Materials Science and Engineering Commons^™

How Reshoring Impacts Economy And Transportation Logistics – A Us Perspective, Md Sarder

International Material Handling Research Colloquium

No abstract provided.

Introducing The Central Backup Cellular Manufacturing System (Cbcms), Salah Elaskarai, Uday Venkatadri

International Material Handling Research Colloquium

No abstract provided.

A Novel Autonomous Vehicle-Based Storage And Retrieval System With Movable Lifts, Banu Yetkin Ekren, Tone Lerher, Boris Jerman

International Material Handling Research Colloquium

No abstract provided.

Performance Analysis Of Unequal Area Facility Layout Problem When Superimposed By Load Transport And Empty Flow Networks, Ardavan Asef-Vaziri, Cory Taylor

International Material Handling Research Colloquium

No abstract provided.

Breakout Session A-1: "Digital Continuum In Logistics", Kai Furmans, Fabio Sgarbossa

International Material Handling Research Colloquium

No abstract provided.

Breakout Session A-2: "Digital Continuum In Logistics", Leon F. Mcginnis, Ardavan Asef-Vaziri

International Material Handling Research Colloquium

No abstract provided.

Breakout Session A-3: "Digital Continuum In Logistics", Moritz Roidl, Natalie S. Cherbaka

International Material Handling Research Colloquium

No abstract provided.

Breakout Session A-4: "Digital Continuum In Logistics", René De Koster, David Sourek

International Material Handling Research Colloquium

No abstract provided.

Opening Keynote: "Towards A Digital Continuum", Michael Ten Hompel

International Material Handling Research Colloquium

No abstract provided.

Advancing Flame Retardant Prediction: A Self-Enforcing Machine Learning Approach For Small Datasets, Cheng Yan, Xiang Lin, Xiaming Feng, Hongyu Yang, Patrick Mensah, Guoqiang Li

Faculty Publications

Improving the fireproof performance of polymers is crucial for ensuring human safety and enabling future space colonization. However, the complexity of the mechanisms for flame retardant and the need for customized material design pose significant challenges. To address these issues, we propose a machine learning (ML) framework based on substructure fingerprinting and self-enforcing deep neural networks (SDNN) to predict the fireproof performance of flame-retardant epoxy resins. Our model is based on a comprehensive understanding of the physical mechanisms of materials and can predict fireproof performance and eliminate the needs for properties descriptors, making it more convenient than previous ML models. …

Intrinsically Stretchable Three Primary Light-Emitting Films Enabled By Elastomer Blend For Polymer Light-Emitting Diodes, Min Woo Jeong, Jin Hyun Ma, Jae Sung Shin, Jun Su Kim, Guorong Ma, Tae Uk Nam, Xiaodan Gu, Seong Jun Kang, Jin Young Oh

Faculty Publications

Intrinsically stretchable light-emitting materials are crucial for skin-like wearable displays; however, their color range has been limited to green-like yellow lights owing to the restricted stretchable light-emitting materials (super yellow series materials). To develop skin-like full-color displays, three intrinsically stretchable primary light-emitting materials [red, green, and blue (RGB)] are essential. In this study, we report three highly stretchable primary light-emitting films made from a polymer blend of conventional RGB light-emitting polymers and a nonpolar elastomer. The blend films consist of multidimensional nanodomains of light-emitting polymers that are interconnected in an elastomer matrix for efficient light-emitting under strain. The RGB blend …

International Material Handling Research Colloquium Program, College Industry Council On Material Handling Education

International Material Handling Research Colloquium

No abstract provided.

Unlocking Road Stability: Machine Learning-Powered Prediction Of Bitumen Distortion Under Traffic Flow Influence, Sabahudin Vrtagic, Milan Dordevic, Fatih Dogan, Muhammed Codur, Mario Hoxha, Edis Softic

Materials Science and Engineering Faculty Research & Creative Works

Road intersections are made of asphalt pavement, a popular road surface material used worldwide. The pavement may suffer deformities and deterioration, resulting in higher maintenance expenses and an elevated likelihood of road accidents, due to factors such as heavy vehicles and environmental variables like temperature and rainfall. To tackle these obstacles, researchers have devised several machine-learning algorithms and optimization techniques. These tools aim to forecast and scrutinize pavement deformation, with the goal of refining pavement design and maintenance approaches, as well as obtaining a more comprehensive comprehension of the factors that impact pavement effectiveness. This paper shows that heavy vehicles …

Conventional Platinum Metal Implants Provoke Restenosis Responses In Atherogenic But Not Healthy Arteries, Lea M. Morath, Roger J. Guillory Ii, Alexander A. Oliver, Shu Q. Liu, Martin L. Bocks, Galit Katarivas Levy, Jaroslaw Drelich, Jeremy Goldman

Michigan Tech Publications, Part 1

Platinum-containing stents are commonly used in humans with hypercholesterolemia, whereas preclinical stent evaluation has commonly been performed in healthy animal models, providing inadequate information about stent performance under hypercholesterolemic conditions. In this investigation, we used an ApoE−/− mouse model to test the impact of hypercholesterolemia on neointima formation on platinum-containing implants. We implanted 125 μm diameter platinum wires into the abdominal aortas of ApoE−/− and ApoE+/+ mice for 6 months, followed by histological and immunofluorescence examination of neointimal size and composition. It was found that ApoE−/− mice developed neointimas with four times larger area and ten times greater thickness than …

Measurement Of Thermal Conductivity Of Epoxy Resin Reinforced With Different Weight Ratios Of Glass And Carbon Powders, Edrees Edaan Ghadeer

Al-Bahir

The effect of thermal conductivity was studied on the composites prepared before and after reinforcement with different weight fractions (10, 20, 30, 40, 50, 60 wt %), using a Disc Lee's device, and the dispersion of the filler was studied by morphological analysis of the complexes using scanning electron microscopy (SEM). The (SEM) of glass composite powders, showed a smooth surface with a chance of forming very few voids, clusters and blisters on the surface of the sample, which increased with the increase of the weight fractions of the filled powder. While the composites filled with carbon powders show smooth …

Additive Manufacturing Of Stretchable Strain Sensors: Fabrication, Optimization And Application, John Nady Shihat Bastawrous

Theses and Dissertations

In this project, a novel strain sensor design is fabricated employing different additive manufacturing techniques. The spring sensor's primary material is PLA-Like resin with a nanocomposite encapsulation layer as the functional material. The main principle of Straining the sensors results in a change in resistivity as the distances among the conductive carbon particles change according to the strain applied.

Sensor fabrication consists of two parts: spring manufacturing and development of nanocomposite encapsulation The nanocomposite matrix is developed through the dispersion of Graphene and Carbon nanotubes in Thermoplastic Polyurethane through sonication and magnetic hotplate stirring. While the spring itself is manufactured …

Material Design And Performance Of Carbon Monoxide-Fueled Solid Oxide Fuel Cells: A Review, Wei Zhang, Yun Hang Hu

Michigan Tech Publications, Part 1

Solid oxide fuel cells (SOFCs) are electrochemical energy conversion devices with fuel flexibility. Since carbon monoxide (CO) is a major product of SOFC anodes operating with hydrocarbon fuels, direct utilization of CO as a fuel is expected for more efficient operation of SOFCs. A review on CO-fueled SOFC technologies is imperative to promote research activities in this important field, but it has not been published. In this review, we summarize and comment on literatures in this field, with respect to (1) materials developed for three fundamental components (anode, cathode, and electrolyte), (2) power output and stabilization strategies, and (3) critical …

Uncovering Transient Dynamics And Equilibrium States Of Particle Aggregates With RaúL BayoáN Cal, RaúL BayoáN Cal

PDXPLORES Podcast

In this episode of PDXPLORES, Raúl Bayoán Cal, Professor of Mechanical & Materials Engineering at the Maseeh College of Engineering and Computer Science, discusses his latest National Science Foundation award-winning research, Uncovering Transient Dynamics and Equilibrium States of Particle Aggregates in Fluids, investigating transient dynamics of fluid mechanics in the absence of gravity. These experiments, which utilize the Dryden Drop Tower and research facilities aboard the International Space Station, will benefit the study of granular media in aggregation models such as pollen deposition, algae growth, and plastic pollution.

Click on the "Download" button to access the audio transcript.

Toward Low Carbon Footprint And Lightweight Masonry Alkali-Activated Material, Zina Ebrahim, Mohammad Mastali, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

The portland cement concrete industry and the masonry industry are undergoing changes in response to skilled labor shortages and concerns over climate and pollution. There may be interest from parts of the industry in lower carbon footprint and lightweight masonry products. Toward this aim, the use of hemp shiv--the woody core of the hemp plant--in alkali-activated concrete was investigated herein and shown to have a wide range of impacts on the hardened state characteristics of a material suitable for structural concrete masonry units (CMUs) in accordance with ASTM C90 requirements. Hemp shiv is well known for its use in hempcrete, …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

Unveiling Pain: Wearables For Objective Pain Measurement, Hanqing Tang

Masters Theses

">">Pain perception is a subjective experience that differs significantly among individuals, often leading to inconsistencies in assessment and management. A critical issue within this context is the gender bias in pain evaluation, which contributes to unequal treatment and perpetuates gender inequality within the healthcare system. This thesis presents an in-depth investigation of the problem and proposes the development of a wearable device for objective pain assessment. Physiological parameters — Electrocardiography (ECG) can be collected from cardiac sound signals auscultated by fabrics via nanometre-scale vibrations. Machine learning methods can accurately classify heart rate and acute pain intensity of participants. …

Catalyzed Oxidation Of Ig-110 Nuclear Graphite By Simulated Fission Products Ag And Pd Nanoparticles, Junhua Jiang, John Stempien, Yaqiao Wu

Materials Science and Engineering Faculty Publications and Presentations

To evaluate the stability of nuclear materials in high temperature gas reactors under air ingress conditions, catalytic oxidation of IG-110 graphite by two simulated fission products, metallic Pd and Ag, was studied in oxidative atmosphere and at temperatures up to 1000 °C using an integrated furnace, mass spectroscopy and infrared spectroscopy system. Transmission electron microscopy and X-ray diffraction studies show that Pd and Ag nanoparticles were successfully introduced onto powdery IG-110 graphite through an impregnation and subsequent heat-treatment process. The combined mass spectroscopy and infrared spectroscopy methods allow simultaneous analysis of two gaseous products, CO and CO₂, and …

Thermal, Magnetic, And Electrical Properties Of Thin Films And Nanostructures: From Magnetic Insulators To Organic Thermoelectrics, Michael J. M. Roos

Electronic Theses and Dissertations

Modern fabrication and growth techniques allow for the development of increasingly smaller and more complex solid state structures, the characterization of which require highly specialized measurement platforms. In this dissertation I present the development of techniques and instrumentation used in magnetic, thermal, and electrical property measurements of thin films and nanostructures. The understanding of trapped-flux induced artifacts in SQUID magnetometry of large paramagnetic substrates allows for the resolution of increasingly small moments. Using these methods, the antiferromagnetic coupling of the interface between a Y₃Fe₅O₁₂ film and Gd₃Ga₅O₁₂substrate is quantitatively …

The Modernization Of Large Power Transformer Tanks, Babajide O. Williams

Electronic Theses and Dissertations

Due to the current demands placed on the power grid in terms of climate change, increasing urbanization, and terrorist attacks, the U.S. government in response to these demands, mandated that all the grid components be modernized in order to increase their reliability. As a critical component of the grid, Large Power Transformers (LPTs) play a key role in ensuring sustainable power generation and distribution. A literature search performed in this work and the analysis of data retrieved from the search showed that the tanks of these LPTs are critical to their durability, longevity, and reliability. Therefore, the reliability of LPTs …

Improving The Tensile Mechanical Properties Of Direct Energy Deposited (Ded) Inconel 718 Aircraft Components Using A Standard Heat Treatment, Spencer Vincent Flynn

Materials Engineering

This project aimed to improve the mechanical properties of as-printed additively manufactured Inconel 718 samples using a heat treatment usually used for cast and wrought Inconel 718. The mechanical properties sought to be optimized were yield strength, ultimate tensile strength, elongation, and reduction in area. The property goals were to match or exceed those of cast and heat treated Inconel 718. Wire-fed electron beam direct energy deposition (DED) was used to manufacture the samples, which were then heat treated using the AMS 5663 standard in an inert atmosphere. The samples were then tested in tension to obtain data on their …

Morphology And Hemodynamics Of Cerebral Arteries And Aneurysms In A Rare Pair Of Monozygotic Twins, Hang Yi, Zifeng Yang, Luke C. Bramlage, Bryan R. Ludwig

Mechanical and Materials Engineering Faculty Publications

In this preliminary study, the underlying pathophysiology mechanisms of cerebral aneurysms (CAs) in monozygotic twins (MTs) were investigated via a rare pair of MTs (twin A and twin B) involving four reconstructed arterial models using preclinical information. First, dimensions and configurated outlines of three-perspective geometries were compared. Adopting an in-vitro validated numerical CA model, hemodynamic characteristics were investigated in the MTs, respectively. Despite expected genetic similarities, morphological comparisons show that configurations of cerebral arteries exhibit significant differences between the twins. The ICA size of twin A is larger than that in twin B (2.23~25.86%), varying with specific locations, attributing to …

Experimental And Machine Learning Studies On Chitosan-Polyacrylamide Copolymers For Selective Separation Of Metal Sulfides In The Froth Flotation Process, Keitumetse Monyake, Taihao Han, Danish Ali, Lana Z. Alagha, Aditya Kumar

Mining Engineering Faculty Research & Creative Works

The froth flotation process is extensively used for the selective separation of valuable base metal sulfides from uneconomic associated minerals. However, in this complex multiphase process, various parameters need to be optimized to ensure separation selectivity and peak performance. In this study, two machine learning (ML) models, artificial neural network (ANN) and random forests (RF), were used to predict the efficiency of in-house synthesized chitosan-polyacrylamide copolymers (C-PAMs) in the depression of iron sulfide minerals (i.e., pyrite) while valuable base metal sulfides (i.e., galena and chalcopyrite) were floated using nine flotation variables as inputs to the models. The prediction performance of …

Mechanical Testing Data From Neutron Irradiations Of Pm-Hip And Conventionally Manufactured Nuclear Structural Alloys, Yaqiao Wu

Materials Science and Engineering Faculty Publications and Presentations

This article presents the comprehensive mechanical testing data archive from a neutron irradiation campaign of nuclear structural alloys fabricated by powder metallurgy with hot isostatic pressing (PM-HIP). The irradiation campaign was designed to facilitate a direct comparison of PM-HIP to conventional casting or forging. Five common nuclear structural alloys were included in the campaign: 316L stainless steel, SA508 pressure vessel steel, Grade 91 ferritic steel, and Ni-base alloys 625 and 690. Irradiations were carried out in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) to target doses of 1 and 3 displacements per atom (dpa) at target temperatures …

Experimental Characterization And Computer Vision-Assisted Detection Of Pitting Corrosion On Stainless Steel Structural Members, Riley J. Muehler

Master's Theses

Pitting corrosion is a prevalent form of corrosive damage that can weaken, damage, and initiate failure in corrosion-resistant metallic materials. For instance, 304 stainless steel is commonly utilized in various structures (e.g., miter gates, heat exchangers, and storage tanks), but is prone to failure through pitting corrosion and stress corrosion cracking under mechanical loading, regardless of its high corrosion resistance. In this study, to better understand the pitting corrosion damage development, controlled corrosion experiments were conducted to generate pits on 304 stainless steel specimens with and without mechanical loading. The pit development over time was characterized using a high-resolution laser …

Dissolution Rates Of Borophosphate Glasses In Deionized Water And In Simulated Body Fluid, Parker T. Freudenberger, Rebekah L. Blatt, Richard K. Brow

Materials Science and Engineering Faculty Research & Creative Works

Particles of Borophosphate Glasses with the Nominal Molar Compositions 16Na₂O-(24-Y)CaO-YSrO-XB₂O₃-(60-X)P₂O₅ (Mol%), Where 0 ≤ X ≤ 60 and Y = 0, 12, and 24, Were Reacted in Deionized Water and in Simulated Body Fluid (SBF) at 37 °C. for the Dissolution Experiments in Water, the PH of the Solution at the Conclusion of the Experiments Increased Systematically, from 2.1 to 9.5, for Y = 0 Glasses When 'x' Increased from 0 to 60. the Reaction Rates over the First 8–24 H of Dissolution in Both SBF and Deionized Water Followed Linear …