Structural Engineering Commons^™

Matlab Shake Table Control And Data Acquisition System, Abigail Austin

Architectural Engineering

The College of Architecture and Environmental Design’s (CAED) seismic laboratory shake table is used for earthquake engineering education and experimental testing. However, the existing control system is outdated and difficult for students unfamiliar with the system to operate. The objective of this project was to develop a MATLAB-based control and data acquisition application to simplify shake table operation and improve accessibility, of both operation and output, for student users.

The developed application imports earthquake acceleration records, scales the input motions to the operational limits of the shake table, and executes the desires motion through the existing hardware system. Experimental data …

Reinforced Concrete Design Fundamentals, Belen Stephanie Martinez Espinoza, Estevan Jacob Perez

Architectural Engineering

Hispanic workers make up a large and growing portion of the construction workforce in the United States; particularly in California, the percentage of construction workers who are Hispanic is estimated to be about 55% as of 2021 (Elkins). Many of these workers are Spanish-speaking, yet there is still a gap between technical engineering design and what is understood and applied in the field. One major reason for this gap is the lack of clear bilingual resources. To bridge the gap, a 48-page bilingual booklet titled Reinforced Concrete Design Fundamentals (Fundamentos del Diseño de Concreto Reforzado in Spanish) was created. This …

Design And Construction Of Caed Support Shop Steel Fence On Existing Cmu Wall, Jared Gustavo Martinez, Agustin Dominguez Jimenez

Architectural Engineering

This project involved the design, testing, fabrication, and construction of a new steel fence system for the CAED support shop at California Polytechnic State University, San Luis Obispo. The fence was designed to attach to an existing CMU wall and serve as a future attachment point for a removable shade canopy system. Experimental testing was performed on multiple turnbuckles to establish a conservative design load for the structural design of the fence posts, baseplates, welds, and anchorage connections. In addition to meeting structural requirements, the project incorporated architectural elements inspired by the original fence and surrounding CAED shop environment. The …

Tanzania Mbesese Initiative 2026, June Ezzell, Sam Liebman, Noah Beyer, Kate Hamilton, Luke Vollert, Kylee Borgen, Cody Balazs, Meg Mclaughlin

Architectural Engineering

The Tanzania Mbesese Initiative 2026 Senior Project supports a multi-year design-build effort to establish the Same Polytechnic College in Same, Tanzania. This community faces high poverty levels and limited access to higher education, necessitating sustainable infrastructure to support tertiary education. To prepare for the upcoming July phase of construction, an eight-student Architectural Engineering team designed three practical and resilient structures: a Shade Structure, a Water Collection Structure, and a Reusable Scaffolding system. The final design applied structural analysis, modeling, and hand-tool fabrication practice to balance material efficiency with long-term structural durability. The deliverables provide comprehensive construction documentation, complete material takeoffs, …

Design And Implementation Of A Honeycomb Damping System For The 2026 Eeri Seismic Design Competition, Vera Nguyen, Lauryn Wojcik

Architectural Engineering

The authors of this report were a part of the 2026 Earthquake Engineering Research Institute (EERI) chapter at California Polytechnic State University, San Luis Obispo. In July 2026, they will travel to Portland, Oregon with 12 students to compete in the Undergraduate Seismic Design Competition hosted by EERI. The competition required teams to develop a comprehensive structural design proposal that included computer-based modeling and analysis, construction of three physical models, and the preparation of both a technical poster and oral presentation for a proposed high-rise building located in Portland, Oregon. Cal Poly’s “Illahee Tower” was designed with an emphasis on …

Exploring The Role Of Video Games In Civil Engineering Education And K-12 Stem Engagement, Jillian S. Codron

Architectural Engineering

Civil engineering education has traditionally emphasized a linear progression from theory to application, with foundational concepts introduced in lecture before being reinforced through laboratory or design experiences. While effective for advanced learners, this approach can limit early engagement for K–12 students who may struggle to connect abstract principles to realworld engineering practice. This project examines the use of video games as interactive, feedback-driven environments for introducing civil engineering concepts and practices to younger learners in more exploratory and accessible ways.

The study pursues four primary objectives: evaluating the educational affordances of selected video games; examining how gaming experiences have influenced …

Creation Of The 2-Way Cross Laminated Timber Subroutine For Computing Dynamic Analysis Parameters, Joseph Freitas

Architectural Engineering

This document will describe the inputs, methodology, and outputs for the CLT 2-way subroutine for cases with and without openings recently added to a proprietary structural analysis software. For the sake of simplicity, most of the discussion will be focused on cases without openings from here on out, as the verification process for a novel method for cases with openings is still in progress. The CLT 2-way module calculates multi-point resistance functions for panels without openings by automating the procedure outlined in an industry-standard structural design manual. The subroutine also finds the appropriate dynamic response factors, kinetic load multipliers, mass, …

Tettoia Iperbolica, Lydia Chou, Jack L. Walsh, William Jasper Mors, Simarjot S. Gandhoke, Ian F. Da Silva, Jamie L. Zimmerman

Architectural Engineering

Tettoia Iperbolica (Hyperbolic Canopy) is a multidisciplinary senior project created to revitalize an underutilized outdoor space next to the Architectural Engineering Building 21 at Cal Poly. The project responds to needs identified by faculty and staff, including limited gathering space, inadequate shading for the adjacent conference room, poor drainage, and a lack of ADA accessibility. Building on two previous senior project efforts, the 2025 team advanced the concept into a fully designed, structurally stamped, permitted redwood canopy supported by existing concrete columns and one new steel column.

The work included extensive site investigation to verify subsurface conditions, concrete strength testing, …

The Xenaform, Cassadie J. Golding

Architectural Engineering

The XenaForm explores how complex, expressive structures can emerge from simple, low-tech construction methods using principles of parametric design and structural geometry. By combining folded plate techniques with modular tetrahedral components, the project bridges high-tech digital modeling and hands-on physical fabrication. The result is a lightweight, buildable system that reclaims the engineer’s role as a form-finder.

Architectural Engineering Institute: International Student Design Competition 2025, Alexandra Marie Kersting, Alec Thomas Gibbs, Haley Francesca Sousa, Kline Genevieve Nickel

Architectural Engineering

The AEI International Student Design Competition is an annual competition held by the Architectural Engineering Institute that aims to replicate an integrated building design process. The 2025 Cal Poly team consisted of 4 Architectural Engineering students, each competing in the Structural and Integration disciplines. The team was provided a set of architectural drawings and a 3D architectural Revit model of Carson Headquarters in Omaha, Nebraska. The team was tasked with the creation of a complete structural design as well as a discussion of integration of other building design disciplines.

Prefabricated Timber Living: A Modular Sustainable Solution, Hannah Giang, Justin Huang

Architectural Engineering

This senior project is part of the Gateway Decathlon, a two-year, multidisciplinary design-build competition focused on innovative, sustainable housing solutions. Our team designed and constructed a one-story dwelling using cross-laminated timber (CLT) panels to promote low-carbon, industrialized building practices. The structure features a modular layout with sloped roofs and exposed timber interiors, combining environmental responsibility with architectural flexibility. Emphasizing prefabrication and off-site construction, the design supports efficient assembly and disassembly, reduced material waste, and minimal environmental impact. The result is a scalable, adaptable housing prototype aligned with the competition’s goals of creativity, sustainability, and innovation in residential construction.

Analyzing Tms 402 -22 : Design Of Special Reinforced Masonry Shear Walls, Tristan D. Aranda

Architectural Engineering

This experiment examines possible inconsistencies in the TMS 402-22 masonry code between Section 7.3.2.5 and Section 9.3.5.6.2, regarding the requirements for special boundary elements in Special Reinforced Masonry Shear Walls. By investigating the two sections, it can be determined whether the two sections are in accordance with each other regarding aspect ratio. Tensile forces and strains are calculated respectively for each wall and block type and are compared to the respective tensile yield forces and ductile strains. This determines which respective boundary elements go past yield and become ductile. Based on this determination, recommendations can be made to the …

Engineering-Enhanced Theatre: How Engineering Involvement Can Aid Regional Theatres, Albert M. Le

Architectural Engineering

Engineering and theatre are disciplines not often associated with each other within regional and small theatre companies in the United States. The distinction between the two fields of study is not simply from the fundamental differences between how each field is taught and practiced, but also the difficulties encountered within a scope of theatre often constrained with limited budget and time for each production. However, when beginning to explore the intersection between engineering and theatre, it is found that the empirical nature of current theatrical practices can be countered, and scenic design and construction can be re-envisioned with engineering involvement …

Innovations To Increase Plywood Shear Wall Design Capacity And Resiliency, "Mega Walls", Through Ductile Metal Strapping, Trevor Douglas Reichenberg, Tara Suzanne Reich, Katelyn Marie Lowry

Architectural Engineering

The researchers of this project are three undergraduate Architectural Engineering students at California Polytechnic State University, San Luis Obispo. Plywood shear walls are common structural elements in timber structures that resist lateral forces. Since their introduction to the industry in the 1950s, their shear capacities have remained essentially unchanged amongst the innovations of other wooden lateral systems. Prior to this project, Cal Poly undergraduate researchers have taken on the challenge of modernizing the shear wall. The “MeGa Wall” project was born: a system that implements metal gauge strapping which enhances a conventional wall by reducing nail connection failures. Full-scale experimental …

Structural Health Monitoring In A Small-Scale Environment Using Wired And Wireless Communication Device Readings, Gabriela Mcclure

Architectural Engineering

Our goal with this project is to test and develop a structural health monitoring (SHM) device capable of assessing the safety and integrity of building connections and overall structural health. At Cal Poly, a large portion of our structural engineering curriculum focuses on the design of buildings in response to earthquakes and the damage that can be mitigated through proper design. The increasing accessibility of technology in our world allows for the growth and development of systems that can enhance building safety and help us better understand how building practices can evolve to continue prioritizing life safety. Structural health monitoring …

Cardboard Concrete Column Formwork, Danny Shrestha, Joelle Schalesky

Architectural Engineering

This project is an exploration of cardboard as a potential material for construction formwork for concrete columns. Multiple material tests were conducted to explore the behavior of cardboard and concrete. Multiple specimens of cardboard were tested for modulus of elasticity, moment of inertia, and tensile strength. Concrete was tested for its apparent lateral fluid pressure under vibration. Cardboard formwork was then designed and constructed based on these tested behaviors. The final design of the formwork consisted of folding cardboard sheets lined with hardboard, supported by wood studs, and tied by plastic banding straps.

Ultimately, two concrete columns―8' and 10' in …

Moment Monument, Brayden Alec Martinez, Carsten Walker Huber, Gaspar Emmanuel Solorio, Jared Thomas Schieferle

Architectural Engineering

We designed our project, dubbed the Moment Monument, in part to live out our dream of applying engineering and design skills towards creating a lasting impression on Cal Poly’s campus, as well as to develop a visual aid for future engineering students in steel design classes. The Moment Monument is in the Experimental Structures Laboratory, which is a space in the university’s ‘Poly Canyon’ that is reserved for students to build and test different applications of architecture, structural engineering, and construction. In recent years, it has been diffi cult to receive approval to build in the canyon due to high …

Reliability Of Using Secondary And Tertiary Treated Wastewater In Concrete Mixing And Curing, Amany G. Micheal Prof., Haidy Abd El Salam

Architectural Engineering

Water scarcity is a problem that faces many regions. In a developing and arid countries, the need for fresh water is exponentially increasing. One of the most water consuming industries is the construction industry, especially in concrete manufacturing. This research is an evaluation of the Reliability of recycled wastewater to be used in concrete manufacturing. Two different wastewater treatment regimens are implemented: secondary and tertiary treated wastewater. The treated wastewater, either secondary or tertiary, replaces potable water with percentages of 25%, 50%, and 100%. The mixture of the two types of water is used in concrete mixing and curing. Control …

Testing Of Recycled Polypropylene As A Viable Structural Material (Quarter 2), Isabella Jimenez-Melendrez, Katherine Timbes, Jocelyn Embleton, Tauni Dela Cruz, Zyra Kingston, Emily Byrd, Jacob Stinger

Architectural Engineering

5.25 trillion plastic particles have been found in the oceans each year, 3 million water bottles are consumed each hour, and one million plastic bags are used each minute in the United States of America (Williams). The vast majority of conventional plastics such as polyethylene, polypropylene, polystyrene, and more, are non-biodegradable (Tokiwa). To make matters worse, 70% of this non-biodegradable plastic is discarded into landfills and inevitably makes its way into the environment (Williams,). Plastic products have become vital to the United States economy due to their many uses in the construction, packaging, transportation, and health care industries. However, this …

Implementation Of Fluid Viscous Damper For 2023 Eeri Seismic Design Competition, Dalton J. Muck, Payton S. Mcgee, Payton R. Filippin, Tynan Castro

Architectural Engineering

The authors of this report were a part of the 2023 Earthquake Engineering Research Institute (EERI) student chapter for California Polytechnic State University, San Luis Obispo (Cal Poly). With thirteen other team members, they traveled to San Francisco, CA to compete in the Seismic Design Competition (SDC) hosted by EERI. The team was tasked with preparing a written proposal, design and computer analysis of the structural system, construction of two physical models, as well as creation of a poster and a presentation for a proposed mid-rise building located in the competition host city. The goal of the design of Cal …

The Design And Construction Of A Radio Telescope, Avery Elizabeth Bunting, Kira Hope Tolman

Architectural Engineering

Two architectural engineering students and an electrical engineering student worked together to design and build a radio telescope that is capable of using hydrogen line astronomy to map the galaxy. The telescope is made entirely out of aluminum, which, combined with small deflection limits, made for an iterative design process that focused primarily on constructability and supporting the desired outcomes of the electrical side.

Xenabloom, Sophia Maglabe, Ryer Lauth, Elizabeth Shaw, Sheyna Rongong

Architectural Engineering

Proposal for an architectural and structural design of a shade structure at the Leaning Pine Arboretum, employing the Xenaform typology of Poly Shells, LLC.

Investigation Of Natural Pozzolans: Analyzing The Practicality Of Natural Pozzolans As A Partial Substitute For Cement In Grout Production, Jadyn I. Breien, Andrew J. Baro, Logan T. Marino

Architectural Engineering

This senior project aims to investigate whether natural pozzolans are more sustainable than fly ash and a sufficient substitute for cement in the production of grout. By following the intent of the ASTM (American Society of Testing and Materials) standards, a conclusion will be made to determine if natural pozzolans can contribute comparable strength in compression. The objective is to prove that natural pozzolans should be utilized in the production of grout rather than alternatives such as fly ash because it can provide similar strength while being more economical and more sustainable.

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Slo Botanical Garden Deck, Noah E. Demer

Architectural Engineering

This project consists of the design and construction of an outdoor-use deck. This deck is to be located in the NE corner of the Sage Meadow at the San Luis Obispo Botanical Garden at 3450 Dairy Creek Rd, San Luis Obispo, CA 93405. This deck’s intended use is as a gathering area for people to congregate. Originally, the ideal deck area was proposed as 700+ square feet, but with further site and project limitations the final design was ~480 square feet. This deck has not been constructed.

Timber Box Header Using Bamcore Side Panels: A Senior Project Study, Jonathan Frank Herrera

Architectural Engineering

The purpose of this study was to begin development of a composite box header that was able to span long openings with minimal deflection. The headers in study were comprised of BamCore side panels, nailed top and bottom each face to a 2x6 top plate, and a header of multiple specified sizes. The 2x6 top plate and headers ranging from a 6x6 to a 6x12 were made up of Douglas Fir-Larch, No.1. Analysis was performed assuming 10d common nailing at top and bottom of the BamCore side panels. Initial analysis of a composite box header was performed and analyzed as …

Use Of Precious Plastic Method Of Bricks For The Construction Of Tiny Homes, Haylie E. Tallon

Architectural Engineering

Precious Plastics, a Netherlands based company, created an open source project that can be used to create different objects from recycled plastics. The San Luis Obispo area has a large amount of recyclable plastic that is being treated as trash, adding to the pollution of the ocean and the air. This project is to determine the necessary steps to create plastic building blocks, using the Precious Plastic process, as a construction material for low-income, temporary housing. This report covers the process that was used to build two of the machines that will be used to create the bricks. This requires …

Schematic Design And Peer Review Of Gayaza Medical Center And Walk-In Clinic, Abigail Coffing, Alexis Buhr

Architectural Engineering

This report outlines the structural portion of the work done for the Gayaza Medical Center in Kampala, Uganda. This project was funded by HIINGA, an impact fund doing work in Eastern Africa, who tasked an interdisciplinary group of Cal Poly students with developing a preliminary design for the the medical center. The team consisted of Annebel van der Meulen (architecture), Abigail Coffing and Alexis Buhr (structural), and Arley Landis and Brett Shank (construction management). After completing the initial design, the structural team at Cal Poly rejoined the project the following quarter to do a peer analysis of the finalized structural …

Dynamic Response Of Elastic Two-Story Steel Moment Frame Scaled Structure Equipped With Viscous Dampers, Garrett L. Barker, Alexander L. Poirier

Architectural Engineering

The authors of this report are Architectural Engineering undergraduate students at California Polytechnic State University, San Luis Obispo. Damping is a complex, experimentally derived value that is affected by many structural properties and has a profound effect on the dynamic response of structures. Deducing the inherent damping of a steel moment frame and affecting the damping ratio with viscous dampers are two topics explored in this paper. Dampers are commonly implemented in resilient structures that perform better in a design basis earthquake, reducing the seismic cost and downtime. Undergraduate coursework does not delve into the factors that affect damping and …

Guidelines For The Eeri Seismic Design Competition, Kate Robinson

Architectural Engineering

The Earthquake Engineering Research Institute (EERI) has been dedicated to exposing undergraduate students to the wide range of interdisciplinary subjects related to earthquake engineering through the Seismic Design Competition. In 2022, California Polytechnic State University, San Luis Obispo (Cal Poly) sent 14 students to Salt Lake City, Utah for the competition – to compete with 31 other teams who all tackled the competition problem statement uniquely. The 2022 team was tasked with the research, design, analysis, and construction of a new structure to be built in downtown Salt Lake City, with the goal of replicating the design sequence of real-world …