Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 4411 - 4440 of 16790

Full-Text Articles in Materials Science and Engineering

Mass Loading Optimization For Ethylene Glycol Oxidation At Different Potential Regions, Sheng-Nan Sun, Zhi-Chuan Xu Feb 2022

Mass Loading Optimization For Ethylene Glycol Oxidation At Different Potential Regions, Sheng-Nan Sun, Zhi-Chuan Xu

Journal of Electrochemistry

Designing and fabricating the electrocatalysts is attracting more and more attention in recent years due to a global interest in developing techniques for electrochemical energy conversion and storage, as well as elelectro-synthesis of valuable chemicals. The activity is one of the key performance parameters for electrocatalysts, while the observed activity can be affected by mass loading of electrocatalysts. Here, we take cobalt oxide (Co3O4)/graphite paper electrode (Co3O4/GPE) as a model electrode to demon-strate how the mass loading of Co3O4 catalyst influences ethylene glycol (EG) oxidation in alkaline (KOH) by …

Go to article

Structural Degradation Of Ni-Rich Layered Oxide Cathode For Li-Ion Batteries, Jia-Yi Wang, Sheng-Nan Guo, Xin Wang, Lin Gu, Dong Su Feb 2022

Structural Degradation Of Ni-Rich Layered Oxide Cathode For Li-Ion Batteries, Jia-Yi Wang, Sheng-Nan Guo, Xin Wang, Lin Gu, Dong Su

Journal of Electrochemistry

Nickel(Ni)-rich layered oxide has been regarded as one of the most important cathode materials for the lithium-ion batteries because of its low cost and high energy density. However, the concerns in safety and durability of this compound are still challenging for its further development. On this account, the in-depth understanding in the structural factors determining its capacity attenuation is essential. In this review, we summarize the recent advances on the degradation mechanisms of Ni-rich layered oxide cathode. Progresses in the structure evolution of Ni-rich oxide are carefully combed in terms of inner evolution, surface evolution, and the property under thermal …

Go to article

Influence Of Hydrophobicity On Excitonic Coupling In Dna-Templated Indolenine Squaraine Dye Aggregates, Olga A. Mass, Christopher K. Wilson, German Barcenas, Lan Li, Bernard Yurke, William B. Knowlton, Ryan D. Pensack, Jeunghoon Lee Feb 2022

Influence Of Hydrophobicity On Excitonic Coupling In Dna-Templated Indolenine Squaraine Dye Aggregates, Olga A. Mass, Christopher K. Wilson, German Barcenas, Lan Li, Bernard Yurke, William B. Knowlton, Ryan D. Pensack, Jeunghoon Lee

Materials Science and Engineering Faculty Publications and Presentations

Control over the strength of excitonic coupling in molecular dye aggregates is a substantial factor for the development of technologies such as light harvesting, optoelectronics, and quantum computing. According to the molecular exciton model, the strength of excitonic coupling is inversely proportional to the distance between dyes. Covalent DNA templating was proved to be a versatile tool to control dye spacing on a subnanometer scale. To further expand our ability to control photophysical properties of excitons, here, we investigated the influence of dye hydrophobicity on the strength of excitonic coupling in squaraine aggregates covalently templated by DNA Holliday Junction (DNA …

Go to article

Dissolution Amplification By Resonance And Cavitational Stimulation At Ultrasonic And Megasonic Frequencies, Ross A. Arnold, Shiqi Dong, Longwen Tang, Dale Prentice, Marie Collin, Juan Carlos Vega-Vila, Amaya Hernandez, Erika Callagon La Plante, Kirk Ellison, Aditya Kumar, Samanvaya Srivastava, Mathieu Bauchy, Dante Simonetti, Gaurav N. Sant Feb 2022

Dissolution Amplification By Resonance And Cavitational Stimulation At Ultrasonic And Megasonic Frequencies, Ross A. Arnold, Shiqi Dong, Longwen Tang, Dale Prentice, Marie Collin, Juan Carlos Vega-Vila, Amaya Hernandez, Erika Callagon La Plante, Kirk Ellison, Aditya Kumar, Samanvaya Srivastava, Mathieu Bauchy, Dante Simonetti, Gaurav N. Sant

Materials Science and Engineering Faculty Research & Creative Works

Acoustic stimulation offers a green pathway for the extraction of valuable elements such as Si, Ca, and Mg via solubilization of minerals and industrial waste materials. Prior studies have focused on the use of ultrasonic frequencies (20-40 kHz) to stimulate dissolution, but mega sonic frequencies (≥1 MHz) offer benefits such as matching of the resonance frequencies of solute particles and an increased frequency of cavitation events. Here, based on dissolution tests of a series of minerals, it is found that dissolution under resonance conditions produced dissolution enhancements between 4x-to-6x in Si-rich materials (obsidian, albite, and quartz). Cavitational collapse induced by …

Go to article

Effect Of Processing Parameters And Build Orientation On Microstructure And Performance Of Aisi Stainless Steel 304l Made With Selective Laser Melting Under Different Strain Rates, Tan Pan, Xinchang Zhang, Aaron Flood, Sreekar Karnati, Wei Li, Joseph William Newkirk, Frank W. Liou Feb 2022

Effect Of Processing Parameters And Build Orientation On Microstructure And Performance Of Aisi Stainless Steel 304l Made With Selective Laser Melting Under Different Strain Rates, Tan Pan, Xinchang Zhang, Aaron Flood, Sreekar Karnati, Wei Li, Joseph William Newkirk, Frank W. Liou

Materials Science and Engineering Faculty Research & Creative Works

Selective laser melting (SLM) process allows greater geometry flexibility; therefore, it has become more widespread in its deployment in the industry for fabricating metal alloys. However, a material characterization study is needed in order to understand better the correlation between the process, microstructure, and performance. In the current study, the raw SLM fabricated AISI stainless steel 304 L was fabricated with different processing parameters and build orientations (horizontal, inclined, and vertical). The tensile behavior was evaluated under different strain rates (0.0001/s, 0.001/s, 0.01/s, and 0.1/s) and then compared to commercial cold-rolled and annealed counterparts. Grain structures, tensile strength, elongation-to-failure, strain …

Go to article

The Effect Of Sodium Polymethacrylate On The Rheology Of The Positive Paste And Performance Of The Lead-Acid Battery, Julian Kosacki, Dimitri Feys, Fatih Dogan Feb 2022

The Effect Of Sodium Polymethacrylate On The Rheology Of The Positive Paste And Performance Of The Lead-Acid Battery, Julian Kosacki, Dimitri Feys, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Go to article

Detonation Synthesis Of Nanoscale Silicon Carbide From Elemental Silicon, Martin J. Langenderfer, Yue Zhou, Jeremy Lee Watts, William Fahrenholtz, Catherine E. Johnson Feb 2022

Detonation Synthesis Of Nanoscale Silicon Carbide From Elemental Silicon, Martin J. Langenderfer, Yue Zhou, Jeremy Lee Watts, William Fahrenholtz, Catherine E. Johnson

Materials Science and Engineering Faculty Research & Creative Works

Direct reaction of precursors with the products of detonation remains an underexplored area in the ever-growing body of detonation synthesis literature. This study demonstrated the synthesis of silicon carbide during detonation by reaction of elemental silicon with carbon products formed from detonation of RDX/TNT mixtures. Continuum scale simulation of the detonation showed that energy transfer by the detonation wave was completed within 2–9 μs depending on location of measurement within the detonating explosive charge. The simulated environment in the detonation product flow beyond the Chapman-Jouguet condition where pressure approaches 27 GPa and temperatures reach 3300 K was thermodynamically suitable for …

Go to article

Control Of High-Temperature Static And Transient Thermomechanical Behavior Of Simo Ductile Iron By Al Alloying, Semen Naumovich Lekakh, Catherine E. Johnson, L. Godlewski, Mei Li Feb 2022

Control Of High-Temperature Static And Transient Thermomechanical Behavior Of Simo Ductile Iron By Al Alloying, Semen Naumovich Lekakh, Catherine E. Johnson, L. Godlewski, Mei Li

Materials Science and Engineering Faculty Research & Creative Works

Silicon and molybdenum (SiMo) ductile iron is commonly used for exhaust manifolds because these components experience thermal cycling in oxidizing environment, which requires resistance to fatigue during transient thermomechanical loads. Previous studies have demonstrated that alloying elements, such as Al, to SiMo ductile iron reduces the amount of surface degradation during static high-temperature exposure. However, deterioration of sphericity of the graphite nodules and a decrease in ductility could affect the tendency of cracking during thermal cycling. In this article, the effect of Al alloying on static and transient thermomechanical behavior of SiMo ductile iron was investigated to optimize the amount …

Go to article

Strategy For Conjugating Oligopeptides To Mesoporous Silica Nanoparticles Using Diazirine-Based Heterobifunctional Linkers, Md Arif Khan, Ramy W. Ghanim, Maelyn R. Kiser, Mahsa Moradipour, Dennis T. Rogers, John M. Littleton, Luke H. Bradley, Bert C. Lynn, Stephen E. Rankin, Barbara L. Knutson Feb 2022

Strategy For Conjugating Oligopeptides To Mesoporous Silica Nanoparticles Using Diazirine-Based Heterobifunctional Linkers, Md Arif Khan, Ramy W. Ghanim, Maelyn R. Kiser, Mahsa Moradipour, Dennis T. Rogers, John M. Littleton, Luke H. Bradley, Bert C. Lynn, Stephen E. Rankin, Barbara L. Knutson

Chemical and Materials Engineering Faculty Publications

Successful strategies for the attachment of oligopeptides to mesoporous silica with pores large enough to load biomolecules should utilize the high surface area of pores to provide an accessible, protective environment. A two-step oligopeptide functionalization strategy is examined here using diazirine-based heterobifunctional linkers. Mesoporous silica nanoparticles (MSNPs) with average pore diameter of ~8 nm and surface area of ~730 m2/g were synthesized and amine-functionalized. Tetrapeptides Gly-Gly-Gly-Gly (GGGG) and Arg-Ser-Ser-Val (RSSV), and a peptide comprised of four copies of RSSV (4RSSV), were covalently attached via their N-terminus to the amine groups on the particle surface by a heterobifunctional linker, …

Go to article

Special Topic On Materials And Devices For 5g Electronics, Nathan D. Orloff, Rick Ubic, Michael Lanagan Feb 2022

Special Topic On Materials And Devices For 5g Electronics, Nathan D. Orloff, Rick Ubic, Michael Lanagan

Materials Science and Engineering Faculty Publications and Presentations

Next generation communications are inspiring entirely new applications in education, healthcare, and transportation. These applications are only possible because of improvements in latency, data rates, and connectivity in the latest generation. Behind these improvements are new materials and devices that operate at much higher frequencies than ever before, a trend that is likely to continue.

Go to article

Study Of Various Quality Characteristics Of Polyester Fibers Obtained On The Basis Of Primary And Secondary Polyethylene Terephthalate, Samida Ernzarova, Asror Juraev, Muzaffar Alimukhamedov, Farhod Magrupov Feb 2022

Study Of Various Quality Characteristics Of Polyester Fibers Obtained On The Basis Of Primary And Secondary Polyethylene Terephthalate, Samida Ernzarova, Asror Juraev, Muzaffar Alimukhamedov, Farhod Magrupov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of study is comprehensive determination of various quality characteristics of polyester fibers obtained on the basis of primary and secondary polyethylene terephthalate. The analysis of the raw material base of pre-oriented yarns (POY) threads has been carried out. The technological, physicomechanical properties, as well as the structure of the primary and secondary polyethylene terephthalate used in the production of the threads have been studied. The structure and properties of polyethylene terephthalate changed: the properties were worse, the structure were amorphous, the molecular weight decreased. The structure of recycled polyethylene terephthalate changed as a result of technological conversions in …

Go to article

Мulti-Layer Fibrous Material Based On Textile Waste, Sevara Alimkhanova, Nodir Mirzaev, Adham Rafikov Feb 2022

Мulti-Layer Fibrous Material Based On Textile Waste, Sevara Alimkhanova, Nodir Mirzaev, Adham Rafikov

CHEMISTRY AND CHEMICAL ENGINEERING

At the textile and sewing and knitting enterprises of the Republic of Uzbekistan, the number of which increases every year, a sufficient amount of technological waste is accumulated, which formed in the processes of sizing yarn, starting and setting up equipment, designing and sewing products. Meanwhile, there is a shortage of warm, comfortable, light, soft lining materials for clothes and shoes based on natural raw materials. With the purpose of rational use of textile waste - shredded, disheveled scraps of fabric and knitwear, a multilayer nonwoven material for details of clothing and footwear has been obtained. The material formed by …

Go to article

Spectral Features And Hydrogen Bond Structure Of Aqueous Solutions Of Ethanol, Dilbar Bozorova, Shukur Gofurov, Mavlonbek Ziyayev, Abdulmutallib Kokhkharov, Oksana Ismailova Feb 2022

Spectral Features And Hydrogen Bond Structure Of Aqueous Solutions Of Ethanol, Dilbar Bozorova, Shukur Gofurov, Mavlonbek Ziyayev, Abdulmutallib Kokhkharov, Oksana Ismailova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is develop an approach that makes it possible to study the spectral properties and structure of intermolecular hydrogen bonds in aqueous solutions of ethanol formed in systems whose existence in a gaseous medium or an isolated state is practically impossible. This approach bases on the combined use of infrared spectroscopy and molecular dynamics (MD) methods. An analysis give the structural reorganization of water molecules depending on the concentration of ethanol alcohol. It has been shown that the method of molecular dynamics with classical force fields makes it possible to explicitly take into account the molecules …

Go to article

Determination Of The Stability Of Complex Compounds Of Copper (Ii), Zinc (Ii), Cadmium (Ii) And Silver (I) With Covalently Immobilized Sulfur Contain Ligands, Sherzod Kasimov, Khayit Turaev, Abdulakhat Jalilov, Farkhod Narmuratov, Zulkhumor Jumayeva Feb 2022

Determination Of The Stability Of Complex Compounds Of Copper (Ii), Zinc (Ii), Cadmium (Ii) And Silver (I) With Covalently Immobilized Sulfur Contain Ligands, Sherzod Kasimov, Khayit Turaev, Abdulakhat Jalilov, Farkhod Narmuratov, Zulkhumor Jumayeva

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is to determine the stability of the obtained coordination compounds of some d-metals with covalent immobilized sulfur-containing ligands. To achieve this goal, coordination compounds of copper (II), zinc (II), cadmium (II) and silver (I) ions with covalent immobilized sulfur-containing ligands - О,О-di- (2-aminoethyl) -dithiophosphate potassium - polyester matrix (KD2AEDTP-PEM), O,O-di- (2-aminoethyl) -dithiophosphate potassium - carbamide-formaldehyde matrix (KD2AEDTP-KFM). Studies were carried out to determine the acid-base properties of covalent-immobilized sulfur-containing ligands - KD2AEDTP-PEM, KD2AEDTP-KFM and the concentration stability of the obtained coordination compounds with ions of copper (II), zinc (II), cadmium (II), and silver (I). Based …

Go to article

Synthesis And Spectroscopic Study Of Complex Compounds Mn(Ii), Co(Ii), Cu(Ii) And Zn With 5-Amino-2-Mercaptobenzimidazole, Lobar Gapurova, Dilnoza Rakhmonova, Shakhnoza Kadirova Feb 2022

Synthesis And Spectroscopic Study Of Complex Compounds Mn(Ii), Co(Ii), Cu(Ii) And Zn With 5-Amino-2-Mercaptobenzimidazole, Lobar Gapurova, Dilnoza Rakhmonova, Shakhnoza Kadirova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to study the effect of the nature of electron-donor and electron-withdrawing substituents in the molecules of heterocyclic ligands, the nature of acidoligands and transition metal ions on the properties of the synthesized coordination compounds. A method for the synthesis of new complex compounds of Mn (II), Cо (II), Cu (II) and Zn with 5-amino-2-mercaptobenzimidazole has been developed and the composition and structure of the synthesized complex compounds have been studied using modern physicochemical methods, such as elemental, thermogravimetric, X-ray phase analysis and IR spectroscopy. Coordination competing donor centers, electronic and geometric structures of the …

Go to article

Resistance Of Polystyrol Concrete To Dynamic Impact Loads, Natalya Dubovitskaya, Zamira Mukhamedbaeva, Abduvali Mukhamedbaev Feb 2022

Resistance Of Polystyrol Concrete To Dynamic Impact Loads, Natalya Dubovitskaya, Zamira Mukhamedbaeva, Abduvali Mukhamedbaev

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to increase the resistance of polystyrene concrete obtained from recycled polystyrene to dynamic shock loads. The issues of resistance of polystyrene concrete to compression forces with increasing load are considered. It was found that in terms of impact resistance, polystyrene concrete can be classified as a viscous material capable of absorbing high energy of shock loads. It has been determined that when Na2SO4 is introduced as a hardening accelerator, polystyrene concrete samples can absorb an impact energy of more than 178.5 J.

Go to article

Features Of The Formation Of The Coating Structure On Titanium-Based Alloys, Uchkun Rakhimov, Nasiba Abduraimova, Yulbarskhon Mansurov Feb 2022

Features Of The Formation Of The Coating Structure On Titanium-Based Alloys, Uchkun Rakhimov, Nasiba Abduraimova, Yulbarskhon Mansurov

CHEMISTRY AND CHEMICAL ENGINEERING

Previously shown that coatings formed on titanium by plasma electrolytic oxidation (PEO) in an electrolyte with zirconium sulfate Zr(SO4)2 consisted of ZrO2 and TiO2 oxides, their surface layer is enriched with zirconium, they have good protective properties in chlorine-containing media. The resulting layers have a fairly regular distribution of relatively small pores, with a diameter of about 1 μm or less, on the surface. The composition and structure of PEO layers depend on both the composition of the electrolyte and the modes of formation. It is of scientific and practical interest to elucidate the effect …

Go to article

Flexible Planar Metamaterials With Tunable Poisson’S Ratios, Nicholas Pagliocca, Kazi Zahir Uddin, Ibnaj Anamika Anni, Chen Shen, George Youssef, Behrad Koohbor Feb 2022

Flexible Planar Metamaterials With Tunable Poisson’S Ratios, Nicholas Pagliocca, Kazi Zahir Uddin, Ibnaj Anamika Anni, Chen Shen, George Youssef, Behrad Koohbor

Henry M. Rowan College of Engineering Departmental Research

This research reports on the design, fabrication, and multiscale mechanical characterization of flexible, planar mechanical metamaterials with tailorable mechanical properties. The tunable mechanical behavior of the structures is realized through the introduction of orthogonal perforations with different geometric features. Various configurations of the perforations lead to a wide range of Poisson’s ratios (from −0.8 to 0.4), load-bearing properties, and energy absorption capacities. The correlations between the configuration of the perforations and the auxetic response of the structures are highlighted through computational and experimental characterizations performed at multiple length scales. It is demonstrated that the local in-plane rotation of the solid …

Go to article

Computational Investigation Of The Post-Yielding Behavior Of 3d-Printed Polymer Lattice Structures, Abdalsalam Fadeel, Hasanain Abdulhadi, Golam Newaz, Raghavan Srinivasan, Ahsan Mian Feb 2022

Computational Investigation Of The Post-Yielding Behavior Of 3d-Printed Polymer Lattice Structures, Abdalsalam Fadeel, Hasanain Abdulhadi, Golam Newaz, Raghavan Srinivasan, Ahsan Mian

Mechanical and Materials Engineering Faculty Publications

Sandwich structures are widely used due to their light weight, high specific strength, and high specific energy absorption. Three-dimensional (3D) printing has recently been explored for creating the lattice cores of these sandwich structures. Experimental evaluation of the mechanical response of lattice cell structures (LCSs) is expensive in time and materials. As such, the finite element analysis (FEA) can be used to predict the mechanical behavior of LCSs with many different design variations more economically. Though there have been several reports on the use of FEA to develop models for predicting the post-yielding stages of 3D-printed LCSs, they are still …

Go to article

Implementation Of Multiscale Mechanisms In Finite Element Analysis Of Active Composite Structures, Amany G. Micheal Prof., Yehia Bahei El Din Prof. Feb 2022

Implementation Of Multiscale Mechanisms In Finite Element Analysis Of Active Composite Structures, Amany G. Micheal Prof., Yehia Bahei El Din Prof.

Centre for Advanced Materials

Composite structures reinforced with electrically active filaments are modeled with the finite element method while the underlying thermo-electromechanical coupling phenomena and damage are taken into consideration. At the outset, structural analysis is performed with a general-purpose finite element code and a special material routine, which propagates local phenomena to the overall scale is utilized. The material routine implements an interactive, multiscale analysis, which provides seamless integration of the mechanics at the composite’s micro, macro, and structural length scales. The interface between the multiscale material routine and the finite element code is made through nonmechanical strains caused by damage, and piezo/pyro-electric …

Go to article

Synergic Antitumor Effect Of Photodynamic Therapy And Chemotherapy Mediated By Nano Drug Delivery Systems, Mozhgan Aghajanzadeh, Mostafa Zamani, Fereshteh Rajabi Kouchi, Josh Eixenberger, Dorsa Shirini, David Estrada, Farhad Shirini Feb 2022

Synergic Antitumor Effect Of Photodynamic Therapy And Chemotherapy Mediated By Nano Drug Delivery Systems, Mozhgan Aghajanzadeh, Mostafa Zamani, Fereshteh Rajabi Kouchi, Josh Eixenberger, Dorsa Shirini, David Estrada, Farhad Shirini

Materials Science and Engineering Faculty Publications and Presentations

This review provides a summary of recent progress in the development of different nano-platforms for the efficient synergistic effect between photodynamic therapy and chemotherapy. In particular, this review focuses on various methods in which photosensitizers and chemotherapeutic agents are co-delivered to the targeted tumor site. In many cases, the photosensitizers act as drug carriers, but this review, also covers different types of appropriate nanocarriers that aid in the delivery of photosensitizers to the tumor site. These nanocarriers include transition metal, silica and graphene-based materials, liposomes, dendrimers, polymers, metal–organic frameworks, nano emulsions, and biologically derived nanocarriers. Many studies have demonstrated various …

Go to article

Thermoforming Process Effects On Structural Performance Of Carbon Fiber Reinforced Thermoplastic Composite Parts Through A Manufacturing To Response Pathway, Madhura Limaye, Sai Aditya Pradeep, Anmol Kothari, Sushil Savla, Akshat Agha, Srikanth Pilla, Gang Li Feb 2022

Thermoforming Process Effects On Structural Performance Of Carbon Fiber Reinforced Thermoplastic Composite Parts Through A Manufacturing To Response Pathway, Madhura Limaye, Sai Aditya Pradeep, Anmol Kothari, Sushil Savla, Akshat Agha, Srikanth Pilla, Gang Li

Publications

Thermoforming process of thermoplastic-based continuous CFRP's offer a major advantage in reducing cycle times for large-scale productions, but it can also have a significant impact on the structural performance of the parts by inducing undesirable effects. This necessitates the development of an optimal manufacturing process that minimizes the introduction of undesirable factors in the structure and thereby achieves the targeted mechanical performance. This can be done by first establishing a relationship between the manufacturing process and mechanical performance and successively optimizing it to achieve the desired targets. The current study focuses on the former part, where a manufacturing-to-response (MTR) pathway …

Go to article

Facile One-Step Hydrothermal Method For Nico2s4/Rgo Nanocomposite Synthesis For Efficient Hybrid Supercapacitor Electrodes, Ahmed Mysara, Sayed Y. Attia, Fouad I. El-Hosiny, M A. Sadek, Saad G. Mohamed, M M. Rashad Feb 2022

Facile One-Step Hydrothermal Method For Nico2s4/Rgo Nanocomposite Synthesis For Efficient Hybrid Supercapacitor Electrodes, Ahmed Mysara, Sayed Y. Attia, Fouad I. El-Hosiny, M A. Sadek, Saad G. Mohamed, M M. Rashad

Nanotechnology Research Centre

Spinel nickel-cobalt sulfide (NiCo2S4) supported on reduced graphene oxide (rGO) was fabricated through a facile one-step hydrothermal method for energy storage applications. The distribution of the NiCo2S4 nanoparticles on the rGO surface was found to improve the supercapacitive performance of the assembled device. The NiCo2S4/rGO nanocomposite exhibits outstanding electrochemical behavior with a capacity (C)/specific capacitance (Cs) of 536 C g−1/1072 F g−1 at a current density of 1 A g−1. To further investigate the electrochemical behavior of the NiCo2S4/rGO nanocomposite, a hybrid supercapacitor (HSC) was constructed utilizing a NiCo2S4/rGO positive electrode and an activated carbon …

Go to article

Nodule Formation On Copper Electrodeposits In The Rotating Cylinder Hull Cell, Joseph Bauer, Michael S. Moats Feb 2022

Nodule Formation On Copper Electrodeposits In The Rotating Cylinder Hull Cell, Joseph Bauer, Michael S. Moats

Materials Science and Engineering Faculty Research & Creative Works

Nodulation formation during the electrolytic production of high-purity copper can lead to impurity entrapment and/or increased energy consumption. The rotating cylinder Hull cell (RCHC) was used to study copper nodule formation under mass transport conditions similar to industrial electrolytic copper production. The main advantage of the RCHC is that a wide range of current densities can be produced in a single experiment with well-defined mass transfer conditions. Visible nodule formation was observed at current densities greater than 250 A/m2, which is an iavg/iL ratio of 0.30 for a simulated conventional electrowinning cell. Statistical analysis was also performed using the Weibull …

Go to article

Design And Fabrication Of Nanostructured Electrodes For Complementary Electrochemical And Photoelectrochemical Water Splitting, Kholoud El Sayed Abousalem Jan 2022

Design And Fabrication Of Nanostructured Electrodes For Complementary Electrochemical And Photoelectrochemical Water Splitting, Kholoud El Sayed Abousalem

Theses and Dissertations

Designing highly active, durable, and nonprecious electrodes for overall water splitting is of urgent scientific importance to realize sustainable hydrogen production. Accordingly, the need to search efficient energy production systems is of crucial necessity. In this thesis, two various systems for sustainable hydrogen production have been reported using electrochemical and photoelectrochemical pathways. In the first part of the thesis, electrochemical water splitting involving both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) has been established. To this end, an innovative approach is demonstrated to synthesize flower-like 3D homogenous trimetallic Mn, Ni, Co phosphide catalysts directly on nickel foam via …

Go to article

The Integrated Scheduling Of Flexible Manufacturing Systems Using Petri Net Modeling And Heuristic Searching, Mohammed Mohammed Magdy Mohammed Jan 2022

The Integrated Scheduling Of Flexible Manufacturing Systems Using Petri Net Modeling And Heuristic Searching, Mohammed Mohammed Magdy Mohammed

Archived Theses and Dissertations

No abstract provided.

Go to article

A Flexible Enzymeless Glucose Sensor Via Electrodepositing 3d Flower-Like Cos Onto Self-Supporting Graphene Tape Electrode, Jiang Li, Zuo-Peng Li, Yun-Feng Bai, Su-Xing Luo, Yong Guo, Ya-Yan Bao, Rong Li, Hai-Yan Liu, Feng Feng Jan 2022

A Flexible Enzymeless Glucose Sensor Via Electrodepositing 3d Flower-Like Cos Onto Self-Supporting Graphene Tape Electrode, Jiang Li, Zuo-Peng Li, Yun-Feng Bai, Su-Xing Luo, Yong Guo, Ya-Yan Bao, Rong Li, Hai-Yan Liu, Feng Feng

Journal of Electrochemistry

Three-dimensional (3D) nanostructural Flower-like cobalt sulfide (CoS) on flexible self-supporting graphene tape electrode (GTE) with remarkably electrocatalytic activity toward glucose was successfully prepared by electrodeposition. Structural characterizations revealed that the electrodeposited CoS was highly dispersed on GTE as an active material. The fabricated binder-free and self-standing CoS/GTE shows a good linear response in the range of 0.025 ~ 1.0 mmol·L-1, reaching a high glucose sensitivity value of 323.3 μA·(mmol·L -1)-1·cm-2 and a low detection limit of 8.5 μmol·L -1 (S/N = 3). Moreover, the as-prepared sensor was well applied for glucose …

Go to article

Advances Of Phosphide Promoter Assisted Pt Based Catalyst For Electrooxidation Of Methanol, Meng Li, Li-Gang Feng Jan 2022

Advances Of Phosphide Promoter Assisted Pt Based Catalyst For Electrooxidation Of Methanol, Meng Li, Li-Gang Feng

Journal of Electrochemistry

Transition metal phosphide (TMP), as an ideal catalytic promoter in methanol fuel oxidation, has received increased attention because of its multifunctional active sites, tunable structure and composition, as well as unique physical and chemical properties and efficient multi-composition synergistic effect. Some advances have been made for this catalyst system recently. In the current review, the research progresses of transition metal phosphides (TMPs) in the assisted electrooxidation of methanol including the catalysts fabrication and their performance evaluation for methanol oxidation are reviewed. The promotion effect of TMPs has been firstly presented and the catalyst systems based on the different metal centers …

Go to article

A High-Performance Continuous-Flow Mea Reactor For Electroreduction Co2 To Formate, Pei-Xuan Liu, Lu-Wei Peng, Rui-Nan He, Lu-Lu Li, Jin-Li Qiao Jan 2022

A High-Performance Continuous-Flow Mea Reactor For Electroreduction Co2 To Formate, Pei-Xuan Liu, Lu-Wei Peng, Rui-Nan He, Lu-Lu Li, Jin-Li Qiao

Journal of Electrochemistry

The electrochemical carbon dioxide reduction reaction (CO2RR) is a promising approach to produce liquid fuels and industrial chemicals by utilizing intermittent renewable electricity for mitigating environmental problems. However, the traditional H-type reactor seriously limits the electrochemical performance of CO2RR due to the low CO2 solubility in electrolyte, and high ohmic resistance caused by the large distance between two electrodes, which is unbeneficial for industrial application. Herein, we demonstrated a high-performance continuous flow membranes electrode assembly (MEA) reactor based on a self-growing Cu/Sn bimetallic electrocatalyst in 0.5 mol·L-1 KHCO3 for converting CO2 to …

Go to article

Acetate Solutions With 3.9 V Electrochemical Stability Window As An Electrolyte For Low-Cost And High-Performance Aqueous Sodium-Ion Batteries, Dao-Yun Lan, Xiao-Feng Qu, Yu-Ting Tang, Li-Ying Liu, Jun Liu Jan 2022

Acetate Solutions With 3.9 V Electrochemical Stability Window As An Electrolyte For Low-Cost And High-Performance Aqueous Sodium-Ion Batteries, Dao-Yun Lan, Xiao-Feng Qu, Yu-Ting Tang, Li-Ying Liu, Jun Liu

Journal of Electrochemistry

Low-cost and high-safety aqueous sodium-ion batteries have received widespread attention in the field of large-scale energy storage, but the narrow electrochemical stability window (1.23 V) of water limits the energy density of aqueous sodium-ion batteries. The “water-in-salt” strategy which uses the interaction between cations and water molecules in the solution can inhibit water decomposition and broaden the electrochemical stability window of water. In this work, two types of low-cost salts, namely, ammonium acetate (NH4CH3COOH) and sodium acetate (NaCH3COOH), were used to configure a mixed aqueous electrolyte for aqueous sodium-ion batteries. The solution consisted of …

Go to article

First Prev Next Last