Electrical and Electronics Commons^™

Conditioning Hierarchical Diffusion Transformers On Rf Circuit Parameters, Ethan Morton

McKelvey School of Engineering Graduate Student Theses & Dissertations

As modern ML techniques have become increasingly advanced, they have begun to be integrated into wireless RF systems for classification, identification, and spectrum management. Deep Neural Networks (DNNs) enable RF system operators and designers to design more flexible systems with greater robustness to errors and attacks. However, neural networks require significant amounts of properly annotated data to train. Current data labeling methods lack the ability to obtain reliable true labels for circuit properties such as carrier frequency offset (CFO), power amplifier (PA) non-linearity, and in-phase/quadrature (IQ) imbalance. This thesis investigates the efficacy of a novel architecture, RF-Diffusion, for generating high-quality …

Data-Driven Multimodal Mri Representation Learning For Subtype Discovery And Disease Progression Modeling In Parkinson’S Disease, Zihan Zhou

McKelvey School of Engineering Graduate Student Theses & Dissertations

Parkinson’s disease (PD) exhibits substantial clinical and neuroanatomical heterogeneity, limiting robust patient stratification and clinically meaningful progression modeling from MRI. We propose a unified multimodal 3D generative representation-learning framework that learns an interpretable latent space from co-registered baseline T1/T2 MRI with an edge-aware channel. Confound-corrected latent embeddings support unsupervised subtype discovery, while disease duration provides weak supervision to orient a continuous progression axis. On an independent external cohort (PPMI, N=171), the discovery-trained subtype structure shows significant partial replication (ARI=0.35; permutation test p=0.001) and enables longitudinal clinical stratification: mixed-effects modeling reveals subtype-dependent MDS-UPDRS III progression, with the strongest effect in subtype …

The Pid-Based Three Quadcopter Uavs Formation Control Under External Disturbance, Vo Van An, Trinh Luong Mien

Makara Journal of Technology

This paper presents the design and evaluation of a formation control strategy for three quadcopter UAVs, based on a PID controller in a leader–follower structure, under the influence of external disturbances. Each UAV employs a six-degree of-freedom dynamic model and utilises a cascade PID control architecture, in which the inner control loop stabilises the attitude. In contrast, the outer control loop regulates position and maintains the formation. The PID parameters are tuned using the Ziegler–Nichols method to ensure simple implementation and low computational cost. The performance of the control system is evaluated through simulations in the MATLAB environment for two …

Piano Aid, Christopher G. Sayers, Tyler Baugus, Gabby Taunton

Create@State

Pianos provide recreational and educational value and is a cornerstone of the culture experienced worldwide today. Despite the many benefits and enrichment music brings these benefits are often inaccessible or difficult to learn by most people but especially to those of the Deaf and Hard of Hearing (DHH) community due to its innate auditory nature. While adaptive instruments have been proposed to address this gap, many remain conceptual or fail to reach production because of high development costs and limited commercial markets. This project presents an economically feasible alternative in the design of an adaptive digital piano that enables both …

Implantable, Sensor-Embedded Vascular Graft Towards Wireless Monitoring Of Stenosis, Nnamdi Dike

LSU Master's Theses

Arteriovenous (AV) grafts are commonly used to provide vascular access for hemodialysis in patients with end-stage renal disease. Despite their widespread use, AV grafts are prone to complications such as stenosis and thrombosis. Early detection of these conditions remains challenging with current monitoring methods too costly or insufficient. This work presents the design, fabrication, and validation of an LC pressure sensor embedded within a model AV graft to enable real-time monitoring. The proposed system integrates a parallel-plate capacitive pressure sensor with a spiral inductor to form an LC circuit embedded within an elastomeric graft wall. The Ecoflex 00-30 dielectric layer …

Developing A Multi-Band Gnss Remote Sensing Station To Measure Precipitable Water Vapor For Flash Flood Nowcasting, Madison Gleydura

Doctoral Dissertations and Master's Theses

Flash flood nowcasting in Central and Southern Appalachia is particularly challenging due to steep terrain, narrow valleys, highly localized rainfall patterns, and limited measurement coverage. Traditional remote sensing methods, such as Doppler radar and microwave radiometry, suffer from reduced resolution at long range and signal blockage by mountains. GNSS-meteorology offers an established alternative for measuring precipitable water vapor and is currently integrated into several numerical weather models. Recent research demonstrates that commercial-grade GNSS receivers can produce tropospheric products comparable to those from geodetic-grade equipment. The gaps in mountain coverage can be addressed by developing a low-cost, self-contained embedded system that …

Control And Stability Analysis Of Three-Phase Grid-Connected Inverters In Renewable Energy Systems, Yasser Ayeva

Electrical Engineering and Computer Science Faculty Publications and Presentations

The increase in demand for renewable energy sources such as solar and wind systems has led to widespread use and integration of a three-phase grid connected inverters in electric modern electric power systems. The inverters are essential to convert DC power into AC power and to control the delivered power to the grid. However, the use of the inverters in a renewable energy system has some challenges related to stability and control due to the presence of power electronic interfaces and filter dynamics. This paper analyzes the control and stability of three phase grid connected inverter through an LCL filter. …

Tuning And Performance Of Pid Controlled Low Complexity Systems, Timothy Evans

Honors Theses

Proportional integral derivative (PID) controllers are used for precise position and orientation control in systems such as autonomous underwater vehicles (AUVs). This project supports the University of Southern Mississippi’s (USM) Robotics Club’s RoboSub AUV effort by developing, troubleshooting, and manually tuning PID controllers to characterize tracking performance and settling time across systems of increasing complexity. Initially, the project hypothesized that tracking performance would be reduced and settling times would increase as system complexity advanced from one degree-of-freedom (DOF) to two DOF. However, prior research was found that suggests that for small disturbances around an equilibrium state, separate PID-controlled DOFs can …

Millimeter Wave Channel Modeling In Shipboard Environments, Patrick Morris

Theses and Dissertations

The millimeter wave (mmWave) band has been increasingly studied in recent years due to the saturation of other common frequency bands and the need for higher data rates for current and future communications systems. In this thesis, we quantify key channel parameters for mmWave channels in several environments, including an office setting, an indoor corridor, outdoor areas near a large building, and two shipboard environments. Using a center frequency of 30.5 GHz and signal bandwidth of 500 MHz, we quantify path loss and delay dispersion. The shipboard environments are a focus due to their novelty. Measurements were made using a …

Condition Monitoring Of Induction Motor Using Motor Current Signature Analysis, Francis Ikechukwu Obianke, Joseph Okhaifoh, Benjamin Akinloye

Al-Bahir

Induction machines serve as the cornerstone and driving force of modern manufacturing and production systems. This research aims to monitor and analyse the operating performance of induction motors using motor current signature analysis (MCSA). MCSA is employed to process the current signal of a motor into a frequency spectrum, known as the current signature by applying the Fast Fourier Transform (FFT) algorithm. The underlying principle is that vibration generated in a motor is closely related to the changes of the magnetic field density, and the induced voltage varies with the stator current.

A simulation model replicating the behaviour of an …

An Interpretable Hybrid Deep And Reinforcement Learning Paradigm For Glioma Prognosis, Renuga Devi M Ms

Theses and Dissertations

Brain tumors are highly aggressive and lethal types of cancer, particularly gliomas. These cancerous growths show complicated pathophysiological behaviours and with poor prognosis despite therapeutic advances. Due to their biological differences and infiltrating growth, as well as overlapping radiological characteristics, they pose great difficulty in diagnosis, grading, and survival prediction. Artificial intelligence technology, which includes machine learning , deep learning, and reinforcement learning has developed into a new paradigm for the automation of brain tumor diagnostics and personalized treatment. The main goal of this study is to create an integrated AI-based framework that can perform brain tumor segmentation, grading and …

Enhanced Cuckoo Search-Based Optimization For Single Distributed Generation Placement And Sizing In Radial Distribution Systems, Samson Oladayo Ayanlade, Abdulrasaq Jimoh, Richard Oladayo Olarewaju, Ignatius Kema Okakwu, Israel O. Adejumobi, Joseph B. Samson, Oluwadare A. Adebisi, Oluwadare O. Akinrogunde

Al-Bahir

This paper presents an Enhanced Cuckoo Search Algorithm (ECSA) to optimally place and size Distributed Generation (DG) in radial distribution systems to minimize real power loss within operating constraints. The proposed ECSA has exponentially decaying adaptive Lévy flights, constraint-aware solution repair with dynamic penalty coefficients, and diversity-directed stochastic replacement to enhance search robustness and convergence speed. It was tested with 30 independent runs on the IEEE 33-bus, IEEE 69-bus, and a practical Nigerian 32-bus distribution network. The simulations show that the ECSA lowers the active power loss of the IEEE 33-bus system from 201.58 kW to 102.75 kW (49.03%), and …

Voltage-Mode Driver With Sar-Based Termination Calibration, Moustafa M. Elsayed, Abeer T. Khalil, Sameh A. Ibrahim, Mohy Eldin A. Abo-Elsoud

Mansoura Engineering Journal

This paper introduces a DAC-based four-level pulse-amplitude modulation (PAM-4) driver capable of operating at data rates up to 80 Gb/s in 65-nm CMOS technology. A replica-based termination calibration loop is proposed to preserve driver linearity across process, voltage, and temperature (PVT) variations. The proposed driver achieves a relative level mismatch (RLM) of 99.3%. In addition, the transmitter demonstrates a vertical eye opening of 134.8 mV and a horizontal eye opening of 0.44 UI under worst-case conditions.

Polymer Microstructures For Advanced Biomanufacturing, Tongyao Wu

LSU Doctoral Dissertations

With the continued growth of the biopharmaceutical industry, the demand for scalable, robust, and resource-efficient platforms for large-scale mammalian cell culture is amplified. Recent developments in microfluidic technology, such as precise control of the microenvironment, showed the potential to improve the performance of cell culture systems. However, constrained by scalability and operational efficiency, applying such approaches to large-scale cell culture and biopharmaceutical production presents challenges. This dissertation addresses these challenges through three independent but conceptually related technological developments. First, a roll-to-roll (R2R) fabrication process was developed for the scalable production of hollow microcarriers (HMCs). HMCs provide three-dimensional microenvironments suitable for …

Best Practices For Electrical Safety At Home, Joshua Henderson, Derek Centrone

Student Research Symposium (SRS)

The household, although it’s a comfortable and relaxing environment, can in fact be riddled with everyday hazards that homeowners and residents overlook or are too complacent in acknowledging or even recognizing their presence. One such common oversight is electrical hazards. This may be due to the high usage of electricity in people’s day-to-day lives, especially since the perceived risk of electrical hazards by the public can be very low. In a household, there are many hazards present each and every day. One such hidden deadly hazard is electricity. While on the surface it doesn’t seem that dangerous, in reality, it …

Reducing Range Anxiety Through Predictive Modeling Of Ev Battery Degradation, Caleb Thornsbury, Christian Castro, Bivin Sadler

SMU Data Science Review

Electric Vehicles (EV) range anxiety remains one of the top barriers for broader adoption. Range anxiety can be attributed to battery pack age and degradation over time. This paper plans to explore how to address this issue by creating a machine learning model that can predict degradation based on usage, temperature, battery chemistry, charging habits and exploring whether other factors tie into range degradation. This research will be using real world charging data along with lab tested chemistry data to build a model that can be chemistry specific for degradation. This paper will help perspective used-EV buyers learn about battery …

Research Of Logic Elements Based On Complementary Bipolar Transistors, Nodira Batirdjanovna Alimova, Nilufar Baxtiyorovna Gulyamova

Chemical Technology, Control and Management

Important parameters for any type of inverter – a NOT logic gate – are the power consumption during switching and the supply voltage. The proposed connection of complementary (two different types) bipolar transistors reduces the current consumption and supply voltage by simultaneously using the cutoff and saturation modes of the bipolar transistors. It has been theoretically and experimentally established that an inverter using complementary bipolar transistors operates at low supply voltages, approximately 0.7 V. Power consumption is virtually independent of the inverter's static state. A method for calculating the transfer characteristic of an inverter using complementary bipolar transistors is developed, …

The Main Errors Of The Ultrasonic Sensor In Measuring Water Flow In Open Channels, Anvar Urolovich Djalilov

Chemical Technology, Control and Management

This article analyzes the use of ultrasonic sensors in measuring water flow and the main errors that may occur in this process. In the conducted scientific research, a time-pulse ultrasonic sensor was tested. The absolute, relative and repeatability errors of the sensor during water flow measurement were studied. The absolute error represents the largest difference between the value recorded by the sensor and the real value, affecting the overall accuracy of the measurement system. This error can vary depending on environmental factors, the design and operating principles of the sensor. During the experiment, the performance of this sensor was …

Synthesis Of An Adaptive Synergistic Fuzzy Discrete Controller For Nonlinear Systems, Isamidin Xakimovich Sidikov, Gulruxsor Murot Qizi Nashvandova, Feruzakhon Botirxon Qizi Sodiqova

Chemical Technology, Control and Management

The paper considers the issues of synthesizing an adaptive fuzzy synergetic controller with discrete time for nonstationary nonlinear dynamic objects. The proposed approach is based on the integrated use of synergetic control principles and fuzzy logic methods, which ensure the formation of a control law for nonlinear dynamic objects that provides asymptotic stability of the control system. Such a hybrid combination makes it possible to guarantee the asymptotic stability of the closed-loop system and to shape the required dynamic behavior of the object over a wide range of operating modes. In addition, this approach provides the ability to adapt to …

Portable Ice Cube Maker, Ayden Ziegler, Emiliano Hansen, Wyatt Engdahl, Dane Hansen

Mechanical Engineering

This Final Design Report outlines the senior design project undertaken by a team of mechanical engineering students at California Polytechnic State University, San Luis Obispo, for the development of a portable backpacking ice cube maker. The project aims to design, build, and test a lightweight, compact device that produces ice cubes for backpackers in remote outdoor environments. The goal is to create a functional prototype that is durable, user-friendly, and suitable for backcountry use. This document details background research, project objectives, and project plan, and current design status.

Sustainabake, Kevin Kunta Swanson Ii

Electrical Engineering

This senior project outlines the development of an oven that utilizes renewable energy to operate safely and effectively. It aims to test building an oven using mostly basic hardware students acquired during their time at Cal Poly and provide a starting point for those interested in creating a solar-powered oven. As our society continues to innovate and increasingly relies on electricity, it is important to place more emphasis on how we can make our lives sustainable to take care of our environment without introducing excessive pollutants. Food preparation is a daily activity that typically involves significant energy consumption, making this …

A Holistic Modelling Framework For Functionally Safe Software Architectures In Embedded Control Systems, Thomas Barth

Doctoral

Embedded control systems are integral to most modern electrified products and an essential backbone of ongoing digitalisation [1]. In this context, these systems increasingly perform safety-critical functions where failures can lead to severe personal injury, environmental damage, or significant economic loss [2]. Consequently, they fall more often within the scope of regulation such as IEC 61508 and its derivatives [3]. At the same time, driven by hardware evolution and market demands, embedded control systems continue to grow in both integration density and functional complexity [4]. These demands necessitate structured development methods that balance compliance with cost-efficiency and development agility. A …

Exploring Noise Induced Extreme Events In Neuronal Oscillators Networks And Machine Learning Forecasts, Hariharan S Mr

Theses and Dissertations

This doctoral dissertation comprehensively investigates the underexplored phenomenon of noise-induced extreme events (EE). The word “extreme” is accompanied by an occurring “event” when the deviation is extreme or higher than that of regular occurrences. These extreme occurrences are rare, abrupt, sudden, and irregular, often causing a profound impact on the system and its surroundings. Tsunami, earthquakes, solar flares, and tornadoes are such events that do not occur often but still significantly cause damage to mankind. This thesis particularly focuses on EE in neuronal systems where sudden synchronization can trigger seizures, tremors, and strokes which serve as classic examples of such …

Flexible Fault-Tolerant Multi-Die Fpga-Based Architectures For Varying Space Environments, Yosof Ali Seif El Din Ali Maklad

Theses and Dissertations

It is well-known fact that spacecraft’s electronic components operate in an extreme harsh and varying space environments, beside changing orbit or passing through Van Allan Belts during orbital course results of radiation levels change. This thesis focuses on SRAM-based FPGA systems on-board of such spacecrafts, that are commonly utilized in space applications’ critical applications due to their capabilities and flexibility to reconfigure, since these systems are vulnerable to frequent negative impacts of ionizing radiation, thus inducing soft and hard errors leading to disastrous failures that could jeopardize the entire spacecraft. The soft errors’ effects are frequent yet can be mitigated, …

Dynamic Multi-Layered Hardware Obfuscation With Behavioral Drift Locking For Sat-Resistant Designs, Ahmed Yehia Salah Mohamed Emish

Theses and Dissertations

The globalization of the semiconductor supply chain has introduced critical vulnerabilities, including intellectual property (IP) piracy, reverse engineering, and hardware tampering. While traditional logic locking offers a baseline of defense, the emergence of powerful Boolean satisfiability (SAT) solvers has rendered many static obfuscation techniques ineffective. This work proposes a Dynamic Multi- Layered Hardware Obfuscation Framework that utilizes Behavioral Drift Locking (BDL) to provide a robust defense-in-depth against advanced adversarial models. The methodology integrates four synergistic layers: • Dynamic Key Management using a time-dependent rotation mechanism that updates keys every clock cycle to prevent static analysis. • Control Obfuscation through opcode …

Optical Fiber Sensors Using Vernier Effect In Cascaded Fiber Interferometers, Zhouchen Wang

Dissertations

The optical Vernier effect has emerged as a powerful tool to enhance the sensitivity of optical fiber interferometer-based sensors, opening new opportunities for developing highly sensitive fiber sensing systems. Optical fiber interferometric sensors based on the Vernier effect are widely used for various applications due to their ultra-compact size, high sensitivity, immunity to electromagnetic interference, electrical isolation, resistance to harsh environments, flexibility, multiplexing capability, and remote operation. The aim of this doctoral thesis was to gain a deeper fundamental understanding of the Vernier effect in optical fiber structures and to develop and investigate a series of novel Vernier effect optical …

Developing A Collaborative Tool To Foster Communication In Sustainability Research, Nina Hunter, Noëlle-Laetitia Perret, Martin Klepal

Electrical & Electronic Engineering

Climate change necessitates urgent responses based on knowledge produced by teams that transcend disciplinary boundaries, and with members whose work focuses on the generation of knowledge and on the application of knowledge, with some integrating both. Almost a third of Europe’s building stock consists of heritage buildings requiring renovation that is ideally sustainable as part of an energy transition response. The European transdisciplinary CALECHE study team with use-cases in France, Italy, Sweden and Switzerland aims to support decision-making on the sustainable renovation of heritage buildings, via research that employs co-design. However, team members are from various disciplines, with different skillsets …

Parking Information And Supervision System, Joshua A. Thum, Alex J. Kinch, Jacob A. Dye

Williams Honors College, Honors Research Projects

In densely populated areas, finding parking can be an arduous and time-consuming struggle, especially in large and tall parking decks. Drivers would benefit from a convenient way to find an open parking spot without having to scour the entire lot first. The goal of this project is to sense available parking spots in a parking garage or parking lot using physical object detection and visual detection with computer vision verification, and display the open spots to drivers entering the lot. This information will be displayed locally at the lot and in an app, with the latter allowing someone to see …

Determining The Electric Field In A 10 Ns Pulsed Plasma In Fuel-Air Mixtures Using Efish, Md Ziaur Rahman, Christopher J. Kliewer, Brian D. Patterson, Chunqi Jiang

Bioelectrics Publications

Transient plasma ignition (TPI) utilizes non-equilibrium plasmas, produced by nanosecond high-voltage pulses, to improve lean-fuel combustion performance and reduce emission. It is known that the relatively high reduced electric field (E/N) in TPI plays an important role in generating energetic electrons and facilitating energy-efficient radical productions, resulting in reliable ignition for lean combustion. Determining the reduced electric field in the discharge is hence important for the understanding of the TPI process and ultimately allowing for the control of the plasma chemistry. This study reports spatiotemporally resolved measurements of the electric field (E) in a 10 ns pulsed plasma that is …

Code-Net++: An Attention-Guided Deep Learning Framework With Grad-Cam-Based Explainability For Covid-19 Detection Using Chest X-Ray Images, Fareesa Amina, Dr Krishnanaik Vankdoth

Mansoura Engineering Journal

Chest radiograph imaging has emerged as a practical and scalable diagnostic modality for respiratory diseases, including COVID-19. However, accurate discrimination of COVID-19 manifestations from other pulmonary abnormalities remains challenging because of low contrast, imaging noise, and overlapping radiographic patterns. This work presents CODE-NET++, an enhanced attention-guided deep learning framework with Grad-CAM-based explainability for reliable COVID-19 detection using chest X-ray images. The proposed framework integrates adaptive trilateral filtering for image enhancement, Reverse Edge Attention Network (RE-Net) for lesion-aware segmentation, and an Enhanced LinkNet architecture with dilated convolutions for multiscale feature extraction and classification. Grad-CAM-based explainable artificial intelligence visualization is incorporated to …