Materials Science and Engineering Commons^™

Breakout Session A-1: "Digital Continuum In Logistics", Kai Furmans, Fabio Sgarbossa

International Material Handling Research Colloquium

No abstract provided.

Breakout Session A-2: "Digital Continuum In Logistics", Leon F. Mcginnis, Ardavan Asef-Vaziri

International Material Handling Research Colloquium

No abstract provided.

Breakout Session A-3: "Digital Continuum In Logistics", Moritz Roidl, Natalie S. Cherbaka

International Material Handling Research Colloquium

No abstract provided.

Breakout Session A-4: "Digital Continuum In Logistics", René De Koster, David Sourek

International Material Handling Research Colloquium

No abstract provided.

Opening Keynote: "Towards A Digital Continuum", Michael Ten Hompel

International Material Handling Research Colloquium

No abstract provided.

Advancing Flame Retardant Prediction: A Self-Enforcing Machine Learning Approach For Small Datasets, Cheng Yan, Xiang Lin, Xiaming Feng, Hongyu Yang, Patrick Mensah, Guoqiang Li

Faculty Publications

Improving the fireproof performance of polymers is crucial for ensuring human safety and enabling future space colonization. However, the complexity of the mechanisms for flame retardant and the need for customized material design pose significant challenges. To address these issues, we propose a machine learning (ML) framework based on substructure fingerprinting and self-enforcing deep neural networks (SDNN) to predict the fireproof performance of flame-retardant epoxy resins. Our model is based on a comprehensive understanding of the physical mechanisms of materials and can predict fireproof performance and eliminate the needs for properties descriptors, making it more convenient than previous ML models. …

Intrinsically Stretchable Three Primary Light-Emitting Films Enabled By Elastomer Blend For Polymer Light-Emitting Diodes, Min Woo Jeong, Jin Hyun Ma, Jae Sung Shin, Jun Su Kim, Guorong Ma, Tae Uk Nam, Xiaodan Gu, Seong Jun Kang, Jin Young Oh

Faculty Publications

Intrinsically stretchable light-emitting materials are crucial for skin-like wearable displays; however, their color range has been limited to green-like yellow lights owing to the restricted stretchable light-emitting materials (super yellow series materials). To develop skin-like full-color displays, three intrinsically stretchable primary light-emitting materials [red, green, and blue (RGB)] are essential. In this study, we report three highly stretchable primary light-emitting films made from a polymer blend of conventional RGB light-emitting polymers and a nonpolar elastomer. The blend films consist of multidimensional nanodomains of light-emitting polymers that are interconnected in an elastomer matrix for efficient light-emitting under strain. The RGB blend …

International Material Handling Research Colloquium Program, College Industry Council On Material Handling Education

International Material Handling Research Colloquium

No abstract provided.

Unlocking Road Stability: Machine Learning-Powered Prediction Of Bitumen Distortion Under Traffic Flow Influence, Sabahudin Vrtagic, Milan Dordevic, Fatih Dogan, Muhammed Codur, Mario Hoxha, Edis Softic

Materials Science and Engineering Faculty Research & Creative Works

Road intersections are made of asphalt pavement, a popular road surface material used worldwide. The pavement may suffer deformities and deterioration, resulting in higher maintenance expenses and an elevated likelihood of road accidents, due to factors such as heavy vehicles and environmental variables like temperature and rainfall. To tackle these obstacles, researchers have devised several machine-learning algorithms and optimization techniques. These tools aim to forecast and scrutinize pavement deformation, with the goal of refining pavement design and maintenance approaches, as well as obtaining a more comprehensive comprehension of the factors that impact pavement effectiveness. This paper shows that heavy vehicles …

Conventional Platinum Metal Implants Provoke Restenosis Responses In Atherogenic But Not Healthy Arteries, Lea M. Morath, Roger J. Guillory Ii, Alexander A. Oliver, Shu Q. Liu, Martin L. Bocks, Galit Katarivas Levy, Jaroslaw Drelich, Jeremy Goldman

Michigan Tech Publications, Part 1

Platinum-containing stents are commonly used in humans with hypercholesterolemia, whereas preclinical stent evaluation has commonly been performed in healthy animal models, providing inadequate information about stent performance under hypercholesterolemic conditions. In this investigation, we used an ApoE−/− mouse model to test the impact of hypercholesterolemia on neointima formation on platinum-containing implants. We implanted 125 μm diameter platinum wires into the abdominal aortas of ApoE−/− and ApoE+/+ mice for 6 months, followed by histological and immunofluorescence examination of neointimal size and composition. It was found that ApoE−/− mice developed neointimas with four times larger area and ten times greater thickness than …

Measurement Of Thermal Conductivity Of Epoxy Resin Reinforced With Different Weight Ratios Of Glass And Carbon Powders, Edrees Edaan Ghadeer

Al-Bahir

The effect of thermal conductivity was studied on the composites prepared before and after reinforcement with different weight fractions (10, 20, 30, 40, 50, 60 wt %), using a Disc Lee's device, and the dispersion of the filler was studied by morphological analysis of the complexes using scanning electron microscopy (SEM). The (SEM) of glass composite powders, showed a smooth surface with a chance of forming very few voids, clusters and blisters on the surface of the sample, which increased with the increase of the weight fractions of the filled powder. While the composites filled with carbon powders show smooth …

Additive Manufacturing Of Stretchable Strain Sensors: Fabrication, Optimization And Application, John Nady Shihat Bastawrous

Theses and Dissertations

In this project, a novel strain sensor design is fabricated employing different additive manufacturing techniques. The spring sensor's primary material is PLA-Like resin with a nanocomposite encapsulation layer as the functional material. The main principle of Straining the sensors results in a change in resistivity as the distances among the conductive carbon particles change according to the strain applied.

Sensor fabrication consists of two parts: spring manufacturing and development of nanocomposite encapsulation The nanocomposite matrix is developed through the dispersion of Graphene and Carbon nanotubes in Thermoplastic Polyurethane through sonication and magnetic hotplate stirring. While the spring itself is manufactured …

Material Design And Performance Of Carbon Monoxide-Fueled Solid Oxide Fuel Cells: A Review, Wei Zhang, Yun Hang Hu

Michigan Tech Publications, Part 1

Solid oxide fuel cells (SOFCs) are electrochemical energy conversion devices with fuel flexibility. Since carbon monoxide (CO) is a major product of SOFC anodes operating with hydrocarbon fuels, direct utilization of CO as a fuel is expected for more efficient operation of SOFCs. A review on CO-fueled SOFC technologies is imperative to promote research activities in this important field, but it has not been published. In this review, we summarize and comment on literatures in this field, with respect to (1) materials developed for three fundamental components (anode, cathode, and electrolyte), (2) power output and stabilization strategies, and (3) critical …

Uncovering Transient Dynamics And Equilibrium States Of Particle Aggregates With RaúL BayoáN Cal, RaúL BayoáN Cal

PDXPLORES Podcast

In this episode of PDXPLORES, Raúl Bayoán Cal, Professor of Mechanical & Materials Engineering at the Maseeh College of Engineering and Computer Science, discusses his latest National Science Foundation award-winning research, Uncovering Transient Dynamics and Equilibrium States of Particle Aggregates in Fluids, investigating transient dynamics of fluid mechanics in the absence of gravity. These experiments, which utilize the Dryden Drop Tower and research facilities aboard the International Space Station, will benefit the study of granular media in aggregation models such as pollen deposition, algae growth, and plastic pollution.

Click on the "Download" button to access the audio transcript.

Toward Low Carbon Footprint And Lightweight Masonry Alkali-Activated Material, Zina Ebrahim, Mohammad Mastali, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

The portland cement concrete industry and the masonry industry are undergoing changes in response to skilled labor shortages and concerns over climate and pollution. There may be interest from parts of the industry in lower carbon footprint and lightweight masonry products. Toward this aim, the use of hemp shiv--the woody core of the hemp plant--in alkali-activated concrete was investigated herein and shown to have a wide range of impacts on the hardened state characteristics of a material suitable for structural concrete masonry units (CMUs) in accordance with ASTM C90 requirements. Hemp shiv is well known for its use in hempcrete, …

Unveiling Pain: Wearables For Objective Pain Measurement, Hanqing Tang

Masters Theses

">">Pain perception is a subjective experience that differs significantly among individuals, often leading to inconsistencies in assessment and management. A critical issue within this context is the gender bias in pain evaluation, which contributes to unequal treatment and perpetuates gender inequality within the healthcare system. This thesis presents an in-depth investigation of the problem and proposes the development of a wearable device for objective pain assessment. Physiological parameters — Electrocardiography (ECG) can be collected from cardiac sound signals auscultated by fabrics via nanometre-scale vibrations. Machine learning methods can accurately classify heart rate and acute pain intensity of participants. …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Catalyzed Oxidation Of Ig-110 Nuclear Graphite By Simulated Fission Products Ag And Pd Nanoparticles, Junhua Jiang, John Stempien, Yaqiao Wu

Materials Science and Engineering Faculty Publications and Presentations

To evaluate the stability of nuclear materials in high temperature gas reactors under air ingress conditions, catalytic oxidation of IG-110 graphite by two simulated fission products, metallic Pd and Ag, was studied in oxidative atmosphere and at temperatures up to 1000 °C using an integrated furnace, mass spectroscopy and infrared spectroscopy system. Transmission electron microscopy and X-ray diffraction studies show that Pd and Ag nanoparticles were successfully introduced onto powdery IG-110 graphite through an impregnation and subsequent heat-treatment process. The combined mass spectroscopy and infrared spectroscopy methods allow simultaneous analysis of two gaseous products, CO and CO₂, and …

The Modernization Of Large Power Transformer Tanks, Babajide O. Williams

Electronic Theses and Dissertations

Due to the current demands placed on the power grid in terms of climate change, increasing urbanization, and terrorist attacks, the U.S. government in response to these demands, mandated that all the grid components be modernized in order to increase their reliability. As a critical component of the grid, Large Power Transformers (LPTs) play a key role in ensuring sustainable power generation and distribution. A literature search performed in this work and the analysis of data retrieved from the search showed that the tanks of these LPTs are critical to their durability, longevity, and reliability. Therefore, the reliability of LPTs …

Improving The Tensile Mechanical Properties Of Direct Energy Deposited (Ded) Inconel 718 Aircraft Components Using A Standard Heat Treatment, Spencer Vincent Flynn

Materials Engineering

This project aimed to improve the mechanical properties of as-printed additively manufactured Inconel 718 samples using a heat treatment usually used for cast and wrought Inconel 718. The mechanical properties sought to be optimized were yield strength, ultimate tensile strength, elongation, and reduction in area. The property goals were to match or exceed those of cast and heat treated Inconel 718. Wire-fed electron beam direct energy deposition (DED) was used to manufacture the samples, which were then heat treated using the AMS 5663 standard in an inert atmosphere. The samples were then tested in tension to obtain data on their …

Morphology And Hemodynamics Of Cerebral Arteries And Aneurysms In A Rare Pair Of Monozygotic Twins, Hang Yi, Zifeng Yang, Luke C. Bramlage, Bryan R. Ludwig

Mechanical and Materials Engineering Faculty Publications

In this preliminary study, the underlying pathophysiology mechanisms of cerebral aneurysms (CAs) in monozygotic twins (MTs) were investigated via a rare pair of MTs (twin A and twin B) involving four reconstructed arterial models using preclinical information. First, dimensions and configurated outlines of three-perspective geometries were compared. Adopting an in-vitro validated numerical CA model, hemodynamic characteristics were investigated in the MTs, respectively. Despite expected genetic similarities, morphological comparisons show that configurations of cerebral arteries exhibit significant differences between the twins. The ICA size of twin A is larger than that in twin B (2.23~25.86%), varying with specific locations, attributing to …

Mechanical Testing Data From Neutron Irradiations Of Pm-Hip And Conventionally Manufactured Nuclear Structural Alloys, Yaqiao Wu

Materials Science and Engineering Faculty Publications and Presentations

This article presents the comprehensive mechanical testing data archive from a neutron irradiation campaign of nuclear structural alloys fabricated by powder metallurgy with hot isostatic pressing (PM-HIP). The irradiation campaign was designed to facilitate a direct comparison of PM-HIP to conventional casting or forging. Five common nuclear structural alloys were included in the campaign: 316L stainless steel, SA508 pressure vessel steel, Grade 91 ferritic steel, and Ni-base alloys 625 and 690. Irradiations were carried out in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) to target doses of 1 and 3 displacements per atom (dpa) at target temperatures …

Investigation Into Oxygen Diffusion As It Relates To Alpha Case Formation In Ti-6al-4v Based On Different Forging Thermal Cycles, Tyler J. Meador, Jon Leduc, Francesca Hope

Materials Engineering

An investigation into the growth kinetics of alpha case in Ti-6Al-4V in the presence of oxygen was conducted for different forging thermal cycles. This was done to determine whether the alpha case should be removed after each thermal cycle or as the final step after forging. The thermal cycles consisted of four hours at 1750 °F. Samples were subjected to this treatment one, two, three, and four times along with a continuous sixteen hour hold. Four cycle and Hold samples were subjected to an additional thermal cycle above the beta transus at 1925 °F. These then went through a final …

Surface Characterization Of Low-Density Polyethylene Mulch, Risha Shah

Materials Engineering

Plastic pollution in aquatic systems has traditionally been highlighted in past and current research due to the increase in plastic production every year. Unfortunately, quantitative and qualitative data regarding plastic pollution on land systems such as agricultural mulch is limited. Agricultural mulch breaks down into macroplastics and then degrades into microplastics. The microplastics investigated in this study are all secondary microplastics: microplastics that form due to weathering of larger fragments of plastic. Weathering can occur due to a variety of factors; however, UV radiation and mechanical weathering have been the factors of focus on most current research in microplastic formulation. …

3d Printed Aircraft, Matthew Nagy, Charles D'Amico, Alexis Salgado Medina

Mechanical Engineering

This project is to design, build, and test a 3D-printable aircraft. The goal is to create a final design that will be able to fly for the longest duration possible, around 20 seconds. To determine the correct preliminary design and manufacturing process for a 3D printed RC aircraft, an analysis of multiple design options and manufacturing materials was performed. This allowed for a variety of choices for aircraft type, airfoil design, structure, among other topics to be narrowed down to the most promising option. It has been found that the aircraft will follow a design similar to industry motor-gliders, with …

Experimental Characterization And Computer Vision-Assisted Detection Of Pitting Corrosion On Stainless Steel Structural Members, Riley J. Muehler

Master's Theses

Pitting corrosion is a prevalent form of corrosive damage that can weaken, damage, and initiate failure in corrosion-resistant metallic materials. For instance, 304 stainless steel is commonly utilized in various structures (e.g., miter gates, heat exchangers, and storage tanks), but is prone to failure through pitting corrosion and stress corrosion cracking under mechanical loading, regardless of its high corrosion resistance. In this study, to better understand the pitting corrosion damage development, controlled corrosion experiments were conducted to generate pits on 304 stainless steel specimens with and without mechanical loading. The pit development over time was characterized using a high-resolution laser …

Interlaminar Tensile Properties Of Unidirectional And Woven Carbon Fiber Reinforced Toughened Epoxy Laminates, Eric Timothy Casey, Sean Mckalip Thompson

Materials Engineering

This project aims to develop a dataset on interlaminar tensile strength comparing unidirectional and woven thermoset matrix carbon fiber composites keeping ply count, matrix material, and fiber diameter constant. The interlaminar tensile strength is an important property relating to the delamination failure mode. Interlaminar tensile strength is determined using the ASTM D6415 testing standard. This test is a modified four-point bend test using a 90° curved beam test specimen. Laminates were produced by laying up pre-impregnated carbon fiber sheets onto a curved beam tooling. The unidirectional laminate was produced with 20 plies in a [0,0,90,0,0]₄ layup pattern. The woven …

Failure Analysis Of Variably Sized 4340 Steel Mandrels Utilized In The Production Of Seamless Superalloy Rings Through The Vertical Ring Rolling Process, Mikhail Alexeyevich Vasilyev, Joshua Brady Venz

Materials Engineering

Vertical ring rolling is a forging process which forms seamless metal rings through applying a large force at elevated temperatures onto component materials stabilized by cylindrical mandrels. Carlton Forge Works, a company which produces rings of superalloy materials such as INCO718 and 718Plus, is experiencing a consistent failure of mandrels due to extreme conditions. An analysis of the lifetime (bulk material, heat treatment, and use) was performed, which aided in the identification of process variables tied to mandrel failure. Experiments were formed surrounding three variables of the mandrel heat treatment: Austenitization temperature, quenching temperature, and tempering conditions, with the goal …

Effect Of Environmental And Ultraviolet Degradation On The Albedo Of Polyethylene Sheet Materials For Improved Energy Harvesting By Bifacial Photovoltaic Power Plants, William A. Jang, Roxy H. Jackson-Gain

Materials Engineering

Solar energy farms typically utilize monofacial photovoltaic (mPV) cells in their arrays to capture direct sunlight to produce renewable energy. However, the efficiency of these farms can be increased by 2 – 6% through the implementation of bifacial photovoltaic cells (bPV). These bPV cells function by capturing incident ultraviolet (UV) light energy that is reflected off the surface to increase its overall energy production. The amount of UV energy that is reflected is dependent on the albedo value of surface, which is a measure of energy reflectance. In this study, samples of unreinforced polyethylene (PE), scrim-reinforced polyethylene (SR-PE), and woven …

Covalent Adaptable Networks For Wood Coatings, Jachin Boaz Clarke

Materials Engineering

Wood swells and shrinks causing problems with seasonal humidity. Applying thick coatings of reactive finishes based on cross-linked polyurethane, epoxy, or polyesters can slow moisture-vapor exchange. However, the use of thick coatings leads to cracking and crazing sooner than thin finishes. This research proposes the addition of 3.3 mol % triazabicyclodecene, a conventionally used covalent adaptable network catalyst, in a commercially available polyester-based wood coating. The self-healing of the wood coating is tested using DMA stress relaxation and compression molding. The result from DMA renders inconclusive and compression molding indicates the novel wood coating oxidizes at elevated temperatures. The wood …