Materials Science and Engineering Commons^™

Design, Modeling, And Testing Of A Novel Inductor For Electric Vehicles: Iron Nitride Soft Magnetic Composites, Sydney F. Fultz-Waters, Jacob Krynock

Materials Engineering

New technology for electric vehicles (EVs) must meet the requirements of higher energy usage, lower costs, and more sustainable source materials. One promising material for EV power system components is iron nitride (IN) soft magnetic composites (SMCs) because of their competitive magnetic properties and high abundance of the source materials. As part of an ongoing program at Sandia National Laboratories, this project focused on using computer modeling to optimize the prototyping process for an iron nitride SMC toroidal inductor to reach a target inductance of 600 μH. Four inductors with different combinations of wiring (26 AWG and 20 AWG) and …

Biopolymer-Based Sustainable Food Packaging Materials: Challenges, Solutions, And Applications, Kalpani Y. Perera, Amit Jaiswal, Swarna Jaiswal

Articles

Biopolymer-based packaging materials have become of greater interest to the world due to their biodegradability, renewability, and biocompatibility. In recent years, numerous biopolymers—such as starch, chitosan, carrageenan, polylactic acid, etc.—have been investigated for their potential application in food packaging. Reinforcement agents such as nanofillers and active agents improve the properties of the biopolymers, making them suitable for active and intelligent packaging. Some of the packaging materials, e.g., cellulose, starch, polylactic acid, and polybutylene adipate terephthalate, are currently used in the packaging industry. The trend of using biopolymers in the packaging industry has increased immensely; therefore, many legislations have been approved …

Experimental And Machine Learning Studies On Chitosan-Polyacrylamide Copolymers For Selective Separation Of Metal Sulfides In The Froth Flotation Process, Keitumetse Monyake, Taihao Han, Danish Ali, Lana Z. Alagha, Aditya Kumar

Mining Engineering Faculty Research & Creative Works

The froth flotation process is extensively used for the selective separation of valuable base metal sulfides from uneconomic associated minerals. However, in this complex multiphase process, various parameters need to be optimized to ensure separation selectivity and peak performance. In this study, two machine learning (ML) models, artificial neural network (ANN) and random forests (RF), were used to predict the efficiency of in-house synthesized chitosan-polyacrylamide copolymers (C-PAMs) in the depression of iron sulfide minerals (i.e., pyrite) while valuable base metal sulfides (i.e., galena and chalcopyrite) were floated using nine flotation variables as inputs to the models. The prediction performance of …

Dissolution Rates Of Borophosphate Glasses In Deionized Water And In Simulated Body Fluid, Parker T. Freudenberger, Rebekah L. Blatt, Richard K. Brow

Materials Science and Engineering Faculty Research & Creative Works

Particles of Borophosphate Glasses with the Nominal Molar Compositions 16Na₂O-(24-Y)CaO-YSrO-XB₂O₃-(60-X)P₂O₅ (Mol%), Where 0 ≤ X ≤ 60 and Y = 0, 12, and 24, Were Reacted in Deionized Water and in Simulated Body Fluid (SBF) at 37 °C. for the Dissolution Experiments in Water, the PH of the Solution at the Conclusion of the Experiments Increased Systematically, from 2.1 to 9.5, for Y = 0 Glasses When 'x' Increased from 0 to 60. the Reaction Rates over the First 8–24 H of Dissolution in Both SBF and Deionized Water Followed Linear …

Erratum To “Structure Of Tin Phosphate Glasses By Neutron And X-Ray Diffraction” [Journal Of Non Crystalline Solids:X 2c (2019) 100017] (Journal Of Non-Crystalline Solids: X (2019) 2, (S2590159119300305), (10.1016/J.Nocx.2019.100017)), U. Hoppe, Richard K. Brow, A. C. Hannon, M. V. Zimmermann

Materials Science and Engineering Faculty Research & Creative Works

The publisher regrets the following conflict of interest text was not published. • All the authors listed in this article have made Substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data for the work; AND drafting the work or revising it critically for important intellectual content; AND Final approval of the version to be published. • I also undertake that the article represents valid work. Neither this article nor any part of it has been copied or plagiarized from other works. • That the article has not been published so far …

Exploring The Potential Of Pavegen’S Kinetic Energy Generating Floor For Sustainable Energy Solutions: A Proposal For Cal Poly Slo, Brandon J. Cuneo

Construction Management

This paper proposes the installation of Pavegen's kinetic energy generating floors at Cal Poly’s campus as a sustainable energy solution. Pavegen has developed a pioneering technology that converts footsteps into clean and renewable energy. The versatility of these floors is demonstrated through successful implementations in various settings, such as transportation hubs and public spaces, generating power from foot traffic. Collaborations with Schneider Electric, installation at Dupont Circle, and integration at Heathrow Airport showcase the potential for sustainable urban infrastructure. This paper outlines research conducted on Pavegen and similar solutions, including communication with company representatives and examining proposed installation locations at …

Thermal, Magnetic, And Electrical Properties Of Thin Films And Nanostructures: From Magnetic Insulators To Organic Thermoelectrics, Michael J. M. Roos

Electronic Theses and Dissertations

Modern fabrication and growth techniques allow for the development of increasingly smaller and more complex solid state structures, the characterization of which require highly specialized measurement platforms. In this dissertation I present the development of techniques and instrumentation used in magnetic, thermal, and electrical property measurements of thin films and nanostructures. The understanding of trapped-flux induced artifacts in SQUID magnetometry of large paramagnetic substrates allows for the resolution of increasingly small moments. Using these methods, the antiferromagnetic coupling of the interface between a Y₃Fe₅O₁₂ film and Gd₃Ga₅O₁₂substrate is quantitatively …

Cu/Bnx Catalysts For Electrocatalytic Reduction Of Nitrogen And Nitrate Waste, Siming Huo

Dissertations

Ammonia (NH₃) is one of the most important chemicals to the whole human society. The invention of the Haber-Bosch process enabled the industrial production of NH₃. However, owing to the high capital costs of the centralized plant and the equipment and the negative environmental impact, it is no longer suitable for today's needs of human development. As a result, there is an urgent need to investigate sustainable approaches for ammonia production. Among those reported studies, nitrogen reduction (NRR) and nitrate reduction reaction (NO₃RR) are considered applicable in the future. However, after decades of studying …

Influence Of Material Properties On Granules Prepared By Dry Co-Rotating Twin Screw Extrusion And Counterrotating Batch Mixing, Afstathios Steve Pafiakis

Dissertations

Recently, the pharmaceutical industry has shown interest in continuous granulating technology because of the flexibility it offers as an option that bypasses the costly scale-up process associated with batch manufacturing. However, the granulation mechanism(s) using twin screw co-rotating hot melt extrusion (HME) has not been fully explored, and it is not yet well understood. This leads to costly experiments during development and process reliability problem in commercial manufacturing. The main objective of this dissertation is to increase the mechanistic understanding of the twin screw granulation process of systems containing an active pharmaceutical ingredient (API) and a polymer excipient. This is …

Multi-Physics Numerical Simulation Of Corrosion And Service Life Evaluation Of Novel Reinforced Concrete Systems, Jin Fan

Dissertations

Durability challenges of reinforced concrete materials can shorten the service life and increase the carbon footprint of civil infrastructure systems. Novel alternative materials, such as high-performance fiber reinforced cementitious composites (HPFRCCs) and recycled aggregate concrete (RAC), offer an alternative to tradi-tional concrete materials by increasing the service life of infrastructure or reducing raw material consumption, thereby reducing the life-cycle carbon footprint. Due, in part, to a lack of robust numerical tools, predicting the durability response of these emerging cementitious materials has been insufficiently addressed. A time-dependent multi-physics modeling framework is proposed and adopted to investigate the chloride induced deterioration mechanisms …

Decoding The Hydrodynamic Properties Of Microscale Helical Propellers From Brownian Fluctuations, Bernard Yurke

Materials Science and Engineering Faculty Publications and Presentations

The complex motility of bacteria, ranging from single-swimmer behaviors such as chemotaxis to collective dynamics, including biofilm formation and active matter phenomena, is driven by their microscale propellers. Despite extensive study of swimming flagellated bacteria, the hydrodynamic properties of their helical-shaped propellers have never been directly measured. The primary challenges to directly studying microscale propellers are 1) their small size and fast, correlated motion, 2) the necessity of controlling fluid flow at the microscale, and 3) isolating the influence of a single propeller from a propeller bundle. To solve the outstanding problem of characterizing the hydrodynamic properties of these propellers, …

Thermal Transport And Physical Characteristics Of Silver-Reinforced Biodegradable Nanolubricant, Jaime Taha-Tijerina, Karla Aviña, Nicolás Antonio Ulloa-Castillo, Dulce Viridiana Melo-Maximo

Informatics and Engineering Systems Faculty Publications

In this investigation, the thermal transport behavior of biodegradable lubricant reinforced with silver nanostructures (AgNs) at various filler fractions of 0.01, 0.05, 0.10, and 0.20 weight percent was evaluated over a temperature scan analysis, ranging from room temperature up to 60 °C. The experimental results revealed significant gradual enhancements in thermal conductivity as AgNs concentration and evaluating temperatures were increased. These improvements showed the important role of nanostructures’ interaction within the biodegradable lubricant. The thermal conductivity performance improved for nanolubricants ranging from 6.5% at 30 °C and 0.20 wt.% AgNs content up to a maximum 32.2%, which was obtained at …

P-Doped Ru-Pt Alloy Catalyst Toward High Performance Alkaline Hydrogen Evolution Reaction, Rong-Qin Huang, Wei-Ping Liao, Meng-Xuan Yan, Shi Liu, Yuan-Ming Li, Xiong-Wu Kang

Journal of Electrochemistry

Electrocatalytic water splitting represents grand promise for hydrogen fuel in modern energy equipment, and the design and fabrication of higher performance catalysts are at the central. Herein, we report the sequential phosphorus (P)-doping into ruthenium (Ru) nanoparticles (Ru-P/C) by thermal annealing of Ru nanoparticles in phosphine (PH₃) atmosphere and deposition of extremely low concentration of platinum (Pt) to obtain P-doped Ru-Pt alloy catalyst supported on carbon nanotubes (CNTs), which is denoted as (Ru-P)#Pt/C. The data by X-ray diffraction spectroscopy and transmission electron microscopy show that the Ru nanoparticles existed in the form of hexagonal close-packed (hcp) phase with …

Deep Euteceic Solvents-Assisted Synthesis Of Novel Network Nanostructures For Accelerating Formic Acid Electrooxidation, Jun-Ming Zhang, Xiao-Jie Zhang, Yao Chen, Ying-Jian Fan, You-Jun Fan, Jian-Feng Jia

Journal of Electrochemistry

Deep eutectic solvents (DESs) have been reported as a type of solvent for the controllable synthesis of metal nanostructures. Interestingly, flower-like palladium (Pd) nanoparticles composed of staggered nanosheets and nanospheres are spontaneously transformed into three-dimensional (3D) network nanostructures in choline chloride-urea DESs using ascorbic acid as a reducing agent. Systematic studies have been carried out to explore the formation mechanism, in which DESs itself acts as a solvent and soft template for the formation of 3D flower-like network nanostructures (FNNs). The amounts of hexadecyl trimethyl ammonium bromide and sodium hydroxide also play a crucial role in the anisotropic growth and …

Fe Nanoparticles Encapsulated In N-Doped Porous Carbon For Efficient Oxygen Reduction In Alkaline Media, Chun-Yan Li, Rui Zhang, Xiao-Jie Ba, Xiao-Le Jiang, Yao-Yue Yang

Journal of Electrochemistry

Rational design and synthesis of non-precious-metal catalyst plays an important role in improving the activity and stability for oxygen reduction reaction (ORR) but remains a major challenge. In this work, we used a facile approach to synthesize iron nanoparticles encapsulated in nitrogen-doped porous carbon materials (Fe@N-C) from functionalized metal-organic frameworks (MOFs, MET-6). Embedding Fe nanoparticles into the carbon skeleton increases the graphitization degree and the proportion of graphitic N as well as promotes the formation of mesopores in the catalyst. The Fe@N-C-30 catalyst showed the excellent ORR activity in alkaline solutions (E₀ = 0.97 V vs. RHE, E_{1/2 …}

Effective Nanomembranes From Chitosan/Pva Blend Decorated Graphene Oxide With Gum Rosin And Silver Nanoparticles For Removal Of Heavy Metals And Microbes From Water Resources, Mohamed Morsy

Nanotechnology Research Centre

No abstract provided.

Flexural Wave Manipulation By Non-Hermitian Planar Elastic Metasurface, Katerina Stojanoska

Theses and Dissertations

It has been demonstrated that metasurfaces with spatially asymmetric inner geometry exhibit unidirectional scattering effects, which can be used to control waves in a directional fashion. In this thesis, a planar Non-Hermitian elastic metasurface exhibiting unidirectional focusing of flexural waves is proposed. Asymmetrically loaded piezoelectric disks and metallic blocks comprise the unit cells. By using a negative capacitance shunting, a tunable material loss is embedded into the system. With suitable engineering of the induced loss profile, resonating building blocks are designed, which are capable of independently accessing unidirectional zero reflection. A planar metasurface is then created so that constructive interference …

Enhanced Throughput Of Aligned Polyacrylonitrile Nanofiber Manufacturing Via High-Speed Centrifugal Spinning, Jason Glen Ippolito

Theses and Dissertations

Centrifugal spinning is noteworthy due to its high fiber throughput rate compared to other nanofiber manufacturing platforms. It is capable of producing fibers in the nanoscale diameter range from a multitude of polymers, such as polyacrylonitrile (PAN). With a traditional centrifugal spinner, fiber can be rapidly spun and collected on static posts. However, the use of static posts inevitably forms a dense ring of fiber after a short period of time, and this fiber build up can halt the spinning process. In this work, the factors that influence the throughput and scalability of highly aligned centrifugally spun PAN fibers are …

The Neighborhood As An Energy-Generating Community The Case Of El-Banafseg Residential Neighborhood, East Cairo, Mona Helmy, Amany Micheal

Architectural Engineering

No abstract provided.

Effect Of Cr And Ni Concentrations On Resilience Of Cast Nb-Alloyed Heat Resistant Austenitic Steels At Extreme High Temperatures, Simon N. Lekakh, Mario F. Buchely, Mei Li, Larry Godlewski

Materials Science and Engineering Faculty Research & Creative Works

Austenitic Cr–Ni Alloyed Heat Resistant Steels with Nb Additions Are Used for Intensively Thermo-Mechanically Loaded Cast Components Working in Extreme High Temperature Oxidizing Environment. their Performance during Static Oxidation and Transient Thermo-Mechanical Loading Was Investigated to Recommend an Optimal Cost-Effective Cr/Ni Composition of Nb-Alloyed Austenitic Class Steels. the Static Oxidation and Transient Thermo-Mechanical Behavior of Three Austenitic Steels with Different Cr/Ni Alloying Levels Were Investigated and Compared for Variety of Working Conditions. Static Oxidation Was Performed between 900 °C and 1000 °C in Air for 400 H. the Critical Temperature Which Increases Spallation during Static Oxidation Was Determined for Each …

Method Of Evanescently Coupling Whispering Gallery Mode Optical Resonators Using Liquids, Hengky Chandrahalim, Kyle T. Bodily

AFIT Patents

The present invention relates to evanescently coupling whispering gallery mode optical resonators having a liquid coupling as well as methods of making and using same. The aforementioned evanescently coupling whispering gallery mode optical resonators having a liquid couplings provide increased tunability and sensing selectivity over current same. The aforementioned. Applicants’ method of making evanescent-wave coupled optical resonators can be achieved while having coupling gap dimensions that can be fabricated using standard photolithography. Thus economic, rapid, and mass production of coupled WGM resonators-based lasers, sensors, and signal processors for a broad range of applications can be realized.

Evaluating The Potential Of Geopolymer Concrete As A Sustainable Alternative For Thin White-Topping Pavement, Sathvik S. Chandra, Pshtiwan Shakor, Sarwar Mohmmad, Bankole O. Awuzie, Atul K. Singh, Abishek Rauniyar, M Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

Introduction:

The construction industry uses a large quantity of natural materials in the production of concrete. Although attempts to incorporate green materials in concrete began years ago, not every building uses such materials today, and roadways, particularly, still rely on unsustainable materials.

Methods:

Therefore, this study used alternative materials, including fly ash, manufactured sand aggregates, and different molarities of alkaline activators, to incorporate waste byproducts in a geopolymer concrete white-topping pavement layer. Recent developments have led to the emergence of geopolymers as distinct classes of materials. In the 1990s, fly ash-based geopolymers became more popular than other kinds, as they …

Confined Growth Of Perovskite Stabilized By Strain Engineering, Xucheng Tao

McKelvey School of Engineering Graduate Student Theses & Dissertations

Halide perovskite has been extensively studied for its excellent optoelectronic properties. In this project, we want to explore some range of band gap that conventional 2D materials could not have. To overcome this challenge, we aimed to produce two-dimensional (2D) perovskites with large scale which is suitable for device fabrication and improve its stability using strain engineering. To prepare such 2D perovskite, we tried 2D transformation first and then decided to use confined growth to optimize result. For strain engineering, we employed sputtered nickel as an external stressor.

So far, we have produced multilayer polycrystalline perovskites material close to atomic …

A Prediction Of Young's Modulus For Tin Containing Phosphate Glasses Using Quantitative Structural Information, Tatsuki Shimizu, Akira Saitoh, Uwe Hoppe, Grégory Tricot, Richard K. Brow

Materials Science and Engineering Faculty Research & Creative Works

A Rigid Unit Packing Fraction (RUPF) Model Was Used to Better Understand the Influence of Local Structural Units on the Young's Elastic Modulus (E) of Binary and Ternary Tin Phosphate Glasses. Quantitative Analyses of the Units that Constitute the Glass Structure, Obtained from X-Ray/neutron Diffraction and 31P MAS-NMR Spectroscopy, Were Used to Calculate Polyhedral Packing Fractions that, with Tabulated Bond Dissociation Energies, Were Used to Predict E based on a Modification of the Makashima-Mackenzie Relationship, Which Uses Ion Sizes to Calculate Packing Fractions. Predictions based on the RUPF Model Are Better Than Those based on Ion Sizes, and Extending the …

Two-Dimensional Field Effect Transistor, Yimeng Li

McKelvey School of Engineering Graduate Student Theses & Dissertations

As silicon-based field-effect transistors (FETs) approach their physical limits with channel lengths approaching 5 nm, the search for new semiconductor materials that can surpass this limit has become urgent. Two-dimensional layered semiconductor nanomaterials, represented by graphene, have emerged as promising candidates due to their unique physical, mechanical, and chemical properties. Unlike traditional silicon-based FETs, two dimensional (2D) layered nanomaterials are held together by van der Waals forces between layers, with no dangling bonds on the material surface, which can effectively address the short-channel effect issue faced by traditional silicon-based FETs. However, unlike traditional silicon-based FETs, which have matured fabrication systems, …

Memristive Behavior And Its Applications In Different Materials., Mingyang Wu

McKelvey School of Engineering Graduate Student Theses & Dissertations

The huge amount of data calculation requires the next generation non-volatile memory (NVM) technology to have the characteristics of large storage capacity and fast read/write speed. The storage and computing are separated in the traditional von Neumann architecture-based hardware platforms. The data transport between information processing and storage are causing increasing time latency, which is called von Neumann Bottleneck. Memristor, as a basic circuit component, could combine perception, storage, and computing in a single component, which has a very wide range of application prospectives. In this paper, we investigate binary oxide memristor and 2D material memristor, including their structural design …

Piezoelectric And Conductive Polymer Based Flexible Devices Enabling Cardiovascular Health Sensing And Energy Harvesting, Andrew Closson

Dartmouth College Ph.D Dissertations

Piezoelectric materials show great promise for low-power wearable and implantable sensing, but their rigidity makes it challenging to integrate them with biological tissue. To address this, researchers have started exploring polymer-based functional materials that offer flexibility and are suitable for interfacing with the human body. However, these materials are still in their early stages, and a framework is necessary to illustrate how these materials, in conjunction with novel fabrication techniques and device designs, can enable the development of multi-functional sensing and energy harvesting devices.

This thesis utilizes highly scalable fabrication methods for functional polymers to build and test a flexible …

Synthesis And Characterization Of Polyaniline-Based High-Performance Carbon For Energy Storage Applications, Udeshika Kangane Arachchige

Electronic Theses & Dissertations

With the increase in global population, the demand for the energy required for daily activities including household necessities, electronic and electric devices, etc. enhances at an alarming proportion. Under these circumstances, supercapacitors (SCs) have attracted great attention as electrochemical energy storage devices. Nowadays, most commercially available supercapacitors are composed of metallic compounds. Due to the high consumption, and limited availability of these elements, it is necessary to find an alternative, effective, low-cost materials in place of using it. With the purpose of achieving high electrochemical performance, this research work focuses on developing carbon derived from polyaniline (PANI) as an efficient …

Synthesis And Characterization Of Sodium Cathode Materials, He Zhou

McKelvey School of Engineering Graduate Student Theses & Dissertations

As sodium batteries hold great promise as a next-generation energy storage device to replace lithium batteries, the development of sodium battery materials has become increasingly urgent. The current study aims to investigate two potential sodium-ion battery cathode materials, Sodium Vanadium Phosphate, and Sodium Manganese Hexacyanoferrate, optimize the experimental procedures, conduct a systematic analysis of material properties and characterization, and ultimately determine the ideal synthesis conditions for these materials.

In the first part of the study, we focused on optimizing the synthesis of Sodium Vanadium Phosphate. By investigating various synthesis conditions, such as annealing temperature, pressure, ascorbic acid content, and material …

Study Of A Carbon Fiber Reinforced Polymer Composite Using A Biobased Polyurethane As A Thermosetting Resin, Teddy Mageto

Electronic Theses & Dissertations

Carbon Fiber Reinforced Polymer composites (CFRP) have garnered increasing interest in recent years especially in the aerospace and automobile industries where they are gradually replacing metals as structural materials. This is owing to their light weight, high strength, high modulus, and excellent strength-to-weight ratio. Polymers are typically used as thermosetting resins in these composites. However, the synthesis of polymers currently is conducted via petrochemical processes which leads to adverse effects on the environment. To this end, in this work a biobased Polyurethane (PU) was used as a thermosetting resin in a CFRP. The biobased PU was synthesized by the reaction …