mathematical model. In the …

Investigation Of The Durability Of Sisal Fiber/Pla Biocomposite Through Evaluation Of Biodegradability By Means Of Microbial Growth, T Kittikorn, S Kongsuwan, R Malakul

Journal of Metals, Materials and Minerals

The aim of this work was to investigate the microbial biodegradation of 3-(trimethoxysilyl) propyl methacrylate (TPM) modified (silanized) sisal fibres/PLA biocomposites by Aspergillus niger. The modification of the sisal fibres performed excellently, improving hydrophobicity as well as mechanical properties. Compared to the unmodified sisal/PLA biocomposite, it produced superior interfacial adhesion between the fibres and the PLA matrix. In addition, silanization also increased the crystal size and crystallinity in the biocomposite, which decreased thermal decomposition to an observed maximal activation energy of 213 kJ/mol. This indicated the stability of silanized sisal biocomposite in resisting degradation. After the microbial growth test, despite …

Extended Lamer Synthesis Of Cobalt Doped Ferrite, Benjamin D. Fellows, Sarah Sandler, Jacob Livingston, Kristin Fuller, Lotanna Nwandu, Sarah Timmis, Kayla A. Lantz, Morgan Stefik, O. Thompson Mefford

Publications

Nonstoichiometric cobalt ferrite nanoparticles have drawn interest in magnetically mediated energy delivery due to their high magnetocrystalline anisotropy and their high peak loss frequency. The use of an extended LaMer synthesis allows for size control of the doped particles up to a threshold core diameter of 18 nm. Above this diameter, particles become unstable and drop out of suspension, allowing for further nucleation events to occur. This leads to a cyclic nucleation, growth, and destabilization regime seen during the course of the reaction. Using the size control of the extended LaMer synthesis technique, we examine the specific absorption rate (SAR) …

Investigation Of Thermophysical Properties Of Enhanced Molten Salt Nanofluids For Thermal Energy Storage (Tes) In Concentrated Solar Power (Csp) Systems, Joohyun Seo

Material Science and Engineering Dissertations - Archive

Concentrated solar power (CSP) technologies have a great economical and technical potential for energy production in future. Its incorporation with thermal energy storage (TES) overcomes one of the biggest challenges in most renewable energy technologies, the intermittency of energy supply by natural resources. TES with 15-hour storage capacity is already commercialized to operate a CSP plant for 24 hours a day. When the sunlight is concentrated by mirrors into a small focal point, a heat transfer fluid (HTF) transfers the collected heat to a turbine or an engine to produce electricity and any surplus heat to a TES unit for …

Development Of Plasma Functionalized Nano-Additives For Oils And Study Of Their Tribological Properties, Vinay Sharma

Material Science and Engineering Dissertations - Archive

Lubricants used in motor engines contain various chemical species to help enhance energy efficiency and provide increased longevity. Unfortunately, at the same time, these additives become a source of catalytic poisoning, thus increasing emissions from the tailpipe. With growing concern for the negative impacts of human activities on the environment, regulatory bodies for the automobile lubrication industry have set up strict guidelines for chemical compositions of their end products, including engine oils. This research work is a step towards development of a new class of lubricant additives, which are less harmful to the environment and, simultaneously, also reduce friction and …

Artificial Olfactory System For Multi-Component Analysis Of Gas Mixtures., Alexander Aleksandrovich Larin

Electronic Theses and Dissertations

Gas analysis is an important part of our world and gas sensing technology is becoming more essential for various aspects of our life. A novel approach for gas mixture analysis by using portable gas chromatography in combination with an array of highly integrated and selective metal oxide (MOX) sensors has been studied. We developed a system with small size (7 x 13 x 16 inches), low power consumption (~10 W) and absence of special carrier gases designed for portable field analysis (assuming apriori calibration). Low ppb and even sub-ppb level of detection for some VOCs was achieved during the analysis …

Usa Boccia Ball Ramp For Athletes With Quadriplegia, Alissa A. Koukourikos, Matthew Lee, Nathan Bernards

Mechanical Engineering

In this report, the design process in creating an assistive device for Boccia Classification 3 (BC3) players is outlined. The initial research steps, including research into the rules of the game, capabilities of the players, and existing products is documented to show where ideas for the product stemmed from. This transitions into requirements that the sponsor requested, and preliminary designs and ideas for the product. Finally, this report explains the details of the final design, which has been analyzed for safety, ease of use, and ability to function under different conditions. The processes of manufacturing and testing will also be …

Antibacterial Activity Of Zno Nanoparticles On Silica Thin Film For Wastewater Treatment, S Chanrawangyot, S Rattanachan, A Watcharenwong, T Fangsuwannarak

Journal of Metals, Materials and Minerals

Zinc Oxide nanoparticles on silica matrix thin films were prepared by the Sol-gel method and dip coating on ceramic tiles. In this study, EC (Ethyl cellulose) and TP (alpha-terpineol) used as a binder and a solvent in Sol-gel method, respectively, were studied on the characteristics of thin films. The thin films were dried and calcined at the temperature of 500, 600˚C soaking 30 minutes with the heating rate of 1˚C/minutes. The result of Glancing X-Ray Diffraction showed that thin films were ZnO phase on the amorphous phase of silica matrix. Scanning electron microscope showed the ZnO nanoparticles dispersed on thin …

Properties Of Natural Rubber Latex Filled With Bacterial Cellulose Produced From Pineapple Peels, T Saowapark, E Chaichana, A Jaturapiree

Journal of Metals, Materials and Minerals

Bacterial cellulose (BC) is natural biopolymers with unique properties such as high purity and high tensile strength. These properties considerably support for use as filler in rubber applications. In this research, BC was produced from fermentation by Acetobacter xylinum. Additionally, pineapple peels (agricultural waste) were evaluated for carbon sources in BC's production process. Natural rubber latex (NRL) compound was then incorporated BC with various loadings of 0, 5, 10 and 15 phr (parts per hundred of rubber) for enhancement properties of NRL. Furthermore, NRL filled with BC (NRL-BC) compounds were prevulcanized at 70°C for 2 hours and then NRL-BC sheets …

Physical And Optical Properties Of 20cao-(80-X)B2o3-Xzno Glass System, N Jearnkulprasert, O Chaemlek, N Wantana, J Kaewkhao

Journal of Metals, Materials and Minerals

The 20CaO-(80-x)B2O3-xZnO glasses were prepared by melt quenching technique (where x=0, 5, 15 and 20 mol%) in order to study in the physical and optical properties. These glass compositions were heated to 1200 ºC for 3 hours and annealed at 500ºC for 3 hours. Clear glass samples were obtained from these compositions. The density, molar volume, refractive index, optical spectra (in the wavelength of 190-1100 nm), optical band gap, optical basicity and polarizability of glass samples have been investigated in this work.

Optical Flow Method For Blood Flow Velocimetry Based On Digital X-Ray Subtraction Angiography: A Brief Review, Zifeng Yang

Mechanical and Materials Engineering Faculty Publications

Detailed blood flow information has been recognized as the key information for diagnosis of vascular diseases, such as vascular stenosis and aneurysms. Optical flow method (OFM) is an emergent technique as a tool to analyze the digital x-ray subtraction angiographic images of blood vessels to obtain the detailed blood flow distribution in vascular systems. A brief review isconstructed to discuss the status, applicability, accuracy and future direction of the optical flow technique in the physical study of vascular flow.

Investigation On Ti6al4v-V-Cr-Fe-Ss316 Multi-Layers Metallic Structure Fabricated By Laser 3d Printing, Wei Li, Frank W. Liou, Joseph William Newkirk, Karen M. Brown Taminger, William J. Seufzer

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Joining titanium alloy and stainless steel is becoming an urgent need since their outstanding mechanical properties can be utilized integratedly. However, direct fusion joining of Ti6Al4V to SS316 can cause brittle Ti-Fe intermetallics which compromise join bonds’ mechanical properties. In this research, Laser 3D Printing was applied to explore a new Ti6Al4V to SS316 multi-metallic structure. A novel filler transition route was introduced (Ti6Al4V → V → Cr → Fe → SS316) to avoid the Ti-Fe intermetallics. Two experimental cases were performed for comparison to evaluate this novel route’s effect. In the first case, SS316 layer was directly deposited on …