Materials Science and Engineering Commons^™

Electrolysis Of Molten Mixtures Of Galena And Lead Chloride., Donald Q. Cole

Bachelors Theses and Reports, 1928 - 1970

Electrolysis of molten mixtures of lead chloride and galena was carried out under various conditions of temperature, time, composition, and current densities; without a diaphram, and with various diaphrams. Continuous runs, with necessary additions of lead sulfide and lead chloride to maintain a melt of the proper composition, were attempted on a small scale.

A Study Of The Effect Of Third Metals On The Wetting Properties Of Solders, William L. O'Brien

Bachelors Theses and Reports, 1928 - 1970

Solders are not new alloys, since they were known in late Roman times when they were mentioned by Pliny. These solders differed very little from our modern ones. Tertiarium, consisting of one part of tin to two parts of lead, is known today as plumbers solder; and argentarium, consisting of equal parts of lend and tin, is still extensively used for many purposes.

Geology And Ore Deposits Of The Clinton Mining District, James F. Piquette

Bachelors Theses and Reports, 1928 - 1970

This report includes the results of geological investigation of the Clinton Mining District and the Hidden Treasure Mine.The Clinton Mining District is an unorganized mining dis­trict situated in the Garnet Range two and one-half miles northeast of the town of Clinton, Montana, which is on the Northern Pacific Railway and the Chicago_, Milwaukee, St. Paul, and Pacific Railroad seventeen miles east of the city of Missoula.

The district is in the same range of mountains as the Gar­net Mining District and the drainage from the district covered is to the south into the Hell Gate or Clarks Fork of …

The Testing And Concentration Of A Tungsten Ore, Turdat S. Simone

Bachelors Theses and Reports, 1928 - 1970

At the present time the principal uses for tungsten lie in the manufacture of ferro-alloys and tungsten steels. Due to it’s hardening and strengthening characteristics it holds an important position among steel hardening metals. The great rush for it’s production during the World War years clearly points to it’s importance in the manufacture of armament.

Report On The Ermont Mine Sec. 35, T. 6 S., R. 11 W., Beaverhead County, Montana, Chester Harkins Steele

Bachelors Theses and Reports, 1928 - 1970

An examination of the Ermont Mine was requested by the owners, Messrs. J. R. Bowles and R. B. Caswell, to determine the amount and grade of ore developed, the advisability of constructing a mill at the present time, and to recommend future development work.

The Age-Hardening Of Magnesium With Aluminum And Zinc, K. Deatley Loughridge

Bachelors Theses and Reports, 1928 - 1970

Magnesium is one of the most active elements and forms oxides, nitrides, and carbides, but not hydrides. Due to its activity, low melting point, low strength when unalloyed, and the difficulty with which it is worked, magnesium has not been and is not at present well developed.

A Study Of Eutectics Of Certain Fused Salts, William D. Trethewey

Bachelors Theses and Reports, 1928 - 1970

Considerable work has been done investigating the freezing point curves of fused salts, but little has been written describing the appearance of their eutectic structures when observed under the microscope.

Report On Pole Canyon Area And Area Three Miles Southeast Of Jefferson Island, Ted Newcombe

Bachelors Theses and Reports, 1928 - 1970

The primary purpose of the trip was to acquaint the students with some of the problems that occur in the field, and also how to make geologic maps of sections, outcrops, faults, and other geologic features of the earths surface.

The Geology Of The Limespur-Sappington Area, Frank W. Archibald

Bachelors Theses and Reports, 1928 - 1970

The area to be surveyed was divided up into sections add each crew of three or four members was assigned one of these sections. The first two days were spent in studying and mapping the geologic section in the South Boulder Canyon where we obtained practice in alidade surveying, brunton, pacing, and auto traverse.

X-Ray Data Concerning Some Manganese-Copper Alloys, George Lester Mitsch

Bachelors Theses

"Until recently the only commercial method of producing metallic manganese in large ammounts sic was a pyrometallurgical process. Producing a metal of about 97% purity, it was not very satisfactory. With the advent of a process for producing a metal of 99.9 plus % purity electrolytically, introduced by the United States Bureau of Mines, for the first time was there a sufficient quantity of pure manganese available for alloy use. The manganese-copper system was chosen for study because of the inconsistencies in the reports of previous investigators, and because of the properties alloys of these components possess, such as magnetism, …

A Study Of Opacity Produced By Insoluble Refractory Opacifiers, Theodore J. Planje

Bachelors Theses

"To investigate opacification produced by insoluble, refractory opacifiers in an effort to obtain some knowledge and reliable data concerning the electrical charge on the particles - its quality and quantity, and the effect of heavy metallic ions upon the flocculation and deflocculation of the opacifying particles"--Object, page 1.

Firing Behavior Tests And Other Tests On A Missouri Stoneware Clay To Determine Its Commercial Possibilities, Ivan Martin Niedling

Bachelors Theses

"A clay's essential character is its plasticity, whether it is to be used for common brick purposes, the manufacture of refractory articles, or merely as a bonding agent for nonplastic materials. Plasticity is a very large subject; there are many theories as to its cause and many methods have been developed to record it, but so far no satisfactory quantitative measure of plasticity has been found. Perhaps the most satisfactory method is to judge by handling the clay, and with constant practice one can become expert in judging the plasticity of a clay by its feel. Such a method is, …

Red Glazes, Sidney Austin Peer

Bachelors Theses

"Red glazes are extremely difficult to produce on pottery except at relatively low temperatures, or under conditions which can only be regarded as largely accidental. For many years ceramists have demanded a red glaze maturing at cone 4. To produce this glaze, much time and research is required...The object of this study was to produce a commercial red glaze at cone 4 from different oxides in a base glaze of white lead and silica"--Scope of Investigation, pages 1, 7.

The Bloating Of Clays, Everett Walter Sharp

Bachelors Theses

"The effect of firing on clays in relation to volume is either a shrinkage, bloating, or no change whatso-ever. The reason for the shrinkage and the constant volume is well known, but the cause of the bloating has not as yet been determined. In some instances, as the use of fire clay brick in steel ladles, this property of bloating is desirable to a certain extent because this packs the brick lining in the ladle tightly after the first heat is poured in, and prevents the brick lining from floating out when the metal is poured. There is little or …

The Effect Of Clays On The Properties Of Masonry Cement, William Joseph Smothers

Bachelors Theses

"Portland cement is not a material of great antiquity. It was discovered only a little over a century ago and quite by accident. It has been the custom in the manufacture of hydraulic limes to heat argillaceous limestones to temperatures not greatly above that at which the carbon dioxide would be liberated, but this process was carried out in a stack furnace under conditions such that some parts of the material were heated to temperatures which produced sintering. These hard lumps of sintered material were discarded because they were so much more difficult to grind than the unsintered However, in …

The Production Of High Alumina Refractories Bonded With Lumnite Refractory Cement, Joseph Lewis Hoffman

Bachelors Theses

"Users of refractories are constantly demanding a better product. There is a demand for a satisfactory neutral or basic refractory with a P.C.E. equivalent of cone 35 or better. A refractory with a very high alumina content would seem to solve this problem, however, the main difficulty has been to bond the unplastic alumina. From the literature it was learned that Lumnite cement has been satisfactory in the manufacture of a refractory concrete. Therefore this investigation was carried out to determine the adaptability of bonding corundum with Lumnite"--Introduction, page 1.

The Quantitve Measurement Of Amalgamation, Robert A. Mcguire

Bachelors Theses and Reports, 1928 - 1970

Mercury has been known since ancient times. In fact, one mine, the "Almaden" in Spain, has been worked continuously since Roman times. It has been used during all this time for the recovery of free gold from gold concentrates, and from black sand and galena in concentrates from placer work.

Fauna Of The Three Forks Formation In Montana, Will Mitchel Jr.

Bachelors Theses and Reports, 1928 - 1970

The purpose of this paper is to identify and describe the fauna, correlate it with that of the Upper Devonian of other states, to note the geographic distribution, lithologic variations of outcrops, and to compare measured cross sections.

Constitution And Properties Of Manganese-Copper Alloys, James Harrison Jacobs

Masters Theses

"This work was undertaken because of the recently revived interest in the use of manganese as an alloying element. This revival of interest has been mainly due to the development of the process for electro-deposition of manganese by the U. S. Bureau of Mines. Prior to the work of the bureau of Mines there was no commercial source of high purity manganese. Manganese made by the electrolytic process contains less than .03% impurities, while manganese made by other methods contains as high as 3% impurities. The use of high purity manganese as a base for alloys should open up an …

Montana Oil Fields, Conrad F. Lundgren

Bachelors Theses and Reports, 1928 - 1970

Since the discovery of oil in Montana in1916, the petroleum industry has advanced to a point where over 5,000,000 barrels of oil worthover $6,500,000 has been produced in each of the three past years (1936, 1937, and 1938).

The Age Hardening Of Silver With Copper-Silicide, Joseph Edward Shaw

Bachelors Theses and Reports, 1928 - 1970

The successful application of the phenomenon of pre­cipitation hardening to aluminum and copper has indicated the possibility of hardening all metals in the same way. The phenomenon of age hardening was discoveredin 1911, and since that time much research has been car­ried on in all parts of the world on various alloy sys­tems.

Structure Of Eutectics, Dilip K. Das

Bachelors Theses and Reports, 1928 - 1970

The present paper is a result of work done on the study of structures of eutectics of a certain eutectic-forming binary systems. In this research work no systems with intermetallic compounds have been studied.

Investigation Of A Method For Extraction Of Indium From Zinc Flue Dust., Harold L. Tanner

Bachelors Theses and Reports, 1928 - 1970

In metallurgical practice today some of the relatively rare metal Indium is recovered as a by-product from the ores of other metals. Indium is a soft, silvery—white metal belonging to the third group of the periodic classification. It is situated just above tin in the electrochemical series.

A Study Of Solders, John D. Prater

Bachelors Theses and Reports, 1928 - 1970

The purpose of this paper is to furnish a qualitative method of comparing the degree of wetting of various solders upon different plate metals when several fluxes are used.

The Pre-Jurassic Surface Of Montana., G. Fay

Bachelors Theses and Reports, 1928 - 1970

It has long been known that, prior to the deposition of Jurassic sediments, Montana was subjected to an intensive period of erosion. Mention of this may be found in numerous reports, especially those dealing with western Montana.

Electrolytic Manganese, George T. Derana

Bachelors Theses and Reports, 1928 - 1970

The production of metallic manganese by electrolysis is of potential value for the recovery of this strategic metal from domestic deposits. These deposits are largely unsuitable for the production of ferromanganese, but they are amenable to low-cost leaching processes.

Igneous Rocks Of The Jardine And Crevasse Mountain Mining Districts., Ray E. Gilbert

Bachelors Theses and Reports, 1928 - 1970

It is surprising to learn that so large a variety of igneous rocks is present in the Jardine and Crevasse Mountain mining districts, a region that is generally thought of as consisting principally of schists.

The Age Hardening Of Copper With Manganese Silicide., Gordon A. Davis

Bachelors Theses and Reports, 1928 - 1970

The increase in hardness is attributed to the manganese silicide being precipitated from solid solution and deposited between crystal planes. The subsequent softening which occurs on prolonging the period of reheating is believed to be due to an agglomeration of the dispersed hardening agent.

Geology Of The Golden Sunlight Mine And Vicinity, Roy H. Earhart

Bachelors Theses and Reports, 1928 - 1970

The Golden Sunlight Mine is in the northern part of the Cardwell mining district on the eastern slope of a small range that rises by a series of benches to an elevation of 7,200 at a point five miles east of the town of Whitehall in Jefferson County.

Powder Metallurgy, Cecil R. Waldron

Bachelors Theses and Reports, 1928 - 1970

The metal powders may be produced in a number of different ways. In metals where the intercrystalline material is brittle enough, they may be ground in a ball mill or eddy mill. The fineness of such a powder is more or less controlled by the grain size of the original metal.