Structural Engineering Commons^™

Static And Ultimate Load Behavior Of Cold-Formed Steel Joint Residential Floor Systems, R. J. Kudder, P. W. Linehan, J. F. Wiss

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Dynamic And Human Response Behavior Of Cold-Formed Steel Joint Residential Floor Systems, P. W. Linehan, R. J. Kudder, J. F. Wiss

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Strength Of Cold Formed Steel Shear Diaphragms, S. Chockalingam, Paul Fazio, Kinh Ha

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Developments In Inexpensive Lightweight Structures, Michael J. Davies

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Experimental Study On Seismic Behavior Of Industrial Storage Racks, Helmut Krawinkler

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Experimental Investigation Of Steel Stud Shear Wall Diaphragms, Cynthia S. Mccreless, Thomas S. Tarpy Jr.

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

This paper presents the results of an experimental full scale test program for determining design information for shear wall diaphragms constructed of steel studs and gypsum wallboard with different aspect ratios. Wall construction used is representative of the type of construction commonly used for interior wall partitions. Testing is performed in accordance with- ASTM E 564 - 76.

Design Of Composite Floors With Profiled Steel Sheet, Jan W. B. Stark

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Contents And Preface -- Volume Ii, Wei-Wen Yu, Joseph H. Senne

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Edge Stiffeners For Cold-Formed Steel Members, Teoman Peköz,, George Winter, T. P. Desmond

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Applicability Of Limit Design To Cold Formed Box Beams, Paul H. Sanders, Jerry Householder

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Stability Analysis Of Locally Buckled Frames, Shien T. Wang, George E. Blandford

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Strength Of Cold-Formed Steel Studs Exposed To Fire, K. H. Klippstein

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

High-Rise Rack-Supported Building A Unique Application Of Cold-Formed Steel Members, Ching Fung

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Fatigue Experiments On Composite Slab Floors, George Abdel-Sayed, M. C. Temple

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Report On Proposed Standards For Sheet Steel Structural Welding, Omer W. B. Blodgett

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Connections In Cold-Formed Sections And Steel Sheets, A. W. Tomà, Jan W. B. Stark

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Maximum Load Design Of Cold Formed Steel Shapes, A. Hasegawa, Niels C. Lind, W. Brent Hall

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Local Buckling Tests On Three Steel Large-Diameter Tubular Columns, A. Ostapenko, S. X. Gunzelman

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

European Research On Pallet, Drive-In And Drive-Through Racks, Jan W. B. Stark, Kees Tilburgs

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Webs For Cold Formed Steel Flexural Members Structural Behavior Of Beam Webs Subjected To Web Crippling And A Combination Of Web Crippling And Bending, Wei-Wen Yu, Nipon Hetrakul

CCFSS Library (1939 - present)

Since 1973, a research project on webs for cold-formed steel flexural members has been conducted at the University of Missouri-Rolla under the sponsorship of American Iron and Steel Institute. This study deals with the structural behavior of beam webs subjected to bending stress, shear stress, combined bending and shear, web crippling and the effect of bending on web crippling load. In addition, it includes a study of beam webs reinforced by either transverse or longitudinal stiffeners. This report presents the research findings on web crippling and combined web crippling and bending for cold-formed steel beams having unreinforced webs. The results …

Webs For Cold-Formed Steel Flexural Members Structural Behavior Of Beam Webs Subjected To Bending Stress, Wei-Wen Yu, Roger A. Laboube

CCFSS Library (1939 - present)

Since 1973, a research project on webs for cold-formed steel flexural members has been conducted at the University of Missouri-Rolla under the sponsorship of American Iron and Steel Institute. This study deals with the structural behavior of beam webs subjected to bending stress, shear stress, combined bending and shear, web crippling and the effect of bending on web crippling load. In addition, it includes a study of beam webs reinforced by either transverse or longitudinal stiffeners. This report presents the research findings on unreinforced beam webs subjected to bending stress. The results for the study of beam webs subjected to …

Webs For Cold Formed Steel Flexural Members Structural Behavior Of Beam Webs Subjected Primarily To Shear Stress, Wei-Wen Yu, Roger A. Laboube

CCFSS Library (1939 - present)

Since 1973, a research project on webs for cold-formed steel flexural members has been conducted at the University of Missouri-Rolla under the sponsorship of American Iron and Steel Institute. This study deals with the structural behavior of beam webs subjected to bending stress, shear stress, combined bending and shear, web crippling and the effect of bending on web crippling load. In addition, it includes a study of beam webs reinforced by either transverse or longitudinal stiffeners. This report presents the research findings on the unreinforced beam webs subjected primarily to shear stress. The results obtained from the study of beam …

Webs For Cold Formed Steel Flexural Members Structural Behavior Of Beam Webs Subjected To A Combination Of Bending And Shear, Roger A. Laboube, Wei-Wen Yu

CCFSS Library (1939 - present)

Since 1973, a research project on webs for cold-formed steel flexural members has been conducted at the University of Missouri-Rolla under the sponsorship of American Iron and Steel Institute. This study deals with the structural behavior of beam webs subjected to bending stress, shear stress, combined bending and shear, web crippling and the effect of bending on web crippling load. In addition, it includes a study of beam webs reinforced by either transverse or longitudinal stiffeners. This report presents the research findings on the unreinforced beam webs subjected to a combination of bending and shear. The results obtained from the …

Tests On Puddle Weld Connections, William Mcguire, J. W. Struble, Teoman Peköz

CCFSS Library (1939 - present)

PREFACE This non-interpretive report contains the results of 90 tests on circular and oblong puddle weld connections. The connections involved test specimens constructed of flat steel plates and thin connecting sheets of varying thicknesses (10 to 28 gage) with the welds to be studied forning the bond between them. Testing consisted of tensile loading to ultimate failure. This work was carried out under contract with the Engineering Division of the American Iron and Steel Institute.

Strength Of Arc-Spot Weld In Sheet Steel Construction, Ching Fung

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The weld used by the steel deck erectors to anchor steel decking to structural steel framing is commonly known as "Puddle Weld". It is formed by arc-welding with stick electrodes to "melt" through the deck, resulting in puddle of molten steel durinlj the welding operation. Hence, the weld is commonly referred to in the trade as "Puddle Weld". Since the inception of this research projE:ct, this type of weld has been given a new technical name -the "Arc-Spot Feld" to reflect the actual welding process and the formation of the weld.

Low Cost Fencing, Department Of Agriculture, Western Australia

Journal of the Department of Agriculture, Western Australia, Series 4

Fences with more wire and posts are not necessarily stronger.

Design using high tensile wire can save on materials and reduce costs.

Steel Deck Institute Design Manual For Form Decks And Roof Decks, Steel Deck Institute

Steel Deck Institute (SDI) Specifications and Manuals (1939 - present)

No abstract provided.

Web Crippling Strength And A Combination Of Bending And Web Crippling Of Cold-Formed Steel Beams, Nipon Hetrakul

Doctoral Dissertations

"The web crippling strength of cold-formed steel beams was investigated experimentally. In this investigation, due consideration was given to the possible influence of bending moment and shear force on the web-crippling loads.

For the subject of web crippling strength, the study involved the testing of 140 built-up beams having single unreinforced webs and 152 I-beams having double webs. In addition, 66 beam tests were conducted for the case of combined bending moment, shear and web crippling.

The experimental results obtained from the beam tests conducted at the University of Missouri-Rolla and the early tests performed previously at Cornell University were …

Report Of Laboratory Tests And Analytical Sudies Of Structural Characteristics Of Cold-Formed Steel-Joist Floor Systems, J. F. Wiss, P. W. Linehan, R. J. Kudder

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Steel Roof Deck Design Manual, Steel Deck Institute

Steel Deck Institute (SDI) Specifications and Manuals (1939 - present)

No abstract provided.