Materials Science and Engineering Commons^™

Retracted: Fabrication And Characterization Of Wood Fiber Reinforced Polymer Composites, Firoz Ahmed, Omar Faroque, Saif Hasan, Khan Rajib Hossain, Rezaul Karim Sheikh

Al-Bahir

Wood-polymer composites (WPCs) combine the properties of wood and polymers. Creating composites involves adding plant or wood fibers as fillers to a polymer matrix. This study used mahogany and mango wood sawdust as reinforcement materials, while high-density polyethylene (HDPE) and polyvinyl chloride (PVC) were used as matrices. The investigated data in this study comprises four different (10, 20, 30, and 40) weight percentages (wt%) of mahogany and mango sawdust paired with corresponding wt% (90, 80, 70, and60) of HDPE and PVC matrices. The extrusion method produced composites with different amounts of sawdust and polymer matrices. Wood polymer composites were characterized …

Mechanochemical Esterification Of Cellulose Nanofibers Lyophilized From Eutectic Water–Tert-Butanol Mixtures, Miran Mavlan, Taehoo Chang, Rudan Feng, Jake R. Wilkinson, Robert J. Nicholas, Nosa B. Idahagbon, Jeffrey Youngblood, Alexander Wei

Department of Chemistry Faculty Publications

Freeze-dried CNFs can be modified by mechanochemical (MC) processes with minimal use of auxiliary solvents, however aggregation of nanofibers during lyophilization compromises their granularity and reaction efficiency. Adding 10 wt% tert-butanol (TBA) to aqueous slurries of wood-derived CNF creates a eutectic mixture that reduces hornification during lyophilization, resulting in well-formed aerogels with minimal shrinkage in volume. CNFs lyophilized from mixtures containing at least 10 wt% TBA exhibit an order of magnitude increase in specific surface area relative to CNFs freeze-dried from water alone. The amount of TBA and input energy needed for lyophilization can be reduced considerably by dewatering …

Design, Synthesis, And Characterization Of Peptide Amphiphile Biomaterials, Huihua Xing

Theses & Dissertations

Self-assembled peptide amphiphiles (PAs) have gained significant attention in recent years due to their ability to form various supramolecular nanostructures with unique physical and chemical properties. These amphiphilic molecules consist of a hydrophobic tail and a peptide domain, allowing for the formation of nanoscale assemblies in aqueous environments. The PA supramolecular structures have a wide range of potential applications, including drug delivery, tissue engineering, and regenerative medicine.

By manipulating the driving forces (e.g., hydrophobic interactions, hydrogen bonds, and electrostatic interactions) involved in the self-assembly, researchers can tune the self- assembly properties (size, shape, stability, and surface character) and, consequently, the …

Elucidating Self-Assembly Of Semiconducting Polymers In The Presence Of A Low Molecular Weight Gelator, Madhubhashini Lakdusinghe

Theses and Dissertations

Semiconducting polymers with a conjugated backbone are important for energy storage, conversion, and biomedical field applications. The self-assembly process of these polymers in solutions depends on the polymer concentration and quality of the solvent. The electrical properties of thin films obtained from the solution phase depend on the self-assembled process. Thin films of conjugated polymer gels with percolating networks of self-assembled structures display improved electrical conductivities. In this dissertation, we studied the impact of the secondary gel matrix formed by a low molecular weight gelator, on the self-assembly of conjugated polymers, the preservation of assembled structures in dried gel films …

Development Of Preservative-Treated Cross-Laminated Timber And Lignin-Reinforced Polyurethane-Adhesive For Glued Laminated Timber, Samuel Oluwafemi Ayanleye

Theses and Dissertations

Interest in the use of mass timber in building and construction is growing worldwide, this is due to the structural integrity and reduced environmental footprint of timber-based structures. Concerns associated with the biological and environmental degradation of mass timber necessitate the development of adequate protection strategies to ensure the durability of these products. Preservative treatment is a proven technique that increases the durability and performance of wood in-service and can also be applied to large-sized timber panels such as cross-laminated timber (CLT). Therefore, this study focused on investigating the feasibility of treating prefabricated 3- and 5-layer CLT panels with Copper-azole …

Investigations Of Dual-Electrolyte Layer Protonic Ceramic Fuel Cells For Enhanced Electrochemical Performance And Longevity, Abdul-Sommed Hadi

Graduate Theses & Non-Theses

A cermet anode comprising of yttria-doped barium zirconate, BZY and nickel, Ni is now the preferred choice of materials for use in proton conducting fuel cell (PCFC) anodes because of their influence on anode oxidation kinetics. The Ni grains, being in a solid solution with the BZY support, helps improve on the catalytic activity and conductivity, in addition to the relative stability of BZY in steam and hydrocarbon reforming environments, as well as BZY’s excellent protonic conductivity.

Ni-BZY based anodes, sintered onto a ~600-micron electrolyte-supported substrates of BZY, BCZY (yttria- and ceria-doped barium zirconate), and a BZY/BCZY dual electrolyte-layer substrate, …

Leveraging Steric Moieties For Kinetic Control Of Dna Strand Displacement Reactions, Drew Lysne, Tim Hachigian, Chris Thachuk, Jeunghoon Lee, Elton Graugnard

Materials Science and Engineering Faculty Publications and Presentations

DNA strand displacement networks are a critical part of dynamic DNA nanotechnology and are proven primitives for implementing chemical reaction networks. Precise kinetic control of these networks is important for their use in a range of applications. Among the better understood and widely leveraged kinetic properties of these networks are toehold sequence, length, composition, and location. While steric hindrance has been recognized as an important factor in such systems, a clear understanding of its impact and role is lacking. Here, a systematic investigation of steric hindrance within a DNA toehold-mediated strand displacement network was performed through tracking kinetic reactions of …

Influence Of Forming Forces On Torsional, Tensile, And Compressive Deformation Of Paperboard Packages, Arvo Niini, Panu Tanninen, Juha Varis, Ville Leminen

Journal of Applied Packaging Research

Paperboard packages were tested mechanically to investigate influence of forming forces on torsional, tensile, and compressive deformation. The packages were paperboard trays which were press formed with different pressing forces and blank holder forces. Deformation of the trays was observed with torsion, compression, and tensile tests. A statistical analysis of test results was conducted to derive optimal forming forces. Increased pressing force yielded desirable deformation characteristics with the trays. Blank holder force had largest impact on the compressive deformation. Interaction of the pressing force and the blank holder force influenced the torsional and the compressive deformation. The optimal forming forces …

Thermomechanical Properties Of Neutron Irradiated Al3Hf-Al Thermal Neutron Absorber Materials, Donna Post Guillen, Mychailo B. Toloczko, Ramprashad Prabhakaran, Yuanyuan Zhu, Yu Lu, Yaqiao Wu

CAES Energy Policy Institute Faculty Publications and Presentations

A thermal neutron absorber material composed of Al₃Hf particles in an aluminum matrix is under development for the Advanced Test Reactor. This metal matrix composite was fabricated via hot pressing of high-purity aluminum and micrometer-size Al₃Hf powders at volume fractions of 20.0, 28.4, and 36.5%. Room temperature tensile and hardness testing of unirradiated specimens revealed a linear relationship between volume fraction and strength, while the tensile data showed a strong decrease in elongation between the 20 and 36.5% volume fraction materials. Tensile tests conducted at 200 °C on unirradiated material revealed similar trends. Evaluations were then …

Fatigue And Fracture Of Electron Beam Melting Ti-6al-4v, William A. Grell

Electronic Theses and Dissertations

For applications in the aerospace field, selection of materials for a given design requires an understanding of critical properties, like fatigue and fracture, in addition to static mechanical and physical properties. With the ongoing advancements in metallic additive manufacturing techniques and the interest in applying the process to aerospace applications, there is a clear need to fully characterize properties. Arguably, the most attractive alloy for applications in aerospace is the Ti-6Al-4V alloy. The current dissertation examines the mechanical properties of the alloy, made by the Electron Beam Melting (EBM) Powder Bed Fusion (PBF) method. As illustrated in this work, the …

A Transport Property-Based Assessment Of Triple Ionic-Electronic Conductors As Cathodes For Protonic Ceramic Fuel Cells, Jack Harrison Duffy

All Dissertations

Triple ionic-electronic conductors (TIECs) are a widely studied class of materials for electrodes in ceramic electrochemical devices such as protonic ceramic fuel cells. These ceramics are perovskite-based and exhibit concurrent conductivity of protons, oxide ions, and electrons at elevated temperatures. Despite their numerous references in literature, few studies have systematically probed the fundamental surface- and bulk-level properties of TIECs. In this dissertation, dopant levels are systematically altered in the BaCo_0.4Fe_0.4Zr_0.1Y_0.1O_3-δ-type perovskite TIEC to reveal the effects on structure, transport properties, and durability of each material. The results of this work …

Glass Bubbles Grafted With Polymer Brushes For Liquid Hydrocarbon Fire Extinguishment, Randall Snipes

All Dissertations

The current most efficient solution to fighting liquid pool fires involves the use of firefighting foams containing fluorinated surfactants. The physiochemical properties of these foams are considerably different to all other currently available firefighting foams. Fluorinated surfactants lower the surface tension to a point where the foam solution draining from the foam structure forms a continuous aqueous film on the surface of a volatile hydrocarbon fuel, adding an additional barrier to fuel vapor diffusion to the burning fire. For this reason, these foams qualify as aqueous film forming foams (AFFFs). However, fluorinated compounds are extremely harmful for the environment due …

Life Cycle Energy Assesment Of Advanced Fiber Reinforced Composite Design And Manufacturing Methodologies, Urjit Lad

All Theses

Automotive industry at large is focused on vehicle light-weighting since a 6%-8% increase in fuel efficiency can be achieved with a 10% reduction in vehicle weight [1]. With the growing demand for cost-effective and sustainable light weighting of automobile structures, interest has increased in the application of fiber reinforced plastic (FRP) composites for use in the Body-in-White (BiW), which can account for up to 40% of the total vehicle weight. Traditional FRP composite manufacturing processes like vacuum assisted resin transfer molding, autoclave consolidation or use of automated fiber placement have been successfully used for marine and aerospace applications. However, these …

Oxidation Of Hafnium Diboride—Silicon Carbide At 1500 °C In Air; Effect Of Compressive Stress, Anthony J. Degregoria, Marina B. Ruggles-Wrenn, Glen E. Pry

Faculty Publications

The long-term oxidation behavior of HfB₂ and of HfB₂-20 vol.% SiC was studied. Test samples of each material were oxidized at 1500 °C in air using a box furnace. The exposure times were 0, 0.5, 1, 2, 3, 6, 9, 12, 15, 30, 45 and 90 h. Weight gain, oxide scale composition and oxide scale thickness were characterized for both materials. Crystal structure of the surface scales was analyzed using x-ray diffraction. Oxide scales were further characterized via scanning electron microscopy with energy dispersive spectroscopy analysis. For HfB₂ the oxide scale consists predominantly of porous HfO …

Multiscale Modeling And Gaussian Process Regression For Applications In Composite Materials, Joshua Arp

All Dissertations

An ongoing challenge in advanced materials design is the development of accurate multiscale models that consider uncertainty while establishing a link between knowledge or information about constituent materials to overall composite properties. Successful models can accurately predict composite properties, reducing the high financial and labor costs associated with experimental determination and accelerating material innovation. Whereas early pioneers in micromechanics developed simplistic theoretical models to map these relationships, modern advances in computer technology have enabled detailed simulators capable of accurately predicting complex and multiscale phenomena.

This work advances domain knowledge via two means: firstly, through the development of high-fidelity, physics-based finite …

Electrosteric Control Of The Aggregation And Yielding Behavior Of Concentrated Portlandite Suspensions, Sharu Bhagavathi Kandy, Narayanan Neithalath, Mathieu Bauchy, Aditya Kumar, Edward Garboczi, Torben Gaedt, Samanvaya Srivastava, Gaurav Sant

Materials Science and Engineering Faculty Research & Creative Works

Portlandite (calcium hydroxide: CH: Ca (OH)2) suspensions aggregate spontaneously and form percolated fractal aggregate networks when dispersed in water. Consequently, the viscosity and yield stress of portlandite suspensions diverge at low particle loadings, adversely affecting their processability. Even though polycarboxylate ether (PCE)-based comb polyelectrolytes are routinely used to alter the particle dispersion state, water demand, and rheology of similar suspensions (e.g., ordinary portland cement suspensions) that feature a high pH and high ionic strength, their use to control portlandite suspension rheology has not been elucidated. This study combines adsorption isotherms and rheological measurements to elucidate the role of PCE composition …

Synthesis And Characterization Of Cobalt(Iii) Complexes And A Vanadium(Iv) Complex With Flavonoids As Ligands, Ethan Schroeder

Chemistry & Biochemistry Theses & Dissertations

For many years now, transition metal complexes have been used as favorable additional chemotherapeutic approaches to medicine that were previously unexplored in the literature. One well-known chemotherapeutic drug, cisplatin, has been applied, but is limited in use due to its toxicity to the cells and its undesirable side effects to humans. Newly developed cobalt-based complexes with ligands known as flavonoids are being used to fight cancer. Flavonoids, compounds mainly found in fruits and vegetables, are shown to have antioxidative and anticancer properties. Use of flavonoids as ligands in transition metal complexes, e.g., those with a Ru(II) metal center, have been …

Integrating Sensor Development, Risk Assessment, And Community Engagement To Support Environmental Justice In The Rural Community Of El Tiple, Colombia, David Bahamon Pinzon

All Dissertations

In Colombia, ethnic communities have traditionally been responsible stewards of natural resources. They recognize the importance of these resources for their livelihood, as well as their ancestral and cultural heritage. El Tiple, a rural Afro-Colombian community, has been affected by the incursion of private corporations that promoted the expansion of sugarcane monocrops in their territory. Since the introduction of the monoculture industry, local freshwater sources have been depleted due to intensive water use for irrigation of the sugarcane crops. Additionally, the intensive usage of agrochemicals has been linked with loss of native flora, damages to family farms, and pollution of …

Double Cantilever Beam Mode-I Testing Validation In Large-Scale Additive Manufacturing Carbon Composite, Luis Alfonso Camacho

Open Access Theses & Dissertations

Testing for mechanical properties for additive manufacturing has been based on already existing standards for traditional manufacturing methods. For composites in large scale additive manufacturing there is a research gap in bond strength and fracture toughness for a single layer interface. By using Double cantilever beam Mode I, this thesis manuscript validates testing parameters and protocols to describe the intricacies of ABS matrix 20 wt.% carbon filled composite, specifically on the layer-to-layer interface. Studies suggest that fracture toughness is sensitive to process parameters, like deflection speed and sharpened crack tip at the layer interface of BAAM 3D printed part and …

Effect Of Heat Treatment On The Mechanical And Corrosion Properties Of The Cocrnifeal Heas, Ahmed Korra

Masters Theses and Doctoral Dissertations

High entropy alloys (HEAs) are a relatively new class of metallic materials that have shown great potential for use in extreme environments, such as high temperatures and corrosive conditions. Among the different types of HEAs, CoCrNiFeAl HEAs are potential materials for a wide range of applications, including aerospace, biomedical, and energy storage. This work focused on the effects of heat treatment temperatures from 800 °C to 1100 °C on the microstructure and mechanical properties of these alloys, as well as their electrochemical corrosion behavior. A thermodynamic model was implemented to predict the performance of the material. The results of this …

Magnesium-Based Nanocomposites: A Review From Mechanical, Creep And Fatigue Properties, S. Abazari, A. Shamsipur, H. R. Bakhsheshi-Rad, J. W. Drelich, J. Goldman, S. Sharif, A. F. Ismail, M. Razzaghi

Michigan Tech Publications

The addition of nanoscale additions to magnesium (Mg) based alloys can boost mechanical characteristics without noticeably decreasing ductility. Since Mg is the lightest structural material, the Mg-based nanocomposites (NCs) with improved mechanical properties are appealing materials for lightweight structural applications. In contrast to conventional Mg-based composites, the incorporation of nano-sized reinforcing particles noticeably boosts the strength of Mg-based nanocomposites without significantly reducing the formability. The present article reviews Mg-based metal matrix nanocomposites (MMNCs) with metallic and ceramic additions, fabricated via both solid-based (sintering and powder metallurgy) and liquid-based (disintegrated melt deposition) technologies. It also reviews strengthening models and mechanisms that …

Preparation Of High Entropy Titanite Pyrochlore And Radiation Stability Study, Adam Gootgeld

All Theses

Pyrochlore has been studied as a host phase for safe storage of radionuclides and exists naturally with long-term stability with good long-range order [1]. High entropy oxides show promising tunable properties that could demonstrate favorable bulk deposit of radioactive materials such as spent nuclear fuel (Uranium and other actinides). It is proposed that using high entropy oxides (HEOs) as the cation in this framework will shift the gibbs free energy so that radioactive nuclear waste will be stabilized for safe, long-term, eco-friendly storage. We have established a consistent method to fabricate high entropy titanite pyrochlores. In this study, ion beam …

Computational And Experimental Study On Undoped And Er-Doped Lithium Tantalate Nanofluorescent Probes, Mkhitar A. Hobosyan, Andrea Pelayo Carvajal, Bhupendra B. Srivastava, Tamanna Zakia, Mohammed Uddin, Karen S. Martirosyan, Eric Rodriguez, Kofi Nketia Ackaah-Gyasi, Nicholas Dimakis

Physics & Astronomy Faculty Publications

We present a combined density functional theory (DFT) and experimental work on lithium tantalate LiTaO3 (LT) and its Er-doped counterparts. We calculate the electronic and optical properties for both LT and LT:Er+3, with Er occupying either Li or Ta sites, at 4.167 mol%. The generalized gradient approximation (GGA) calculations show that the Er-4 f bands appear closer to the conduction band bottom and to the valance band top, for the first and second doped configurations, respectively. This agrees with changes in the imaginary part of the frequency dependent dielectric function between the doped configurations. There are striking differences between the …

Characterization Of Mechanically Recycled Polylactic Acid (Pla) Filament For 3d-Printing By Evaluating Mechanical, Thermal, And Chemical Properties And Process Performance, Mahsa Shabani Samghabady

All Theses

Polylactic acid (PLA) is a biopolymer made from renewable resources such as sugar and corn. PLA filament is a popular material used in Fused Deposition Modeling (FDM) 3D-printing. While this material has many advantages, all the failed parts, support structures, rafts, nozzle tests, and the many prototype iterations during the 3D-printing process contribute to the plastic pollution and release of greenhouse gases. Although PLA is biodegradable, it can take years to degrade in landfills. Instead of throwing away PLA waste and buying new filaments, PLA can be recycled. Amongst the different recycling technologies, mechanical recycling is the most environmentally friendly. …

Photophysical Studies Of Electronic Structure And Excited-State Dynamics Of Dna-Templated Cyanine Dye Aggregates, Jonathan Samuel Huff

Boise State University Theses and Dissertations

The invention and widespread adoption of the digital computer in the last century has led to an era of rapid technological advancement that has continued to the present day. This advancement has been sustained to a large degree by continued miniaturization of the electronic components in microprocessors, which results in increased computing power and energy efficiency. In recent years, this strategy has produced diminishing returns because the cost for each incremental size reduction increases as engineers approach the fundamental scaling limits of silicon-based semiconductor devices. Meanwhile, breakthroughs in DNA nanotechnology hold great promise for a new generation of self-assembled nanodevices …

Transformation Pathways Of Lanthanide-Free Mn-Al-Ga-X Alloys Where X = Co, Fe, And Ni, Shane L. Palmer

Boise State University Theses and Dissertations

Ubiquitous rare-earth, (i.e. lanthanide) permanent magnets (PMs) composed of Nd-Fe-B are the strongest PMs on the market. However, limited mineral sources, complex elemental separation, and supply chain volatility have shifted the lanthanides to critical material status. Inexpensive, readily available materials are sought to fill an energy product performance gap to reduce dependency on lanthanide PMs. Frequently, lanthanide PMs are used in applications where their energy products are excessively high. Mn-Al based permanent magnets offer a potential substitute for PM applications which do not require the high energy product of a lanthanide PM. MnAl alloys form a metastable ferromagnetic tetragonal …

Poly(Alkyl Aldehyde)S: A New Class Of Closed-Loop Recyclable Plastics, Kyle Arnold Nogales

Boise State University Theses and Dissertations

This dissertation will describe a new class of closed-loop recyclable, self-immolative polymers that undergo selective, complete, and rapid depolymerization in the solid state when triggered. Self-immolative poly(alkyl aldehyde)s are synthesized efficiently in approximately 60% yield using anionic polymerization, which provides access to polymers in accessible lengths ranging from short (M_n value of 2 kDa) to long polymers (M_n value of 5,000 kDa). The physical and thermal properties of the polymers can be tuned rationally by appropriate choice of the aldehyde monomer, with some of the polymers displaying mechanical properties that are similar to traditional plastics. The polymers depolymerize …

Development And Characterization Of Lead & Lead-Free Perovskite Solar Cell Materials, Rubaiya Murshed

UNLV Theses, Dissertations, Professional Papers, and Capstones

In recent years, perovskite photovoltaic technology has offered enormous viability and dimensionality in solar cell research. As a light-harvesting active layer, Perovskite generated remarkable development in device efficiency of 25.7% for the single-junction solar cell, and over 33% for the perovskite/silicon tandem solar cell. Also, perovskite-perovskite tandem solar cell (also called all-perovskite tandem solar cell) shows great potential in device performance and achieved a power conversion efficiency (PCE) of 26.4%. Transitioning photovoltaic technology from the laboratory to commercial products, high PCE, low cost, long lifetime, and low toxicity are some of the critical factors to consider during material selection. Pb-halide …

Carbon Fibers From Athabasca Oil-Sand Asphaltenes, Blake Reardon

All Theses

Carbon fibers possess ultra-high specific strength and modulus. Therefore, the material is popular in aerospace, automotive, and sports industries. Approximately 95% of all carbon fibers are spun from a high-cost precursor, polyacrylonitrile (PAN). There is a need for a cheaper grade of carbon fiber for low-cost applications because about half of carbon fiber cost is associated with precursor cost. A promising alternative to the high-cost PAN precursor is petroleum-based asphaltene. Asphaltenes are highly aromatic and have a high carbon content but lack the purity of the PAN precursor. Processes like the molten- sodium desulfurization upgrading have been used to harvest …

Processing, Microstructure, And Properties Of Alumina Ceramics And Silica Glass During Laser Selective Additive/Subtractive Manufacturing, Xiao Geng

All Dissertations

The heterogeneous structure is essential to obtain excellent performance in many ceramics or glass devices/components. Conventional fabrication on these heterogeneous structure composites usually requires multiple treatments, specific molds for certain structures, and post-processing to get desired structure and properties. Therefore, the flexibility of the structure is limited, and a long fabrication time is required.

Integrated additive/subtractive manufacturing and laser-based technologies have caught researchers` attention in ceramics/glass heterogeneous structure fabrication. This is because the integration of additive manufacturing (AM) with subtractive manufacturing (SM) not only maintained the advantages of AM in rapid prototyping, design complexity, and reduced material wastage but also …